429309 4200 Rim with Double Door Strike

4200R/RF & 4200V/VF RIM & SRV MODELS ON DOUBLE DOORS (PAIRS)

FOR 4200 SERIES EXIT DEVICES WITH OPTIONAL 429019 DOUBLE DOOR STRIKE

THIS SIDE UP FOR RHR DOOR

TEMPLATE: 429309, REV. 0 3-20-12

Fax: 717-656-6892

www.pdglocks.com

MACHINE SCREWS:

USE #7 OR 13/64" [5.1] DRILL AND 1/4-20 TAP

WOOD DOOR/FRAME SCREWS:

USE 5/32" [4.0] DRILL

SEX NUTS:

USE 3/8" [9.5] DRILL

NOTES:

• 1. VERIFY PRINTED TO SCALE.
• 2. SEE EXIT DEVICE TEMPLATE FOR BACKSET DIMENSIONS AND REFERANCE POINTS.
• 3. DIMENSIONS IN INCHES [MM]
• 4. CAUTION: SEX NUTS MAY BE REQUIRED FOR UNREINFORCED DOORS OR COMPOSITE FIRE DOORS. CONSULT DOOR MANUFACTURER'S RECOMMENDATIONS.
• 5. SEE TRIM TEMPLATE (IF APPLICABLE) OR DEVICE TEMPLATE FOR RELATED MACHINING DETAILS.
• 6. SEX NUTS CONFLICT WITH SECTIONAL TRIM (PULL SIDE OF DOOR). IN CASES WHERE THROUGH BOLTING IS REQUIRED, USE ESCUTCHEON TRIM.
• 7. RECOMMENDED DIMENSION FROM FINISHED FLOOR MAY VARY BY APPLICATION, CODES OR BUILDING SPECIFICATIONS.
• 8. USE COORDINATOR FOR SEQUENTIAL CLOSING.
• 9. LHR ACTIVE SHOWN. REVERSE IMAGE FOR RHR ACTIVE.
• 10. ALWAYS CHECK PDQ WEBSITE FOR MOST RECENT REVISION AT WWW.PDQLOCKS.COM

THIS SIDE UP FOR LHR DOOR DRILL FOR ATTACHMENT OF DEVICE CHASSIS TO DOOR (4X) IF APPLICABLE. DRILL FOR ATTACHMENT OF DEVICE REQUIRED FOR SECTIONAL TRIM, EXIT ONLY OR CYLINDER ONLY. SEE NOTES CHASSIS TO DOOR (4X) IF APPLICABLE. REQUIRED FOR SECTIONAL TRIM, EXIT "5" AND "7" 3/16" +/- 1/16" ONLY OR CYLINDER ONLY. SEE NOTES "5" AND "7" [4.8] +/- [1.6] 5/16" [7.9] 5/8" [15.9] 13/16" [20.5] 2" [50.7] 1-3/16" RIM DEVICE SVR DEVICE [30.2] EDGE INSIDE FACE OF 40-5/8" OF ACTIVE LEAF [1023.9] DOOR SEE NOTE - OR DOOR EDGE 7/8" [22.3] [76.2] [76.2] PDQ Manufacturing 2754 Creek Hill Rd. FINISHED FLOOR Leola, PA 17540 800-441-9692