Backset	1/2" Throw		5/8" Throw		3/4" Throw
	Latch No.	Link No.	Latch No.	Link No.	Latch No.	Link No.
2-3/4 (70)	494	_	480	-	480B	-
3-3/4 (95)	3494	_	3480	ı	3480B	-

DO NOT SCALE Taper <u>1/8</u> pe<u>r 2</u> (3) (5 Beveled Edge Universal or Backset See Note 5 Square Edge (See Table) 1-3/8 (35) to 2 (51) Std. Door Thickness, 2 (51) to 2-1/4 (57) Spec. 5/32 ± .005 Mortise Depth for Latch Front ₲ Door Edge (28.5)

Notes:

• When ANSI A115.2 (Fig. 1) Strike is specified, refer to No. 497 Strike, Template No. 7102-0003.
• When ANSI A115.2 (Fig. 2) Strike is specified, refer to No. 495 Strike, Template 7102-0005.
• 3. Dimensions marked with * have tolerances of +1/32, -0.
• 4. All dimensions given in inches (mm).
• 5. Provide pathway for wires to electric hinge, location optional by door manufacturer.

Experience a safer and more open world

Copyright © 1997, 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

5480 & 5490 Series Solenoid Controlled Cylindrical Locks (Knob Trim)

Tapped

Hole (2)

+.015

$1-5/8^\{-2\}$

(41.3)

1 Square

(25)

(57)

Lock &

H.M. Door Preparation (ANSI A115.2) (FIG. 1) 2-3/4" and Optional Backsets

Template Number: 7150-8004 Sheet: 1 of 1

2-15/32

Horizontal & vertical lock and latch case support by door mfg. For deeper backsets, additional reinforcement support for latchbolt link must be supplied by door mfg.

Date: 12/23

Alternate <u>1</u>Diameter (25)

ASSA ABLOY

3/8 Dia. Notch for

wire clearance

(outside only)

1-855-557-5078 www.assaabloy.com