ASSA ABLOY ACCENTRA 541F, 546F, 548F and 549F Trim for 2100(F), 6100ED(F), and 7100(F) Series Narrow_7400-0541

Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Copyright © 1999, 2015, Yale Security Inc., an ASSA ABLOY Group company.

Notes: 1. This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template. 2. Do not scale drawing. 3. Dimensions are in inches (mm). 4. LHR door shown. Preparation is typical for both door hands. 5. For door reinforcement see template 7400-0000. 6. Prepare mounting holes when installing the trim. 7. Provide adequate internal support to prevent door deformation after trim is bolted to the door. 8. At specifiers option ANSI A115.2 cutout thru door may be substituted. If type 161 stock doors are used a filler plate (by others) is required for the door edge. 9. Dimensions given about a centerline are symmetrical. 10. Omit for 549F. 548F 549F 541F 546F 2-15/32 (62.7) 5/32 (4.00) 1-15/64 (31.4) Lever handle design prefixes "AU","MO" or "PB" 1/2 (12.50) Dia. (See Note 10) OUTSIDE FACE OF DOOR X 2-1/8 (54.00) Dia. Thru This Face (See Note 8) 1-3/8 (34.9) 3/8(9.50) Dia. This Face 7/32 (5.50) Dia. Inside Face (2 Places) CL Horizontal Reference (Device and Trim Centerline) 1-3/8 (34.9) Inside Face Of Door All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

541F, 546F, 548F and 549F Trim With 2100(F), 6100(F), or 7100(F) Series Rim and Vertical Rod Exit Devices Metal Door Preparation

Section X - X

www.yalelocks.com 1-800-438-1951

TEMPLATE NUMBER DATE

CLVertical Reference (Trim Centerline)

X

7400-0541

05-15