ASSA ABLOY ACCENTRA 630F Trim for 1500(F), 2100(F), 6100ED(F), and 7100(F) Series Wide Stile Rim_7400-1630

OUTSIDE FACE OF DOOR Horizontal Reference (Device Centerline) 630F Section X - X 11/16" (17.5) 1-3/8" (34.9) Inside Face Of Door 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. NOTES : 3/8" (9.5) Dia. Thru Door (4 Places) CL Vertical Reference (Trim Centerline) CL X X 3-5/8" (92) 3-5/8" (92)

RESPONSIBILITY

DOOR AND FRAME MANUFACTURERS ARE RESPONSIBLE FOR PROVIDING ADEQUATE CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN. ALL ARCHITECTURAL BUILDERS HARDWARE MUST BE INSTALLED ON PROPERLY REINFORCED DOORS AND FRAMES, REGARDLESS OF TYPE, MATERIAL, OR METHOD OF CONSTRUCTION. Contact us for support at 1-800-438-1951.

630F Trim With 1500(F), 2100(F) or 7100(F) Series Rim, Mortise and Vertical Rod Exit Devices

Wood or Composite Door Preparation

SUPERSEDES DO NOT SCALE DRAWING 7400-1630 (08-12)

TEMPLATE NUMBER

7400-1630 DATE

12-23