UNLOCK THE POWER OF TRINE

2020 PRICEBOOK CATALOG

Prices effective March 1, 2020 Prices Subject to change without notice.

Table of Contents

The Specialized Solutions Series

- 4100DBDL pg.4-5

- 3275VRP-LC pg. 6

- 3250SOM-LC "Strike-O-Matic™" pg.7

Axion Premium Electric Strikes

- 4100 Series pg. 9-12 - 4200 Series pg. 14-18

- 4800 Series pg. 19-25 - EN Series pg. 25-32

- 3000 Series pg. 33-44

Light Commercial Electric Strikes

- 00 Series pg. 46-48 - 2000 Series pg. 49-50

- 01 Series pg. 50 - 1000 Series pg. 50

Where it all began.

Accessories

- 4850ITL / ANSI ITL pg. 52 (Best Installation Tools)

- Wireless Chimes pg. 53 - 017TDC-4/018-4 Series pg. 54

- Door Alarms/Switches pg. 55 - Chimes/Bells/Buzzers pg. 56

- Low V. Transformers pg. 57 - Pushbuttons pg. 58

Other

- Glossary pg. 59 - Strike Selector pg. 60-61

- Conditions of Sale pg. 62 - Cross Reference pg. 63

**NEW**

• 4100DB Nightlatch only function for mortise locks with deadbolts with 4 faceplates
• 4100CDBM Complete cylindrical, mortise, and deadbolt solution with 8 faceplates
• Black Powder Coat(BLK) Now available on many Axion electric strikes.

Discontinued

• 014 Series replace with 3000 series using the 234 Faceplate (see pages 34 and 40)
• LBM-1 and LBM-2

EFFECTIVE DATE || MARCH 1st, 2020

SPECIALIZED SOLUTIONS

ELECTRIC STRIKE SERIES

SOLUTIONS FOR UNIQUE INSTALLATIONS ONLY FROM TRINE

3275VRP

THE VERTICAL ROD LATCH SOLUTION

(actual size)

4100DBDL

THE DEADBOLT SPLIT LATCH DUAL MECHANISM SOLUTION

Provides emergency deadbolt override!

AND NIGHT LATCH FUNCTION FOR MORTISE LOCKS WITH DEADBOLTS

-3250SOM-LC

STRIKE-O-MATICTM

THE DOR-O-MATIC™ SOLUTION

THE SMALLEST ELECTRIC STRIKE IN THE WORLD... DOES IT AGAIN!

THE DEADBOLT SPLIT LATCH SOLUTION

4100DBDL

SPECIALIZED SOLUTIONS ELECTRIC STRIKE SERIES

The only electric strike with two locking mechanisms that function, separately.

Designed for deadbolt privacy , allowing for an emergency override .

Can be used for a night-latch function. (Leave the deadbolt latch un-powered).

Best

installation

opportunities

4 Faceplates included

DOCTOR SLEEPING ROOMS

THE DEADBO

Key Features:

• Two independently operated latch systems.
• Use with mortise locks with dead bolts up to 1" projection.
• Flexible: Always be prepared!
  • 4 faceplates included
  • 12 & 24DC, 12-24 AC, Low Current Draw
  • 1 Trim Skirt (matching finish)
• Strong: 2,000 lbs. holding force on each latch
• Durable: Exceeds 1,000,000 Life Cycles
• Works with the Schlage^® L Series & Yale^® 8700 Series without relocating mounting tabs.
• 1 11/16" backset.

Electric Characteristics *Per latch*
Voltage	Current/Amps	Ohms	Duty	Sound
12DC	0.240	50	Intm./Cont.	Silent
24DC	0.114	210	Intm./Cont.	Silent
12AC @ 60h	z 0.210	50	Intm.	Buzz
16AC @ 60h	z 0.280	50	Intm.	Buzz
24AC @ 60h	z 0.420	50	Intm.	Buzz

Need Latchbolt Monitoring?

SEE PAGE 23

for Active LB (Latchbolt monitoring) options and electronic information. Provided for both latches!

Price: 4100DBDL-32D (Satin Stainless Steel – BHMA630) $599 The following finishes are: • 4100DBDL-US4 (Satin Brass – BHMA606) $669 • 4100DBDL-US10 (Satin Bronze – BHMA612) 4100DBDL-US10B (Dark Bronze – BHMA613E) The following finishes are: $699 • 4100DBDL-32 (Polished Stainless Steel – BHMA629) • 4100DBDL-US3 (Bright Brass - BHMA605) To order Fail-safe see table to the right $\backslash rightarrow$ RS price same as above.

Standards:

• 3-hour fire rated UL10C. Fire Tests of Door Assemblies.
• BHMA Grade 1: ANSI/BHMA A156.5
• UBC 7-2, Uniform Building Code.
• CAN4 S104 , Standard Method for Fire Tests of Door Assemblies.
• NFPA 252 Issue: 1999/01/01 Standard Methods of Fire Tests of Door Assemblies.

Intertek

4100DBDL Handing & Failsafe Chart

Both latches Fail Secure (unlocks with power): 4100DBDL-LH-(finish) 4100DBDL-RH-(finish)

Both latches Fail Safe (locks with power): 4100DBDL-RS-LH-(finish) 4100DBDL-RS-RH-(finish)

Top latch (only) is Fail Safe (locks with power): 4100DBDL-RST-LH-(finish) 4100DBDL-RST-RH-(finish)

Bottom latch (only) is Fail Safe (locks with power): 4100DBDL-RSB-LH-(finish) 4100DBDL-RSB-RH-(finish)

Add "LB" for latchbolt monitoring

Both latches will have latchbolt monitoring:

EX: 4100DBDL-LB-LH-(finish) EX: 4100DBDL-LB-RSB-RH-(finish)

THE VERTICAL ROD SOLUTION

3275VRP-LC

The 3275VRP is the smallest electric strike solution for vertical rod latches.

Utilizes the heavy duty 3000F series mechanism.

For Use with:

• Sargent 97/68
• Arrow 3700/S1150/600
• Cal-Royal 9860V/F9860V
• Townsteel ED1200F
• Von Duprin 33/35
• Von Duprin 98/99 (Without the Deadlocking option)

Features:

• All stainless steel construction
• BHMA Grade 1
• LC100 included 12 & 24 AC/DC
• 1,500 lbs holding force
• 500,000+ life cycles
• Horizontal adjustment
• · Metal installation template included
• 1/16" spacer plate provided
• Included Trine's patented 4-pin anchoring system for stability.

	VOLTAGE	DUIL IN /UOLD AMDC	OUNTC
-	VOLTAGE	PULL IN/HOLD AMPS	OHMS
	12VDC	.743/.298	13
	12VAC	.715/.277	13
	24VDC	.397/.170	13
	24VAC	.378/.173	13
L	DUTY	/: Intermittent/Continuo	us

Finishes: 3275VRP-LC-ALUM	Price:
(Aluminum Powder Coat) 3275VRP-LC-DKBZ	$389
(Dark Bronze Powder Coat)	LC100 included

THE DOR-O-MATIC™ SOLUTION

3250SOM-LC (STRIKE-O-MATICTM)

The only electric strike for use with Dor-O-Matic®

• Utilizes the reliable 3000F series mechanism.
• 1/8" Horizontal adjustment included.
• LC100 included for surge and kickback protection

VOLTAGE	PULL IN/HOLD AMPS	OHMS
12VDC	.743/.298	13
12VAC	.715/.277	13
24VDC	.397/.170	13
24VAC	.378/.173	13
DUTY: Intermittent/Continuous		us

Features:

• Two faceplates provided in aluminum & dark bronze finish
• · All stainless steel mechanism
• BHMA Grade 1
• 1,500 lbs holding force
• 500,000+ life cycles
• · Horizontal adjustment
• Patented

Finishes: 3250SOM-LC-ALDB (Aluminum & Dark Bronze Powder Coated Faceplates)

Price: $419

LC100 included

THE COMPLETE LINE OF ONE BOX SOLUTIONS

323478F-LC

FOR CYLINDRICAL

THE SMALLEST HEAVY DUTY FIRE RATED ELECTRIC STRIKE IN THE WORLD

FOR CYLINDRICAL & MORTISE LOCKS

4100

4 FACEPLATES INCLUDED

3 HOUR FIRE RATED

4850

FOR RIM PANIC

HANDLES BOTH 1/2" & 3/4" LATCHES

NOW HANDLES UP TO A 1" LATCH

FOR RIM PANIC EXIT DEVICES

4800F

3 HOUR

AT NO ADDITIONAL COST

4200 FOR CYLINDRICAL & DEADLATCHES

EN400CMRP

FOR CYLINDRICAL, MORTISE, & RIM PANIC EXIT DEVICES

OUTDOOR RATED

3 HOUR FIRE RATED

323478LC

OR CYLINDRICAL LOCKSETS

THE SMALLEST ELECTRIC STRIKE IN THE WORLD

HE ONE BOX SOLUTION FOR CYLINDRICAL AND MORTISE LOCKS

THE ONE BOX SOLUTION FOR CYLINDRICAL AND MORTISE LOCKS

Key Features:

Use with cylindrical locksets, mortise locks without dead bolts and mortise exit devices.

• 1 3/8" shallow backset allows the 4100 to be used in 2" fire rated frames with 1/2" sheetrock ingress.
• Flexible: <u>Always be prepared!</u>
  • 4 faceplates included
  • 12 & 24DC, 12-24 AC, Low Current Draw
  • 1 Trim Skirt (matching finish) which covers competitor cutouts

• Strong: 3,000 lbs. of Holding Force (factory tested)

• Durable: Exceeds 1,000,000 Life Cycles

Works with the Schlage^® L Series & Yale^® 8700 Series without relocating mounting tabs.

Standards:

• 3-hour fire rated UL10C, Fire Tests of Door Assemblies.
• Listed for UL1034 Burglary Resistant Electric Locking Mechanism, Grade 1
• 294 (6th Edition) Listed
• BHMA Grade 1: ANSI/BHMA A156.5
• UBC 7-2, Uniform Building Code.
• CAN4 S104, Standard Method for Fire Tests of Door Assemblies.
• NFPA 252 Issue: 1999/01/01 Standard Methods of Fire Tests of Door Assemblies.
• USPT Patented #US20110241361
• ANSI/BHMA A156.31-2007

NOTE: WH fire listing is void when using fail safe action.

Everything included.

4100

Intertek

Need an Installation Tool See page 52

The best way to mark & cut the 4100 is the ANSI-ITL.

E ONE BOX SOLUTI

FOR CYLINDRICAL AND MORTISE LOCKS

Aesthetics Matter

The Premium stainless steel trim skirt cleans up the cut line.

Not worrying about a perfect cut on the face saves time and looks great. Since aesthetics matter, the premium trim skirt ALWAYS matches the finish on the faceplates and electric strike body.

Cutting Matters

1 - 3/8" Low profile backset provides ease of installation. Why cut for a deadbolt 100% of the time when they are only used 5% of the time.

Electric Characteristics

Voltage	Current/Amps	Ohms	Duty	Sound
12DC	0.240	50	Intm./Cont.	Silent
24DC	0.114	210	Intm./Cont.	Silent
12AC @ 60H	ız 0.210	50	Intm.	Buzz
16AC @ 60h	nz 0.280	50	Intm.	Buzz
24AC @ 60h	nz 0.420	50	Intm.	Buzz

No additional "pacs" required.

Power Matters

Low Current Draw .240 Amp at 12DC makes it very PoE Friendly

12 & 24DC :: 12 through 24AC All the low voltage flexibility you need.

Low current draw, under 300 mA for 12DC, solves a number of installation and network load issues.

-	$\backslash sim$
	₽.
	•

4100-32D (Satin Stainless Steel – BHMA630) $515

The following finishes are:

4100-US4 (Satin Brass – BHMA606) 4100-US10 (Satin Bronze – BHMA612)

• 4100-US10B (Dark Bronze BHMA613E)
• 4100-BLK (Black Powder Coat)

The following finishes are:

• 4100-32 (Polished Stainless Steel – BHMA629)

• 4100-US3 (Bright Brass – BHMA605)

For Fail-safe action (locks with power) add "RS" to the item number. EX: 4100RS-32D

RS price same as above.

$655

$599

Faceplates, strike body, mounting screws, latch, and trim skirt all match the finish.

THE NEW 4100DB & 4100CDBM

NIGHTLATCH FUNCTION DEADBOLT STRIKE

Key Features:

For use on mortise locks with deadbolts. Night latch functionality included.

