This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.

Administrative Offices

Allegion Administrative Office 11819 N. Pennsylvania St. · Carmel, IN 46032 allegion.com/us

Placing orders

You can place orders with Allegion via the fax numbers or emails listed below:

Electronic Products

(Schlage, Electronic Locks, Electromagnetic Locks, Power Supplies and System Accessories) Fax#:1-800-452-0665

Email: Order_Entry_Schlage_Commercial@allegion.com

Von Duprin Electronic Products

(Power Supplies, Electric Strikes, Delayed Exit System and Electrical Power Transfer)

Fax#: 1-800-999-0328

Email: Order_VonDuprin@allegion.com

Biometric Readers

Fax#: 1-800-452-0665 Email: Sbsom@allegion.com

Readers, Credentials & Keypads

Fax#: 1-866-954-1779

Email: Readers.Credentials.Orders@allegion.com

Customer Care

Our Customer Care Representatives are available for questions or assistance. You can reach them at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for RSO) or through the email addresses listed below:

Sales Support

support@allegion.com

Technical Product Support

Schlage Electronic Locks & System Components (Electromagnetic Locks, Power Supplies and System Accessories) Electronic Lock TechProdSupport@allegion.com

Readers, Credentials & Biometrics

$Readers\backslash \_Credentials\backslash \_Biometrics\backslash \_TechProdSupport@allegion.com$

Von Duprin Electronics (Power Supplies, Electric Strikes, Delayed Exit System, Electrical Power Transfer)

Phone#: 1-866-422-5547

Exits_TechProdSupport@allegion.com

Request for Quote

Carolinas

(North Carolina, South Carolina, Virginia) Carolinas.Quotes@allegion.com

Central

(Arkansas, Illinois, Iowa, Kansas, Missouri, Nebraska, Oklahoma) Central.Quotes@allegion.com

Chicago

(Illinois-Northern, Wisconsin) Chicago.Quotes@allegion.com

Florida

Florida.Quotes@allegion.com

Great Lakes

(New York, Pennsylvania) GreatLakes.Quotes@allegion.com

Metro New York

Metro.Quotes@allegion.com

Michigan

Michigan.Quotes@allegion.com

Mid Atlantic North

(New York, Pennsylvania) Mid.Atlantics.north.quotes@allegion.com

Mid Atlantic South

(Delware, Maryland, New Jersey) Mid.Atlantics.south.quotes@allegion.com

Midwest

(Indiana, Kentucky, Ohio, West Virginia) Midwest.Quotes@allegion.com

Mountain States

(Colorado, Idaho, Montana, Nevada, Utah, Wyoming) Mtn.States.Quotes@allegion.com

New England

(Connecticut, Main, Massachusetts, New Hampshire, Rhode Island, Vermont) NewEngland.Quotes@allegion.com

North Central

(Minnesota, North Dakota, South Dakota) NorthCentral.Quotes@allegion.com

Northern California

NoCal.Quotes@allegion.com

Northwest

(Alaska, Oregon, Washington) Northwest.Quotes@allegion.com

South

(Alabama, Georgia, Louisiana, Mississippi, Tennessee) South.Quotes@allegion.com

Southern California

(California-Southern, Hawaii) SoCal.Quotes@allegion.com

Southwest

(Arizona, New Mexico) Southwest.Quotes@allegion.com

Texa

Texas.Quotes@allegion.com

Table of Contents

Contents		CO-220 Classroom Lockdown Solution - Exit Trim	198
Contact Information	2	CO-993DT – Non-Functioning Dummy Trim for Exit	200
Table of Contents	3	CO-250 Standalone; Computer Programmable with user Rights on
		Magnetic Stripe Card	202
TERMS AND CONDITIONS	4	CO-993DT Non-functioning Dummy Trim for Exit	208
Allegion General Terms & Conditions	4	CO Series Accessories	210
Product Warranties	10	CT5000 Offline Controller	212
Keyway and Cylinder Policies	14
Distribution Policy	19	PARTS	215
Finish Information	19	AD Series Parts	215
		CO Series Parts	229
SOLUTIONS OVERVIEW	21
		ELECTROMAGNETIC LOCKS	243
CREDENTIALS	23	M490 Max Security	244
SmartCard Credentials	26	M450 High Security	245
Proximity Credentials	29	M420 Traffic Control Series	246
Magnetic Stripe Credentials	30	M490DE Delayed Egress Series	247
		M390RFK Retrofit Lock	248
NETWORKED READERS	37	Filler Plates and Angle Brackets	249
Multi-Technology Readers	40	M490G Gate Lock	250
Magnetic Stripe Readers	40	320M Mini Mortise Mount	250
Contacless Smart Card Readers	40	GF3000 Shear Lock Mortise Series	251
Proximity Readers	40	GF-3000 Shear Lock Surface Series	252
Schlage Magnetic Stripe Readers	43	Electromagnetic Lock Parts	253
iButton Readers	43
Scramble Keypads from Schlage	44	POWER SUPPLIES	255
Electronic Keypads	44	PS902 Power Supplies + Option Boards	256
Offline Keypads	44	PS904 Power Supplies + Option Boards	257
		PS906 Power Supplies + Option Boards	258
MULTI-FAMILY RESIDENTIAL ELECTRONIC LOCKS	45
Schlage Control™ Smart Interconnect Locks	46	SYSTEM ACCESSORIES	259
Schlage Control™ Smart Deadbolts	48	8200 Series Consoles	260
Schlage Control™ Smart Deadbolts	50	800 Series Remote and Local Monitoring Stations	260
		672 TouchBar	261
ENGAGE™ TECHNOLOGY LOCKS	51	692 SmartBar	262
LE How to Order	53	672 TouchBar / 692 SmartBar Parts	263
LE Greenwich Sectional with Rose	62	600 Series Heavy Duty Pushbuttons	264
LE Addison Escutcheon	64	600 Series Heavy Duty Pushbutton Parts	265
LE Parts	66	700 Series Entry Level Pushbutton	266
LE Accessories	70	650 Series Heavy Duty Keyswitches	267
NDE with ENGAGE Technology	71	650 Series Heavy Duty Keyswitch Parts	268
NDE How to Order	72	Door Position Switches	269
NDE Wireless Lock Cylindrical	78	Door Cords	269
NDE Wireless Lock Parts	80	Electronic Horns	270
CTE ENGAGE Single Door Controller	84	Scanners/PIRs	270
		740 Series Emergency Break Glass	270
AD SERIES NETWORKED LOCKS	85	660 Series Surface Mini Box	270
AD Series How to Order	86	442S Series Cabinet Lock	271
AD-300 Networked Hardwired	100	PB405/PB405S PowerBolts	271
AD-302 Networked Hardwired (FIPS 201-2 Compliant)	106
AD-400 Networked Wireless	112	VON DUPRIN ACCESS CONTROL PRODUCTS	273
AD-402 Networked Wireless (FIPS 201-2 Compliant)	118	4200/6400 Series Electric Strikes	274
AD Series 993 Dummy Trim	124	5100/6100/6200 Series Electric Strikes	275
AD Series Networed Accessories	126	6300 Series Electric Strike	276
		PS914 Power Supply	276
AD SERIES STANDALONE LOCKS	131	Delayed Exit System	276
AD Series Standalone Locks How to Order	132	Electric Power Transfer	276
AD-201/AD-302/AD-402 Overview	133	Remote Undogging (RU) and Remote Monitoring (RM)	276
AD-200 Standalone; Rights on Locks	144
AD-201 Standalone (FIPS Compliant)	150	BIOMETRICS	277
AD-250 Standalone; Rights on Card	156	General Ordering Information	279
AD Series 993 Dummy Trim	162	Biometric Readers	280
CT5000 Offline Controller	164	Biometric Options	281
AD Series Standalone Accessories	166	Biometric Accessories	282
		Biometric Parts	283
CO SERIES STANDALONE LOCKS	169
CO Series How to Order	170	MISCELLANEOUS	285
CO Series Overview	171	Agency Listing	286
CO-100 Standalone; Manually Programmable	182	Door & Frame Handing Chart	288
CO-200 Standalone; Computer or Manually		System Design Guide	291
Programmable with user Rights on Locks	188	Key Systems Summary	293
CO-220 Standalone; Classroom Lockdown Solution	194	Wiring Diagrams	307
		BAA Order Transmittal Cover Letter	311

Allegion General Terms and Conditions of Sale and Service

1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by which Company will quote and sell Deliverables to Customer; (b) The terms "purchase order" or "order" for the purposes of this Agreement include the term "request for quotation," as appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions set forth in any purchase order issued by Customer; (d) No reference herein to Customer's purchase order will in any way incorporate different or additional terms and conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER'S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER'S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part, for any reason.

2. ORDERS.

• a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver to Company a purchase order. All such purchase orders must (i) be in a written format acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include Customer's account number, invoice address, ship to address, shipping method, shipper's letter of instruction for international shipments, part number, pricing, and designated contact information, (v) include, if applicable, any special configuration ID numbers, necessary programming information, special factory instructions, and requested specifications regarding a particular finish, handing, design, backset, or strike, (vi) reference any applicable pricing discounts under an ongoing buying program or based on a written quote from Company, along with the applicable buying program number or quotation number, and (vii) not combine buying program and quoted product on the same order.
• b. Minimum Orders. In the event the order value does not meet any required minimum net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a requirement for one order shall not constitute a waiver of the requirement for any future orders.
• c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of each purchase order issued in accordance with this Agreement, and (ii) notify Customer whether Company accepts or rejects the purchase order. If Company fails to accept or reject a purchase order within a reasonable time period, such failure to respond will be deemed a rejection of the entire order. Orders that combine buying program and quoted product on the same order will be routed back to your local RSO office in order to review subject purchase order.
• d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order changes and cancellations are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided herein, Customer acknowledges that (i) requesting a Change Order may cause a delay in the scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii) Orders may not be changed after 48 hours of Company's order acknowledgment; (iii) After 48 hours of Company's order acknowledgment, all changes to an accepted purchase order will be subject to a Change Order charge of 25% of the net Deliverable value, plus the cost of labor and fabrication or raw material that Company incurred prior to the receipt of the Change Order from Customer, or that may be required due to the Change Order; (iv) the requested change may result in additional charges for labor, fabrication, and raw material, and (v) if Customer cancels an order or portion of an order that includes Deliverables that have been manufactured and prepped for shipping, a 45% restocking fee will apply. Notwithstanding the foregoing, Customer cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom or nonstandard items once they have been placed. All cancelled orders for a Non Recurring Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to a cancellation charge of 100% of the acknowledged price.
• e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, including discounts, on an individual basis.
• f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested by Customer within 24 hours of Company's order acknowledgment if the order has not shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested by Customer if the order has not shipped and if the request is made to Company within 48 hours of Company's order acknowledgment. Return Material Authorization (RMA) for Deliverables must be processed through Fast Track Customer Service.
• g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without penalty only if made within 48 hours of Company's order acknowledgment, and provided that the order has not shipped. Some exceptions do apply – please consult the factory. Changes are not allowed on Rapid Program orders after the order has been entered and acknowledged. After 48 hours of Company's order acknowledgment, all changes or cancellations are subject to a charge of 25% of the order. Unless otherwise specified by Company in writing, any changes to orders acknowledged by Company that affect the delivery date will be deemed a new order and will require acknowledgement by Company as provided in this Section. Additional products, features, terms and conditions regarding the Rapid Program are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

3. PRICES, INVOICES AND PAYMENT.

• a. Prices. The prices in Company's Price Book are subject to change at any time, without notice to Customer. Company may charge Customer additional amounts if Customer requests special packing, marking, shipment, product modification, or engineering services. Oral prices specified by Company are null and void. Quote numbers must be referenced on Customer's purchase order in order for the Company's quoted pricing to apply. Orders that do not reference a quote number will receive buy program pricing or book net pricing. Quoted prices are for those specific products quoted for a specified job, and are subject to the Price Book in effect at the time Company receives the order.
• b. Taxes. Prices do not include any present or future federal, state or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith. Any taxes, charges, or duties imposed by any governmental authority on the sale of Deliverables will be paid by Customer, in addition to the selling price specified by Company. Credits for U.S. sales tax applied to invoices will only be granted if valid exemption documentation is provided within 30-days of the invoice date and a case is initiated by customer service. Exemption documentation may be emailed to sales.tax.certificates@allegion.com, this e-mail address cannot be used to request a credit for sales tax charged all such requests must be made with customer service. All certificates sent to the e-mail address must include the following information: (1) Customer account number(s); (2) Customer name; and (3) Allegion brand(s) the certificate should be applied to.

c. Payment Terms. Company will deliver to Customer an invoice with each shipment of Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice date (subject to any early pay discounts that may be offered to Customer by Company in its sole discretion). Customer will make all payments in United States dollars. Past due invoices will be subject to a late payment service charge of 1.5% per month on any overdue unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law, whichever is less. Customer shall reimburse Company for all costs of collection, including, without limitation, reasonable attorneys' fees, for any overdue amount owed by Customer to Company, and such collection costs shall also be subject to interest charges.

4. QUOTATIONS.

a. Project Quotations. Project or new construction quotes are restricted to the specific project quoted for the quantities, finishes, and series of Deliverables referenced on the quote. Company reserves the right to require proof of sale of Company products for any quoted project.

• b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the following: i) Stocking of the Customer's shelves for small, quick-turn, discretionary projects, or ii) Sale to a general contractor or installer for new construction. Stock quotations may not be used for any project containing any Company no-substitution, specified products. Deliverables purchased under Stock Quotations cannot be redistributed to other Customer branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over the counter to any walk in trade.
• c. General. All quotes are subject to this Agreement, unless otherwise specified by Company, and are subject to change at any time prior to Company's acceptance of a purchase order referencing the applicable quote number. Company, its representatives and employees reserve the right, in their sole discretion and for any reason, to refuse a Customer's request to quote a price other than the standard list price, regardless of whether Company or its representatives or employees have previously quoted discounted prices to the Customer on some or all of its orders. Customer's failure to comply with this Section 4 will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase orders and/or Customer's ability to distribute Company's products.
• 5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase money security interest and lien on any and all of Customer's rights, title and interest in each Deliverable sold by Company to Customer, wherever located, until the invoice for the applicable Deliverable(s) is paid in full, including any late charges and costs of collection. Customer authorizes Company to, and will assist Company in, taking all necessary steps to perfect and maintain Company's interest in such Deliverables.
• 6. CREDIT TERMS. . Unless Customer pre-pays all of its purchase orders in advance, its purchase orders will be subject to the credit limit and other terms of credit ("Credit Terms") set forth in Company's credit application, which Credit Terms Customer acknowledges are subject to change by Company at any time. Company reserves the right to request payment in advance of shipment or any order or to request adequate assurances for Customer's payment of an order and may withhold or stop shipment, without any liability to Company, until Customer submits payment or adequate assurance of payment.
• 7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company products in support of Company-written specifications and will maintain sufficient inventory to adequately support End Users, installers, and/or general contractors' needs. Company may implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure to comply with such program(s) will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase order and/or Customer's ability to distribute Company's products. Customer shall, at its own expense, gain and maintain sufficient knowledge of the industry and products competitive with Deliverables so as to be able to (a) explain in detail to End Users, installers, and/or general contractors the differences between the Deliverables and competing products, (b) ensure that an adequate number of trained, capable and qualified technical personnel with sufficient knowledge of the Deliverables and who have obtained all necessary licenses and permits are available to assist End Users, installers, and/or general contractors, and (c) respond to such End Users, installers, and/or general contractors with respect to the general operation and use of the Deliverables including, but not limited to, (1) acting as a liaison between the End Users, installers and/or general contractors and Company in matters requiring Company participation, (2) providing general product information and configuration support on standard protocols and features, (3) collecting relevant technical problem identification information, and (4) posting and distributing any warranty information concerning the Products in accordance with Company's instructions. Customer is responsible for all service and support resulting from the re-sale of any Deliverable to End-Users, installers and/ or general contractors, examples of which may include, but are not limited to, support activities such as installation, initialization, software set-up, training, trouble-shooting, technical support and field service. In the event Customer is unwilling or unable to perform said support activities, Company reserves the right to recover from Customer any and all expenses incurred by Company to resolve the afore-mentioned End-User, installer and/or general contractor issues. Technical product training is recommended for Customer in order to fully service and support Deliverables purchased from Company that are resold to End-Users, installers and/or general contractors.
• 8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase order or other contract with Company, Company shall have the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to defer further shipments under that or any other purchase order until such default is corrected and to declare all outstanding bills of Customer to be immediately due and payable.

