SECTIONAL LEVER AND BALL KNOB TRIM

TEMPLATE: W53515, REV. 4 3-27-2013

INSIDE OF RIGHT HAND DOOR

DOOR EDGE

OUTSIDE OF RIGHT HAND DOOR

BACKSET AT DOOR EDGE CENTER LINE

MR SERIES MORTISE LOCKS ARE INSTALLED FOLLOWING THE DOOR AND FRAME REQUIREMENTS FOUND IN ANSI/BHMA A156.13-2002.

DOORS:

REINFORCEMENT IS REQUIRED PER ANSI A115.1-1991.

DOOR THICKNESS:

STANDARD DOOR THICKNESS IS 1-3/4". CONSULT FACTORY FOR OTHER DOOR SIZES.

LEAD LINING:

ADD $\backslash mbox\{\backslash \%\}"$ TO MORTISE WIDTH WHEN PREPARING DOOR FOR A LEAD LINED MR SERIES MORTISE LOCK BODY.

SILENCERS AND WEATHER STRIPPING:

PROVISIONS MUST BE MADE TO ALLOW PROPER DOOR CLOSURE WHEN USING DOOR SILENCERS, WEATHER STRIPPING OR SOUND PROOFING.

NOT TO SCALE

2754 CREEK HILL ROAD LEOLA, PA 17540

Ø₈ x 1/2 DEEP

J-TRIM ONLY

LEVER OR KNOB HEIGHT ABOVE FINISHED FLOOR

PHONE: (800) 441-9692 FAX: (717) 656-6892

MR205 MR211

JOB:
DATE:
COMMENTS: