4700 Series SVR Latch Template t-ed00319-rev2

4700 SURFACE VERTICAL ROD EXIT DEVICE TOP LATCH BOTTOM LATCH TEMPLATE TEMPLATE TEMPLATE FOR EXIT DEVICE LATCHES (FOR PANIC AND FIRE RATED DEVICES ONLY) (REV: 02) DWG NO: T-ED00319 1 3/16" [30] 9/16" [15] Ю (3X) METAL: DRILL/TAP FOR #12-24 ىي MACHINE SCREWS WOOD: PRE-DRILL 1/8" HOLE 1 7/16" 1 7/16" -ALIGN STRIKE BEFORE [36.5] [36.5] INSTALLING THIS SCREW (2X) METAL: DRILL, TAP FOR 1/4"-20 MACHINE SCREWS 1 1/2" WOOD: PRE-DRILL 1/8" HOLE [38.1] SEX BOLTS: DRILL 5/16" CLEARANCE HOLES ON PUSH SIDE, 3/8" HOLES FOLD HERE BOTTOM ON PULL SIDE LATCH PLACE THIS SIDE ON TOP JAMB STOP FACE SEPERATE TOP AND BOTTOM TEMPLATES PLACE THIS SIDE ON STOP DOOR SURFACE (2X) METAL: DRILL, TAP FOR 1/4"-20 MACHINE SCREWS [28.6] OR WOOD: PRE-DRILL 1/8" HOLE SEX BOLTS: DRILL 5/16" CLEARANCE OR STOP FACE DOOR EDGE HOLES ON PUSH SIDE, 3/8" HOLES ON PULL SIDE LHR DOOR EDGE OR STOP FACE [47.6] [76.2] RHR DOOR EDGE 3 1/8" 1 7/8" [79.4] [47.6] 7 1 1/4" [31.8] FOLD HERE-PLACE THIS SIDE ON DOOR SURFACE PLACE THIS SIDE ON TOP OF FINISHED FLOOR OR TOP OF LATCH 13/16" PANIC THRESHOLD [20.6] 1 7/16" 1 7/16" [36.5] [36.5] CONCRETE: INSTALL ANCHOR BY DRILLING 1/2" X 7/8" DEEP & SECURE WITH A 1/4"-20 MACHINE SCREW WOOD: PRE-DRILL 1/8" HOLE • HOLE LOCATIONS HAGER

HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 Fax (800) 782-0149

PRIMARY DIMENSIONS SHOWN IN INCHES, DIMENSIONS IN [] ARE MILLIMETERS.

ىدى∖