ASSA ABLOY ACCENTRA 633F Trim for 1500(F), 2100(F), 6100ED(F), and 7100(F) Series Wide Stile Rim_7400-1633

OUTSIDE FACE OF DOOR Horizontal Reference (Device Centerline) 633F Section X - X 11/16" (17.5) 1-3/8" (34.9) Inside Face Of Door 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. 5. Provide adequate structural support to maintain door integrity during operation. 6. Dimensions given about a centerline are symmetrical. 7. Unspecified radii 1/8 (3.20) maximum. NOTES : 1/2" (12.7) Dia. Thru Door CL Vertical Reference (Trim Centerline) CL X 3/8 (9.5) Dia. Thru Door (4 Places) 3/4" (19) Radius - Typ. Cutout 1-1/4 (32) Deep Outside Face 3-5/8" (92) 9-1/2" (241.3) 3-5/8" (92) 2-5/8" (67) 2-1/8" (54) 1/2 (12.7) Dia. 1-1/4" (32) CL CL X

RESPONSIBILITY

DOOR AND FRAME MANUFACTURERS ARE RESPONSIBLE FOR PROVIDING ADEQUATE CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN. ALL ARCHITECTURAL BUILDERS HARDWARE MUST BE INSTALLED ON PROPERLY REINFORCED DOORS AND FRAMES, REGARDLESS OF TYPE,

633F Trim Application With 1500(F), 2100(F), 6100(F) or 7100(F) Series Rim and Vertical Rod Exit Devices

Wood or Composite Door Preparation

MATERIAL, OR METHOD OF CONSTRUCTION. Contact us for support at 1-800-438-1951.

SUPERSEDES DO NOT SCALE DRAWING 7400-1633 (05-15)

TEMPLATE NUMBER

7400-1633 DATE

12-23

Experience a safer and more open world