9. INSPECTION AND DELIVERY.

a. Inspection. Customer will inspect all Deliverables immediately after receiving them. Customer will be deemed to have accepted the Deliverables unless Customer notifies Company in writing of any nonconformance within 10 days of delivery and provides Company written evidence reasonably documenting that nonconformance. Inspection of Deliverables at Company's facility is not permitted.

b. Delivery. Delivery schedules for Deliverables are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Delivery schedules for services are based upon Company's prompt receipt of, and prompt access to, Customer's equipment and all information necessary to complete the services. In no event will any delivery date be construed as falling within the meaning of "time is of the essence." Partial delivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery shall constitute a separate sale, and payment shall be separately made when due. If any part of a delivery hereunder is not delivered by Company in accordance with Customer's purchase order, this Agreement shall not be affected thereby.

10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer is located in the United States, all Deliverables will be sold "Uniform Commercial Code, FOB Origin, Company's factory"; and (ii) where the Customer is located outside of the United States, all Products will be sold "Ex-works, Company's factory (Incoterms 2010)." In either instance, title and risk of loss will pass to Customer upon delivery to the carrier at Company's factory, provided, however, as set forth herein, Company shall retain a security interest in the Deliverables until full payment has been made therefore, and Customer agrees, upon request, to do all things and acts necessary to protect Company's interest by adequately insuring the Deliverables against loss or damage from any cause and to have Company named as an additional insured. Customer will promptly provide Company with a copy of the relevant certificate of insurance upon Company's request.

11. SHIPPING.

• a. Freight Charges. Company will ship all Deliverables in accordance with Company's freight shipment guidelines, which are set forth on the My Allegion Portal ("Freight Shipping Guidelines"), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN.
• b. Rush Charges. Expedited order options are available as set forth in Company's Freight Shipping Guidelines.
• c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its standard procedures for shipment, unless the parties agree, in writing, that Company will comply with any special instructions provided by Customer. Special instructions may result in an increased price.
• d. International Shipments. For all international orders, a Shipper's letter of instruction must be submitted in writing with the order. Failure to do so will result in the order being rejected. Complete adherence to this order requirement will be strictly enforced. Company will not be held liable for any charges resulting from delays due to lack of complete required information being supplied.
• e. Once received by the Company, a purchase order cannot be combined with any other order to increase average order size as it relates to Company's Freight Shipping Guidelines. However, for orders placed under Company's FastTrack 24 Hour/5 Day Program (available for Schlage, Von Duprin, LCN and Glynn-Johnson products); ii) FastTrack 24 Hour/3 Day Program (available for Ives products); or ProExpress (available for specific product lines stated in the ProExpress price book for Falcon, Ives, Glynn Johnson, LCN, Schlage and Von Duprin products), the applicable brands or product categories may, subject to certain order requirements identified by Company, be combined on a single order to increase average order size used in Company's Freight Shipping Guidelines.
• 12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days from the date of delivery; (iii) All claims for damage to Deliverables (while in the care, custody, and control of Company) must be submitted within thirty (30) days from the date of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/or control of a carrier will be the responsibility of Customer, unless otherwise agreed by the parties.
• 13. PRODUCT CHANGES. Company's product policy is one of ongoing update and revision, and accordingly, Company reserves the right to change, without notice, the design of, or the process of manufacturing, the Deliverables covered by this Agreement.
• 14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable in any manner contrary to the manner in which the Deliverable is intended to be used; and/or (ii) not to modify the design of any Deliverable for use with another product without the prior written consent of Company.
• 15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables that are correctly furnished by Company per the purchase order may not be returned unless Customer receives written authorization from Company. If returns are authorized by Company, a return merchandise authorization ("RMA") number must be provided by Company. Deliverables identified under such RMA must be returned to Company within 90 days of issuance of the RMA. Such RMA number and any accompanying RMA documents, the original invoice number, and a written explanation for the return must be included with the returned Deliverables in order for Company to inspect and approve a credit for the return. For warranty returns , a credit in the amount of the original purchase price will only be issued if, after Company's receipt and inspection of the returned Deliverables, Company confirms, in its sole discretion, the defect is valid and approves the return. For non-warranty returns/convenience returns , in the event Company approves such a return, in its sole discretion, the following shall apply: (a) the total amount of Deliverables requested to be returned shall be a minimum of $250.00; (b) a credit will be made to Customer's account in the amount of the original purchase price less freight and a handling charge of 45% of the net material on the original invoice; and (c) only Deliverables that are new, current, standard, non-obsolete, non-specially manufactured, unused, in their original condition as at the time of sale by Company to Customer, in their original packaging and in Customer's inventory less than 180 days from the date of shipment by the Company, and not ordered as part of a master key solution may be considered by Company for return. Such credit will only be issued if, after Company's receipt and inspection of Deliverables, Company approves the return. The amount of final credit will be determined upon receipt at the factory and following Company's inspection and analysis of the condition of the returned material. Company retains the right to deny credit to anyone for any reason.

16. CONFIDENTIAL INFORMATION.

• a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of the Company except for the purpose of performing its obligations under this Agreement or exercising the rights granted herein (the "Purpose"). Customer shall protect Confidential Information of the Company from disclosure and unauthorized use in the same manner that it protects its own Confidential Information, but in no event shall such standard of care be less than reasonable care. Customer may disclose Confidential Information of the Company only to its employees who require such information for the Purpose and who are subject to confidentiality obligations at least as protective as those set forth herein.
• b. Proprietary Information and Advice. (a) All designs, data, and specifications provided by Company are proprietary and may not be disclosed or reused by Customer without the prior written consent of Company; (b) Company assumes no obligation or liability for any advice given by Company, the results obtained, or damages incurred as a result of such advice, and all such advice is given and accepted at Customer's risk.
• c. Return. Upon the termination or expiration of a purchase order or this Agreement or upon the request of the Company, the Customer agrees to end all further use of, to immediately return to the Company the original version of, and to delete or destroy all copies of, any and all Confidential Information of the Company.

17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a) use Company's name in any form of publicity; or (b) use, create, register or market, directly or indirectly, in whole or in part, Company's names, logos, brands, or any other trademarks, or names that are now or may hereafter be owned by Company, as part of Customer's corporate or business name, as part of an internet domain name, uniform resource locator (URL), or in any way connected with Customer's business, trade address or other designations. Upon termination of this Agreement or upon the request of company for any reason, any use of Company's trademarks or names will be immediately discontinued.

18. LIMITED WARRANTY.

COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN COMPANY'S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTS EACH APPLICABLE PURCHASE ORDER ("LIMITED WARRANTY"). THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A HARD COPY OF THIS WARRANTY UPON CUSTOMER'S WRITTEN REQUEST. IN THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OF THE DELIVERABLES. COMPANY'S SOLE OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY'S OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE.

a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A) are not the proper size for the application; (B) are not installed in accordance with Company's published installation instructions; (C) are installed with improper or incorrect parts and/or are used for purposes for which they are not designed or intended; (D) have been repaired or altered without the Company's prior written consent; (E) have been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored, installed, maintained or operated; (G) have been used in violation of written instructions provided by Company to Customer; (H) have been subjected to improper temperature, humidity, or other environmental conditions, or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited Warranty do not apply to any defects or issues with the design or performance of equipment or products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection or construction of any goods. Company is not responsible for loss or damage resulting from use of Deliverables in conjunction with parts or systems not manufactured by Company. Accessories or products furnished by the Company, but manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed to Customer.

b. Services. Company warrants that its services will be free from defects in material and workmanship for a period of 12 months from the date of completion of the particular items of service. Company's sole obligation under this service warranty is limited to repair or reperformance, at its option of the service, provided however, if repair or reperformance is either impractical or impossible, the Company will refund to Customer that portion of the price paid to Company for any defective service, provided written notice of the defect or nonconformance is provided by Customer within 30 days of discovery of the nonconformance.

c. Notification. Customer agrees to immediately notify Company in writing if any claim is made against Customer for any damages caused by any modules, parts, products, service or other Deliverables which may be the direct result of any defect in the manufacture of such aforementioned products. Customer agrees to cooperate with Company and its counsel in the defense of such claim and Customer agrees not to settle such claim without Company's written consent. If Customer fails to notify Company of such claim or fails to cooperate in such defense as aforesaid, then Company shall be discharged from any obligations under this Section and shall have no further liability to Customer.

d. Exceptions. The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables or other manufacturer's products; (ii) shipping and freight expenses required to return Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in Company's material (products only) or workmanship.

19. LIMITATION OF REMEDIES.

CUSTOMER'S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A) SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY'S OPTION. IN NO EVENT WILL THE COMPANY'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY'S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.

20. INDEMNIFICATION AND LIMITATION OF LIABILITY . a. Customer shall indemnify, defend and hold Company, and its officers, directors, employees, customers, Affiliates, suppliers, users and agents, (collectively the "Indemnitees") harmless from and against any and all damages, claims, losses, expenses, costs, obligations, liabilities, including without limiting the generality of the foregoing, liabilities for court costs and attorneys' fees, suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss to any person, or injury to any property (collectively, "Damages"), received or sustained by any person(s) or property, arising out of, occasioned by, attributable or related to i) any breach of any representation or warranty made by Customer, its officers, directors, employees, affiliates, users, agents, representatives or customers to Company or any third party, (ii) any failure by

Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim by any third party relating in any way to the obligations of Customer and/or the Deliverables sold by Company to Customer hereunder. Customer shall not consummate any settlement of any indemnified claim without the Indemnitees' prior written consent. Customer's obligation to indemnify Indemnitees will continue in full force and effect notwithstanding the termination or expiration of any order under this Agreement. In any claim against an Indemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly employed by any of them or anyone for whose acts they may be liable, the indemnification obligations set forth in this Section shall not be limited in any way by or for Customer or any subcontractor under any applicable worker's compensation act, disability or other employee benefit act, or insurance coverage. This provision shall survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY'S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER'S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty to the Customer that the Deliverables shall not infringe any intellectual property rights including, without limitations, claims arising from patent, copyright, trademark, trade secret, or other intellectual property infringement. Customer agrees to hold Company harmless from and defend the Company against any such claim of intellectual property infringement, including any Damages resulting from that claim, the cost of complying with any preliminary or permanent injunction, and all other costs of defense (including the attorneys' fees and costs), in connection with the foregoing.

• c) To the extent that applicable law does not permit any limitations set out in this Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or willful misconduct. The limitations of remedy and liability herein shall not be interpreted to affect Company's obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this Agreement. Further, the limitations of remedy and liability herein shall not be interpreted to limit Company's or Customer's right, if permitted by applicable law, to assert a claim for contribution among joint tortfeasors in connection with a claim by a person who is not a party to this Agreement.
• 21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standards are tested and performed by third-party independent laboratories. Any field modification or alteration of certified Deliverables will void certification and Company is not liable to Customer to certify any modified or altered Deliverable.
• 22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

23. CONSUMER PRODUCTS WITH RESPECT TO "CONSUMER PRODUCTS" AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT ("MMWA"), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C) SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR LOCATION TO LOCATION.

• 24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its obligations hereunder will be excused to the extent that it is caused by an event or occurrence beyond Company's control such as, by way of example and not by way of limitation, acts of God, acts by any governmental authority (whether valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and slowdowns) at Company's facility, its source plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery date will be extended for a time equal to that of the delay and the schedule for Company's performance will be deemed adjusted to that effect.
• 25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the attachments, exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entire agreement between Company and Customer with respect to the matters contained herein and supersede all previous communications, representations, or agreements, either oral or written between Company and Customer. No agreement or understanding varying or expanding this Agreement will be binding upon either party unless it is in writing and signed by a duly authorized representative of each party hereto.
• 26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any agreement, or any part of an agreement or the various documents (including, but not limited to, electronic documents) between Company and Customer, unless the parties agree otherwise in writing, the various components of the agreements shall be given the following precedence (in descending order of precedence): a) any master agreement or long term agreement between Company and Customer; b) any specific terms, conditions and/or warranties of the individual products or Deliverables; c) the terms and conditions of this Agreement, and d) any purchase order.
• 27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT. Customer shall furnish Company with statements evidencing Customer's financial condition as Company may, from time to time, reasonably request, and shall notify Company immediately of any and all events that may have a material adverse effect on Customer's business or financial

condition. If Company determines, in its sole discretion, that Customer's financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to Company's other rights, Company may without liability or penalty, take any of the following actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to Customer; or (iv) any combination of the above.

Company may immediately terminate an order from Customer by giving written notice to Customer in the event of the happening of any of the following or any other comparable event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an assignment for the benefit of creditors by the Customer, all of which will allow Company to demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to trade; (vi) Company determines that Customer does not meet or no longer meets the credit requirements of Company or Customer's credit account is closed; (vii) any Customer violation of law, specifically including, without limitation, those laws set forth in this Agreement.

In the event of termination in accordance with this section, Company will not be obligated to accept any existing or additional orders from Customer and Company will be released from its obligation to deliver under orders accepted prior to such termination. The rejection or termination of any order by Company will not entitle Customer to any termination or severance compensation, or to any payment in respect to any goodwill established by Customer, or render Company liable for damages on account of the loss of prospective profits, or on account of any loss, expenditure, investment or obligation incurred or made by Customer.

No action taken under this Section 27 by Company (nor any failure of Company to act under this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer's obligations, including the obligation of Customer to make payments as required under this Agreement. Upon termination of any order, all amounts owed by Customer to Company will become immediately due and payable, whether or not otherwise then due or payable.

• 28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit risks with respect to, and for collecting payment for, all Deliverables sold to third parties (including End Users, installers, and/or general contractors) whether or not Customer has made full payment to Company for such Deliverables. The inability of Customer to collect payment for any Deliverable shall not affect Customer's obligation to pay Company for any Deliverable.
• 29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this Agreement shall be governed by and construed according to the laws of the State of Indiana (excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations Convention on the International Sale of Goods. Any disputes or claims shall be instituted and maintained in the courts of the State of Indiana. Customer consents to the exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any action arising from or relating to this Agreement. Customer agrees to pay for all expenses (including, but not limited to, collection costs, court costs and attorneys' fees) incurred by Company in enforcing the obligations of Customer under this Agreement.
• 30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document creates an employment, partnership, joint venture, or agency relationship between Company and Customer, including that of franchisee/franchisor. No party will have any power or authority to enter into any commitment on behalf of or otherwise bind the any other party on any matter. No employee of Customer will be deemed to be an employee of Company. If any provision of this Agreement is deemed to create a franchise relationship or business opportunity between the Parties, then Company may terminate any purchase order or this Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to effect the original intent of the Parties as closely as possible in a mutually acceptable manner in order that the transactions contemplated hereby are consummated as a reseller agreement and not a franchise or business opportunity agreement.
• 31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts which become payable to Company under this Agreement or otherwise. Company will not accept responsibility for backcharges for the cost of material or labor by Customer or any third party.
• 32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties expressly agree to electronic transactions and acknowledge that documents they sign electronically will bind them to the same extent as a paper signature. Customer represents and warrants to Company that only employees authorized to bind Customer legally shall electronically sign any document under this Agreement. Customer shall comply with any method of electronic communication/payment processing specified by Company, including electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases, electronic signature, and electronic communication systems, including, without limitation, the use of electronic data interchange ("EDI") portals. Notwithstanding the foregoing, e-mails, even those containing a signature block of one of Company's representatives, shall not constitute a signed writing.

