ASSA ABLOY ACCENTRA 634F Trim for 1500(F), 2100(F), 6100ED(F), and 7100(F) Series Wide Stile Rim_7400-1634

634F Trim RESPONSIBILITY DOOR AND FRAME MANUFACTURERS ARE OUTSIDE FACE OF DOOR Horizontal Reference (Device Centerline) 634F Section X - X 11/16" (17.5) 1-3/8" (34.9) Inside Face Of Door 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. 5. Provide adequate structural support to maintain door integrity during operation. NOTES : 1/2" (12.7) Dia. Thru Door CL Vertical Reference (Trim Centerline) CL X 3/8 (9.5) Dia. Thru Door (4 Places) 3-5/8" (92) 9-1/2" (241.3) 3-5/8" (92) X

RESPONSIBLE FOR PROVIDING ADEQUATE CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN. ALL ARCHITECTURAL BUILDERS HARDWARE MUST BE INSTALLED ON PROPERLY REINFORCED DOORS AND FRAMES, REGARDLESS OF TYPE,

With 1500(F), 2100(F), 6100(F) or 7100(F) Series Rim, Mortise and Vertical Rod Exit Devices

Wood or Composite Door Preparation

MATERIAL, OR METHOD OF CONSTRUCTION. Contact us for support at 1-800-438-1951.

SUPERSEDES DO NOT SCALE DRAWING 7400-1634 (05-15)

TEMPLATE NUMBER

7400-1634 DATE

12-23