ASSA ABLOY ACCENTRA 520F, 530F & 534F Series Trim (Discontinued) Installation Instructions_80-8470-0520-000

Installation Instructions

1. Check box contents, assemble pull (if used). See other side for components and instructions.

3/8 DIA. THRU

OUTSIDE FACE DOOR

4 HOLES)

• 2. After marking door inside face for Centerline" from inside door face. tions), carry "Vertical Reference Follow steps 2a. and 2b. below, device location (Device Instrucin Figure 2.
• Carry "Horizontal Reference Centerline" from inside to outside door face. က

REFERENCE E VERTICAL

(G Trim)

3-5/8 (92)

• Spot holes and prepare door for
• washers seating on door, as shown Mount trim to door. Fasten finger in Figure 1, plus one engaged to tight only with 2 screws and escutcheon bottom stud. . 9
• 7. Continue as shown in device instructions.

only the dimensions written on the template original template packed with the trim, use to locate the holes on the door (do not use machines may change the size of a drawing and make the template inaccurate to CAUTION: Office copiers and facsimile 4. Align trim template and tape to use as a door marker. If this is not the the template as a door marker). door outside face.

1/2 DIA. x (13) 1/8 DEEP (3) (534 ONLY)

(© Device & Trim)

E HORIZONTAL REFERENCE

to door lock edge).

Shown

Installation Template

80-8470-0520-000 (6-94)

520(F), 530(F) & 534(F) TRIM COMPONENTS

534(F) Trim Only: Assemble Pull as shown. Use Components marked (*).