33. COMPLIANCE WITH APPLICABLE LAWS.

• a. General. Company and Customer will comply with all applicable federal, state and municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables, including but not limited to full compliance with any applicable provisions of The Health Insurance Portability and Accountability Act. Where the Customer is located outside the United States, or where the customer intends to ship the product outside the United States, the Customer shall be responsible for compliance with all U.S. export laws, and for filing all U.S. Electronic Export Information, as applicable.
• b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and regulations in performing its duties under this Agreement; (ii) it does not and shall not engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment) to (a) any government official or employee of any government; (b) any official or employee of any department, agency, or instrumentality of a government; (c) any employee of any corporation or entity owned or controlled by a government; (d) any family member of such officials or employees; (e) any political party, party official, or political candidate; or (f) any other persons, owners, officers, directors, employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retaining business (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reduction of taxes or

to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the Company's Code of Conduct for Business Partners as set forth on the Allegion customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE.

c. The Customer shall indemnify and hold the Company harmless from any claim, demand, expense or cost arising from any breach of this Article.

d. The Customer shall permit the Company to conduct an audit or review of the Customer's financial books and records and business operations at such other times that the Company considers it necessary to confirm compliance with this provision. Such audit may be conducted by representatives of the Company or, at the Company's sole discretion, by a certified public accounting firm selected by the Company. The Customer shall cooperate with any inquiries from the Company's Ethics & Compliance Group.

e. A violation of this provision constitutes a material breach of this Agreement and the Company may terminate any purchase order or this Agreement immediately, with no opportunity to cure, in accordance with Section 27 of this Agreement.

f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible for obtaining or maintaining any permits for the performance of services or the verification or compliance with any code requirements relative to the performance of services, (ii) to the extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S. Government, Company's obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government in connection with such approval, and (iii) in the event the Deliverables are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and its suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers.

g. No Inducements. Each party represents to each other that neither it nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give or will give or offer to give, any sum of money or other material consideration to any person, directly or indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or other governmental permissions to enter into this Agreement or perform obligations

hereunder. h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as amended by Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR §§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and Executive Order 13496.

i. Ethical Business Conduct. Customer shall adopt and comply with Company's Business Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants to Company that: (a) it has the right, power, and authority to enter into this Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and to its respective Content and Marks for use within the scope of this Agreement, including the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws, rules, and regulations in effect that are applicable to its performance under this Agreement, including obtaining all such approvals and/or permits as may be required hereunder.

35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based on the representations contained herein for its own purposes and not for the benefit of any third party.

36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under this Agreement shall be in writing and delivered in person, or sent by receipted courier, express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is intended, at the addresses set forth in this Agreement. Either party may change its address for notice by giving written notice to the other party. Any notice or other communication shall be deemed given no later than the date actually received. Notice by courier, express mail, certified mail, or registered mail shall be deemed given on the date it is officially recorded as delivered and, in the absence of such record of delivery, it shall be rebuttably presumed to have been delivered on the third Business Day after it was deposited. Notices sent by e-mail require tangible confirmation of receipt from addressee.

37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent of Company. Company may assign its rights and delegate its duties under this Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the event of a spinoff, merger, business combination, consolidation or sale of all, or substantially all, of its assets or business that are related to this Agreement. The rights and duties in this Agreement shall bind and inure to the benefit of any such assignee.

38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in good faith to arrive at an alternative arrangement approximating the original business objective of the parties. The remaining terms and conditions of this Agreement will remain in effect.

39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by the other party of any provision of this Agreement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision of this Agreement constitute a waiver of any succeeding breach of the same or any other provision.

40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of the other party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder; (b) The rights and remedies herein reserved to Company are cumulative and additional to any other rights and remedies provided at law or equity; (c) The official text of this Agreement is in the English language. If this Agreement is translated into another language, the English text will govern any question with respect to interpretation;

(d) The headings in this Agreement are for convenience of reference only and do not affect the meaning of this Agreement in any manner.

DEFINITIONS.

Capitalized terms have the meanings set forth in this Section, or in the Section in which they first appear in this Agreement.

"Agreement" means these Allegion Terms and Conditions of Sale and Service, together with any applicable Country Supplement or Region Supplement provided by Company, and all of the documents referenced herein or therein.

"Affiliate" means any Person that directly or indirectly, through one or more intermediaries, controls, is controlled by, or is under common control with, the Company. The term "control" (including the terms "controlled by" and "under common control with") means the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of a Person, whether through the ownership of voting securities, by contract or otherwise. "Business Day" means any day except Saturday, Sunday or any other day on which commercial banks located in the United States are authorized or required by Law to be closed for business. "Company" means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling products that are part of the Allegion product portfolio. Schlage Lock Company and/or its subsidiary or affiliates will be severally but not jointly liable under the Agreement.

"Company Marks" refers to the Marks of Company.

"Confidential Information" shall mean any and all information provided by either party to the other party pertaining to the disclosing party's business. Confidential Information shall include, but not be limited to, any bitting lists, formulae for products, manufacturing processes, production techniques, packaging processes, methods, research materials, ideas, marketing plans and related materials, quality standards, test results and data, apparatus, engineering drawings, contract documents, computer software, hardware, or firmware, business activities information such as financial information, reports, projections, books and records, customer and supplier information, and operations, customer and supplier lists and data, specifications, know how, and other Proprietary Information or Trade Secrets (as defined herein) that either party may furnish to the other party. Confidential Information shall not include information that: (a) is or becomes publicly known if such public knowledge or disclosure is not the result of any act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already known to the Receiving Party without utilizing the Confidential Information; (c) is information disclosed to the Receiving Party by a third party which is not to the Receiving Party's knowledge, after inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving Party without the use of Confidential Information. The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach. Confidential Information may be furnished in any tangible or intangible form including, but not limited to, writings, drawings, computer and other electronic media, logic diagrams, component specifications, graphs, prototypes, samples, or verbal communications and regardless of whether such information is marked or designated as "confidential." For the avoidance of doubt, all information, knowledge or data disclosed by Company to Customer, regardless of whether disclosed in written, tangible, oral, visual or other form, including, without limitation, sample products, equipment, software, or other objects or material, provided by Company to Customer, and all information, knowledge or data which was obtained by Customer from visits to Company's facilities, shall be considered "Confidential Information" under this Agreement.

"Content" means all information (including without limitation any text, music, sound, photographs, video, graphics, data or software), in any medium, on a particular Company Web page or Website or in Marketing Materials.

"Customer" means the purchaser of Deliverables from Company.

"Deliverables" means any good or service or both purchased by Customer from Company under these General Terms and Conditions of Sale and Service.

"End Users" means the purchaser that (a) has acquired a Deliverable from Customer for (i) its own and its Affiliate's/Affiliates' internal use and not for resale, remarketing or distribution or (ii) incorporation into its own products and (b) is an individual or entity, other than any federal, state or local agency, office or division.

"IP" means all intellectual property and industrial property rights comprising or relating to/ of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not Trademarks, registered by any authorized private registrar or Governmental Authority, web addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and design registrations, whether or not copyrightable, including copyrights and copyrightable works, software and firmware, application programming interfaces, architecture, files, records, schematics, data, data files, and databases and other specifications and documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights, interests and protections that are associated with, equivalent or similar to, or required for the exercise of, any of the foregoing, however arising, in each case whether registered or unregistered and including all registrations and applications for, and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world. "Marketing Materials" means all marketing brochures, buckslips, pamphlets, emails, text, call scripts or other material, whether in printed format, audio or audiovisual format, or in any other format, that contain any (i) Content relating to the Company Deliverables or (ii) Company Marks.

"Marks" means collectively the domain names, trademarks, trade names, service marks, trade dress, logos, and the like used or provided by either party for use in connection with this Agreement. "Patents" means all patents (including all reissues, divisionals, provisionals, continuations and

continuations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent applications, and other patent rights and any other Governmental Authority-issued indicia of invention ownership (including inventor's certificates, petty patents and patent utility models). "Person" means a person or entity.

"Price Books" mean Company's current Price Book in effect for the applicable Deliverable being purchased by Customer.

"Trade Secrets" means and includes business or technical information of either party, including processes, formulas, devices, techniques, compilations and other material that a party attempts to maintain in secret and that derive commercial value for such party from not being generally known to the public or readily ascertainable through independent development or reverse engineering.

Additional Terms & Conditions

Commercial

The following specific product terms and conditions are applicable only to the extent provided herein. All other terms and conditions contained in the General Terms and Conditions of Sale and Service provided in this Price Book will govern the sale of products identified in this Price Book.

Prices:

This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice. All prices may be subject to discount.

Minimum Order Size for Channel Discount:

All orders less than $500.00 list shall be discounted at book net.

Due to Schlage error: Due to Customer error:

• Claims for shortages and/or incorrectly filled orders must be filed with
• Customer Service within 30-days of receipt of material. Incorrect order acknowledgments must be changed by emailing request to Customer Care territory email box upon receipt of acknowledgment. Refer to inside cover of this book.
• Invoice adjustments must be faxed to Credit Adjustments @ (317) 810-3048 within 30-days of receipt of invoice.
• Returned goods will not be accepted without prior written approval from Schlage. Credit will be based upon the Return Material Authorization (RMA) issued by Customer Service or the Allegion Consultant and final acceptance by Schlage. Returns must be prominently marked with the RMA number and follow return guidelines on the RMA form.
• Product considered being defective after review by the Allegion Consultant must be returned to the Schlage Lock Company facility in Security, Colorado accompanied by an RMA. Replacement orders for defective product will be entered by Customer Service at the time of notification.

Claims and Returns: Claims and Returns:

• It is the policy of the Schlage Lock Company to not accept returns of any materials that are correctly furnished as per the dealer's purchase order.
• Return of product due to customer order error or accommodation must be pre-arranged with the Allegion Consultant and approved by Business Unit Manager.
• Returns are subject to a minimum restocking charge of 35% for unopened cases.
• Materials are not returnable.
• Product must be received in original factory condition and certified as such by Schlage Receiving.

Charge-backs will not be allowed.

Additional Terms & Conditions

Commercial

Delivery: Claims and Returns: For the following: Expect this delivery: Non-Master Keyed orders Factory items will individually be assigned ship dates based on current lead times. Master Keyed orders or Non-Master Keyed orders prominently marked on the order to "Ship Complete" The entire order will be assigned ship dates grouped by factory location. Items with longest current lead times determine ship date for other items from that location.

All orders will be acknowledged with scheduled ship dates. Specific scheduled ship dates are not guaranteed by Schlage because of the nature of product, labor, availability of product or manufacturing conditions that might be beyond our control. Schlage will not be liable for back charges incurred based on availability of product in accordance with acknowledged ship dates. Selected Products are available to spe cific channels of distribution for 1 and 5-day delivery through the Allegion FastTrack Program. The Allegion FastTrack Program is subject to separate terms and conditions.

Order Changes or Cancellations:

		Type of Product
Type of Change	• Primus® Keys	Normal Factory Lead Time items	6 Extended Factory Lead Time items
1. Change to: – Product, creating a different SKU number – Keying	Not Accepted	• OK within first 2-days from receipt of order. • If after 2-days, item must be deleted from order (see 3, 25% handling charge will apply) and entered as a new order (see 2).	• OK within first 10-days from receipt of order. • If after 10-days, item must be deleted from order (see 3, 50% handling charge will apply) and entered as a new order (see 2).
2. Change to: – Increase quantity of existing item(s) – Add new item(s)	Not Accepted	• New order with normal lead-time must be generated for additions. Same terms & conditions will be applied if requested so long as the original order has not been shipped. • Additions received after the original order ships must be entered as a new order and will stand-alone for lead-time and terms & conditions.
3. Change to: – Delete item(s) – Reduce quantity of existing item(s) – Cancel order	Not Accepted	• OK within first 2-days from receipt of order. • If after 2-days, subject o handling charge of 25% of the net price of the deleted item(s).**	• OK within first 10-days from receipt of order. • If after 10-days, subject o handling charge of 50% of the net price of the deleted item(s).**

^* Includes any change to key symbol, door identification and/or cylinder pinning.

Notes: 1) Change orders must be emailed to your Customer Care territory email box. Please state change order request in subject line. For questions call (877) 671-7011.

• 2) Customer Care will acknowledge receipt of change orders and action taken.
• 3) Change orders resulting in handling charges require customer review prior to change being made.

^** Handling charges are billed on the original order.

WARRANTY Terms & Conditions

Schlage Electromagnetic Locks

Limited Lifetime Warranty:

Magnetic Coil Assembly. Schlage warrants only to the End User of electromagnetic locks that the magnetic coil assembly of the electromagnetic locks will be free from defects in material and workmanship for the lifetime of such electromagnetic lock.

Limited 12 Month or 18 Month Warranty:

Electronic Module. Schlage warrants only to the End User of electromagnetic locks that the electronic module of the electromagnetic locks will be free from defects in material and workmanship for a period of 12 months from the date of shipment of the electromagnetic locks from an authorized seller to the End User or a period of 18 months from the date of shipment of such electromagnetic locks from Schlage to an authorized seller, whichever period is shorter.

Limitations:

Schlage's sole obligation under this warranty is limited to repairing and replacing, at its option, the defective electromagnetic locks. If Schlage chooses to replace a defective electromagnetic lock as provided herein, Schlage may replace the defective electromagnetic lock with an equal or upgraded electromagnetic lock, at its option.

NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO THE ELECTROMAGNETIC LOCKS INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHLAGE DOES NOT AUTHORIZE ANY PERSON TO CREATE FOR IT ANY OBLIGATION OR LIABILITY IN CONNECTION WITH ELECTROMAGNETIC LOCKS.

This warranty is exclusive and limited to the End User of the electromagnetic locks, and terminates upon the sale or transfer of the electromagnetic locks or the structure for which the electromagnetic locks are attached.

"End User" is defined in this limited warranty as the initial user of the products.

Exclusions to Warranty:

The provisions of this limited warranty do not apply to electromagnetic locks: (i) used for purposes for which they are not designed or intended; (ii) which have been repaired or altered without Schlage's prior written consent; (iii) which have been subjected to misuse, abuse, negligence, or accident; (iv) which have been improperly stored, installed, maintained, or operated; (v) which have been used in violation of written instructions provided by Schlage to an authorized seller and/or End User; (vi) which have been subjected to improper temperature, humidity, or other environmental conditions; (vii) which have been affected by normal wear and tear; or (viii) which, based on Schlage's or authorized seller's examination, do not disclose to Schlage's or an authorized seller's satisfaction nonconformance to the warranty.

The following costs and expenses are not covered by the provisions of this limited warranty: (i) labor costs for the removal and reinstallation of electromagnetic locks; (ii) shipping and freight expenses required to return electromagnetic locks to Schlage or an authorized seller; (iii) normal maintenance; and (iv) economic losses.

THE PROVISIONS OF THIS LIMITED WARRANTY ARE NOT APPLICABLE TO ANYTHING OTHER THAN DEFECTS IN SCHLAGE'S MATERIAL OR WORKMANSHIP.

End User's Remedies:

END USER'S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF ELECTROMAGNETIC LOCKS THAT DO NOT CONFORM TO THIS AGREEMENT WILL BE TO SECURE REPAIR OR REPLACEMENT OF THE ELECTROMAGNETIC LOCKS, AT SCHLAGE'S OPTION. IN NO EVENT WILL SCHLAGE'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE NON-CONFORMING ELECTROMAGNETIC LOCKS.

Limitation of Liability:

IN NO EVENT WILL SCHLAGE BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE ELECTROMAGNETIC LOCKS, LOSS OF PROFIT, LOSS OF REVENUE, INTEREST, LOST GOODWILL, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OR OPERATION, OR CLAIMS OF END USERS, WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Statute of Limitations:

NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS AGREEMENT BY SCHLAGE MAY BE BROUGHT BY END USER MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

Consumer Products:

With respect to "customer products" as defined under the Magnuson-Moss Warranty Act ("MMWA"), the following statements are made. (a) Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to the End User. (b) This warranty gives the End User specific legal rights and the End User may also have other rights which vary from state to state.