• Includes 4 faceplates and nightlatch bracket.
• Use with mortise locks with dead bolts up to 1" projection.
• Flexible:
• 4 faceplates & trim skirt included
• Same standards & electrical characteristics as the 4100 (pg 10 & 11)

Price:
4100DB-32D (Satin Stainless Steel – BHMA630)	$530
The following finishes are: • 4100DB-US4 (Satin Brass – BHMA606) • 4100DB-US10 (Satin Bronze – BHMA612) • 4100DB-US10B (Dark Bronze – BHMA613E) • 4100DB-BLK (Black Powder Coat)	$599
The following finishes are: • 4100DB-32 (Polished Stainless Steel – BHMA629) • 4100DB-US3 (Bright Brass – BHMA605)	$655
For Fail-safe action (locks with power) add "RS" to the item number. EX: 4100DBRS-32D	RS price same as above.

4-7/8" 3-3/8"

Key Features: 4100

All the features of the 4100DB Includes 8 faceplates & nightlatch bracket.

The One Box Solution for Cylindrical, Mortise, and Deadbolts.

Always be prepared!

4 faceplates and bracket included

4100 Accessories

4100LB

The microswitches you've used for 30 years are a thing of the past. They are affected by moisture and fail sooner than you expect.

The Trine LB AND LBSM make use of a sealed magnetic reed switch that is moisture and environmentally resistant with a life cycle count in excess of 2 million cycles.

Stop replacing strikes due to low cost microswitches and start using a real Latchbolt Monitoring Solution.

4100LB/LBSM CHARACTERISTICS:

CONTACT FORM: C

CONTACT RATING: 10W SWITCHING VOLTAGE: 30V MAX AC/DC

SWITCHING CURRENT: 0.5 A

CONTACT RESISTANCE

STATIC: 150 MILLIOHM BREAKDOWN VOLTAGE: 200 VDC

OPERATING TEMP: -40° - 130° C RATE: 2,000,000+

CYCLES

U.S. Patent No. 10,563,428

Price:

4100LBSM

Latchbolt & Strike Monitoring

add $99 to the list price.

Important:

For Latchbolt monitoring on the 4100DB and 4100DBDL SEE PAGE 23

4100RX-250

• 1/4" stainless steel ramp extensions.
• Perfect for Raco^® frames or similar.
• Extension acts like a trim skirt to hide the cut line pocket.

41-4200-AK: Accessories Kit

• Standard and Torx^® screws
• 4100 & 4200 Latch shims
• Plug-in style wire connectors
• Sealed crimp connectors

Price: $30

Piezo Buzzers:

• BZ-12: Audible buzzer for 12DC power
  • - or -
• BZ-24: Audible buzzer for 24DC power

DC VOLTAGE ONLY

Price: $19

Finishes:	Price:
4100RX-250-32D (Satin Stainless Steel – BHMA630)	$49
US32 (Polished Stainless – BHMA629) US10B (Dark Bronze Powder Coat – BHMA613E)	$75 $75

Additional Faceplates: 9	CC9: 0" x 1 - 1/4"	CRD8: 7 - 15/16" x	CRD7: 6 - 7/8" x	CCRD: 4-7/8" x
Finish: 32D (Satin Stainless - BHMA630)	$40	1-7/16" $30	1-1/4" $30	1-1/4" $25
The following finishes are: 32 (Polished Stainless - BHMA629) US3 (Bright Brass - BHMA605)	$70	$60	$60	$55
The following finishes are: US4 (Satin Brass - BHMA606) US10 (Satin Bronze - BHMA612) US10B (Dark Bronze - BHMA613E)	$60	$50	$50	$45

THE BEST LOW CURRENT DRAW MOST FLEXIBLE FRAME MATCHING ELECTRIC STRIKE ON THE MARKET

THE ONE BOX SOLUTION

FOR CYLINDRICAL AND DEADLATCHES

THE FLEXIBLE STRIKE

The 4200

Key Features:

• Use with cylindrical locksets & dead latches in <u>aluminum</u>, metal, and wood frames. The 4200 <u>solves</u> problems auxiliary latch "pins" found on Adams Rite^® locks.
• Tall Cavity solves door sag problems. Tallest latch in its class.
• 1 1/16" shallow backset solves frame depth problems.
• · 4 faceplates included
• 12 & 24DC, 12-24 AC
• 3 3/8" Trim Skirt Included color matched trimskirts SOLVE bad cuts.
  • Removeable Fascia: Change colors in the field to match your frame.

Standards:

• ANSI/BHMA Grade 1 A156.31-2007
• ETL Listed for UL1034 Burglary Resistant Electric Locking Mechanism
• ETL Listed for UL294 (6th edition)

THE ONE BOX SOLUTION FOR CYLINDRICAL AND DEADLATCHES

FLEXIBLE FINISH

Henry Ford once said, "you can have any color you want, so long as it's black.

And our competition agrees

Need an Installation Tool See page 52

The best way to mark & cut the 4200 is the ANSI-ITL.

CHANGE THE FINISH IN THE FIELD WITH OUR CK SYSTEM

THE ONE BOX SOLUTION

FOR CYLINDRICAL AND DEADLATCHES

FLEXIBLE FACEPLATES

THE BEST SOLUTION FOR ALUMINUM FRAMES

4 FACEPLATES INCLUDED

6 FINISHES AVAILABLE

41-4200-AK: Accessories Kit

• Standard and Torx^® screws
• 4100 & 4200 Latch shims
• · Plug-in style wire connectors
• Sealed crimp connectors

Price: $30

FLEXIBLE POWER

Electric Characteristics Voltage Current/Amps Ohms Duty Sound 12DC 0.240 50 Intm./Cont. Silent 24DC 0.114 210 Intm./Cont. Silent 12AC @ 60hz 0.210 50 Intm. Buzz 16AC @ 60hz 0.280 50 Intm. Buzz 24AC @ 60hz 0.420 50 Intm. Buzz

Power Matters

Low Current Draw .240 Amp at 12DC makes it very PoE Friendly

12 & 24DC :: 12 through 24AC All the low voltage flexibility you need.

Price:

i iice.	Ψ203
4200-32D:	Stainless Steel Faceplates with Black
	Fascia – Use with the CK System ->
4200-ALUM:	Aluminum Faceplates & Fascia
4200-BLK:	Black Faceplates & Fascia
4200-DKBZ:	Dark Bronze Faceplates & Fascia
4200-GRN:	Green Faceplates & Fascia

Drice.

4200-WHT:

Add "RS" for Fail-safe model (ex: 4200RS-32D)

White Faceplates & Fascia

CK System

CK-ALUM: Aluminum Fascia/Trimskirt $29 CK-BLK: Black Fascia/Trimskirt

CK-DKBZ: Dark Bronze Fascia/Trimskirt

CK-GRN: Green Fascia/Trimskirt CK-WHT: White Fascia/Trimskirt

CK-PK: This pack includes 4 Fascia & Price: Trimskirt finish (except black) $80

$20a

THE ONE BOX SOLUTION FOR CYLINDRICAL AND DEADLATCHES

The 4200CC-10B-32D

BEST OPTION FOR THE 4200 SERIES - TRY ONE TODAY

Key Features:

• Two finish options in one box means you're ready for most frames.
• Tall Cavity solves door sag problems. Tallest latch in its class.
• All the features of the regular 4200 - for an even better price. (does not contain the long faceplates)

ALL ITEMS SHOWN ARE INCLUDED

4200CC-10B-32D (squared corners)

4200CCRD-10B-32D (rounded corners)

Price:

$189

The 4200CC7-10B-32D

Key Features:

• The two most common faceplate sizes for aluminum frames plus two finish options all in one box.
• 6-7/8" faceplate included for changing out an Adams Rite™ 1850 S swingbolt
• Solves door sag problems. Tallest latch in its class.

ALL ITEMS SHOWN ARE INCLUDED

www.trineonline.com

Price: $209 4200CC7-10B-32D - OR -4200CC7RD-10B-32D

THE ONE BOX SOLUTION FOR RIM PANIC EXIT DEVICES

TRIME

TRIME

4800F

FIRE RATED BUT PRICED WITHOUT IT

THE 1/2" SOLUTION

3 SPACERS INCLUDED 6 THICKNESSES CREATED

THE FIRE RATED 4" RIM PANIC SOLUTION

TRUST

The 4800F

FIRE RATING IS THE EVERDAY STANDARD

• For use with surface mounted rim exit devices with up to 1" throw. For use in new or replacement installations in wood or metal door frames and tight installs.
• Comes with Trine's Patented 4-Pin Anchoring System for strength and stability. (See page 24 for details)
• Cavity is completely open which means the 4800 allows for an incremental depth up to a 1" throw Competitor back plates do not allow for this versatility.
• Built-in electronics automatically allow 11 through 28 AC and DC Voltage input with surge and kickback protection.
• Contains a one piece locking mechanism with one solenoid. Less parts mean less problems.
• Fail-safe/Fail-secure field selectable. WH fire listing is void when using fail safe action.

Standards:

20

Class A, 3 Hour Single door / frame configuration

• UL10C, Fire Tests of Door Assemblies
• UBC 7-2, Uniform Building Code

- CAN4 S104, Standard Method for Fire Tests of Door Assemblies NFPA 252

Issue: 1999/01/01 Standard Methods of Fire Tests of Door Assemblies

- BHMA Grade 1 Electric Strike

Need an Installation Tool See page 52

The best way to

mark & drill the 4800F is the 4850-ITL.

Electronics allow for PLUG and PLAY capability

Electric Characteristics
Voltage	Pull In/Hold Amps	Duty	Sound
12DC	0.566/0.217	Intm./Cont.	Silent
24DC	0.253/0.099	Intm./Cont.	Silent
12AC	0.509/0.181	Intm./Cont.	Silent
16AC	0.405/0.149	Intm./Cont.	Silent
24AC	0.215/0.087	Intm./Cont.	Silent

Price: See Page 24 fo	or options.
4800F-32D (Satin Stainless Steel – BHMA630)	$515
4800F-DKBZ (Dark Bronze Powder Coated – BHMA613E) 4800F-BLK (Black Powder Coated)	$540
4800F-US4 (Satin Brass – BHMA606) 4800F-US10 (Satin Bronze – BHMA612)	$590
4800F-32 (Polished Stainless Steel – BHMA629) 4800F-US3 (Bright Brass – BHMA605)	$610

THE ONE BOX SOLUTION FOR RIM PANIC EXIT DEVICES

• The 4850
• For use with surface mounted rim exit devices with up to a 1" throw.
• Cavity is completely open which means the 4850 allows for an incremental depth up to a 1" throw - Competitor back plates do not allow for this versatility.
• Built-in electronics automatically allow 11 through 28 DC voltage input – with surge and kickback protection
• Comes with Trine's Patented 6-Pin Anchoring System for strength and stability. (See page 24 for details)
• Contains a one piece locking mechanism with one solenoid – less parts mean less problems.
• Fail-safe/Fail-secure field selectable.
• BHMA Grade 1 Electric Strike

Electric Characteristics
	Pull In/Holding
Voltage	Current/Amps	Duty	Sound
12DC	0.500/0.178	Intm./Cont.	Silent
16DC	0.385/0.131	Intm./Cont.	Silent
24DC	0.255/0.084	Intm./Cont.	Silent

Price: See Page 24 to	or options.
4850-32D (Satin Stainless Steel – BHMA630)	$515
4850-DKBZ (Dark Bronze Powder Coated – BHMA613E) 4850-BLK (Black Powder Coated)	$550
4850-US4 (Satin Brass – BHMA606) 4850-US10 (Satin Bronze – BHMA612)	$595
4850-32 (Polished Stainless Steel – BHMA629) 4850-US3 (Bright Brass – BHMA605)	$615

Need an Installation Tool See page 52

The best way to mark & drill the 4850 is the 4850-ITL.

3 Spacers included, 6 Thicknesses created, 1 Box Solution Provided.

HE LOW CURRENT DRAW SOLUTION FOR RIM PANIC EXIT DEVICES

The 4850PoE & LCD

Low Current Draw means a smaller, or no additional, power supply required for most installations.

