ASSA ABLOY ACCENTRA 575F Trim for 1530(F) or 7130(F) Narrow Stile Mortise Wood or Composite Doors_7400-1575

Printed in U.S.A. 7400-1575

1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. 5. Shaded area represents mortise lock cavity from device template. 6. Provide adequate structural support to maintain door integrity during operation. Inside Face 575F Of Door OUTSIDE FACE OF DOOR Vertical Reference (Trim Centerline) L Horizontal Reference (Device Centerline) (44) 3/4 (19) Radius (Typical) 3-5/8(92)Slot 1-3/8 (35) Deep (38.1)3/8 (9.5) Dia. Thru Door (4 Places) 9-15/16 1-3/8 (252)(34.9) 11/16 1/2 (12.7) Dia. Thru Door Χ Section X - X

575F Trim Application With 1530(F) or 7130(F) Series Mortise Exit Devices Wood or Composite Door Preparation

Yale

Yale Commercial Locks and Hardware

www.yalecommercial.com

TEMPLATE NUMBER

7400-1575

9-06