510 & 600 Installation Instructions I361B-Rev06
#510 & #600 CAMTROL PIVOT MORTISE APPLICATION IN WOOD FLOOR CENTER LINE OF CAM BOX —— SAME AS CENTER LINE OF DOOR
TOP OF JAMB TOP DOOR 3/32'
BRACKET
1/8" BOTH SIDES OF DOOR Install cam box in head jamb and in the floor. The top and bottom pivot are to be 1-9/32" from the edge of the jamb per the template. For metal frame, reinforcement plate will be necessary for the top cam box. 2. Mortise top of the door and drill 3/4" ø3/4 TOP OF DOOR hole for top pivot pin. Mount the top door bracket on top of the door. 3. Mortise hinge edge of door to receive the bottom door bracket. Also cut 3/4" 3/16" MORTISE HINGE tall x 3/8" wide x 1-1/2 long slot into door
EGDE
for bottom pivot pin. OF DOOR Place plastic dust cover washer on top of the bottom cam box pivot pin. 5. Place bottom door bracket on top of the pivot pin. 6. Rotate top and bottom pivot pin 90 JAMB degrees to the open position to engage
FRAME
7. Lift door into place on the top pivot pin and screw bottom bracket to the back of the door using just the adjustment slot. 8. Now, force the door upward against the top pivot pin, while sliding the bottom bracket down, seating it firmly on the bottom pivot pin. Now that all vertical movement has been removed 3/16" MORTISE from the door assembly, place screws in HINGE EDGE OF DOOR ONLY the 3 remaining holes in the bottom bracket. -BOTTOM OF DOOR SLOT FOR PIVOT PIN BOTTOM BRACKET (5
BOTTOM OF DOOR 3/8" MIN. - 1" MAX. DOOR CLEARANCE ADJUSTMENT SLOT
PLASTIC
DUST COVER (4 WASHER DOOR FLOOR LINE
FLOOR
BOTTOM OF DOOR CAM BOX CAM BOX (MORTISE INTO FLOOR) DESCRIPTION: HAGER RESERVES THE RIGHT TO MAKE #510 & #600 CAMTROL PIVOT INSTALLATION INSTRUCTIONS DESIGN CHANGES WITHOUT NOTICE. HAGER COMPANIES 139 Victor St. St. Louis, M0 63104 1-800-325-9995 REVISION PART NO. NO. BY DATE I - 361BECO CT09003|SLJ|04.20.10 (REF. 17370004)