Electric Characteristics
Item	Voltage	Amps	Watts	Duty	Sound
4850PoE	12DC	0.260	3.12	Intm./Cont.	Silent
4850LCD	24DC	0.135	3.24	Intm./Cont.	Silent
Other surface	e mounted
strikes start at:
12DC		0.450	5.4	0
	24DC	0.250	6.0	0

Price: See Page 24	for options.
4850PoE-32D (Satin Stainless Steel – BHMA630)	$515
4850PoE-DKBZ (Dark Bronze Powder Coated – BHMA613E) 4850PoE-BLK (Black Powder Coated)	$550
4850PoE-US4 (Satin Brass – BHMA606) 4850PoE-US10 (Satin Bronze – BHMA612)	$595
4850PoE-32 (Polished Stainless Steel – BHMA629) 4850PoE-US3 (Bright Brass – BHMA605)	$615
***Replace "PoE" with the letters "LCD" when ordering the 24D	C model***

4801 - "Bolt" Strike

• For use with the Yale Squarebolt® or Corbin Russwin Securebolt™ in new or replacement installations with wood or metal door frames.
• Use with surface mounted rim device with up to 1" throw.
• Cavity Opening -Height: 117/32" Width: 15/32"
• 6-Pin Anchor system provided to handle the toughest installations.
• Electronics and BHMA rating same as the 4800F - see page 20.

*Must Install 2 middle pins on the

4801/4801LB

Active Latchbolt Monitoring (LB Option)

• Single pole, double throw, form "C" Relay, rated at 1-amp at 12-24 AC-DC
• N/O and N/C relay contacts
• Module power source 12-24 DC
• Current consumption is: 12v: standby 12.7ma activate 22.8ma 24v: standby 19.4ma activate 34.4ma
• All other features are the same as the base model.

LB option on the 4100DB (pg 12) & 4100DBDL (pg 4)

Utilizes TWO IR optical active sensor for the deadbolt and the the latchbolt, with mortise devices. All other electrical information is the same as above.

Price:

Add "LB" to the 4100DBDL or 4100DB

Example: - 4100DB LB -32D

Dual Relav add $150.00 to the price of the base

unit.

Add "LB" to any 4800 series electric strike

Example: - 4800 FLB -

add $99.00 to the price of the base unit.

Price:

4801-32D (Satin Stainless Steel - BHMA630) $549

4801-DKBZ (Dark Bronze Powder Coated – BHMA613E) $554 4801-BLK (Black Powder Coated)

4801-US4 (Satin Brass - BHMA606) $618 4801-US10 (Satin Bronze – BHMA612)

4801-32 (Polished Stainless Steel – BHMA629) $629 4801-US3 (Bright Brass – BHMA605)

PATENTED ANCHORING SYSTEM

• Included in every 4800 series strike.
• Prevents strike from shifting on the frame for the most secure installation.
• Two center pins suggested for installs in high traffic locations.

Need an Installation Tool

See page 52

The best way to mark & drill the 4801 is the 4850-ITL.

4800 Series Accessories

MWH-5

	I IAN WIDE HADNESS EAD	4800 SERIES ELECTRIC STRIKES
REIVIUVABLE IVIULI	LIUN WIRE HARNESS FUR	4000 SERIES ELECTRIC STRIKES

Contains:

• (1) 5' Wire for mullion with male/female connectors.
• (1) Male connector & (1) Female connector.
• (1) Mullion cap, & (1) Wire adhesive.

• (4) Wire caps
• (1) Wire tie

4850-AK: ACCESSORIES KIT

Contains:

• (1) Fail safe plunger with spring & (1) Fail safe cam.
• (6) Anchoring pins.
• (1) Wire connector
• (2) Wire caps
• (2) 1/4-20 x 1" UH Cap socket mounting screws

4800-AK: ACCESSORIES KIT

Contains:

• (1) Fail safe plunger with spring
• (4) Anchoring pins.
• (1) Wire connector • (2) Wire caps
• (2) 1/4-20 x 1" UH Cap socket mounting screws

4800-SS: TWO 1/16" SPACER PLATES IN 32D 4800-SS-DKBZ: TWO 1/16" SPACER IN DARK BRONZE 613E Fits all 4800 Series Electric Strikes

4850-SS: 1/4" SPACER PLATE IN 32D 4850-SS-DKBZ: 1/4" SPACER IN DARK BRONZE 613E

Fits all 4800 Series Electric Strikes

www.trineonline.com

$38

$30

Price:

$55

$30

$45

$49

THE ONE BOX SOLUTION FOR ALL GATE AND OUTDOOR INSTALLATIONS

3 HOUR FIRE RATED (except 400RP, 800, 850) BURGLARY RATED OUTDOOR RATED 294 RATED

EN400CMRP

THE GATE "KIT" FOR ELECTRIC STRIKES

THE ONLY ELECTRIC STRIKE THAT CAN CHANGE LATCHES TO WORK WITH CYLINDRICAL, MORTISE, AND RIM PANICS

The Outdoor Electric Strike Solutions

EN Series

Contains ONLY 8 total parts. Only 1 moving part in the locking mechanism. All stainless steel construction.

• + Superior Strength 2,000+ lbs 🖫 tested.
  • Superior Life 1,000,000+ cycles.
• → Superior Application (4) Outdoor rating allows the strike to be used where the competition can not.

• Continuous Duty runs very cool (DC only)
• Durability of 1,000,000+ life cycles
• A holding force of 2,000+ lbs (4) Tested!
• Fail-secure/Fail-safe is field reversible on DC units (except on 430 & 435 models)*
• Left and Right handing is field reversible (except the offset 430 & 435 models)*
• Low Current Draw (DC Models*) Voltage & Amp draw is the same across all EN Models

Standards

• U Listed 10C Fire-rated
  • Class A, 3-hour, single swing door (except on 400RP, 800 & 850 models)
• UL 1034 burglary-resistant listed and suitable for outdoor use
• UL 294 (6th Edition) listed
• BHMA 156.31 2001, Grade 1
• NYC MEA 79-01-E

HOW TO ORDER

<u>Please</u> provide the following information to ensure you receive the CORRECT electric strike.

Model # - Voltage - Finish - Handing example: 400 12DC 32D RH

*Fail Safe Request: Please add "RS" to item#

Add $15 to list price of base model.

Electric	Charact
Voltage	Amps	Ohms	Duty	Sound
12AC	0.70	4.5	Intm.	Buzz
24AC	0.37	18.0	Intm.	Buzz
12DC	0.28	43.0	Intm./Cont.	Silent
24DC	0.15	164.0	Intm./Cont.	Silent

Wire Lead Color Codes

Voltage Wire Colors 12AC - Blue & Orange/White || 24AC - Blue & Black/White 12DC - 2 - Orange/White || 24DC - 2 - Black/White

Need an Installation Tool

See page 52

The best way to mark & cut for the EN400 is the ANSI-ITL

THE OUTDOOR SOLUTION

FOR CYLINDRICAL, MORTISE, & RIM PANIC EXIT DEVICES

EN400CMRP

THE ONLY ELECTRIC STRIKE SOLUTION ON THE MARKET THAT CAN HANDLE

CYLINDRICAL, MORTISE, DEADLATCHES, AND RIM PANICS

The Flexible 400CMRP Includes:

• A completed strike in the box (see bottom of page for details).
• An additional strike latch to handle mortise, cylindrical, and rim panic strikes.
• The EN400-Gatebox mount the strike anywhere.
• The EN-24DC-CA change voltage in the field.
• Fail safe/Fail secure field reversible.
• Always Low Current Draw

& E LIE

EN400-Gatebox

Install the EN400CMRP anywhere on the frame or post.

$545

Price:

400CMRP-32D (Satin Stainless Steel – BHMA630) - unit comes as a 400-12DC-32D-RH; RP (rim panic) latch and 24DC coil are in the box.

400RPCM-32D (Satin Stainless Steel – BHMA630)

- unit comes as a 400RP-24DC-32D-RH; CM (cylindrical/mortise) latch and 12DC coil are in the box.

Kits cannot be ordered with with latchbolt (LB) monitoring. Please order from page 31 with a gatebox to match.

*Steel gatebox is unfinished*

Aluminum gatebox available (see pg 32)

The Outdoor Electric Strike Solutions

EN Series

EN400

• Use with cylindrical and mortise Locks.
• · Perfect for exterior doors and gates.
• Latch Shim Kit provided for horizontal cavity adjustment.

$485

Field reversible handing – remember to pick a specific hand when ordering to save time.

when ordering to save time. Price: Refer to pg 26 for "How to Order" 400-32D (Satin Stainless Steel - BHMA630) $430 400-BLK (Black Powder Coat)

The following finishes are:

• 400-US3 (Bright Brass – BHMA605)

• 400-US4 (Satin Brass – BHMA606)

• 400-US10 (Satin Bronze – BHMA612)

• 400-US10B(Dark Bronze Powder Coat – BHMA613E)

• 400-32 (Polished Stainless – BHMA629)

EN400-Gatebox $50 (Steel Gatebox, *unfinished*)

EN400-Gatebox-AL $84 (Aluminum Gatebox)

EN400RP

(Not UL 10C listed)

• Use with rim panic devices
• Perfect for exterior doors and gates.
• Field reversible handing remember to pick a specific hand when ordering to save time.
• The Outdoor Rim Panic Solution

Price: Refer to pg 26 for "How to Order" 400RP-32D (Satin Stainless Steel - BHMA630) $430 400RP-BLK (Black Powder Coat) The following finishes are: $485 • 400RP-US3 (Bright Brass - BHMA605) • 400RP-US4 (Satin Brass - BHMA606) • 400RP-US10 (Satin Bronze - BHMA612) • 400RP-US10B (Dark Bronze Powder Coat - BHMA613E) • 400RP-32 (Polished Stainless - BHMA629)

EN400-Gatebox $50 EN400-Gatebox-AL $84

(Aluminum Gatebox)

AXION

The Outdoor Electric Strike Solutions EN Series

(Q)

TRINE

1 3/4"

EN430 - CAVITY CENTERLINE LH shown OFFSET 1"

TRINE

For new or replacement installations in metal jambs. Use with mortise lock latchbolts with up to 7/8" throw without relocating centerline. Based on 1/8" door gap.

Latch Shim Kit provided for horizontal cavity adjustment.

Designed to work with Schlage L Series, Sargent 7700, 8100, & Yale 8700

Refer to pg 26 for "How to Order"

Price:

CENTERLINE

OFFSET OF LATCH CAVITY

OFFSET

1" LATCH WIDTH

$460

$510

430-32D

(Satin Stainless Steel - BHMA630)

The following finishes are:

• 430-US3 (Bright Brass – BHMA605)
• 430-US4 (Satin Brass – BHMA606)
• 430-US10
• (Satin Bronze BHMA612)
• 430-US10B
• (Dark Bronze Powder Coat BHMA613E) 430-32
  • (Polished Stainless BHMA629)

The EN430 is handed, please specify LH or RH

LH shown

TRINE

EN435 - CAVITY CENTERLINE OFFSET 3/4"

For new or replacement installations in metal jambs. Use with mortise lock latchbolts with up to 7/8" throw without relocating centerline. Based on 1/8" door gap.

Latch Shim Kit provided for horizontal cavity adjustment.

Designed to work with Arrow, Falcon, Sargent 7800, 8200, 9200. Yale 8800

Factory tested by Best^® to work with the 45H Series.

Refer to pg 26 for "How to Order"

Price:

435-32D $460

(Satin Stainless Steel - BHMA630)

The following finishes are:

• 435-US3
• 435-US4
• (Satin Brass BHMA606) • 435-US10
• (Satin Bronze BHMA612)
• 435-US10B
• (Dark Bronze Powder Coat BHMA613E)
• 435-32

(Polished Stainless – BHMA629)

The EN435 is handed, please specify LH or RH

EN800 - GREAT FOR OUTDOOR GATES

For new or replacement installations in wood or metal single door jambs. Use with surface mounted rim exit devices with up to 1" throw. 3/4" thick face plate.

(Not UL 10C Listed)

Works with Rim Panic Exit Devices

Refer to pg 26 for "How to Order"

Price:

800-32D $490 (Satin Stainless Steel – BHMA630)

The following finishes are:

• 800-US3 $535 (Bright Brass – BHMA605)

• 800-US4 (Satin Brass – BHMA606)

• 800-US10

(Satin Proper PHMA612

• 800-US10B

(Dark Bronze Powder Coat – BHMA613E)

800-32 (Polished Stainless – BHMA629)

The Outdoor Electric Strike Solutions

EN850 - GREAT FOR OUTDOOR GATES

For new or replacement installations in wood or metal single door jambs. Use with surface mounted rim exit devices with up to 1" throw. 1/2" thick face plate.

