ASSA ABLOY ACCENTRA 662F Trim for 1500(F), 6100ED(F), and 7100(F) Series Wide Stile Mortise_7400-1662

662F Trim With 1530(F), 6130(F) or 7130(F) Series Mortise Exit Devices RESPONSIBILITY DOOR AND FRAME MANUFACTURERS ARE RESPONSIBLE FOR PROVIDING ADEQUATE CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN. OUTSIDE FACE OF DOOR 662F Section X - X 11/16" (17.5) 1/2" (12.50) Dia. Thru Door 1-3/8" (34.9) 2-1/16" (52.4) Inside Face Of Door 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. 5. Shaded area represents mortise lock cavity from device template. 6. Prepare mounting holes when installing trim. 7. Provide adequate structural support to maintain door integrity during operation. NOTES : 3/8" (9.50) Dia. Thru Door (4 Places) CL Vertical Reference (Trim Centerline) CL X 3-5/8" (92) 3-5/8" (92) 9-1/2" (241.3) 1-1/2" (38.1) Dia. Thru This Face X Horizontal Reference (Device Centerline)

Wood or Composite Door Preparation

7400-1662 DATE

12-23

SUPERSEDES DO NOT SCALE DRAWING

7400-1662 (05-15)

TEMPLATE NUMBER

Experience a safer and more open world

ALL ARCHITECTURAL BUILDERS HARDWARE MUST BE INSTALLED ON PROPERLY REINFORCED DOORS AND FRAMES, REGARDLESS OF TYPE,

MATERIAL, OR METHOD OF CONSTRUCTION. Contact us for support at 1-800-438-1951.