WARRANTY

Limited Warranty - Networked Readers & Credentials

Limited Lifetime Warranty – Credentials

Schlage Lock Company, LLC (hereinafter referred to as "Company") extends a limited lifetime warranty to the original end-user purchaser ("Original Purchaser") of our Credential, against defects in materials and workmanship under normal use and service.

Limited Lifetime Warranty – Networked Readers

Company extends a limited lifetime warranty to the original end-user purchaser ("Original Purchaser") of our Networked Reader, against defects in materials and workmanship under normal use and service.

5-Year Limited Warranty – Networked Reader Keypads

Company extends a five year limited warranty on the Networked Reader Keypad, from the date of shipment, to the original purchaser ("Original Purchaser") of our Networked Reader, against defects in materials and workmanship under normal use and service.

1-Year Limited Warranty – Networked Magnetic Stripe Read Head

Company extends a one year limited warranty on the Networked Magnetic Stripe Read Head, from the date of installation (not to exceed two years from the date of shipment from the factory), to the original purchaser ("Original Purchaser") of our Networked Reader, against defects in materials and workmanship under normal use and service.

1-Year Limited Warranty – Magnetic Stripe Credentials

Company extends a one year limited warranty on our magnetic stripe credentials, from the date of shipment, to the original purchaser ("Original Purchaser") of our Magnetic Stripe Credential, against defects in materials and workmanship under normal use and service.

"Credential," "Networked Reader," "Networked Reader Keypad," and "Networked Magnetic Stripe Read Head" are collectively referred herein as "Product." "Credential" shall not include credentials made of only PVC material.

What Company Will Do:

If a defect arises and a valid claim is determined by Company sole obligation, at its option, is to either repair or replace the Product covered under this warranty with a new or remanufactured Product. The repair or replacement of the Product, as provided herein, is Original Purchaser's exclusive remedy.

Original Purchaser:

This limited warranty only applies to the Original Purchaser of the Products. It is non transferable and does not apply to any subsequent purchaser.

How to Submit a Claim:

In order to recover under this limited warranty, Original Purchaser must make a claim to Company and, if necessary, present acceptable proof of purchase. To start a claim submission, the Original Purchaser should contact Product Support at 1-877-671-7011 or 1-512-712-1316.

What Is Not Covered:

The following costs, expenses and damages are NOT COVERED by the provisions of this limited warranty: (1) back charges, labor costs or removal or re-installation of said products; (2) shipping and freight expenses required to return product to Company; (3) failures, defects, or damage (including, but not limited to, any security failure or loss of data) caused by any third party product, service, or system connected or used in conjunction with the Products; and (4) any other incidental, consequential, indirect, special, or punitive damages including, but not limited to, loss of use of the control panel or video recorder, loss of profit, loss of revenue, loss of interest, lost goodwill, work stoppage, impairment of other goods, loss by reason of shutdown or non-operation, damage to property, increased expenses or operation, or third-party claims, arising out of any theory of recovery, including warranty, contract, statutory or tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Credentials made only of PVC material are not covered under this warranty.

Exclusions to Warranty:

The provisions of this warranty do not apply to any Product which has been damaged due to conditions in which Company has no control including, but not limited to, catastrophe, improper installation or maintenance, accidents, modification, misuse, abuse, negligence, alteration, tampering or disassembly, undue electrical discharge or lightning strike, improper storage or use outside its intended and normal manner.

LIMITATION OF LIABILITY:

COMPANY MAKES NO OTHER WARRANTY, CONDITION OR REPRESENTATION OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES AND CONDITIONS RELATING TO THE MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED, WHERE ALLOWED BY LAW. IN NO EVENT WILL COMPANY BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND.

Additional Terms:

Company does not authorize any person to create for it any obligation or liability in connection with the Product. Company's maximum liability hereunder is limited to the original purchase price of the Product. No action arising of out any claimed breach of this warranty by Company may be brought by the Original Purchaser more than one year after the cause of action has arisen.

Applicability of Local Laws:

This warranty gives you specific legal rights, and you may also have other rights, permitted by law, which vary from state to state. If this Product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty.

WARRANTY

Schlage Electric Strikes, System Accessories and Power Supplies

5-Year Limited Warranty – Electric Strikes:

Schlage Lock Company, LLC (the "Company") extends a five-year limited warranty to the original end-user purchaser ("Original Purchaser") of our electric strikes, against defects in materials and workmanship of the mechanical components under normal use and service and, a one-year limited warranty on the electrical components including the solenoid and wiring.

12-18 Month Limited Warranty:

The Company extends a 12-month limited warranty from date of installation on system accessories and power supplies (not to exceed 18 months from the date of shipment from factory), to the original end-user purchaser ("Original Purchaser") of the products manufactured by the Company against defects in material and workmanship under normal use and service.

What The Company Will Do:

Upon return of the defective Product to the Company or its authorized distributor for inspection, free and clear of all liens and encumbrances and accompanied by the statement of defects and proof of purchase, the Company will repair or replace, at its option, the defective Product.

Original User:

These warranties only apply to the Original User of Products. These warranties are not transferable.

What Is Not Covered:

The following costs, expenses and damages are not covered by the provisions of these limited warranties: (i) labor costs including, but not limited to, such costs for the removal and reinstallation of Products; (ii) shipping and freight expenses required to return the Products to the Company; or (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

The provisions of these limited warranties do not apply to Products: (i) used for purposes for which they are not designed or intended; (ii) which have been subjected to alteration, misuse, abuse, negligence, or accident; (iii) which have been improperly stored, installed, maintained, repaired or operated; (iv) which have been used in violation of written instructions provided by Schlage; (v) which have been subjected to improper temperature, humidity, or other environmental conditions (i.e., corrosion); or (vi) which, based on the Company's examination, do not prove to the Company's satisfaction non-conformance to the warranties.

(a) THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF BUYER SET FORTH HEREIN ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY'S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE PRODUCT, ANY COMPONENT THEREOF. Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company's maximum liability under these warranties is limited to the purchase price of the Product that gives rise to the claim. No action arising out of any claimed breach of these warranties by the Company may be brought by the Original User more than one (1) year after the cause of action has arisen.

CONSUMER PRODUCTS: WITH RESPECT TO "CONSUMER PRODUCTS" AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT ("MMWA"), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED ABOVE. (C) SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

WARRANTY

Schlage Electronic Locks

12-24 Month Limited Warranty:

Schlage Lock Company, LLC (the "Company") extends a 12 month limited warranty from date of installation, not to exceed 24 months from the date of shipment from factory, for LE, NDE, CO and AD Series locks and reader modules; GWE wireless gateway; and WPR400, WRI400, TK400, CT5000, PIB300, and PIM400 wireless accessories to the original user of the products manufactured by the Company (the "Products") against defects in material and workmanship from the date of purchase.

What The Company Will Do:

Upon return of the defective Product to the Company or its authorized distributor for inspection, free and clear of all liens and encumbrances and accompanied by the statement of defects and proof of purchase, the Company will repair or replace, at its option, the defective Product.

Original User:

These warranties only apply to the Original User of Products. These warranties are not transferable.

What Is Not Covered:

The following costs, expenses and damages are not covered by the provisions of these limited warranties: (i) labor costs including, but not limited to, such costs for the removal and reinstallation of Products; (ii) shipping and freight expenses required to return the Products to the Company; or (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

The provisions of these limited warranties do not apply to Products: (i) used for purposes for which they are not designed or intended; (ii) which have been subjected to alteration, misuse, abuse, negligence, or accident; (iii) which have been improperly stored, installed, maintained, repaired or operated; (iv) which have been used in violation of written instructions provided by Schlage; (v) which have been subjected to improper temperature,humidity, or other environmental conditions (i.e., corrosion); or (vi) which, based on the Company's examination, do not prove to the Company's satisfaction non-conformance to the warranties.

(a) THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF BUYER SET FORTH HEREIN ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY'S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE PRODUCT, ANY COMPONENT THEREOF. Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company's maximum liability under these warranties is limited to the purchase price of the Product that gives rise to the claim. No action arising out of any claimed breach of these warranties by the Company may be brought by the Original User more than one (1) year after the cause of action has arisen.

CONSUMER PRODUCTS: WITH RESPECT TO "CONSUMER PRODUCTS" AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT ("MMWA"), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED ABOVE. (C) SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Terms & Conditions • Schlage Key Systems Sales Policy

Schlage Key Systems Sales Policy

The following specific product terms and conditions are applicable only to the extent provided herein. All other terms and conditions contained in the General Terms and Conditions of Sale and Service provided in this Price Book will govern the sale of products identified in this Price Book.

Definition-

Standard keyways are C, CE, E, EF, F, FG, G, H, J, K, L. All other keyways are considered restricted. Everest, Everest Primus, Classic Primus and all other restricted keyway products (Quad, Reversed, Numbered) manufactured by the Schlage Lock Company are offered for sale by policies set forth per product type and security levels through specific channels of distribution. Possession of this price book or any other Schlage price book does not constitute "the right to purchase" these products. Please refer to the sales policy below for terms and condition. The term keyway(s) refer(s) to keyway, key sections or side bit milling.

Standard Classic (Obverse) Key Sections- no restriction

Standard keyways are Classic (Obverse) C, CE, E, EF, F, FG, G, H, J, K, L.

Everest and Everest 29 Open (C and S Key Sections)

Everest and Everest 29 Open (C & S keyways) include non-Primus products with Everest C and Everest 29 S keyways and key sections. Schlage only sells Everest and Everest 29 Open products to commercial security professionals. Commercial security professionals purchasing Everest and Everest 29 Open products from Schlage are permitted to stock and to originate or duplicate keys without signature verification.

Purchasers of Everest and Everest 29 open (C & S) are permitted to resell the products in accordance with their distribution agreement to end users and to other commercial security dealers who have a professional locksmith on staff but are expressly prohibited from selling to:

• i) Any residential retail outlet.
• ii) Any individual or entity purchasing or selling products through any method of auction.

End User Keyways - Primus / Primus XP levels 3, 4 & 9, Everest D, Everest B, Everest 29 T, Everest 29 R, Quad, Reversed, Numbered.

End user restricted keyways are manufactured and sold by Schlage for use within the end user facilities only and are not for dealer or locksmith's use or distribution. The facilities are described as the "ship-to" address pre-authorized by the end user via a letter of authorization (LOA) or face sheet (depending upon the key system type).

End user keyway products may be stocked at the end user location only, unless authorized otherwise in writing by the end user. Every new end user system, using these restricted keyways, requires prior approval from the local RSO sales office management.

Restricted end user keyways may not be sold to any contract hardware dealer or wholesale distributor not open as a direct Schlage account as the time of the sale, unless authorization has been granted in writing by the local RSO sales office management where the end user reside.

Locksmiths/ dealers' keyways - Primus/ Primus XP levels 1, 1+, 2, 7, 8, Everest B234 & B235, Everest 29 R234 & R235. Locksmith/ dealer key section can be sold to commercial locksmiths/ dealers only.

Right to stock and sell locksmiths/ dealers restricted keyways requires the appropriate written agreement with Schlage and approval by the local RSO sale office management. Please contact your local RSO sale office for a copy of these contracts and additional information.

Schlage hereby reserves the right to terminate or take any other legal action against any party that violates this policy.

Restricted Keyway Policy • Terms & Conditions

Restricted Keyway Policy

Everest B, Everest 29 R

All Everest and Everest 29 SFIC (B and R Families) keyways are restricted.

When ordering a new keying system, include the following:

• Job (end-user) name, city, state and zip code.
• Letter of Authorization (LOA) Authorized ship-to address for key blanks, cores and cut keys on end-user's official stationery. See Forms & Examples for sample letter of authorization.
  • Numerically defined specifications for expansion of all branches of the key system.

The factory will assign a "facility code" which will appear on all keys and blanks for this job. When ordering additions to an existing keying system, include the following:

• Job (end-user) name, city, state and zip code.
• Facility code previously assigned by Schlage and stamped on all existing keys and blanks.
• Registry number of the keying system as established by Schlage.
• Letter of authorization on end-user's official stationery is required when:
• End-user places order with new dealer.
• Order is to be drop shipped to a different ship-to address than originally authorized by the end-user.

See Forms & Examples for sample letter of authorization.

Bitting list (transcript) orders require a letter of authorization on the end-user's official stationery. Prevailing prices apply.

Everest D, Everest 29 T

All Everest D and Everest 29 T keyways are restricted.

When ordering a new keying system, include the following:

• Job (end-user) name, city, state and zip code.
• Letter of Authorization (LOA) Authorized ship-to address for all products on end-user's official stationery. See Forms & Examples for sample letter of authorization.
  • Numerically defined specifications for expansion of all branches of the key system.

The factory will assign a "facility code" which will appear on all keys and blanks for this job. When ordering additions to an existing keying system, include the following:

• Job (end-user) name, city, state and zip code.
• Facility code previously assigned by Schlage and stamped on all existing keys and blanks.
• Registry number of the keying system as established by Schlage.
• Letter of authorization on end-user's official stationery is required when: End-user places order with new dealer. Order is to be drop shipped to a different ship-to address than originally authorized by the end-user.
• See Forms & Examples for sample letter of authorization.

Quad, Numbered ("Paracentric") and Reverse Keyway Family Policy

A letter of authorization from the end-user is required for all orders for restricted keyway plugs, 0-bitted and 1-bitted products and all key blanks. Restricted keyway products are not available keyed random. The letter of authorization must include the address in which the materials will be shipped. Keyway or keyway family must be referenced in the letter. Letters must be dated and signed by the end user. Letters dated more than 6 months prior to the order submission date will not be accepted. Letters for projects that are ongoing may be older than six months if effective dates are referenced in the letter. With the exception of the signature, all other information must be typed.

Allowable End User Authorizations for Restricted Keyways:

The end user can authorize a dealer or distributor to order and inventory products if they so choose. This authorization requires the submission of a fully completed "Letter of Authorization" or "Signature Card", depending on the product type requirements, by the end user to Schlage.

Construction Core Program Policy

Full size and small format construction cores will be invoiced under standard payment terms. Credit for these cores, less the handling charge, will be issued upon their return to the factory. Please contact customer service for return authorization. Customers may not deduct payment for construction cores prior to completion of their authorized return.

Control Keys for Interchangeable Cores

A single control key will be added to orders containing interchangeable cores where a new masterkey system, master key system expansions requiring a different control key and all construction core orders are placed and does not include a control key on the purchase order. Construction core orders will include both a control and user key.

Classic Keyways

Everest® Keyways

Terms & Conditions • Cylinder Policies

Primus®/ Primus XP Sales Policy

Primus High Security cylinder products manufactured by the Schlage Lock Company are offered for sale through specific channels of distribution, based on stocking requirements and security levels. Possession of this price book or any other Schlage price book does not constitute "the right to purchase" Primus products.

Important: In stocking levels where purchase agreements are required, a fully executed purchase agreement, including initial minimum inventory order, must be in place before any Primus products may be quoted or purchased. Contact your RSO Consultant for specific details.

The prices contained herein apply to Primus Levels 1 through 9 with respect to the actual product. Availability of product is subject to additional conditions as follows:

PRIMUS/PRIMUS XP LEVEL 1: For retail locksmiths and Schlage dealers. Standard nationwide side bitting by keyway. Stocking level requires a separate Primus/Primus XP agreement. Initial inventory commitment required for distributors but not for participating locksmiths. Obverse keyways only. HP, JP and LP section keys are not available.

PRIMUS LEVEL 1 PLUS: For retail locksmiths. A side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale distributor. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase by the wholesaler and the locksmith. Obverse keyways only. HP, JP and LP section keys are not available. Cylinders are always furnished less key blanks (LKB).