(Not UL 10C Listed)

Works with Rim Panic Exit Devices.

Refer to pg 26 for "How to Order"

Price:

850-32D

(Satin Stainless Steel - BHMA630)

$505

$565

The following finishes are:

• 850-US3
• 850-US4 - BHMA606)
• 850-US10 BHMA612)
• 850-US10B
• nze Powder Coat BHMA613E)
• 850-32

(Polished Stainless - BHMA629)

EN950 -- FITS FOLGER ADAM® 310-2 CUTOUT

For new or replacement installations in metal or wood jambs. Use with mortise exit devices, mortise locks without dead bolts and cylindrical locksets with up to 7/8" throw. Based on 1/8" door gap.

Latch Shim Kit provided for horizontal cavity adjustment.

Refer to pg 26 for "How to Order"

Price:

950-32D

$495

(Satin Stainless Steel - BHMA630)

The following finishes are:

• $555 • 950-US3
• 950-US4
• BHMA606)
• 950-US10
• BHMA612)
• 950-US10B (Dark Bronze Powder Coat – BHMA613E)

(Polished Stainless - BHMA629)

EN960 - FITS FOLGER ADAM® 310-2 3/4" CUTOUT

For new or replacement installations in metal or wood jambs. Use with mortise exit devices, mortise locks without dead bolts and cylindrical locksets with up to 7/8" throw. Based on 1/8" door gap.

Latch Shim Kit provided for horizontal cavity adjustment.

Refer to pg 26 for "How to Order"

Price:

$550

(Satin Stainless Steel - BHMA630)

The following finishes are:

960-us3

$599

• BHMA605)
• 960-US4
• BHMA606)
• 960-US10
• BHMA612)
• 960-US10B
• onze Powder Coat BHMA613E) • 960-32
• (Polished Stainless BHMA629)

AXION PREMIUM ELECTRIC STRIKES

EN Latchbolt Monitoring

U.S. Patent No. 10,563,428

USE WITH A GATEBOX FOR ADDED FLEXIBILITY

The NEW LBSM for the 400, 950, 960

• Latchbolt monitoring utilizes a sealed magnetic reed switch and monitors if the lockset latch is engaged with the strike.
• Strike mechanism monitoring detects whether the strike is in the locked or unlocked position

LBM CHARACTERISTICS:

CONTACT FORM: C CONTACT RATING: 10W

SWITCHING VOLTAGE: 30V max AC/DC SWITCHING CURRENT: 0.5 amps

CONTACT RESISTANCE

STATIC:

BREAKDOWN VOLTAGE: 200 VDC OPERATING TEMP: -40° - 130° C RATE: 2,000,000+ cycles

Price:

Add "LBSM" to model 400, 950, or 960

150 milliohms (m $\backslash Omega$ )

Example: 400 LBSM -12 DC -32 D

add $99

to the price of the base unit.

*Cannot add to 400CMRP/RPCM kits*

TOUGH-AS-NAILS-GO-ANYWHERE-EN-SERIES

has found a latchbolt monitor that can follow it <u>outdoors</u> and into the elements.

EN-LB - 430/435 LATCHBOLT MONITORING

• Remote central station notification
• Local alarm monitoring relay
• Triggering video surveillance/recording systems
• Active relay for trap door systems

IR optical sensor – Adjustable sensitivity with simple screw adjustment – Single pole, double throw, Form "C" relay, rated at 1-amp at 12-24 AC/DC – N/O and N/C relay contacts – Module power source rating of 12-24VDC

Current consumption is:

0.034 amps at 12VDC & 0.045 amps at 24VDC

FOR 430 & 435 ONLY

Price:

Add "LB" to a 430 or 435 electric strike

Examples:

430LB-12DC-32D

add $ 99

to the price of the base unit.

EN Series Accessories

eries	MODEL	DESCRIPTION	Price:
	LC-100	External unit that operates on 11 through 29 AC/DC input and provides inductive kickback and surge protection. When used with the EN Series, 12DC must be selected and the LC100 must be located within 10' of the electric strike.	$62
	EN-CA-12DC EN-CA-24DC EN-CA-12AC EN-CA-24AC	Coil Assembly (Orange/White Wire Leads) Coil Assembly (Black/White Wire Leads) Coil Assembly (Blue/Orange & White Wire Leads) Coil Assembly (Blue/Black & White Wire Leads)	$49 $49 $49 $49
	EN-SLR-RS TRS EN-TS EN-LSK	(1) Fail Safe Slider for 430/435 Units (2) Tamper-Resistant Torx® #12-24 Screws Trim Skirt (Not for use with 950 & 960) EN Latch Shim Kit for horizontal cavity adjustment.	$35 $10 $29 $18
	ESK-1	EN Service Kit: (1) Latch spring (2) PFH 12-24x1" mounting screws & (2) PFH 6-32 x 1/8" cover screws (2) Wire nut caps & (1) assembly pin and instruction sheet	$18
	BZ-12 BZ-24	Buzzer for 12 DC operation Buzzer for 24 DC operation	$19 $19
	EN400-Gatebox	The weldable gate box solution for use with the EN400 & EN400RP Outdoor rated electric strikes. (Steel gatebox is *Not Finished*).	$50
EN400-Gatebox-AL		The aluminum gate box solutution for use with the EN400 & 400RP.
		23/8" 13/4"

EN400-Gatebox & EN400-Gatebox-AL Dimensions

THE ONE BOX SOLUTION THE SMALLEST ELECTRIC STRIKE IN THE WORLD

SMALL STRIKES - THE WAY YOU NEED THEM.

MAKING SMALL STRIKE INSTALLATIONS EVEN EASIER

CHECK OUT THE ANSI-ITL ON PAGE 52

Only 1" Total Backset 3000 Series

Key Features

• BHMA GRADE 1
• Accepts up to 5/8" latch throw
• 500,000 + life cycles
• 1,500 + lbs. holding force (1,200 lbs. for 334)
• Dynamic Force 70 ft/lb.
• Fail-safe Option "RS" (locks with power)

Standards

• BHMA A156.31
• BHMA Grade 1 All models (except 334)
• BHMA Grade 2 334

Note: 3000 series not recommended for use on uncovered exterior doors.

LC Must be used within 15' of the mechanism ** LC100

An external line conditioner regulating input voltages, 11-29 AC/DC, and conditions the output for the activation period. Reduces holding voltage for continuous operation and reduced heat. Provides current/voltage surge & kickback protection.

Price: $62

Options

Piezo Buzzer for "Standard Models"

• BZ-12: Audible buzzer for 12DC power
• BZ-24: Audible buzzer for 24DC power Piezo Buzzer for "LC Models"
• BZ-6: Audible buzzer for 6DC power

Price:

$19

3000-AK: Accessories Kit for the 3000 series: Includes: (2) 1/8" strike shims. (2) 1/16" faceplate shims

(2) 1/8" Horizontal adjustment tabs. (2) Long faceplate screws. (2) Short faceplate screws.

Price: $27

MODEL 3012 3024	ı	VOLTAGE 12VDC 24VDC	CURRENT/AMPS .480 .240	I	OHMS 25 100	DUTY Intermittent Intermittent	ī	SOUND Silent Silent	I	WIRE COLOR Blue White
MODEL 323478LC/ 323478FLC/ 30LC/ 30RS		VOLTAGE 12VDC 12VAC 24VDC 24VAC	PULL IN/HOLD AMPS .743/.298 .715/.277 .397/.170 .378/.173		0HMS 13 13 13 13	DUTY Intermittent/Continuous Intermittent/Continuous Intermittent/Continuous Intermittent/Continuous		SOUND Silent Silent Silent Silent		WIRE COLOR Red Red Red Red

^** Must use LC100. LC Must be installed within 15' of the mechanism **

30LC & 30RS Mechanism

The LC100 is included with 30LC & 30RS ONLY and must be placed within 15' feet of mechanism!

Item Voltage Function Dutv 11-29AC/DC Fail Secure Continuous 30LC 30RS 11-29AC/DC Fail Safe Continuous

$189 $189

Price:

** Must use included LC100 **

Now pick a faceplate - starting on page 38

Fail Secure Intermittent

<u>-or-</u>

$151

Make it easy And get a kit - next page

3024

TELECTRIC STRIKE IN THE WORLD

$245

FOR CYLINDRICAL LOCKS

323478LC KIT

323478LC Includes: @@

• (1) 234-26D 2 3/4" Faceplate
• (1) 234X-375-26D 2 3/4" Faceplate with extended ramp
• (1) 478-32D 4 7/8" Faceplate
• (1) 30LC 11-29 AC & DC Mechanism

234-26D

For the smallest electric strike cutout!

Patented horizontal adjustment feature - guaranteed not to move!

Price:

30LC

234X-26D

Designed for Timely®/Redi® Frames. Great for Wood!

Need an Installation Tool

See page 52

The best way to mark & cut for the 323478 is the ANSI-ITL

FOR DEADLATCHES AND ALUMINUM FRAMES

8458LC KIT

3258458LC Includes:

• (1) 258 23/4 Faceplate
• (1) 458LH 4 5/8" Left Handed Faceplate
• (1) 458RH 4 5/8" Right Handed Faceplate
• (1) 30LC 11-29 AC & DC Mechanism

Finishes:

3258458LC-ALUM (Aluminum Powder Coat)

Price: $272

3258458LC-DKBZ

(Dark Bronze Powder Coat - BHMA613E)

80% LESS FRAME CUTTING.

Smallest aluminum solution available - Great for glass store fronts

Fills frame preparation for many Adams Rite® Locks without relocating tabs.

30LC

See page 44 for cut out details.

HE FIRE PATED SOLUTION ELECTRIC STRIKE IN THE WORLD

323478F-LC

NEW SOLUTIONS

• Heavy Duty Stainless Steel Construction
• 1" Total Backset
• 1/8" Horizontal Adjustment
• 12-24 AC & DC surge & kickback protection
• Includes LC100 & Trim skirt (CCFP)

Standards:

• 3-hour fire rated UL10C, Fire Tests of Door Assemblies.
• ANSI/BHMA A156.31-2007
• BHMA Grade 1 Heavy Duty

NOTE: WH fire listing is void when using fail safe action.

VOLTAGE	PULL IN/HOLD AMPS	OHMS	DUTY
12VDC	.743/.298	13	Intermittent/Continuous
12VAC	.715/.277	13	Intermittent/Continuous
24VDC	.397/.170	13	Intermittent/Continuous
24VAC	.378/.173	13	Intermittent/Continuous

Price:
323478F-LC-32D	$409
(Satin Stainless Steel – BHMA630) 323478F-RS-32D	$409
(Satin Stainless Steel – BHMA630) 323478F-LC-DKBZ	$428
(Dark Bronze Powder Coat - BHMA613E)
323478F-RS-DKBZ (Dark Bronze Powder Coat – BHMA613E)	$428

Need an Installation Tool See page 52

The best way to mark & cut the 323478F is the ANSI-ITL.

FORGING WITH ELECTRIC STRIKES

323478FX-LC

• As above.
• Contains the 478X-375 Faceplate for Timely®/Redi®/Raco Frames (instead of the 478 Faceplate.)

Refer to pg 34 for electrical characteristics.

3478F

• Heavy duty stainless steel construction
• 1" total backset
• 1/8" horizontal adjustment
• Two 1/16" shims for depth adjustment
• Trim skirt (CCFP) included
• 3478F-LC includes LC100

	VOLTAGE	AMPS	OHMS	DUTY
3478F-12DC	12VDC	.480	25	Intermittent
3478F-24DC	24VDC	.240	100	Intermittent

	VOLTAGE	PULL IN/HOLD AMPS	OHMS	DUTY
	12VDC	.743/.298	13	Intermittent/Continuous
3478F-LC	12VAC	.715/.277	13	Intermittent/Continuous
3478F-RS	24VDC	.397/.170	13	Intermittent/Continuous
	24VAC	.378/.173	13	Intermittent/Continuous

Standards:

• 3-hour fire rated -- UL10C, Fire Tests of Door Assemblies.
• ANSI/BHMA A156.31-2007
• BHMA Grade 1

NOTE: WH fire listing is void when using fail safe action.

Need an Installation Tool

See page 52

The best way to mark & cut the 3478F is the ANSI-ITL.

