HAGER TEST REPORT NO.: LS04004

EVALUATION OF

Hager Companies 3500 Series Grade 2 Lever Lockset

TEST PARAMETERS:

This report covers tests and/or evaluations performed using the following standard(s) as a guideline: ANSI/BHMA A156.2-1996 American National Standard for Bored and Preassembled Locks & Latches. Testing was conducted by Intertek Testing Services NA, Inc., at their Middleton, WI facility.

DESCRIPTION OF TEST SAMPLES:

Samples were identified as Model 3500 Grade 2 Lever Cylindrical Lockset. Samples were received in good condition on 3/08/2004.

TEST DATES: 3/11/2004 – 3/22/2004

RESULTS: COMPLIANT

The testing results of specific subsections are summarized below.

Subsection	Test Description	Test Results
9.1	Operational Tests	Compliant
9.2	Strength Tests	Compliant
9.3	Qualification Requirements	Compliant
9.4	Cycle Tests	Compliant
9.5	Performance after Cycle Tests	Compliant
9.6	Material Evaluation Tests	Compliant

This report summary was prepared as an account of work performed by a Third-Party Nationally Recognized Testing Laboratory. The information included in this report is certified extracts from the original test records, as contained in the permanent records of Hager Companies, Inc. Copies of the original third-party test reports are available upon request.

Report Date: 5/19/2004 Third Part Test Report: 3053604-001-1 Copyright © 2006 Hager Companies, Inc. Test Lab: Intertek Testing Services