PRIMUS XP LEVEL 1 PLUS: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of the dealer physical location zip-code. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase. Obverse keyways only. Cylinders can be ordered LKB, KD, KA or MK.

PRIMUS/PRIMUS XP LEVEL 2: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned to dealer by time zone. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase. Obverse keyways only.

PRIMUS/PRIMUS XP LEVEL 3: End user level not stocked by dealers. Key systems are assigned a side bitting exclusive within 2-digit zip code (Level 3G) for orders of 60 - 1,999 Primus cylinders. Orders of fewer than 60 Primus cylinders are randomly assigned a side bitting from a small nationwide pool of side bittings (Level 3U). Distribution through Schlage dealers and Schlage wholesale distributors. Obverse and Quad keyways only.

PRIMUS/PRIMUS XP LEVEL 4: End user level not stocked by dealers. Key systems are assigned a side bitting exclusive within a time zone (Level 4Z) for orders of 2,000 - 3,999 Primus cylinders. A nationwide exclusive side biting (Level 4N) is assigned to key systems of 4,000 or more Primus cylinders. This exclusivity can be purchased for a separate fee for smaller quantities of cylinders. This price book does not contain the fee schedule. Contact your RSO Consultant for specific information. Distribution through Schlage dealers and Schlage wholesale distributors. Obverse and Quad keyways only.

PRIMUS LEVEL 7: For retail locksmiths. Side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale distributor. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase by the Schlage wholesaler and the locksmith. Same as Level 1 PLUS above, but with Everest S Family keyways only.

PRIMUS XP LEVEL 7: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of of the dealer physical location zip-code. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase. All Everest 29 key sections. Cylinders can be ordered MK, KA, KD or LKB.

PRIMUS/PRIMUS XP LEVEL 8: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned to dealer by time zone. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase. Equivalent to Level 2 above, but with Everest S Family keyways only.

PRIMUS/PRIMUS XP LEVEL 9: End user level not stocked by dealers. Key systems are assigned varying degrees of geographically exclusive side bittings based on a sliding scale of purchase commitment or separate fees. This price book does not contain the fee schedule. Contact your RSO Consultant for specific information. Distribution through Schlage dealers and Schlage wholesale distributors. Level 9U, 9G, 9Z, and 9N are equivalent to Levels 3U, 3G, 4Z, and 4N above, but with Everest S and T Family keyways.

The following side bit milling exclusivity criteria apply to both levels 3, 4 & 9:

• 1- 60 cylinders-Random assignment
• 61-1999 cylinders-First two digits of zip-code
• 2000-3999 cylinders-Time-Zone Exclusivity (also available for $10,000 fee for an organization who would like this exclusivity and doesn't meet cylinders quantity requirement).
• 4000 + cylinders-Nation Wide Exclusivity.(also available for $40,000 fee for an organization who would like this exclusivity and doesn't meet cylinders quantity requirement).

Important Ordering Information

See Forms & Examples: Primus and Everest 29 Primus Ordering Checklist for a checklist of information required to process a Primus order. Note that, for security reasons, all end user Primus levels (Level 3, 4 and 9) require a Facesheet (MS-E120) bearing an original signature. Opening orders for end user Primus levels also require a Signature Card (MS-E130) bearing original signatures. Facesheets and signature cards are used to authenticate the end user request for product, therefore orders received without the correct supporting documents (or without original signatures) are subject to delays or cancellations. Blank Facesheets and Signature Cards are included in the Forms & Examples section of this price book for your reference. Additionally, electronic version of these forms are available at allegion.com/us.

The Schlage Lock Company reserves the right to make changes in designs and specifications, to make additions or improvements on its products, or to discontinue products without incurring any obligation. The Schlage Lock Company is not responsible for any modification, addition, or alteration to our products by others.

	Inventory commitment Requirements-Commercial Locksmiths Levels
Primus XP		Everest 29 Primus XP
Level 1	None	N/A	N/A
Level 1+	$7,500	Level 7 XP	$7,500
Level 2	25,000	Level 8	$25,000

Electronic Validation from Schlage

Electronic Validation (e-validation) is an online system for the use of the end user to create electronic authorizations replacing the letter of authorization (LOA) and Primus Facesheet processes. This online validation system is designed to ease the burden of an end user providing authorizations for ordering restricted key and cylinder products on their behalf. Through this system, the end user can register for an online account with Schlage that will allow them to manage their shipping addresses, shipping contacts and additional authorized users for their restricted products. Through this system, they can then generate an electronic Facesheet that they can provide to the distributor of their choice to allow an order for restricted products to proceed. Enrolling in and using this feature will reduce the overall time for an order to be processed from the time that the end user has determined the need for product. The electronic Facesheet provided by the e-validation system can be faxed or emailed along with a distributors order reducing the time and energy required for original copies of Facesheets previously required. The system is for both new and existing restricted key system owners. For new restricted systems, a registration process will provide the ability to create the initiating Facesheet for the project.

Products/key systems eligible for e-validation:

Everest – B and D restricted family of keyways

Everest 29 – R and T restricted family of keyways

Primus – All keyway families that include the Primus feature

Primus XP – All keyway families that include the Primus XP feature

E-validation can be accessed at the following web address: HTTPS://mycredentials.allegion.com

Terms & Conditions • Cylinder Policies

Master Key Shipment Policy

Keyway Family of Master Key System	Standard Method of Shipment
• Classic Restricted (Numbered, Quad and Reverse) • Classic Primus (Obverse and Quad) • Everest Restricted (B and D Family) • Everest 29 Restricted (R and T Family) • Everest Primus (C and D Family) • Everest 29 Primus and Primus XP (S and T Family) • Classic Open (Obverse) • Everest Open (C Family) • Everest 29 Open (S Family)	2-Day Air • Tracking number is assigned to shipment • Recipient's signature is required upon delivery

All goods are shipped F.O.B. factory and become the customer's property when they pass into the hands of the transportation company. Schlage reserves the right to use our choice of carrier.

Schlage Default Keyways

Schlage Commercial products (excluding Portable Security)

Default keyway is Everest 29 S123 For other optional keyways, please specify

Schlage Electronics

Default keyway is Everest 29 S123 For other optional keyways, please specify

Portable Security - Kryptonite:

default to C keyway KD

For made to order products, please specify the keying and keyway

Schlage Residential: (F, B60, Dexter)

Default keyway is C

Distribution Policy and Finishes • Terms & Conditions

Distribution Function and Location Policy

The Schlage customer relationship includes the nonexclusive area of primary sales responsibility and the channel of distribution assigned by Schlage. It is vital to our success and for the effective management of the distribution of our products that the Schlage customer relationship, once it is satisfactorily established between us, should not be changed without our approval. Therefore, after selection by Schlage as a distributor of one or more of Schlage products, a customer should continue to perform that distribution function from the location of its business at the place or places utilized at the time of selection. A customer should not change its Schlage distribution function or establish a different or additional location without the prior written consent of Schlage.

Schlage reserves the right to discontinue, after appropriate notice, sale of its products to any customer which refuses to adhere to this policy. Schlage also reserves the right to change, in its sole discretion, the number and locations of the distributors authorized to distribute its products in any area. This determination will be based upon, among other considerations, the success or failure in developing the market for Schlage products.

Hardware Finishes

Schlage Lock finishes are durable, top quality finishes obtained by the careful processing of solid brass, bronze, stainless steel or other materials. Where required, a protective clear coating is applied and cured under high temperature. It is important that climatic conditions and usage be taken under consideration when selecting finishes. This is especially true in areas subjected to strong corrosive vapors, humid climate or sea air which, in a short time, may have a damaging effect on metal finishes. The longevity and preservation of the finish appearance is determined by base metal and finishing process. Clear protective coating or other organic finishing applications may require different methods of cleaning and care. As an example, non-clear coated finishes should not be cleaned with soaps or any solvents; organically coated surfaces should periodically be cleaned with a mild, nonabrasive soap and buffed lightly with a clean cloth. The type of base metal and finishing techniques must be considered when applying any cleaning or preservative method. Contact the Schlage Technical Services Department for further information on the care of finished hardware.

In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance, regardless of base metal of finishing process. A, AL, CS, D, ND, F, FA, H, S, S200-Series and Dexter by Schlage levers are zinc-based material and are plated to match finishes indicated. L-Series will utilize a brass material for 612 and 613 finishes. Finishes of latches, strikes, cylinders/cores, and visible mounting screws, though similar in appearance, may differ from the finish of the trim. Finish numbers in the 600-Series are the BHMA (Builders Hardware Manufacturers Association) industry standard.

Commercial Finish Codes and Descriptions:

The nearest old U.S. equivalent code designations are shown in parenthesis ( ).

Symbol	Description	Symbol	Description
605 (3)	BRIGHT BRASS, Clear Coated	622(19)	MATTE BLACK, Coated
606 (4)	SATIN BRASS, Clear Coated	625 (26)	BRIGHT CHROMIUM PLATED, No Coating
609 (5)	ANTIQUE BRASS, Satin Brass, Blackened	626 (26D)	SATIN CHROMIUM PLATED, No Coating
	Satin Relieved, Clear Coated	629 (32)	BRIGHT STAINLESS STEEL, No Coating
612 (10)	SATIN BRONZE, Clear Coated	630 (32D)	SATIN STAINLESS STEEL, No Coating
613* (10B)	OIL RUBBED BRONZE, Oxidized Satin	643e	AGED BRONZE, Clear Coated
	Bronze, Oil Rubbed, No Coating
619 (15)	SATIN NICKEL, Satin Nickel Plated, Clear Coated

^* Oil rubbed bronze (613) is considered a category "B" finish by ANSI/BHMA and will vary in color when applied to different alloys and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil rubbed bronze will wear off over time due to the "rubbed" finishing method that has no protective coating or plating.

Notes

For more than 100 years Allegion brands have been providing innovative access control solutions. We are at the forefront of access control innovation, including contactless smart credentials, wireless security products and biometrics.

Allegion electronic security offers the most extensive range of access control and security management solution on the market today. This comprehensive line of products allow you to build a complete access control system from the ground up. For facilities with existing access control systems, the open architecture design of Allegion electronic security products facilitates easy integration into your existing system. Because Allegion understands that your needs will evolve over time, Allegion also provides the opportunity for an easy migration path as technology advances.

At Allegion, we understand that each facility has unique security requirements. Our extensive line of products, flexible options and ability to adapt to your existing environment make it easy to find a solution that will fit your security needs...whatever they may be.

Allegion Solutions Overview

	Allegion offers comprehensive security solutions for each facility. To help you identify which solution is right for your facility, here are							Credential Compatibility
	some reader technologies with their compatible credential technologies. Allegion readers and credentials are designed on an open architecture platform. For more details on compatibility, please refer to the data sheets.	PIN	Magnetic Stripe (1,2,3 Track)	mity Card (125 kHz) Proxi	mart Card (13.56 MHz) S	iButton	metry) metric (Hand Geo Bio	mpliant FIPS 201-2 Co
Readers LE/NDE Series	Multi-Technology Reader			X	X
	AD Series Keypad Reader (KP)	X
	AD Series Magnetic Stripe + Keypad Reader (MGK (Insert) or MSK (Swipe)	X	X
	AD Series Magnetic Stripe Reader (MG (Insert) or MS (Swipe))		X
AD Series Readers	AD Series Multi-Technology + Keypad Reader (MTK)	X		X	X
	AD Series Multi-Technology Reader (MT)			X	X
	AD Series Multi-Technology FIPS 201-2 Compliant Reader (FMK)	X		X	X			X
	CO Series Keypad Reader (KP)	X
	CO Series Magnetic Stripe (Swipe) + Keypad Reader (MSK)	X	X
CO Series Readers	CO Series Magnetic Stripe (Swipe) Reader (MS)		X
	CO Series Proximity + Keypad Reader (PRK)	X		X
	CO Series Proximity Reader (PR)			X
	PR10 Proximity Reader - Mini Mullion			X
	SM10 Contactless Smart Reader - Mini Mullion				X			X
	MT11 Multi-Technology Reader - Mullion			X	X			X
	MT15 Multi-Technology Reader - Wall Mount			X	X			X
	MTK15 Multi-Technology Reader with Keypad - Wall Mount	X		X	X			X
	MTMS15 Multi-Technology Magnetic Stripe Reader - Wall Mount		X	X	X			X
worked Readers	MTMSK15 Multi-Technology Magnetic Stripe Reader with Keypad - Wall Mount	X	X	X	X			X
	SMR5 Magnetic Stripe Card Reader		X
	SMR10 Magnetic Stripe Card Reader		X
	SMR20 Magnetic Stripe Card Reader + Keypad	X	X
Net	SRT-100 iButton Mullion Mount Reader					X
	SERIII-W Scramble Keypad	X
	SERII-WB Scramble Keypad	X
	SEKPDMWG Electronic Keypad - Mullion Mount	X
	SEKPDWG Electronic Keypad	X
	SEKPD8B Electronic Keypad	X
metrics Bio	HandKey-2 (F Series)	X	X	X	X		X

CREDENTIALS - TABLE OF CONTENTS
HOW TO ORDER	24
HOW TO ORDER DETAILS Schlage Smart Credentials using MIFARE® DESFire® EV1 Multi-Technology: Proximity and Schlage Smart Credentials	25 26
using MIFARE DESFire EV1 Schlage Smart Credentials using MIFARE Plus® Multi-Technology: Proximity and Schlage Smart Credentials	26 27
using MIFARE Plus Schlage Smart Credentials using MIFARE Plus® Multi-Technology: Proximity and Schlage Smart Credentials	27 28
using MIFARE Plus Schlage Smart Credentials using MIFARE Classic® Multi-Technology: Proximity and Schlage Smart Credentials	28 28
using MIFARE Classic Schlage Smart Wristband using MIFARE Classic	28 28
SCHLAGE PROXIMITY CREDENTIALS	29
SCHLAGE CREDENTIALS - OTHER PRX Offering - discontinued effective May 6, 2019) Magnetic Stripe Credentials iButton Credentials	30 30 30 30
CREDENTIAL SERVICES Slot Punch Options Programming Fee Custom Artwork	31 31 31 31
CARDTRAX OVERVIEW	32
CARDTRAX APPLICATION	33
CARDTRAX APPLICATION	34
PRINT SCHEME	35
CUSTOM ARTWORK	36

877-671-7011
Customer Service:	Technical Support:
Order Status, Credit Returns of Non-Defective Products, General Sales Questions	Technical Questions/Issues, Returns of Defective Products, Repairs
Email Requests to: Sales Support contact information on Page 2.	Contact For Technical Assistance: Readers_Credentials_Biometrics_TechProdSupport@allegion.com
	Inside Sales 855-248-0302
General Sales Questions, Pre-printed cards, CardTrax Accounts ElectronicInsideSales@allegion.com

For Credentials Warranty Information please see page 11.

Schlage Credential Technology Types

Schlage offers a wide range of credential technologies and form factors.

Mobile Credentials

Schlage offers a variety of ways to deliver mobile credentials to your students' and employees' phones. Using near field communication (NFC) or Bluetooth technology, a smartphone app works just like an ID card, providing more for your students and employees while enhancing the security of their credential. Easily assign credentials today using the access control software of one of our developer network partners. Schlage mobile credentials offer a much higher level of security, based on encrypted smart card technology.

Smart Credentials

Ideal for facilities with moderate to high security needs, Schlage smart credentials put you in control by delivering smarter solutions. Using MIFARE Classic®, MIFARE Plus® or MIFARE® DESFire® EV1 and EV2 technology, these credentials protect your most sensitive data by utilizing extra layers of security protection. Smart credentials can be used for many applications beyond access control including transit, cashless vending, and cafeteria point of sale.

Multi-Technology Credentials

Schlage multi-technology credentials are extremely flexible. Particularly useful during a transition from proximity technology to smart technology, these cards can be read by both proximity readers and smart readers. This allows your customers to economically migrate to the latest smart technology at their own pace.