Price:
3478F-LC-32D (Satin Stainless Steel BHMA630)
3478F-RS-32D (Satin Stainless Steel BHMA630)	$359
3478F-LC-DKBZ
(Dark Bronze Powder Coat BHMA613E) 3478F-RS-DKBZ	$378
(Dark Bronze Powder Coat BHMA613E)
3478F-12DC-32D
(Satin Stainless Steel BHMA630) 3478F-24DC-32D	$335
(Satin Stainless Steel BHMA630)
3478F-12DC-DKBZ
(Dark Bronze Powder Coat BHMA613E) 3478F-24DC-DKBZ	$354
(Dark Bronze Powder Coat BHMA613E)

FIRE RATING IS THE EVERDAY STANDARD

Compare the 3478F, the 323478F, the 4800F for rim panics, or even the outdoor rated EN400 against the competition.

We offer a stronger, more durable, fire rated product... for less.

478

Adjustable 4-7/8" ANSI standard faceplate

For new or replacement installation in wood. metal or aluminum frames. Use with cylindrical locksets having up to 5/8" throw, based on 1/8" door gap.

478-CCFP

INCLUDED WITH THE 478 FACEPLATE! Competitor Cutout Filler Plate

Stainless plate designed to fill in the hole left by competitor models.

No ugly black ramp!

Price:
478-32D (Satin Stainless Steel – BHMA630)	$35
478-32 (Polished Stainless Steel – BHMA629)	$59
478-US10B (Dark Bronze Powder Coat - BHMA613E	$51
478-US3 (Bright Brass – BHMA605)	$66
478-US4 (Satin Brass – BHMA606)	$54
RD (Radiused Corners)	add $5
478RO and 478LO (drop plates) are same cost as above.
Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS

Need an Installation Tool

See page 52

The best way to mark & cut for the 478 is the ANSI-ITL

THE 3000 SERIES

478X-375

Adjustable Extended Lip Faceplate

Frame features an extended ramp to accommodate additional face of Timely ^®/ Redi ^®/ Raco ^® frames . Use with cylindrical locksets and deadlatches having up to 5/8" throw, based on 1/8" door gap.

Provides a finished look for wood frames with trim.

Made for Timely® / Redi® / Raco® Frames

GOODBYE UNATTRACTIVE BLACK RAMPS!

• Extended ramp (.375") accommodates snap-on additional frame face of Timely® & Redi® Frames.
• Eliminates traditional 4 7/8" ANSI strike cutting and black ramp extensions.
• 1/8" Horizontal Adjustments help prevent door pre-load.

See page 45 for wood and metal frame preps.

Price:

478X-375-32D $50 (Satin Stainless Steel - BHMA630) 478X-375-US10B $66 (Dark Bronze Powder Coat - BHMA613E) 478X-375-US3 $73 (Bright Brass - BHMA605) $73 RD (Radiused Corners) add $5 Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS

478L0 / 478R0 Faceplate

Same dimensions as 478 - except 3/16" cavity offset.

60% LESS FRAME CUTTING of Frame Face for ANSI 4 7/8" pre-prep frames. The strike opening on this face plate is offset by 3/16" from the center to accommodate door sag for the 478 (just change faceplates, and use the same mechanism)

Accommodates for door sag.

See page 38, the 478, for pricing and finish.

THE SMALLEST ELECTRIC STRIKE IN THE WORLD

234 Faceplate - Smallest Electric Strike in the World

For new or replacement installations in metal frames. Use with cylindrical locksets having up to 5/8" throw, based on 1/8" door gap.

Price: 234-26D

$26 itin Chrome - BHMA651) 234-US10B $29

(Dark Bronze Powder Coat - BHMA613E) 234-US 3

$39 ight Brass - BHMA605) 234-US4 $29 (Satin Brass - BHMA606)

Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS

234X-375 Extended Faceplate

Standard ANSI prep features an extended ramp to accommodate additional face of Timely^®/Redi^®

frames. Ramp is extended 3/8". For new or replacement installations. Use with cylindrical locksets having up to 5/8" throw, based on 1/8" door gap.

Price:

234X-375-26D $31 234X-375-US10B (Dark Bronze Powder Coat - BHMA613E) $34 234X-375-US3 $41 (Bright Brass - BHMA605)

Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS

Great for wood frames!

Made for Timely®/Redi® Frames

334 Faceplate

For new or replacement installations in wood frames. Use with cylindrical locksets with up to 5/8" throw, based on 1/8" door gap.

Price:

334-26D $31 (Satin Chrome - BHMA651) 334-US3 $36 334-US4 $33 (Satin Brass - BHMA606)

Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS

$31

$34

$31

$34

HESMALLEST ELECTRIC STRIKE IN THE WORLD THE 3000 SERIES

258 Faceplate

80% less frame cutting when compared to typical 4 7/8" electric strike installations.

For new or replacement installations in aluminum frames. Use with 4510,

4710 & 4750 Adams Rite® dead latches. Replaces 4502 strike plate with slight modification.

Price:

258-26D (Satin Chrome - BHMA651) 258-US10B

(Dark Bronze Powder Coat – BHMA613E)

Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS

258RD Radius Faceplate

80% less door cutting when compared to typical 4 7/8" electric strike installations.

For new or replacement installations in aluminum doors. Use with 4510, 4710 & 4750 Adams Rite® dead latches. Replaces 4502 & 4900 strike plate with slight modification.

Price:

258RD-26D (Satin Chrome – BHMA651) 258RD-US10B (Dark Bronze Powder Coat – BHMA613F)

Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS

the radius surface of the door.

RH-Right Handed Strike Shown

458 Faceplate

80% LESS FRAME CUTTING.

Fills the frame preparation of Adams Rite® MS Locks without relocating tabs for 6 7/8" electric strikes. For new or replacement installations in aluminum frames. Replaces Adams Rite® 4730/4501 strike plate with slight frame modification.

Price:

458-ALUM (Aluminum Powder Coat) 458-DKBZ (Dark Bronze Powder Coat

-BHMA613E)

oat $58

$58

Match with any 3000 Mechanism: 3012, 3024, 30LC, 30RS **Must Specify Handing**

RH or LH

Note: Faceplates are powder coated.

LESS CUTTING IS BETTER THE 3000 SERIES

ANSI FACEPLATE SOLUTIONS

RED ON DIAGRAMS = AMOUNT OF CUTTING

ALUMINUM FACEPLATE SOLUTIONS

3000 SERIES STRIKES REDUCE AMOUNT OF LABOR, TIME, AND MATERIAL LOST ON DOOR FRAME

Note: 3000 series strikes not recommended for use on uncovered exterior doors.

FRAME PREPS sais 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2000 SERIES 2 THE 3000 SERIES

FRAME PREPS THE 3000 SERIES

258 ALUMINUM FRAME

FOR MOUNTING.

FRAME PREPS THE 3000 SERIES

NOTE: USE 2 INCH LONG (OR LONGER) WOOD SCREWS FOR MOUNTING.

Light Commercial Electric Strikes

The original Trine line

Light Commercial Electric Strikes

00 Series

FEATURES	Voltage	Amps	Ohms	Sound	Duty	Wire Color
Durability - 500,000 Life Cycles Holding Force - 1000 lbs	8-16VAC/4-6VDC	1.3-2.7	1.4	Buzz	Intermittent	Blck
Only 1 Moving Part Locking Mechanism	12VDC	0.40	30.0	Silent	Continuous	Red/Wht
Non-Handed Operation Heavy Duty Latch Spring	24VAC	1.40	4.7	Buzz	Intermittent	Red
• Fail Secure Standard (Unlocks with Power)	24VDC	0.19	125.0	Silent	Continuous	Blck/Wht

001

For use in new or replacement installations in wood and metal jambs. For use with locksets having up to 5/8" throw, based on 1/8" door gap.

Face Plate 5-7/8" x 1-1/4" – Mortise Backset 1-9/16" – Cavity Depth 1/2" – Cavity Width 9/16" – Cavity Height 1-1/2"

Price:
001 (Brass Powder Coated)	$53
001C (Satin Chrome – BHMA651)	$60
RS (Fail Safe) - For DC Models only.	add $20

002

For use in new or replacement installations in wood and metal jambs. Auxiliary lever ramps for use with locksets which contain dead locking levers. Use with locksets having up to 5/8" throw, based on 1/8" door gap.

Face Plate 7-15/16" x 1-7/16" – Auxiliary Ramp 2-7/8" – Mortise Backset 1-9/16" – Cavity Depth 1/2" – Cavity Width 9/16" – Cavity Height 1-1/2"

Price:
002 (Aluminum Powder Coated)	$86
002DB (Dark Bronze Powder Coated)	$89
RS (Fail Safe) - For DC Models only.	add $20

003

For surface mount installations on wood or metal jambs for in swinging applications with surface mount. Use with locksets and night latches having up to 5/8" throw, based on 1/8"door gap. When mounted on a pair of doors, strike is mounted to the inactive leaf.

Surface Mount - Case 4-11/16" x 1-1/4" - Cavity Depth 1/2" - Cavity Width 9/16" - Cavity Height 1-1/2"

Price:
003 (Grey Moulded Cover)	$96
RS (Fail Safe) - For DC Models only.	add $20

004

For new or replacement installations in wood jambs. Use with locksets with individual dead bolts. Dead bolts cannot be released electrically. Use with locksets having up to 5/8" throw, based on 1/8" door gap.

Face Plate 6-1/4" x 1-3/8" – Dead bolt Knockouts Top & Bottom 1-11/16" x 9/16" – Mortise Backset 2-3/4" – Cavity Depth 1/2" – Cavity Width 9/16" – Cavity Height 1-1/2"

Price:
004 (Brass Powder Coated)	$98
004C (Satin Chrome – BHMA651)	$105
004DB (Dark Bronze Powder Coated)	$103
RS (Fail Safe) - For DC Models only.	add $20

00 Series

005

For use in replacement installations in wood jambs and iron gates. Use with bored cylindrical locksets having up to 5/8" throw, based on 1/8" door gap.

Face Plate 3-1/2" x 1-3/8" – Mortise Backset 2-3/4" – Cavity Depth 1/2" – Cavity Width 9/16" – Cavity Height 1-1/2"

Need to upgrade to something stronger?

- Try the HD005 (below)

Price:
005 (Brass Powder Coated)	$65
005C (Satin Chrome – BHMA651)	$71
RS (Fail Safe) - For DC Models only.	add $20

HD005

Screwed-on Faceplate and reinforced Latch Pin provide additional strength for HEAVY DUTY installations.

For use in replacement installations in wood jambs and iron gates. Use with bored cylindrical locksets having up to 5/8" throw, based on 1/8" door gap.

Face Plate 3-1/2" x 1-3/8" – Mortise Backset 2-3/4" – Cavity Depth 1/2" – Cavity Width 9/16" – Cavity Height 1-1/2"

Price:
HD005 (Brass Powder Coated)	$86
HD005C (Satin Chrome – BHMA651)	$91
RS (Fail Safe) - For DC Models only.	add $20

S005

For use in replacement installations in wood jambs and iron gates. Use with bored cylindrical locksets having up to 3/4" throw, based on 1/8" door gap.

Face Plate 3-1/2" x 1-3/8" - Mortise Backset 2-7/8" - Cavity Depth 5/8" - Cavity Width 23/32" - Cavity Height 1-1/2"

Price:
$005 (Brass Powder Coated)	$76
S005C (Satin Chrome - BHMA651)	$84
RS (Fail Safe) - For DC Models only.	add $20

006

For surface mount installations on metal or wood jambs, for in swinging applications. Use with locksets or night latches having up to 5/8" throw, based on 1/8" door gap. When mounted on a pair or doors, strike is mounted to the inactive leaf.

Case 2-1/8" x 1-3/16" - Surface Mounted - Die Cast Housing - Cavity Depth 1/2" - Cavity Width 1/2" - Cavity Height 1-3/8"

Price:
006 (Brass Powder Coated)	$107
RS (Fail Safe) - For DC Models only.	add $20

007

For use in new or replacement installations in wood jambs. Use with locksets having up to 3/4" throw, based on 1/8" door gap.

