ASSA ABLOY ACCENTRA 661F Trim for 1500(F) and 7100(F) Series Wide Stile Mortise Nightlatch (03_7400-1661

OUTSIDE FACE OF DOOR 661F Section X - X 11/16" (17.5) 1-3/8" (34.9) 2-1/16" (52.4) Inside Face Of Door 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. 5. Shaded area represents mortise lock cavity from device template. 6. Prepare mounting holes when installing trim. 7. Provide adequate structural support to maintain door integrity during operation. NOTES : 3/8" (9.50) Dia. Thru Door (4 Places) CL CL Vertical Reference (Trim Centerline) CL X 3-5/8" (92) 3-5/8" (92) 1-1/2" (38.1) Dia. Thru This Face X Horizontal Reference (Device & Trim Centerline)

RESPONSIBILITY

DOOR AND FRAME MANUFACTURERS ARE RESPONSIBLE FOR PROVIDING ADEQUATE CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN. ALL ARCHITECTURAL BUILDERS HARDWARE MUST BE INSTALLED ON PROPERLY REINFORCED DOORS AND FRAMES, REGARDLESS OF TYPE,

661F Trim With 1530(F) or 7130(F) Series Mortise Exit Devices

Wood or Composite Door Preparation

MATERIAL, OR METHOD OF CONSTRUCTION. Contact us for support at 1-800-438-1951.

SUPERSEDES DO NOT SCALE DRAWING 7400-1661 (08-12)

TEMPLATE NUMBER

7400-1661 DATE

12-23