Proximity Credentials

Schlage proximity credentials are a solution for facilities with less demanding security needs. Utilizing 125 kHz proximity technology, these credentials are a cost-effective solution and can interface with many industry leading proximity readers.

Magstripe Credentials

Schlage magstripe credentials are a solution for facilities with less demanding security needs. Utilizing magstripe technology, these credentials are a cost-effective solution.

How to Order

1) Model Number	2) CardTrax Number		3) Programing 4) Slot						6) Custom Artwork Number	7) Special Instructions
		Technology Type	Bit Format	Facility Code City Code		Badge ID Start Number
		Smart				Start Internal
						Start External
		Proximity				Start Internal
						Start External
				Please submit orders to Readers.Credentials.Orders@allegion.com with purchase order.

Example Order #1

1) Model Number	2) CardTrax Number		3) Programing						6) Custom Artwork Number	7) Special Instructions
8520M1	N/A	Technology Type	Bit Format	Facility Code City Code		Badge ID Start Number	SPH	01	N/A	CRS
		Smart	26A	1	N/A	Start Internal 100
						Start External 100
		Proximity	N/A	N/A	N/A	Start Internal N/A
						Start External N/A
	Please submit orders to Readers.Credentials.Orders@allegion.com with purchase order.

Example Order #2

1) Model Number	2) CardTrax Number		3) Programing 4) Slot							6) Custom Artwork Number	7) Special Instructions
8920	N/A	Technology Type	Bit Format	Facility Code City Code		Badge ID Start Number		N/A	04	N/A	N/A
		Smart	36X	2	N/A	Start Internal	100
						Start External 100
		Proximity	26A	5	N/A	Start Internal	200
						Start External 200
				Please submit orders to Readers.Credentials.Orders@allegion.com with purchase order.

1) Model Number

Please reference pages 26 -31 to pick your credential model number to assure you recieve the correct technology, form factor and memory size. Below is how the credential model numbers are created but not every combination is available and there are some unique part numbers available.

Sample Credential Model Number:

8520M1 - Schlage MIFARE DESFire EV1 Smart Card 2K byte/16k bit with Magnetic Stripe ISO Glossy White

Available Form Factors:

	Clamshell	ISO – Glossy White	Keyfob	Thin Keyfob Wristband		PVC Adhesive Disk PVC Adhesive Patch
Dimensions (HWT in inches)	3.37x2.125 x0.075	3.37x2.125 x0.033	2x1.24 x0.038	1.77x1.18 x0.06	0.63x7.68 x0.295	35mm 3.37x2.125 x0.033

2) CardTrax

T - Think Keyfob

CardTrax format is a program designed to keep track of card programming and Badge ID numbers to eliminate confusion in ordering sequential numbering and / or programming details, and ensures duplicate cards are not issued. Cards will automatically be provided as "next in line" unless otherwise specified. Restricted CardTrax is an exclusive CardTrax Program for qualified end-user customers that provides global programming protection. If a CardTrax number is provided programming information is not required. Please reference pages 32-34for more information on CardTrax and a complete application form.

3) Programming Information 1,2

Please reference the below chart for a full list of Bit Formats provided by Allegion and the technologies in which they are available. Once a bit format has been selected determine the correct facility code based on the facility code range available with your selected bit format. Finally, determine your starting Badge ID number based on the range available with your selected bit format. When specifying your Badge ID range please specify the interal starting number, or the starting number that will be in the chip and an external starting number that will be printed on the card. By default, the internal number matches the external number; please specify if that is not your desired option.

Available Bit Formats:

Bit formats	Facility Code Range	Number Range	Prox	Smart
26A (125 kHz Standard)	0-255	0-65,535	Y	Y
32X	N/A	0-1,073,741,823	Y	Y
34N	0-255	0-65,535	Y	Y
34S	0-4,095	0-1,048,575	Y	Y
35C *	0-4,095	0-1,048,575	Y	Y
36X	0-4,095	0-2,097,151	Y	Y
37H	Not Applicable	0-34,359,738,367	Y	Y
37X	0-65,535	0-524,288	Y	Y
40X * (13.56 MHz Standard)	0-1,023	0-268,435,455	N	Y
48X	0 – 1,048,575	0-1,048,575	N	Y

^* For CardTrax™ Restricted program members only

Important Programming Notes:

• 1) It is highly recommended that programming be specified on all credential orders. If programming is not specified a generic default programming will be provided. The default programming is a 26A bit format and a randomly generated facility code and badge ID range.
• 2) When ordering combo credentials, programming for both the smart and proximity technology must be specified. The same programming will automatically be used for both technologies if two different lines of programming are not specified.

4) Slot Punch

Slot punch is avialable on ISO and clamshell cards ONLY. Punch mark guides are on all ISO cards. Please specify slot punch orientation if desired (vertical or horizontal). There is a per card cost for factory slot punching of ISO cards. Please reference page 31 for slot punch options and price per card. Clamshell cards are vertically slot punched at no charge.

5) Card Print Scheme

Various card print schemes providing information such as the technology, format number, order number and Badge ID number are available. This information can be printed on different locations on ISO and Clamshell cards. If nothing is provided the standard print scheme, 01 will be provided. Please reference page 35 for available print schemes

6) Custom Artwork Number

Please reference page 36 for more information on Custom Artwork

7) Special Instructions

Please include any additional special instructions for your credential order. Special instructions include but are not limited to a cross reference sheet (specify CRS) or a custom configuration (include a CE number)

Smart Credentials

Schlage Smart Credentials using MIFARE® DESFire® EV1 Technology

• 13.56 MHz smart technology
• Uses MIFARE DESFire EV1 Technology

	• Meets ISO standard 14443A	(Minimum order is 100)
8420	Schlage MIFARE DESFire EV1 Smart Card 2K byte/16k bit Clamshell	$7.80
8440*	Schlage MIFARE DESFire EV1 Smart Card 4K byte/32k bit Clamshell	$8.80
8480*	Schlage MIFARE DESFire EV1 Smart Card 8K byte/64k bit Clamshell	$10.70
8520	Schlage MIFARE DESFire EV1 Smart Card 2K byte/16k bit ISO Glossy White	$8.40
8540	Schlage MIFARE DESFire EV1 Smart Card 4K byte/32k bit ISO Glossy White	$9.50
8580	Schlage MIFARE DESFire EV1 Smart Card 8K byte/64k bit ISO Glossy White	$11.40
8520M1	Schlage MIFARE DESFire EV1 Smart Card 2K byte/16k bit with Magnetic Stripe ISO Glossy White	$9.20
8540M1	Schlage MIFARE DESFire EV1 Smart Card 4K byte/32k bit with Magnetic Stripe ISO Glossy White	$10.20
8580M1*	Schlage MIFARE DESFire EV1 Smart Card 8K byte/64k bit with Magnetic Stripe ISO Glossy White	$12.20
8720*	Schlage MIFARE DESFire EV1 Smart 2K byte/16k bit PVC Adhesive Patch	$7.70
8740*	Schlage MIFARE DESFire EV1 Smart 4K byte/32k bit PVC Adhesive Patch	$8.70
8780*	Schlage MIFARE DESFire EV1 Smart 8K byte/64k bit PVC Adhesive Patch	$10.50
	Multi-Technology: Proximity and Schlage Smart Cards using MIFARE® DESFire® EV1	(Minimum order is 100)
8920*	Proximity and Schlage Smart Card Combo 2K byte/16k bit ISO Glossy White	$12.40
8940*	Proximity and Schlage Smart Card Combo 4K byte/32k bit ISO Glossy White	$13.50
8980*	Proximity and Schlage Smart Card Combo 8K byte/64k bit ISO Glossy White	$15.60
8920M1 *	Proximity and Schlage Smart Card Combo 2K byte/16k bit with Magnetic Stripe ISO Glossy White	$12.90
8940M1 *	Proximity and Schlage Smart Card Combo 4K byte/32k bit with Magnetic Stripe ISO Glossy White	$13.90

8980M1 * Proximity and Schlage Smart Card Combo 8K byte/64k bit with Magnetic Stripe ISO Glossy White $16.00

^* Lead Time: 4-6 weeks

^** Lead Time: 6-8 weeks

Schlage Smart Credentials using MIFARE Plus® Technology

• 13.56 MHz smart technology
• Uses MIFARE Plus Technology
• Meets ISO standard 14443A (Minimum order is 100)

5451	Schlage MIFARE Plus SE Smart Card 1K byte/8k bit Clamshell	$7.50
5551	Schlage MIFARE Plus SE Smart Card 1K byte/8k bit ISO Glossy White	$7.70
5551M1	Schlage MIFARE Plus SE Smart Card 1K byte/8k bit with Magnetic Stripe ISO Glossy White	$8.30
5540	Schlage MIFARE Plus S Smart Card 4K byte/32k bit ISO Glossy White	$11.00
5540M1	Schlage MIFARE Plus S Smart Card 4K byte/32k bit with Magnetic Stripe ISO Glossy White	$11.60
5951	Proximity and Schlage MIFARE Plus SE Smart Card Combo 1K byte/8k bit ISO Glossy White	$11.10
5951M1	Proximity and Schlage MIFARE Plus SE Smart Card Combo 1K byte/8k bit with Magnetic stripe ISO Glossy White	$11.70
5940	Proximity and Schlage MIFARE Plus S Smart Card Combo 4K byte/32k bit ISO Glossy White	$12.60
5940M1	Proximity and Schlage MIFARE Plus S Smart Card Combo 4K byte/32k bit with Magnetic Stripe ISO Glossy White	$13.30
5652T	Schlage MIFARE Plus EV1 2K byte/16k bit Thin Keyfob	$8.00
5692T	Proximity and Schlage MIFARE Plus EV1 2K byte/16k bit Thin	$11.60
5751	Schlage MIFARE Plus SE Smart 1K byte/8k bit PVC Adhesive Patch	$7.40

Smart Credentials

Schlage Smart Credentials using MIFARE Classic®

• 13.56 MHz smart technology
• Uses MIFARE Technology

• Meets ISO standard 14443A	(Minimum order is 100)

9420	Schlage MIFARE Classic Smart Card 2.5k bit Clamshell $4.70
9451	Schlage MIFARE Classic Smart Card 1K byte/8k bit Clamshell	$7.20
9520	Schlage MIFARE Classic Smart Card 2.5k bit ISO Glossy White	$5.80
9551	Schlage MIFARE Classic Smart Card 1K byte/8k bit ISO Glossy White	$7.10
9558	Schlage MIFARE Classic Smart Card 4K byte/32k bit ISO Glossy White	$10.00
9520M1	Schlage MIFAREClassic Smart Card 2.5k bit with Magnetic Stripe ISO Glossy White	$6.50
9551M1	Schlage MIFARE Classic Smart Card 1K byte/8k bit and Magnetic Stripe ISO Glossy White	$7.80
9558M1	Schlage MIFARE Classic Smart Card 4K byte/32k bit and Magnetic Stripe ISO Glossy White	$10.70
9651	Schlage MIFARE Classic Smart 1K byte/8k bit Keyfob (minimum order is 50)	$8.10
9651T	Schlage MIFARE Classic Smart 1K byte/8k bit Thin Keyfob (minimum order is 50)	$8.30
9751*	Schlage MIFARE Classic Smart 1K byte/8k bit PVC Adhesive Patch	$7.30
9758*	Schlage MIFARE Classic Smart 4K byte/32k bit PVC Adhesive Patch	$11.00

Multi-Technology: Proximity and Schlage Smart Credentials using MIFAREClassic® (Minimum order is 100)
9691T	Proximity and Schlage Smart Combo 1K byte/8k bit Thin Keyfob (minimum order is 50)	$10.90
9951*	Proximity and Schlage Smart Card Combo 1K byte/8k bit ISO Glossy White	$9.80
9958*	Proximity and Schlage Smart Card Combo 4K byte/32k bit ISO Glossy White	$11.60
9951M1*	Proximity and Schlage Smart Card Combo 1K byte/8k bit with Magnetic Stripe ISO Glossy White	$10.10
9958M1 *	Proximity and Schlage Smart Card Combo 4K byte/32k bit with Magnetic Stripe ISO Glossy White	$12.10

^* Lead Time: 4-6 weeks

iButton Keyfobs using MIFARE Classic® Technology (Minimum order is 50)

IBF-151	Combo Keyfob, 13.56 MHz MIFARE Classic (1K byte/8k bit) and iButton (minimum order is 50)
IBWB-151	Combo Keyfob, 13.56 MHz MIFARE Classic (1K byte/8k bit) without iButton (minimum order is 50)	$10.30

Schlage Wristbands Using MIFARE Classic® Technology (Minimum order is 100)

WHI = White

9351-XXX	Schlage MIFARE Classic 1K byte/8k bit Silicone Wristband (minimum order is 100) Available in eleven colors			$10.50
	BLK = Black	BLU = Blue	PNK = Pink
	PLE = Purple GRN = Green	CYN = Light Blue YEL = Yellow	ONG = Orange RED = Red

LME = Lime

Schlage Proximity Credentials

• 125 kHz proximity technology
• Compatible with most HID Proximity formats up to 37 bits

• Compatible with most HID readers		(Minimum order is 100)
7410	Proximity Card Clamshell	$3.50
7510	Proximity Card ISO Glossy White	$5.90
7510M1	Proximity and Magnetic Stripe Card ISO Glossy White	$6.60
7610	Proximity Keyfob (minimum order is 50)	$6.10
7610T	Proximity Thin Keyfob (minimum order is 50)	$6.50
7010	Proximity PVC Adhesive Disk (35 mm Disk) (minimum order is 50)	$5.60
IBF-110	Combo Keyfob, 125 kHz Proximity and iButton (minimum order is 50)	$14.60
IBF-120	Combo Key FOB, 125kHz Proximity and iButton, user Blue (minimum order is 50)	$20.30
IBWB-110	Combo Keyfob, 125 kHz Proximity without iButton (minimum order 50)	$7.30

Proximity Credentials Comparison Guide

Schlage Product Number	HID Product Number
	125 kHz Proximity Cards
7410	1326
7510M1	1336/1536
7610	1346
7510	1386/1586
7010	1391

Please Note:

This chart offers comparable part numbers, these are not direct replacements. Please use this chart as a guide and reference the spec sheet for the part specified to determine compatibility.

Credentials - Other

PRX Offering has been discontinued effective May 6, 2019

Credential Transition Guide
PRX #	Schlage Product #	Description
PRX1	7410	Proximity Card075" thick Clamshell
PRX3	7510	Proximity Card - Credit card size and .033" thick ISO Glossy White
PRX4	7510M1	Proximity Card - Dual Technologies - Magnetic Stripe and Prox .033" thick
PRX5	7710	Proximity PVC Adhesive Disk, .042" thick
PF1	7610	Proximity Keyfob

See Schlage Proximity Credentials page for pricing

Reference CardTrax Account: CTXP01462, (37 bit, Facility Code 1462) to receive the same programming information as the old PRX#

Magnetic Stripe Credentials

MAG1	Magnetic Stripe Card - not encoded, no logo. (minimum order is 100)
MAG2	Magnetic Stripe Card - Encoded (track 2 and track 3) with Schlage Logo. (minimum order is 100)	$3.70
MAG3	Magnetic Stripe Card - Encoded, no printing. Must have an enrollment reader to use this credential. (minimum order is 100)	$3.70

iButton Credentials

IBA	iButton (Adhesive Back)	$8.10
IBF	iButton on Fob - Black	$12.50
IBF -100	100 pack - iButton on keyfob - black	$1,023.00

Allegion, the Allegion logo, and XceedID are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners.

HID and Indala are both ® resistered.