Face Plate 4-7/8" x 1-1/4" - Mortise Backset 2-7/8" - Cavity Depth 5/8" - Cavity Width 3/4" - Cavity Height 1-1/2

Price:
007 (Brass Powder Coated)	$101
007C (Satin Chrome - BHMA651)	$106
RS (Fail Safe)	add $20

Light Commercial Electric Strikes

The Adjustable 2000 Series

FEATURES

• Allows adjustment for wider latch bolts & poorly aligned doors & locksets
• 1/8" Horizontal Latch Adjustment
• Releases Under Slight Door Preload
• Life Cycles 500,000
• Holding Force 900 lbs
• Solid Cast Latch Chrome Plated
• Non-Handed Operation

Voltage	Current/Amps	Ohms	Sound	Duty
6-14VAC 0.44 - 1	10 8.5	Buzz	Intermi	ttent
6-14VDC	0.70 - 1.60	8.5	Silent	Intermittent
16-24VAC	0.22 - 0.33	50.0	Buzz	Intermittent
16-24VDC	0.32 - 0.47	50.0	Silent	Intermittent
12VDC	0.200	60.0	Silent	Continuous
24VDC	0.12	120.0	Silent	Continuous

2001

For use in new or replacement wood or metal jamb installations with locksets having up to 5/8" throw, based on 1/8" door gap.

Face Plate 5-7/8" x 1-1/4" - Narrow Style Face Plate - Mortise Backset 1-9/16" - Cavity Depth 9/16" - Cavity Width 5/8" - Cavity Height 1-11/16"

Price: 2001 $96 2001C $102 (Satin Chrome - BHMA651)

NOT AVAILABLE IN FAIL-SAFE FUNCTION. SEE 001 ON PAGE 47

2002

For use in new or replacement, aluminum or hollow, metal jamb installations. Auxiliary lever ramps for use with locksets containing dead-locking levers. Use with latch bolts having up to 5/8" throw, based on 1/8" door gap.

Face Plate 7-15/16" x 1-7/16 - Auxiliary Ramp Height 2-7/8" -Mortise Backset 1-9/16" - Cavity Depth 9/16" - Cavity Width 5/8" - Cavity Height 1-11/16"

2007

For use in new or replacement installations in metal jambs. Fits a standard 4-7/8" ANSI prep with little jamb modification. Use with locksets having up to 5/8" throw, based on 1/8" door gap.

Steel Face Plate 4-7/8" x 1-1/4" - Narrow Style Face Plate - Mortise Backset 1-9/16" - Cavity Depth 9/16" - Cavity Width 5/8" - Cavity Height 1-11/16""

Price: 2002	$111
(Aluminum Powder Coated) 2002DB (Dark Bronze Powder Coated)	$115
RS (Fail Safe) - For DC Models only.	add $20

2009

For use in new or replacement installations in metal jambs. Centerline of the latch is 3/8" below ANSI centerline for offset applications. Fits a standard 4-7/8" ANSI prep with little jamb modification. Use with locksets having up to 5/8" throw, based on 1/8" door gap.

Steel Face Plate 4-7/8" x 1-1/4" - Narrow Style Face Plate - Mortise Backset 1-9/16" - Cavity Depth 9/16" - Cavity Width 5/8" - Cavity Height 1-11/16"

Price:
2007 (Brass Powder Coated)	$117
2007C (Satin Chrome – BHMA651) 2007DB	$122
(Dark Bronze Powder Coated)	$120

add $20

RS (Fail Safe)

- For DC Models only.

2012

For use in new or replacement,, aluminum or hollow, metal jamb installations with locksets having up to 5/8" throw, based on 1/8" door gap.

Steel Face Plate 4-7/8" x 1-1/4" - Auxiliary Ramp 3-3/8" - Mortise Backset 1-9/16" - Cavity Depth 9/16" - Cavity Width 5/8" - Cavity Height 1-11/16

Price: 2012 (Brass Powder Coated) 2012C (Satin Chrome - BHMA651) 2012DB (Dark Bronze Powder Coated)	$129 $131 $129
RS (Fail Safe) - For DC Models only.	add $20

The Adjustable 2000 Series

2678

For use in new or replacement aluminum, or hollow, metal jamb installations. Auxiliary lever ramps for use with locksets containing dead-locking levers. Useful when converting an MS Lock to a dead latch. Up to 5/8" throw, based on 1/8" door gap.

Face Plate 6-7/8" x 1-1/4" - Auxiliary Ramp 3-3/8" - Mortise Backset 1-9/16" - Cavity Depth 9/16" - Cavity Width 5/8" - Cavity Height 1-11/16"

Price:
2678 (Satin Aluminum - BHMA 628) 2678-US10B	$125 $125
(Satin Bronze – BHMA639)	$ T 25
RS (Fail Safe)

add $20

The ANSI 01 Series

- For DC Models only.

EATURES

Durability - 300,000 Life Cycles Holding Force - 1200 lbs Solid Brass Locking System Cast Steel Latch Heavy Duty Latch Spring

Voltage	Current/Amps	Ohms	Sound	Duty
10-16VAC & 12VDC	0.60 - 0.90 0.50	10.0 10.0	Buzz Silent	Intermittent Intermittent
24VAC	0.42	47.0	Buzz	Intermittent
24VDC	0.20	119.0	Silent	Continuous

012

For new or replacement installations in metal jambs. Use with locksets having up to 5/8" throw, based on 1/8" door gap.

Face Plate 4-7/8" x 1-1/4" - Mortise Backset 1-5/8" - Cavity Depth 9/16" - Cavity Width 9/16" -Cavity Height 1-1/2"

Price:
012 (Brass Powder Coated)	$127
012C (Satin Chrome – BHMA651)	$131
RS (Fail Safe) - 24DC Model only.	add $30

The 1000 Series

F	EATURES	Voltage	Current/Amps	Ohms	Sound	Duty
•	Releases Under Slight Door Preload	6-14VAC	0.495 - 1.09	8.5	Buzz	Intermittent
•	Tall latch cavity for easier door alignment.	6-14VDC	0.650 - 1.24	8.5	Silent	Intermittent
•	Life Cycles - 500,000 Holding Force - 1000 lbs	16-24VAC	0.270 - 0.48	50.0	Buzz	Intermittent
•	Non-Handed Operation	16-24VDC	0.380 - 0.61	50.0	Silent	Intermittent

1001-2

For use in new or replacement installations in wood and metal jambs. For use with locksets having up to 5/8" throw, based on 1/8" door gap.

Steel Face Plate 5-7/8" x 1-1/4" - Narrow Style Face Plate - Mortise Backset 1-1/2" - Cavity Depth 9/16" - Cavity Width 9/16" - Cavity Height 1-11/16"

Price:
1001-2 (Brass Powder Coated) 1001-2C (Satin Chrome - BHMA651)	$75 $81

1002-2

For use in new or replacement installations in wood and metal jambs. Auxiliary lever ramps for use with locksets which contain dead locking levers. For use with locksets having up to 5/8" throw, based on 1/8" door gap.

Face Plate 7-15/16" x 1-7/16" - Auxiliary Ramp 2-7/8" Height - Mortise Backset 1-1/2" - Cavity Depth 9/16" - Cavity Width 9/16" - Cavity Height 1-11/16"

Price:

1002-2 (der Coated) 1002-2DB (Dark Bronze Powder Coated)

$98 $101

THE INSTALLATION SOLUTION FOR THE TRINE STRIKES

4850-ITL

"Feel" the door work with the strike on the frame... then drill.

• 4850-ITL installation tool has magnets installed which allows it to attach to steel frames, so you can:
  • Adjust and center the strike before ever drilling a hole eliminating any mistakes.
  • Increase your installation speed on every job.
• 1/4" Spacer included, so the tool becomes 3/4" thick, and is also magnetized. (screws on side anchor the spacer to the tool)
• Included custom center punch makes precise marks on the frame for drilling. Marks all anchor pin holes, mounting screws, power, and optional LB sensor.
• Patented

Price:

4850-ITL

$399

To really see the POWER of the 4850-ITL watch our video...

Search "4850ITL" on Youtube

ANSI-ITL

A comprehensive installation tool for our Premium 2-3/4" and 4-7/8" ANSI electric strikes

The ANSI-ITL installation tool was designed to allow you to easily install these popular strikes:

• o 234
• o 234X-375 o 4200
• 4100

• 4100DBDL
• 0 478

• 478X-375
• o EN400
• Screw directly into the pre-existing tabs and mark.
• Carbide tip scribe included
• Adjustability allows for use with Timely^®/Redi^®/Raco^® style frames.

Price: ANSI-ITL $69

Accessories

Wireless Chimes

234WB -- STROBE CHIME "See" Your Door Ring!!

• Sound and Sight 8 note Westminster or 2-note sound with flashing parallel light
• Simply plug-in as many as desired wherever desired
• Volume control- adjust to desired intensity
• Up to 100 ft. operating range
• 128 selectable channels. Setting the same code on multiple devices will allow them to chime at the same time (if within range). Setting different codes will allow multiple chimes in proximity to work without interference.
• · 80db at 3 feet at max setting
• 6 Foot-Candles strobe output
• FCC-IC approved, UL, CSA recognized

Price: 234WB $92

232 -- BATTERY OPERATED

• Field selectable 2 note or 1 note
• Requires 3 "C"batteries (not included)
• Up to 100ft operating range
• 64 selectable security codes. Setting the same code on multiple devices will allow them to chime at the same time (if within range). Setting different codes will allow multiple chimes in proximity to work without interference
• A-23 battery included
• FCC-IC approved

233 -- PLUG IN

• Field selectable 8 note or 2 note
• Plugs into 120VAC outlet
• Automatically paired out of box. Maximum of 5 pushbuttons may be linked to 1 wireless chime at a time
• Up to 150 ft. operating range (increased range)
• A-23 battery included
• UL recognized, FCC-IC approved

233 unit was updated as of 10/31/19 See website for more information and instruction sheet.

New Upgraded Wireless Controller & Transmitter

017TDC-4 - WIRELESS CONTROLLER UTILIZES ROLLING CODE

• 500' Range
• 2 Channel receiver and transmitter
• Independently programmable A & B channel.
• 4, 8, 16 second delay or alternate action trigger
• Dry contact relay rated up to 30V @ 5 amps
• Single push button program erase (for security)
• Screw terminal connections
• Up to 8 transmitters per one receiver.
• FCC-IC approved.

018-4 - WIRELESS TRANSMITTER

TWO BUTTON TRANSMITTER

• Four color options
• 8 transmitters per receiver.
• LED indicates operation
• Rolling Code technology provides self learning and 4+ billion codes.
• A-23 Battery Included
• FCC-IC approved

PLEASE SPECIFY COLOR WHEN ORDERING

www.trineonline.com

Price:

018-4-BLK 018-4-BLU 018-4-RED 018-4-WHT

$38

Accessories

Door Alarms, Switches, & Motion Alerts

206-2 - MOTION ALERT ANNUNCIATOR

• Moving objects are detected by changes in reflected light
• Battery operated with 2 "C" cells (not included)
• 3 selectable tones, 8 note melody, 2 note repeated, 2 note alternating tone
• Off, high & low volume control switch 77db (low) and 84db (high) @ 3 ft
• Durable white moulded plastic case 3-1/6" x 4-3/8" x 2-3/8"

Price: 206-2

$29

206-3 - WIRELESS ENTRY/EXIT SIGNAL KIT

• 1 note, 2 note or 8 note melody chime, field selectable
• Wireless battery-operated door contact switch A-23 battery (included)
• Up to 100ft range 128 selectable codes. Setting the same code on multiple devices will allow them to chime at the same time (if within range). Setting different codes will allow multiple chimes in proximity to work without interference
• Receiver plugs into 120 VAC outlet
• Adjustable volume control, 74db (low) 82db (high) @ 3ft
• UL recognized, FCC-IC approved

Price: 206-3 $59

215 – WINDOW/DOOR ENTRY/EXIT SIGNAL KIT

• N/O magnetic contact switch activates alarm
• User can set for Chime or 105db alarm sound
• On/Off switch
• No wiring
• (3) L1154 batteries (included)
• Contacts provided with mounting tape

342 - ELECTRIC DOOR SWITCH (NARROW STYLE)

• Face plate brass finish 3-7/8"H x 1-1/4"W
• Box 2-5/8"H x 1-3/16"W x 2-1/8"D
• Switch Rating: 120VAC, 10 Amps 250VAC, 5 Amps
• Field selectable N/C or N/O
• Stamped steel case UL, CSA listed switch & wire leads
• Faceplate Powder Coated Brass
• 4 knockouts 7/8"

Price: $22

Door Chimes, Bells, Buzzers, & Chime Kits

201 - CHIME KIT

• (1) White chime base, (2) Unlighted 66W white push buttons, and (1) 16VAC-10VA Hard wire transformer

