319303 REV1 3100 Parallel Arm Template

3100/3101 DOOR CLOSER MODELS

PARALLEL ARM INSTALLATION - PUSH SIDE NON-HOLD OPEN AND HOLD OPEN APPLICATIONS

BOTTOM OF FRAME FACE 9-1/16" C 230.2 ्वा BOTTOM OF 3-1/4" STOP 82.6 3/4" 19.1 NON-HOLD OPEN BRACKET ILLUSTRATED D 7/16" -FACE OF STOP [11.1] 1/2" 12.7 3/8" 9.5 Ç 3/8" HINGE 9.5 2" OR PIVOT 50.8 2-3/4" NOTES: [69.9 ] 1. DRAWING IS NOT TO SCALE.

MACHINE SCREWS: USE #7 OR 13/64" [5.11] DRILL AND 1/4-20 TAP
WOOD DOOR / FRAME SCREWS: USE 5/32" [4] DRILL

REV. 1

TEMPLATE: 319303,

08-21-18

SEX NUTS:

USE 3/8" [9.53] DRILL (CLOSER TO DOOR)

Opening	Dim. A	Dim. B
To 100°	7-5/8" [193.6]	9-1/4" [235]
101° To 130°	6-1/8" [155.6]	7-3/4" [196.9]
131° TO 180°	4-1/8" [104.8]	5-3/4" [146]
Dim. C*
MIN. TO BOTTOM	5" [127.0]
MIN. TO BOTTOM	5-3/4" [146.0]
MIN. TO BOTTOM OF (OPTIONAL) STREAMLINE COVER WITH INSERT 5-7/8" [149.2]
Dim. D
MIN. STOP DEPT	H RECOMMENDED	1-1/4" [31.8]

MIN. RAIL DIMENSIONS BASED ON 5/8" [15.9] STOP HEIGHT AND 1/8" [3.2] TOP DOOR GAP.

• 2. RIGHT HAND DOOR SHOWN. FOR LEFT HAND DOOR REVERSE IMAGE.
• 3. DIMENSIONS BASED ON 4-1/2" X 4-1/2" BUTT HINGES.
• 4. DOOR SWING MAY BE ALTERED DUE TO OTHER LIMITING CONDITIONS.
• 5. CAUTION: SEX NUTS MAY BE REQUIRED FOR UNREINFORCED DOORS OR COMPOSITE FIRE DOORS. CONSULT MANUFACTURER'S RECOMMENDATIONS.
• 6. HOLD OPEN ARMS CAN NOT BE USED ON LABELED FIRE DOORS.
• 7. ALWAYS CHECK PDQ WEB SITE FOR THE MOST RECENT REVISION AT WWW.PDQLOCKS.COM.

Lancaster, PA 17603 833-273-7832 833-2 PDQTECH www.pdqlocks.com