Slot Punch Options

SPV	Vertical Slot Punch for ISO Cards (not available for magnetic stripe cards) MUST BE ORDERED WITH CARDS.	$0.46 per card
SPH	Horizontal Slot Punch for ISO Cards, including those with Magnetic Stripe MUST BE ORDERED WITH CARDS.	$0.46 per card

Programming Fee

Magnetic	Magnetic Stripe Programming Fee	$1.00per card
Stripe

Custom Artwork

One-Sided	One-sided printed artwork fee	$0.19 per card
Two-Sided	Two-sided printed artwork fee	$0.29 per card

Please Note: Credential Services do not receive discounts or quotes.

CARDTRAX™ Application Overview

CARDTRAX™ Application Overview

Thank you for your interest in CardTrax™, an account tracking program designed for individual end users or Integrator/OEMs to ensure card numbers are never duplicated.

There are two types of CardTrax™ accounts available, Standard CardTrax™ and Restricted CardTrax™. Standard CardTrax™ accounts are available for end users, PACS/OEM's and integrator customers. The account will track bit format, facility code, and Badge ID information. It will never allow duplicates to be sent to that specific customer. Restricted CardTrax™ accounts (bit formats 35C and 40X) are reserved for end users only. This type of account will track bit format facility code and Badge ID information. The bit format and facility code combination can only be registered by one end user, and once registered it is not available to any other end user.

To enroll, an organization must complete the application and authorization form and submit them to cardtrax@allegion.com inbox. This document will assist in the application process providing additional information. Allegion requires all previously established accounts to complete the application, so that records can be updated and properly maintained.

CardTrax™ Application Page 1

• Company Contact Information

• This is the information for the End User

• CardTrax™ Programming Information

• Enter the required programming to create your CardTrax™ account
• The guide beneath the CardTrax™ Programming Information shows you the bit formats available for use with the CardTrax™ program and the corresponding ranges. Please adhere to the guidelines.
  • Please note the disclaimer. If you have a restricted CardTrax™ account (35C or 40X) we ask that you have continuous activity to maintain this service.

CardTrax™ Application Page 2

• The Authorization Form

• If you have an existing CardTrax™ account, please indicate and provide the account number.
• If this is for a new account, please check New CardTrax™ Account

• Authorized account manager

• The owner of the CardTrax™ account needs to establish the authorized account manager. This could be the same contact provided on page 1 of the application in which case check "Same as Application form". If the contact is different please provide the correct contact.
• The authorized account manager is the only individual authorized to make any changes to the account, including but not limited to the authorized purchasers.
  • For restricted CardTrax™ accounts the authorized account manager must be the end user and cannot be a PACS/ OEM or Integrator.

• Approved Purchasers

• This section is for information on dealers allowed to place orders with this account for the end user

• Signature

• The end user signature is required on the application. Please also print name and date.

For any future authorization changes please resubmit page 2 of the CardTrax™ Application, the Authorization Form, to cardtrax@allegion.com and reference your current CardTrax™ account number

CARDTRAX™

Application Form

CardTrax™ is a program designed for an individual End User or an Integrator/OEM. Please fill in the appropriate section below. The program guarantees no duplication of Badge ID numbers with a unique Facility Code for 35C or 40X bit formats only and which are only encoded by Allegion. For other formats, there is no guarantee of not duplicating Badge ID numbers with other users. It will be for the sole purpose of tracking numbers through Allegion.

Company Contact Information
	Company Name
	Address
	City, State, Zip
	Primary Contact*
	Title
	Phone Number
	Email Address
	*This person will be the main contact for information and assignment of Approved Purchasers regarding this account. The Authorization Form must be completed and submitted with this application.
	CardTrax™ Programming Information
	Bit Format**
	Facility Code***
	Start Number
Bit Formats*	Facility Code Range	Number Range	Prox	Smart
26A	0-255	0-65,535	Y	Y
35C (125 kHz Standard)	0-4,095	0-1,048,575	Y	Y
37X	0-65,535	0-524,288	Y	Y
40X (13.56 MHz Standard)	0-1,023	0-268,435,455	N	Y
	*All bit formats are available through CardTrax™. We guarantee no duplication of credential numbers with a unique facility code for 35C or 40X bit formats only and which are only encoded by Allegion. *Disclaimers* * For restricted CardTrax™ accounts (35C or 40X) we ask that you have continuous activity to maintain this service. ****Gaps in Badge ID sequence may occur when there are order edits, deletions or entry errors.
	CT Account Number (internal use only)

CARDTRAX™ Application

$CARDTRAX^\{\backslash mathsf\{TM\}\}$

Authorization Form

New CardTrax™ accou	unt	Edit to Existing CardTrax™ Account CT Number:
	Authorized Account Manager
Check this box if sam	ne as "Primary Contact" on Application Form; otherwise complete this s	section:
Company Name
Address
City, State, Zip
Contact Name
Phone Number
Email Address
	Approved Purchasers (Direct Account Partner of Allegion) mini	mum of one required:
Company Name
Contact Name
Company Name
City, State, Zip
Title
Phone Number
Email Address
Company Name
Address
City, State, Zip
Contact Name
Title
Phone Number
lau	uthorize the Approved Purchaser(s) listed above to order credentials using the sp	pecified CardTrax™ account number.
Printed Name + Signature (A	Authorized Account Manager)	Date
	CT Account Number (in	ternal use only)

Print Scheme Options (PS#)

ID numbers are printed on the back of the cards. All the cards shown are picture samples for ID number locations only. Other variables on the card, such as logo and slot punch location are dependent on choices indicated on the Credential Order Form. Please indicate the print scheme option you would like on your purchase order. If a print scheme isn't selected, the default 01 print scheme will be provided..

01 (Default)

ISO card with Technology, Bit Format, Order Number and Badge ID, bottom right hand corner

02

ISO card with Badge ID, bottom right hand corner

03

ISO card with Technology, Bit Format, Order Number and Badge ID, upper right hand corner

04

ISO card with Badge ID, upper right hand corner

05

ISO card with Technology, Bit Format, Order Number and Badge ID, upper left hand corner

06

ISO card with Badge ID, upper left hand corner

07

ISO card with Technology, Bit Format, Order Number and Badge ID, bottom left

08

ISO card with Badge ID, bottom left hand corner

09

Clamshell card with Technology, Bit Format, Order Number and Badge ID, bottom right hand corner

10

Clamshell card with Badge ID, bottom right hand corner

11

Clamshell card with Technology, Bit Format, Order Number and Badge ID, bottom left hand corner

12

Clamshell card with Badge ID, bottom left hand corner

13

Clamshell card with existing supplier part number, 88I, lower left hand corner

14

ISO card with existing supplier part number, 88I, lower right hand corner

15

No numbers printed

KEY
T	Technology
P	Proximity
S	Smart
C	Combo/Multi
FFF	Format Number (Fixed)
SSSSS	Order Number (Fixed)
BID	Badge ID Number
PN	Existing Printed PN from Supplier

Custom Artwork

Custom Artwork

Custom cards offer a way to stand out from the crowd and provide a way to creatively express features of your business. Display your company logo, showcase unique artwork, or convey a simple sales message with a custom credential.

How Does it Work?

• 1) Contact Inside Sales at 855-248-0302 or customartwork@allegion.com to get started. Art requirements will be provided to start the process.
• 2) Once your team has reviewed the requirements and designed its artwork, submit your order request and artwork to customartwork@allegion.com. Include reference to CMYK in the art template. The artwork should be submitted as an AI, EPS or PDF file.
• 3) The order request information should include the quantity, base card technology and any special requirements (external marking, magstripe programming, etc). The initial order must be for 1,000 cards or more after that a recurring minimum quantity of 500 cards per order. There will be a minimum artwork proof set-up fee of $450.
• 4) A quote and proof will be created and emailed for your review and approval. Upon customer approval, a custom artwork number to be included on your PO will be assigned (CA-xxxx).
• 5) This CA number will be valid for one year. If no additional orders are placed within 12 months, there will be another minimum artwork proof set-up fee of $450.
• 6) Next, simply submit your PO with the assigned custom artwork number and our team will begin producing your cards.
• 7) There is a 6 week to 8 week lead-time on all orders from when the PO (not the order request) gets submitted. *** (during peak high demand periods the lead-time may be as long as 10 weeks therefore advise your client to order well ahead of their required deployment date.).

Notes: Available for all ISO and clamshell cards Design must fit within space allotted

Contact Inside Sales at 855-248-0302 or customartwork@allegion.com with any questions throughout the process.

NETWORKED READERS - TABLE OF CONTENTS
READERS OVERVIEW	38
HOW TO ORDER	39
READERS Multi-Technology Readers Multi-Technoogy Mzgnetic Strip Readers Smart Card Readers Proximity Readers	40 40 40 40 40
READER PARTS Reader Replacement Parts Reader Covers	41 41 41
ENROLLMENT READERS	42
READER AND KEYPADS - OTHER Magnetic Strip Readers Enrollment Readers for Schlage Express iButton Readers Screamble Keypads Electronic Keypads Offline Keypads	43 43 43 43 44 44 44

CONTACT INFORMATION FOR SCHLAGE READERS AND CREDENTIALS

Email Order To: Readers.Credentials.Orders@allegion.com

Fax Order To: 866-954-1779 Payment Address: XceedID Corporation

15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service: Technical Support:
Order Status, Credit Returns of Non-Defective Products, General Sales Questions	Technical Questions/Issues, Returns of Defective Products, Repairs
Email Requests to: Sales Support contact information on Page 2.	Contact For Technical Assistance: Readers_Credentials_Biometrics_TechProdSupport@allegion.com
Inside Sales 855-248-0302
General Sales Questions, Pre-printed cards, CardTrax Accounts ElectronicInsideSales@allegion.com

For Credentials Warranty Information please see page 11.

Readers Overview

With our versatile multi-technology, smart and proximity reader options, we have a solution for any physical access control need. Our comprehensive, yet simple reader line-up is suitable for any new smart or proximity installation.

Schlage Multi-Technology Readers

Schlage multi-technology readers are ideal for any new smart, proximity, or magnetic stripe installation—or as a cost effective way to migrate from existing magnetic stripe or proximity to smart technology.

• 125 kHz proximity and 13.56 MHz contactless smart card technology in one reader
• Magnetic stripe option, reads track 2 default, tracks 1 and 3 configurable
• Reads ISO 14443 A/B and 15693 credentials
• Compatible with:
• Schlage smart credentials using MIFARE Classic®, MIFARE Plus® and MIFARE® DESFire® EV1
• Schlage mobile credentials using NFC technology
• Most popular proximity credentials including Schlage, XceedID, HID®, GE/Casi ProxLite®, AWID®, and LenelProx®
• CSN of most existing 13.56 MHz credentials
• Magnetic stripe
  • Wiegand interface (RS-485 available)
  • FIPS 201-2 compliant
  • Tri-state LED (red, green, amber) and audible status alert
  • Standard color is black. Gray, brown and cream colors are available, longer lead times may apply.

Schlage Smart Readers

The Schlage smart mini-mullion reader is an excellent option for a smart-only installation.

• 13.56 MHz single frequency contactless smart card technology
• Reads ISO 14443 A/B and 15693 credentials
• Compatible with:
• Schlage smart credentials using MIFARE Classic®, MIFARE Plus® and MIFARE® DESFire® EV1
• Schlage mobile credentials using NFC technology
• CSN of most existing 13.56 MHz credentials
  • Wiegand interface
  • FIPS 201-2 compliant
  • Tri-state LED (red, green, amber) and audible status alert
  • Standard color is black. Gray, brown and cream colors are available, longer lead times may apply.

Schlage Proximity Readers

This mini-mullion reader is a great solution for proximity-only facilities.

• 125 kHz single frequency proximity technology
• Compatible with:
• Most popular proximity credentials including Schlage, XceedID, HID®, GE/Casi ProxLite®, AWID®, and LenelProx®
  • Tri-state LED (red, green, amber) and audible status alert
  • Wiegand interface
  • Standard color is black. Gray, brown, and cream colors are available, longer lead times may apply.

Allegion, the Allegion logo, and Schlage are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners.

How to Order:

Follow the steps below to build the full part number for the reader you wish to order. Use the sample below to determine how to write your part number on your PO.

1. Choose Your Reader Model

See page 40 for available models.

2. RS-485 Capability

Schlage readers (multi-technology only) have been designed with an option to interface directly with controllers that utilize RS-485 protocol. RS-485 is a communication protocol that allows a two way communication between the reader and the panel, for example OSDP protocol.

To order readers with RS-485 capability, add "-485" after the reader model number. If you are using the standard Wiegand protocol, do not add a suffix (leave blank).

3. Reader Color Options

Schlage Readers are available in four color options. Add the appropriate suffix after the reader model number and RS-485 option (if applicable).

Black (standard) – do not add a color suffix, leave blank Cream – add "C" Warm Tone Brown – add "BN" Cool Tone Gray – add "G"

If the RS-485 option is chosen, add the color suffix after "-485." If the RS-485 option is not chosen, add the color suffix after the reader part number (ex: MT11BN).

4. PIV Format

75-bit PIV is the default format for all Schlage readers. Other format requirements are determined by the access control system, agency requirements, and customer specifications. The other available formatting options are listed below. Add "PIV" and the format number after the reader model number, RS-485 option (if applicable), and color suffix (if applicable).

Format Number	Bit Information
1	75-bit PIV
2	58-bit TWIC/CAC
3	200-bit FASC-N
4	64-bit (BCD) TWIC/CAC
5	83-bit TWIC/CAC
6	66-bit (58-bit format +TSM) TWIC/CAC
7	64-bit (58-bit format (no parity) + TSM) TWIC/CAC
8	91-bit (83 bit format + TSM) TWIC/CAC
9	40–bit BCD
10	40-bit reversed BCD
11	64-bit BCD
12	64-bit reversed BCD
13	128-bit BCD
14	128-bit reversed BCD
15	58-bit HSE

If you need assistance in determining the PIV format for your facility, please contact your Allegion sales representative directly.

5. Special Instructions

Please specify any other special instructions directly on your PO.

Readers

Schlage Multi-Technology Readers

MT11	Multi-Technology Reader – Mullion Mount Dimensions: 5.91" x 1.72" x 0.81". Power required: 5-16 VDC	$369.00
MT15	Multi-Technology Reader – Wall Mount Dimensions: 5.1" x 3.25" x 0.76". Power required: 5-16 VDC	$369.00
MTK15	Multi-Technology Reader – Wall Mount with Keypad Dimensions: 5.1" x 3.25" x 0.76". Power required: 5-16 VDC	$591.00
MT11-485	Multi-Technology Reader – Mullion Mount Dimensions: 5.91" x 1.72" x 0.81". Power required: 5-16 VDC	$369.00
MT15-485	Multi-Technology Reader – Wall Mount Dimensions: 5.1" x 3.25" x 0.76". Power required: 5-16 VDC	$369.00
MTK15-485	Multi-Technology Reader – Wall Mount with Keypad Dimensions: 5.1" x 3.25" x 0.76". Power required: 5-16 VDC	$591.00

Schlage Multi-Technology Magnetic Stripe Readers

MTMS15	Multi-Technology Magnetic Stripe Reader – Wall Mount Dimensions: 4.43" x 5.17" x 1.15". Power required: 5-16 VDC
MTMSK15	Multi-Technology Magnetic Stripe Reader – Wall Mount with Keypad Dimensions: 4.43" x 5.17" x 1.15". Power required: 5-16 VDC	$903.00
MTMS15-485	Multi-Technology Magnetic Stripe Reader – Wall Mount Dimensions: 4.43" x 5.17" x 1.15". Power required: 5-16 VDC	$668.00
MTMSK15-485	Multi-Technology Magnetic Stripe Reader – Wall Mount with Keypad Dimensions: 4.43" x 5.17" x 1.15". Power required: 5-16 VDC	$903.00

Schlage Contactless Smart Card Readers

SM10	Schlage Contactless Smart Card Reader – Mini-Mullion Mount	$179.00
	Dimensions: 4.26" x 1.72" x 0.81". Power required: 5-16 VDC

Schlage Proximity Readers

PR10	Proximity Reader – Mini-Mullion Mount	$179.00
	Dimensions: 4.26" x 1.72" x 0.81". Power required: 5-16 VDC

Reader Parts

Reader Replacement Parts

Pigtail – 18 inch
	$44.70
	$12.80
	$128.00
	$26.70
	$26.70
	$26.70
	$53.60
	$33.40
	$33.40
	$33.40
	Magnetic Stripe Read Head Mini-Mullion Backplate Single Gang Backplate Mullion Backplate Magnetic Stripe Backplate Cosmetic Backplate Cover – Mini Mullion /Mullion (6.70" x 2.50") Cosmetic Backplate Cover – Single Gang (5.65" x 3.85") Cosmetic Backplate Cover – Mid-Range (6.45" x 5.50")

Reader Covers

• Standard color for readers is black. Gray, brown and cream colors are available, longer lead times may apply.