Mounting hardware included, excluding wire

• Offers 2 note front door/1 note rear door ability

Price:

201 $30

203 - CHIME KIT

• (1) White chime base, (1) Lighted 45LG push button, and (1) 16VAC-10VA Hard wire transformer

Mounting hardware included, excluding wire

• Offers 2 note front door/1 note rear door ability

Price:

203

$30

240 - CHIME

· Chime base with solid white cover

Offers 2 note front door/ 1 note rear door ability

• Operating voltage 12-16VAC - Mounting base hardware provided

• 80 db sound at 3 feet – Outer dimension 7-1/4" x 4-3/4" x 1-7/8"

Price:

240 $30

296 - CHIME

· Chime base with solid white cover

Offers 2 note front door/1 note rear door ability

• Operating voltage 12-16VAC – Mounting base hardware included

• 75db sound at 3 feet - Outer dimension 1-1/8" x 4" x 2"

Price:

296 $22

270 - BUZZER

Enclosed buzzer – 92db sound at 3 feet

• Operating range 3-6VDC, 8-16 VAC, 1 Amp draw

Aluminum powder coat finish

Includes mounting hardware

Price:

270 $17

272 - BELL

• 100 db sound at 3 feet - 2-1/2" open bell

• Operating range 3-6VDC, 8-16 VAC, 1 Amp draw

Aluminum powder coat finish

Includes mounting hardware

Price: 272

$19

274 - BELL

• 100 db sound at 3 feet - 4" open bell

Operating range 3-6VDC, 8-16 VAC, 1 Amp draw

Aluminum powder coat finish

Includes mounting hardware

Price: 274

$21

275 - ENCLOSED BELL

• 88 db at 3 feet

• Operating range: 3-8VDC, 1.4 Amp draw

• 6-8VAC, 0.7 Amp draw

• Grey finish - Includes mounting hardware

Price:

275 $24

276 - ENCLOSED BELL & BUZZER

88 db at 3 feet Operating range: 3-8VDC, 1.4 Amp draw

• 6-8VAC, 0.7 Amp draw

• Grey finish - Includes mounting hardware

www.trineonline.com

Price:

276 $28

Accessories

Transformers

For electric strikes, bells, buzzers, chimes, and other low voltage devices. A complete line of U.L. Listed step down transformers. Easy to install, low voltage, 120AC primary for residential, commercial and industrial uses. Transformers will safely take themselves off line when they overheat. Transformers can be either base mounted or attached to standard knockouts on boxes or cabinets (except plug-in types.) All primary leads are pre-stripped for quick connection.

522 - (1) - LOCKNUT TYPE (AC)

• For standard 1/2" knockouts

• 120 volt primary AC

Price:

• 2-5/32"D x 2-1/2"H x 2"W 8oz

Electric Characteristics:

16VAC -- 10VA -- 0.625 AMPS

522 $19

525 - (2) - CLAMP ON TYPE/TRI VOLT (AC)

Equipped with convenient screw-bracket mounting clamp for standard 1/2" knockouts

• 120 volt primary AC

• Electric Characteristics:

• Electric Characteristics:

• Electric Characteristics:

• 2-1/4"D x 2-3/16"H x 2-5/16"W 13oz

8VAC - 10VA - 1.25 AMPS

16VAC -- 10VA -- 0.62 AMPS 24VAC -- 20VA -- 0.83 AMPS

Price:

5

525 $27

$\backslash bullet$ Equipped with convenient screw-bracket mounting clamp for standard 1/2" knockouts

• 120 volt primary AC

• 2-15/16"D x 2-7/32"H x 2-11/32"W 1lb 6oz

8VAC - 20VA - 2.50 AMPS

16VAC -- 30VA -- 1.88 AMPS

598 $30

24VAC - 30VA - 1.25 AMPS

599 - (2) - CLAMP ON TYPE (AC)

• Equipped with convenient screw-bracket mounting clamp for standard 1/2" knockouts

Price:

Price:

knockouts • 120 volt primary AC • 2-15/16"D x 2-3/16"H x 2-11/32"W 1lb 6oz

24VAC - 40VA - 1.65 AMPS

599 $31

5201 - (3) - PLUG IN TYPE (AC)

• 120 volt primary AC • 2"D x 3"H x 2-1/2"W 7oz

• Electric Characteristics: 24VAC - 20VA - 0.834 AMPS

Price: 5201 $27

Price:

5203

• 120 volt primary AC • 2"D x 3"H x 2-1/2"W 7oz

• Electric Characteristics: 16VAC -- 20VA -- 1.250 AMPS

5204 - (3) - PLUG IN TYPE (AC)

• 120 volt primary AC • 2"D x 3"H x 2-1/2"W 7oz

• Electric Characteristics: 12VAC - 20VA - 1.667 AMPS

Price: 5204 $27

$27

5205 - (4) - PLUG IN TYPE/TRI VOLT (AC)

• 120 volt primary AC • 2"D x 3"H x 2-1/2"W 7oz

• Electric Characteristics: 8VAC - 10VA - 1.25 AMPS 16VAC - 10VA - 0.62 AMPS

24VAC -- 20VA -- 0.83 AMPS

5205 $32

5208 - (5) - PLUG IN TYPE (DC)

• 120 volt primary AC, Corded output lead • 2"D x 3-1/4"H x 2-3/8"W 1lb 2oz

• Electric Characteristics: 12VDC - 12VA - 1.00 AMPS

Price: 5208 $34

5209 - (5) - PLUG IN TYPE (DC)

• 120 volt primary AC, Corded output lead • 2"D x 3-1/4"H x 2-3/8"W 1lb 2oz

• Electric Characteristics: 24VDC - 12VA - 0.50 AMPS

Price: 5209 $34

Price:

SR1

(ĥr)

(5)

SR1 - (6) - SILICON RECTIFIER (SR-1) Not Recommended for 4850

• For converting AC voltage to DC voltage • For AC power supplies up to 27 volt AC 1 amp.

Note: DC strikes do not buzz, click only Size 1" x 1/2" x 1"

• Electric Characteristics: 12-27VAC - 1.00 AMPS

www.trineonline.com

57

$28

Pushbuttons

*PUSH BUTTONS MUST

JRP, SRP

45A,

45G, 45LG

66 Series

71 Series 71A & 71G Shown

91P

		JIED*
	Price: JRP	$9.00
	Price: SRP	$10 .00
	Price: 45A	$6 .50
	Price: 45G	$6 .50
	Price: 45LA	$8.50
	Price: 45LG	$8 .50
2.1/2" Rody Diamotor *Sold in single packs*	Price: 65P	$59.00
	Price: 66B	$6 .50
	Price: 66C	$6 .50
	Price: 66 G	$6 .50
	Price: 66W	$6 .50
	Price: 66LB	$9.00
	Price: 66LC	$9.00
	Price: 66LG	$9.00
2-3/4"L X 3/4"W X 5/8"H – for use up to 16 volts AC or DC	Price: 66LW	$9.00
	Price: 71A	$10.00
	Price: 71DB	$10.00
	Price: 7 1 G	$10.00
	Price: 71LA	$11 .00
	Price: 71LDB	$11 .00
	Price: 71LG	$11 .00
	Price: 91P	$20.00
	Price: 94P	$22.00

Glossary

ALTERNATING CURRENT (AC)

An electric current that reverses direction in a circuit at regular intervals.

CONTINUOUS DUTY

A device that is designed to operate continuously without rest.

CURRENT

Measured flow of electrons through an electrical conductor. Normally measured in amperes.

DIRECT CURRENT

An electric current flowing in one direction.

HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE.

FAIL SAFE

A device that is normally open and locks when power is applied to the unit. Example: During a loss of power the device remains open. Often listed as "RS"

FAIL SECURE

A device that is normally closed or locked until power is applied. Example: During a loss of power the device remains locked.

FUSE

A device that is placed in the path of energy that will break the circuit if the current becomes too great. This is accomplished by having a strip or metal that will melt when the current exceeds the required amount.

INTERMITTENT DUTY

A device that is designed to operate for a short period of time; generally less that 45 seconds.

NORMALLY OPEN

The contacts of a switch or relay are normally open or not connected. When activated the contacts close or become connected. EXAMPLE: A switch is not depressed and the circuit is not complete.

NORMALLY CLOSED

The contacts of a switch or relay are normally closed or connected. When activated the contacts open or become disconnected. EXAMPLE: A switch is not depressed and the circuit is complete.

The measure of resistance of an electrical device to resist the flow of energy.

RECTIFIER

A device that is commonly used to convert AC to DC. Commonly used to silence the audible sound that an electrical strike can make while energized on AC current.

RELAY

An electro-magnetic device activated by a variation in conditions in one electric circuit and controlling a larger current or actuating other devices in the same or another electric circuit.

STANDARD VOLTAGE

Electric door strike supplied with magnetic coils: 4-6VDC/8-16VAC. Electric door strikes supplied with a solenoid coil: 6-10VDC, 10-16VAC: other voltages available.

TRANSFORMER

A device consisting essentially of two or more coils of insulated wire that transfers alternating current byelectro-magnetic induction from one winding to another at the same frequency, but usually with changed voltage & current.

VOLT

A unit of electric potential equal to the difference of electric potential between two points that have a resistance of one ohm and through which a current of one amperes is flowing.

VOLTAGE DROP?

We recommend the following wire sizes:

L2V	24V
L8 AWG	20 AWG
L6 AWG	18 AWG
L4 AWG	16 AWG
L2 AWG	14 AWG
	L2V L8 AWG L6 AWG L4 AWG L2 AWG

WATT

The power developed in a circuit by a current of one ampere flowing through a potential difference of one volt.

Strike Selector

What lockset do you have?

Cylindrical Lock

Mortise Lock

Your choice of electric strikes are:

SPECIALIZED SOLUTIONS

ELECTRIC STRIKE SERIES

Fire Rated (

В

ntertek

Ø

to match the frame.

4200

Surface Mount Strikes

3 Hour Fire. 1034. & 294 rated

400CMRP

• Aluminum
• Hollow Metal
• Wood

0

Use the 4100RX for Raco® frames (covers the extra 1/4" gap in the frame)

• Aluminum
• Hollow Metal
• Wood

Best strike for allowing deadbolt privacy with an override.

Independently

operated latches

4100DBDL

B

• Aluminum
• Wood

ONLY strike with Fascia Color Options -- Match the Fascia to vour frame!

• Aluminum
• Hollow Metal
• Wood

For use with the Yale Squarebolt® or Corbin Russwin Securebolt™

*NOTE*

Use the 4801

• Hollow Metal
• Wood

Great for Gates

F* for use on offset mortise locks in outdoor situations see 430/435 on pg 29

NIGHT LATCH ONLY FUNCTIONALITY - FOR MORTISE LOCKS WITH DEADBOLTS

4200CC-10B-32D 4-7/8" faceplates only, two color options included, best pricing option in the 4200 series.

4200CC7-10B-32D

4-7/8" & 6-7/8" faceplates, two color options included.

B

Strike Selector

• Hollow
• Metal
• Wood

2-3/4" WIDE PLATE. FITS IN TIGHT SPOTS IN THE HEADER

• Hollow Metal
• Wood
• Formed Sheet Metal
• Wood
• Sheet Metal
• Wood
• Metal
• minum Wood Formed Sheet
  • Metal • Wood
• Metal

Wood

• minum
• minum

CONDITIONS OF SALE Distributors and Other Commercial Customers

Note: The following Conditions of Sale are subject to change: All Sales Transactions are subject to the latest published Conditions of Sale of the Trine Access Technology Corporation and to any Special Conditions of Sale which may be contained in applicable Trine quotations and acknowledgements. Modified product warranties are provided to consumers.

1. ACCEPTANCE, GOVERNING PROVISIONS AND CANCELLATIONS. No order for Trine Access Technology or services shall be binding upon Trine until accepted by a writing of an authorized official of Trine or by shipment or other performance of such order. Any such order shall be subject to these Conditions of Sale, and acceptance shall be expressly conditioned on assent to such Conditions, which assent shall be deemed given unless purchaser shall expressly notify Trine to the contrary prior to the earlier of any shipment or other performance of an order by Trine or within five (5) days after purchaser's receipt of any acknowledgement or confirmation of such order. Trine expressly reserves the right to reject and withdraw acceptance of any order.

