ASSA ABLOY ACCENTRA 581F, 586F, 588F and 589F Trim for 2100(F), 6100(F) and 7100(F) Series Template_7400-0581

Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Copyright © 2008, 2015, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

Notes: 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. 5. For door reinforcement see template 7400-0000. 6. Prepare mounting holes when installing the trim. Provide adequate internal support to prevent door deformation after trim is bolted to the door. At specifier's option ANSI/BHMA A156.115 cutout thru door may be ★ 581F ★ 588F substituted. If type 161 stock doors are used a filler plate (by others) is required for the door edge. ★ 586F ★ 589F Lever handle design prefixes "AU", "MO" or "PB" 9. Dimensions given about a centerline are symmetrical. OUTSIDE FACE OF DOOR (2) 1/2 (13) Dia x 5/16 (8) Dia Thru 11/16 Inside Face (17.5) Of Door- $\backslash frac\{3-5/8\}\{(92)\}$ 2-1/8 (54) Dia x 7/8 (22) Deep 1 - 3/8(See Note 8) (35) Dia.-HORIZONTAL REFERENCE (Device and Trim) 1-3/8 (35)<u>1/2</u> Dia Thru (13)(92)VERTICAL REFERENCE (2) 3/8 (9.5) Dia (Device and Trim) x 7/32 (5.5) Dia Thru Section X - X 581F, 586F, 588F and 589F Trim 1-800-438-1951 Yale www.yalelocks.com With 2100(F), 6100(F) or 7100(F) Series Rim and Vertical Rod Exit Devices

An ASSA ABLOY Group brand ASSA ABLOY

Metal Door Preparation

TEMPI ATE NUMBER

7400-0581

DATE

05-15