ASSA ABLOY ACCENTRA 5400LN Series Cylindrical Locks 80, 81, 90, 91 (Electric) Functions 2-3, 4, 3-3, 4, and 5 B…_7150-8006

Beveled Edge

Universal or

Square Edge

1-3/4 (44) to 2-1/4 (57)

Std. Door Thickness

See Note 3

Notes:

1. Do not scale drawing

2. For strike preparation refer to: 495 Strike - Template No. 7102-0005 497 Strike - Template No. 7102-0003

3. The 5400LN locks can be installed on 1-3/8 " (35mm) thick doors by using two (2)#14-5401-6644-200 spacers under the inside and outside roses.

4. Backset: 2-3/4" (70mm) standard 3-3/4" (95mm) to order 5" (127mm) to order

5. For wood door preparation refer to Template No. 7150-8007

Door manufacturer must provide supports within the door to keep the door from collapsing when lock is installed. Back of latch case must also be supported.

$\backslash frac\{1\}\{4\}$ $\backslash frac\{2-1/8\}\{(54)\}$ Cross Bore 7. All dimensions given in inches (mm). 4 Door Edge $\backslash frac\{1\}\{(25)\}$ Min. 8. Provide 3/4" (19) raceway for wire harness to electric hinge, 1-1/8 5/16 (2 Holes) location optional by door manufacture. (28.6)Mortise Depth (8) Thru Door for Latch Front 2-1/8_Dia. 1-3/8 (35) +.015 ±.005 2-1/4-.000 (70) (19)Wire -Raceway (See Note 8) 5/32 (4) or 5/32 (4) Dia. $\backslash frac\{1\}\{(25)\}$ Square Dia. Notch For 1-15/64 Wire Clearance (Thru) #8-32 Tapped Hole

Experience a safer and more open world

Copyright © 2005, 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

5480LN, 5481LN, 5490LN, and 5491LN Electric Locks

(Lever Handle Trim) H.M. Door Preparation Backset - 2-3/4"(70mm), 3-3/4"(95mm) and 5"(127mm)

Template Number: 7150-8006 Sheet: 1 of 1

– Taper 1/8 (3) per 2 (51)

Backset

See Note 4

5/8 Dia.

(16) (Ref.)

Date: 12/23

ASSA ABLOY

1-855-557-5078 www.assaabloy.com