No order accepted by Trine may be altered or modified by purchaser unless agreed to in a writing signed by an authorized official of Trine; and no such order may be cancelled or terminated except upon payment of Trine's loss, damage and expense arising from such cancellation or termination. These Conditions of Sale may not be supplemented or modified by course of dealing, course of performance or any oral communication between the parties. No modified or other conditions will be recognized by Trine unless specifically agreed to in writing and failure of Trine to object to provisions contained in any purchase order or other communication from a purchaser (including, without limitation, penalty clauses of any kind) shall not be construed as a waiver of these Conditions nor an acceptance of any such provisions.

Unless otherwise agreed in writing by a duly authorized representative of Trine, products sold hereunder are not intended for use or in connection with a nuclear facility or activity. If so used, Trine disclaims all liability for any nuclear damage, injury or contamination, and purchaser shall indemnify Trine against any such liability, whether as a result of breach of contract, warranty, tort (including negligence) or otherwise. Any contract for sale and these Conditions shall be governed by and construed according to the laws of the State of Connecticut. Any dispute arising out of or relating to these Conditions of Sale or any matter relating hereto shall be brought in the federal or state courts sitting in or for the Bethel, Connecticut, and the parties waive any objection they may have to the jurisdiction or subject matter of these courts.

2. QUOTATIONS AND PRICES. Written quotations are conditioned upon acceptance by purchaser within thirty (30) days from the date issued and shall be considered as offers by Trine to sell during such thirty (30) day period on these Conditions of Sale unless sooner terminated by notice. Other Trine publications are maintained as sources of general information and are not quotations or offers to sell.

All clerical errors are subject to correction.

MINIMUM ORDER: $100.00 Net. DROP SHIP FEE: Trine reserves the right to charge a fixed fee of $10.00 for shipping to an address other than customers.

All prices are subject to change without notice. In the event of a net price change, the price of equipment on order but unshipped will be adjusted to the price in effect at the time of shipment. Downward adjustment of prices shall apply only to unshipped portions of outstanding orders.

3. PAYMENT TERMS. Unless otherwise agreed by Trine, terms of payment for Trine products to purchasers of satisfactory credit are either (1) a 1% cash discount for all invoices paid in full if the payment is received by Trine within 10 days after the date of Trine's invoice or (2) full payment to be received by Trine within 30 days after the date of Trine's invoice. Applicable terms of payment are stated in quotations or on the discount sheet for the product involved. Cash discount will apply only to the net amount of the invoice after transportation charges and taxes. A late charge of 1% per month or the maximum amount permitted by law will be applied to all past due amounts.

Trine reserves the right at any time to demand full or partial payment before proceeding with a contract of sale if, in its judgment, the financial condition of purchaser shall not justify the terms of payment specified. If delivery is delayed or deferred by purchaser beyond the scheduled ate, payment shall be due in full when Trine is prepared to ship and the products may be stored at the risk and expense of purchaser. If purchaser defaults when any payment is due, then the whole contract price shall become due and payable upon demand, or Trine, at its option, without prejudice to other lawful remedies, may defer delivery or cancel the contract for sale.

• 4. TAXES AND OTHER CHARGES. Any manufacturer's tax, retailer's occupation tax, use tax, sales tax, excise tax (except the Federal excise tax on vehicles), duty, custom, inspection or testing fee, or other tax, fee or charge of any nature whatsoever, imposed by any governmental authority, on or measured by any transaction between Trine and purchaser, shall be paid by purchaser in addition to the prices quoted or invoiced. In the event Trine shall be required to pay any such tax, fee or charges, purchaser shall reimburse Trine therefore; or, in lieu of such payment, purchaser shall provide Trine at the time the order is submitted with an exemption certificate or other document acceptable to the authority imposing the same. Purchase orders must state the existence and amount of any such tax, fee or charge which it shall be Trine's responsibility to collect from purchaser and pay.
• 5. DELIVERY. Delivery of products to a carrier at any Trine facility or other shipping point shall constitute delivery to purchaser; and, regardless of freight payment, title and all risk of loss or damage in transit shall pass to purchaser at that time. Trine cannot be held responsible for breakage after having received "in good order" receipts from the transportation company. All claims for loss and damage must be made by purchaser to the carrier. Claims for shortages or other errors must be made in writing to Trine within 15 days after receipt of shipment, and failure to give such notice shall constitute unqualified acceptance and a waiver of such claims by purchaser. Unless otherwise agreed by Trine in quotations, discount schedules, catalogs or other Trine publications, all expenses of freight FOB Trine's place of shipment shall be borne by purchaser. No allowance will be made in lieu of transportation if purchaser accepts shipment at factory, warehouse, freight station, or otherwise supplies its own transportation. Method and route of shipment will be at the discretion of Trine unless purchaser shall specify otherwise, and any additional expense of the method or route of shipment specified by purchaser shall be borne by purchaser. Trine reserves the right to make delivery in installments, unless otherwise expressly stipulated in the contract for sale; and all such installments when separately invoiced shall be paid for when due per invoice, without regard to subsequent deliveries. Delay in delivery of any installment shall not relieve purchaser of its obligations to accept remaining deliveries.
• 6. SUBSTITUTES. Trine may furnish suitable substitutes for materials unobtainable because of priorities or regulations established by governmental authority or non-availability of materials from suppliers, and assumes no liability for deviation from published dimensions and descriptive information not essential to proper performance of the products.
• 7. WARRANTIES TO DISTRIBUTORS AND OTHER COMMERCIAL CUSTOMERS. Trine warrants products manufactured by it to be free from defects in materials and workmanship for a period of one (1) year from date of shipment by Trine, except for all Axion (R) labeled products which are covered for two (2) years from date of shipment by Trine. If within such period any such products shall be proved to Trine's satisfaction to be so defective, such products shall be repaired or replaced at Trine's option. This warranty shall not apply (a) to products not manufactured by Trine, (b) to products which shall have been repaired or altered by other than Trine so as, in its judgment, to affect the same adversely, or (c) to equipment which shall have been subjected to negligence, accident or damage by circumstances beyond Trine's control, or to improper operation, maintenance or storage, or to other than normal use or service. With respect to products not manufactured by Trine, the warranty obligations of Trine shall in all respect conform and be limited to the warranty actually extended to Trine by its supplier. The foregoing warranties do not cover reimbursement for transportation, removal, installation, or other expenses which may be incurred in connection with repair or replacement. Except as may be expressly provided in an authorized writing by Trine, Trine shall not be subject to any other obligations or liabilities whatsoever with respect to products manufactured by Trine or services rendered by Trine.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

• 8. LIMITATION OF LIABILITY. Anything to the contrary herein contained notwithstanding, TRINE ACCESS TECHNOLOGY, ITS CONTRACTORS AND SUPPLIERS OF ANY TIER SHALL NOT BE LIABLE IN CONTRACT, IN TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE FOR ANY SPECIAL, INDIRECT, INCIDENTAL CONSEQUENTIAL, PUNITIVE, OR EXEMPLARY DAMAGES WHATSOEVER. The remedies of the purchaser set forth herein are exclusive where so stated and the total cumulative liability of Trine, its contractors and suppliers of any tier, with respect to this contract or anything done in connection therewith, such as the use of any product covered by or furnished under the contract, whether in contract, in tort (including negligence or strict liability) or otherwise, shall not exceed the price of the product or part on which such liability is based. Further, any claim purchaser may have with reference to Trine products or services sold or provided hereunder shall be deemed waived by purchaser unless asserted against Trine in writing within 90 days from the date the purchaser discovered, or should have discovered, the basis for the claim.
• 9. RETURN OF EQUIPMENT. No products may be returned without first obtaining Trine's written permission and a returned goods authorization number. Trine shall issue a credit to purchaser for returned goods, subject to the terms of this paragraph, and purchaser will not be entitled to any other form of reimbursement for returns. Products accepted for credit, not involving a Trine error, shall be subjected to a minimum service charge of $25.00, or a charge of 20% of invoice, whichever is greater, plus all transportation charges incurred by Trine. THE MINIMUM RESTOCKING CHARGE IS $25.00. Returned products must be securely packed to reach Trine without damage, any cost incurred by Trine to put the products in first class condition will be charged to purchaser.
• 10. PATENTS. As to products sold to purchaser by Trine, Trine shall defend any suit or proceeding brought against purchaser so far as based on a claim that said products constitute an infringement of any patent of the United States, if notified promptly in writing and given authority, information and assistance at Trine's expense for the defense of the same. In the event of a final award of costs and damages, Trine shall pay such award. In the event the use of said products by purchaser is enjoined in such a suit, Trine shall, at its own expense, either (a) procure for purchaser the right to continue using said products, (b) modify said equipment to render them non-infringing, (c) replace said products with non-infringing products, or (d) refund the purchase price (less depreciation) and the transportation and installation costs of said products. Trine will not be responsible for any compromise or settlement made without its written consent. The foregoing states the entire liability of Trine for patent infringement, and in no event shall Trine be liable if the infringement charge is based on the use of Trine products for a purpose other than that for which sold by Trine, any alteration to the Trine products or the use of the Trine products with any other product or service not manufactured by Trine. As to any products furnished by Trine to purchaser and manufactured in accordance with designs provided by purchaser, purchaser shall defend, indemnify and hold harmless Trine against any award made against Trine for patent, trademark, or copyright infringement.
• 11. PATTERNS AND TOOLS. Notice will be given if special patterns or tools are required to complete any order. Charges for such patterns or tools do not convey title thereto or the right to remove them from Trine's plant. If patterns or tools are not used for a period of two years, Trine shall have the right to scrap them without notice.
• 12. FORCE MAJEURE. Trine shall not be liable in damages or otherwise for delays in shipment or default in delivery for any reason of force majeure or for any cause beyond Trine's reasonable control including, but not limited to (a) an act of nature; (b) government action, war, riots, civil commotion, embargoes or martial laws, (c) Trine's inability to obtain necessary materials from its usual sources of supply, (d) shortage of labor, raw material, production or transportation facilities or other delays in transit, (e) other contingencies of manufacture or shipment. In the event of any delay in Trine's performance due in whole or in part to any cause beyond Trine's reasonable control, Trine shall have such additional time for performance as may be reasonably necessary under the circumstances. Acceptance by purchaser of any goods shall constitute a waiver by purchaser of any claim for damages on account of any delay in delivery of such goods.

Cross Reference Chart for Premium Electric Strikes

TRINE	Adams Rite	Folger Adam	H.E.S.	RCI	Von Duprin
4100			4500, 1500		6400 ф
			1006CLB ф		6211/6211WF ф
4100DB			1600/CDB, 1006/CDB *	2164	6400
4100CDBM		712/712-75/732 732-75/642CYL ©	1600CS
4100DBDL
4200	7100		5000	4200 w/ 4 faceplates	4200
	7400			S/L65U	5100
4200CC			5000C
4850			9400 ∆ , 9600	0563
4800F			9500, 9600	0162F	6300
4801			9700
EN400	7200	712/712-75/732 732-75/642CYL	1006J/7501	2114/F4114*	6211/6211WF
EN800**	74R1	310-4	7000-7835**	0161	6112
EN850**	74R2	310-4	7000-7895**
EN950		310-2	7505		6215/6226
EN960		310-2 3/4			6214/6224
3478F	7200			F4114
323478LC
323478F-LC
234 ∂
258 ‡ ∂
458 Ω ∂
478 ‡ ∂	7400+		5000/5200+501	L6514+
3250S0M-LC
3275VRP-LC

• Strike has 1-1/16" backset vs. 1" backset for 3000 Series.
• + Ω Requires 80% less cutting of frame. Fills the frame preparation of the Adams Rite MS Locks without the need To relocate tabs for 6 5/8" or 6 7/8" electric strikes.
• Requires 60% less frame face cutting other than models listed.
• ‡ <u>∆</u> * 9400 backplate means it can only handle up to a 1/2" throw – The 4850 can take up to a 1" throw.
• UL 90 Minute Fire Rated
• ** All Stainless Steel construction, not fire rated.
• Not a shallow (1 3/8") backset cannot be used in 2" fire rated frames with 1/2" sheetrock ingress
• Number is for the Faceplate use with a 3012, 3024, 30LC, or 30RS Mechanism, see pg 34 for more details.

There may be variations in physical size or electrical characteristics between manufacturers. Information in the above chart based on manufacturers' catalogs and reference should be made to manufacturer's catalog for complete detail comparisons. NOTE:

Trine Access Technology 2 Parklawn Drive, Suite F Bethel, CT 06801

PH: 203-730-1756 || FX:203-730-1781 www.trineonline.com

Effective Date March 1, 2020