	• Standard color for readers is black. Gray, brown and cream colors are available, longer lead times may apply.
23846520	Mini-Mullion – Black	$26.70
23846546	Mini-Mullion – Warm-Tone Brown	$26.70
23846538	Mini-Mullion – Cool-Tone Gray	$26.70
23920648	Mini-Mullion – Cream	$26.70
23846553	Mullion – Black	$26.70
23846579	Mullion – Warm-Tone Brown	$26.70
23846561	Mullion – Cool-Tone Gray	$26.70
23920655	Mullion – Cream	$26.70
23846587	Single Gang – Black	$26.70
23846603	Single Gang – Warm-Tone Brown	$26.70
23846595	Single Gang – Cool-Tone Gray	$26.70
23920598	Single Gang – Cream	$26.70
23846611	Single Gang with Keypad – Black	$26.70
23846637	Single Gang with Keypad – Warm-Tone Brown	$26.70
23846629	Single Gang with Keypad – Cool-Tone Gray	$26.70
23920606	Single Gang with Keypad – Cream	$26.70
24064149	Magnetic Stripe – Black	$53.60
24064156	Magnetic Stripe – Warm-Tone Brown	$53.60
24064172	Magnetic Stripe – Cool-Tone Gray	$53.60
24064164	Magnetic Stripe – Cream	$53.60
24064198	Magnetic Stripe with Keypad – Black	$53.60
24064206	Magnetic Stripe with Keypad – Warm-Tone Brown	$53.60
24064222	Magnetic Stripe with Keypad – Gray	$53.60
24064214	Magnetic Stripe with Keypad – Cream	$53.60

Enrollment Readers

Enrollment Readers

MT20	USB/MIFARE/EV1 Enrollment Reader	$618.00
MT20W	USB/WIFI/MIFARE/EV1 Enrollment, Read-Write Reader	$618.00

Readers - Other

Magnetic Stripe Readers

SMR5	Magnetic Stripe Card Reader Weatherized for outdoor use with a cast metal housing and optional wall plate. The SMR5 has one LED. Standard color is black, also available in Beige. Standard is 5 VDC. Must specify for 12 VDC.	$474.00
SMR10	Magnetic Stripe Card Reader Weatherized for outdoor use with a cast metal housing and optional wall plate. The SMRID has two LED's. Standard color is black, also available in Beige. Standard is 5 VDC. Must specify for 12 VDC.	$637.00
SMR20	Magnetic Stripe Card Reader with Keypad Weatherized for outdoor use with a cast metal housing and optional wall plate. The SMR20 has integrated membrane keypad. AVAILABLE IN BEIGE ONLY. Standard is 5 VDC. Must specify for 12 VDC.	$924.00
SWP10	Wall Plate for Mercury Magnetic Stripe Card Reader Metal Wall Plate (Beige or Black) for MR5, MR10 and MR20 magnetic card readers.	$27.60
SWS10	Weather Shield for SMR5, SMR10 and SMR20 Readers Brushed Stainless vertical mount.	$104.00

Enrollment Readers for Schlage Express

CRM2	Magstripe Enrollment Reader for Schlage Express	$730.00
CRP2	Proximity Enrollment Reader for Schlage Express	$589.00

iButton Readers

SRT-100	iButton Mullion Mount Reader	$959.00
	The SRT100 iButton Mullion-Mount Reader provides solid construction with a 1/4" thick brushed anodized
	aluminum face plate and stainless steel read head. Bi-color LED and Sonalert provide users with both visual
	and audible indicators. 26 bit Wiegand output.

Keypads

Scramble Keypads

SERIII-W-GR	Scramble Keypad (Gray) The keypad is designed to prevent onlookers from detecting the code being entered. Each key is lighted by an LED with a different set of numbers every time the keypad is used. Weatherized for outdoor applications with a Wiegand output. Power requirements: 8-14 VDC. Standard color is gray. Also available in black (SERIII-W-BLK).	$2,296.00
SMK-2-GR	Scramble Keypad Surface Mount Kit (Gray) Surface Mount Kit and tamper proof screws. Standard color is gray. Also available in black (SMK-2-BLK).	299.00
SSMK-2-ADA	Scramble Keypad Surface Mount Kit (ADA Compliant) Surface Mount Kit and tamper proof screws. ADA compliant.	575.00
PMK-2-GR	Panel Mount Kit (Gray) Standard color is gray. Also available in black (PMK-2-BLK).	242.00
SPMK-2-GR	Panel Mount Kit w/ Steel Back Box (Gray) Steel back box with tamper proof screws. Standard color is gray. Also available in black (SPMK-2-BLK).	262.00

Note: : Mounting Kits are sold separately and required for usage with Scramble Keypads.

Electronic Keypads

SEKPDMWG	Electronic Keypad (Mullion Mount) Stainless faceplate with keypad. Weatherized for outdoor use - 2x6 Matrix (5 or 12 VDC) Wiegand output.	604.00
SEKPDWG	Electronic Keypad Stainless faceplate with keypad. Weatherized for outdoor use - 3x4 Matrix (5 or 12 VDC) Wiegand output.	876.00
SEKPD8B	Electronic Keypad Stainless faceplate with keypad. Weatherized for outdoor use - 3x4 Matrix (5 or 12 VDC) Wiegand output, 8 bit word.	856.00

Offline Keypads

KP232	Mullion-mount Keypad Mullion style, back lighted hard plastic keys, weather resistant; indoor/outdoor, doorbell key, main relay and three independent outputs, secured installation, aluminum finish.
KP212	Mullion-mount Keypad Back lighted hard plastic keys, weather resistant; indoor/outdoor, doorbell key and relay, secured installation, aluminum finish.	$778.00
KP2000E	Flush-mount Backlit Access Control Keypad Indoor/outdoor design, single gang, illuminated backlit keys, and sounder, Wiegand and Secured Series outputs, for stand-alone applications, 5 year warranty.	$510.00
KP2000EM	Flush-mount Durable Metal Access Control Keypad Indoor/outdoor single gang, durable metal trim, heavy duty metal keys with Braille, and sounder, Wiegand and Secured Series outputs, for stand-alone applications, 5 year warranty.	$712.00

MULTI-FAMILY - TABLE OF CONTENTS FINISH CODES AND DESCRIPTIONS 45 SCHLAGE CONTROL™ SMART INTERCONNECT LOCKS 46 Standard Features 46 Specifications 46 How To order 46 Latch 47 Handing 47 Deco Trim 47 Strike Combinations 47 Deadbolt Strike Options 47 Deadlatch Strike Options 47 SCHLAGE CONTROL™ SMART DEADBOLTS 48 Standard Features 48 Specifications 48 How To Order 48 Latch 49 BE467F Strike Options 49 Thick Door Kit 49 Screw Packs 49 ELECTRONIC LOCKING SYSTEMS 50 Schlage Control™ Smart Locks 50 Schlage Smart Credential Using MiFare® Classic 50 Multi-Tech Technology: Proximity and Schlage Credentials Using MIFARE® Classic 50 Credential Enrollment Reader 50

Finish Codes and Descriptions

Code		Description
619	(US 15)	Satin Nickel
622	(US19)	Matte Black
625	(US 26)	Bright Chromium Plated
626	(US 26D)	Satin Chrome
643e	(US 11)	Aged Bronze

^* Non-Standard finishes are not available. Available in split finish and/or split lever options for no additional charge.

CONTACT INFORMATION FOR LE SERIES LOCKS & DEVICES

Payment Address: Schlage Electronic Security

15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service: Technical Support:
Order Status, Credit Returns of Non-Defective	Technical Questions/Issues, Returns of
Products, General Sales Questions	Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:
Order_Entry_Schlage_Commercial@allegion.com	Electronic_Lock_TechProdSupport@allegion.com

Schlage Control™ Smart Interconnect Locks

FE410 withwith Addison trim with Accent lever

Standard Features

• ⁿ Keyless, no cylinder design 100% bump and pick-proof
• ⁿ Modern credentials smart credential and/or phone as key
• ⁿ Wireless freedom control and program by phone
• ⁿ Up to 500 users per lock
• ⁿ Audit trail reports up to 1,000 events
• ⁿ Fits standard door prep

• ⁿ 1 year battery life with BLE mobile credential capability enabled. 1.5 year battery life without BLE mobile credential capability enabled.
• ⁿ Full suiting with Schlage mechanical locks
• ⁿ Single motion egress
• ⁿ ADA compliant design
• ⁿ Uses ENGAGE™ Technology
• ⁿ See page 42 for information on the MT20W Credential Enrollment Reader

	Specifications

Latch: 1" x 2 1/4" square and round corner faceplate

(square corner standard, round corner included in

package) 1" edge bore required

Strikes: 1 1/8" x 2 3/4", square corner, no box, latch strike

Backset: Adjustable backset, fits 2-3/8" to 2 3/4" backsets

Door Range: 1 3/8" to 1 3/4" (thick door kit available - up 2") Battery: 4-AA batteries included, (If loss of battery power

occurs, a 9V battery can be used to jump start the lock and provide access with an assigned

credential.)

Construction: All-metal chassis and escutcheons

Bore: 2 1/8"

Credentials: Supports Schlage MIFARE classic, Schlage MIFARE

plus, Schlage DESFire EV1 (sold separately). Please

refer to the Credential Section of the Allegion Electronic Security Price Book.

Stile Width: Minimum 4 1/2" stile for 2 3/8" backset, minimum

5" stile for 2 3/4"

Return to Door: Saturn (SAT), Neptune (NEP), Boardwalk (BRK)

and Longitude (LON) are return to door code

compliant

Center to Center: Fits 4" or 5 1/2" center to center door preps

-orderable options (Please specify when ordering)

Certifications: 90-minute UL Listed A 156.36 Grade 2 ANSI/BHMA certified; Canada UL 20-minute wood door rated.

Approved for use where the exterior escutcheon

only is exposed to the outdoors.

1. Select Lock Model

Part No.	Description
FE410F Schlage Control Smart Interconnect, UL Listed, 90 minutes		$659.00
2. Select Design Style Style/Description		Price (ea.)
(ADD) Addison		n/c
(GRW) Greenwich		n/c

3. Select Interconnect Type

Style	Description	Price (ea.)
4"	For doors with 4" bore hole spacing (40)	n/c
5-1/2"	For doors with 5 1/2" bore hole spacing (55)	n/c

4. Design - Select Lever Style And Finish

Style / Description	619 - Satin Nickel	622 - Matte Black	625 - Bright Chrome	626 - Satin Chrome	716 - Aged Bronze
ACC / Accent	n/c	n/c	n/c	n/c	n/c
VLA / Avila	n/c	Not Available	n/c	n/c	n/c
BIR / Birmingham	n/c	Not Available	n/c	Not Available	n/c
BRW / Broadway	n/c	n/c	n/c	n/c	n/c
BRK / Boardwalk	n/c	n/c	n/c	n/c	n/c
ELA / Elan	n/c	n/c	n/c	n/c	n/c
JAZ / Jazz	n/c	n/c	n/c	n/c	n/c
JUP / Jupiter	n/c	n/c	n/c	n/c	n/c
LAT / Latitude	n/c	n/c	n/c	n/c	n/c
LON / Longitude	n/c	n/c	n/c	n/c	n/c
MNH / Manhattan	n/c	Not Available	n/c	n/c	Not Available
NEP / Neptune	n/c	n/c	n/c	n/c	n/c
NBK / Northbrook	n/c	Not Available	Not Available	Not Available	Not Available
SAC / Sacramento	n/c	Not Available	n/c	n/c	n/c
SAT / Saturn	n/c	n/c	n/c	n/c	n/c

Latch

Part No.	Description	Price (ea.)
12-356	Combo latch, Dual option (sq + rd), Non UL bolt, UL latch - STANDARD	Not Sold Separately
Handing		Price (ea.)
Left	STANDARD - Can be changed to Right handed in the field	n/c
Deco Trim		Price (ea.)
06-219	STANDARD - ADD or GRW depending on which style is selected above	n/c

Strike Combinations

Part No.	Description	Price (ea.)
10-121	STANDARD - Combo Strike, Square Corner (10-094 & 10-026)	n/c
10-109	10-094 & 10-001	n/c
10-119	10-081 & 10-001	n/c
10-122	10-116 & 10-027	n/c
10-123	10-092 & 10-027	n/c
10-124	10-095 & 10-027	n/c

Deadbolt Strike Options

Part No.	Description	Price (ea.)
10-094	Square Corner Strike, 1 1/8" x 2 3/4" - STANDARD	$12.20
10-092	1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"	7.90
10-095	Square corner, full lip, no box, 1 5/8" x 2 1/4"	7.90
10-112	Metal dust box with screws	11.70

Deadlatch Strike Options

Part No.	Description	Price (ea.)
10-026	Square corner, full lip, no box, 1 5/8" x 2 1/4" - STANDARD	$7.60
10-001	Square corner, T-strike, box, 1 1/8" x 2 3/4"	6.50
10-027	1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"	7.60

Thick Door Kit

Part No.	Description	Price (ea.)
47244555	For doors between 1 3/4" and 2"	$24.90

The Schlage Control Interconnect Lock uses the same Thick Door Kit as the Deadbolt. However, due to the latch assembly it should only be used on doors between 1 3/4" and 2".

Screw Packs

Part No.	Description	Price (ea.)
47250323	Security Screws - Optional Security torx screws	$7.20
47244558	FE410 screw pack	7.20

For Screw Packs, specify finish option (619, 622, 625, 626 or 716)

Schlage Control™ Smart Deadbolts

Greenwich (GRW)

BE467 Addison (ADD)

Product Identification

BE	467	F
Lock	Function	90 Minute UL

Standard Features

• ⁿ Keyless, no cylinder design 100% bump and pick-proof
• ⁿ Modern credentials smart credential and/or phone as key
• ⁿ Wireless freedom control and program by phone
• ⁿ Up to 500 users per lock
• ⁿ Audit trail reports up to 1,000 events
• ⁿ Fits standard door prep

• ⁿ 1 year battery life with BLE mobile credential capability enabled. 1.5 year battery life without BLE mobile credential capability enabled.
• ⁿ Full suiting with Schlage decorative mechanical locks
• ⁿ ADA compliant design
• ⁿ Uses ENGAGE™ Technology
• ⁿ See page 42 for information on the MT20W Credential Enrollment Reader

	Specifications

Latch: 1" x 2 1/4" square and round corner faceplate (round

corner standard, square corner included in package)

1" edge bore required

Strikes: 1 1/8" x 2 3/4", round corner, no box, latch strike Backset: Adjustable backset, fits 2 3/8" to 2 3/4" backsets Door Range: 1 3/8" to 1 3/4" (thick door kit available - up 2 1/4")

Hole Distance: Minimum 4" center-to-center distance between

cross bore holes

Battery: 4-AA batteries included, (If loss of battery power

occurs, a 9V battery can be used to jump start the lock and provide access with an assigned

credential.)

Construction: All-metal chassis and escutcheons

Bore: 2 1/8"

Credentials: Supports Schlage MIFARE classic, Schlage

MIFARE plus, Schlage DESFire EV1 (sold separately). Please refer to the Credential Section of the Allegion Electronic Security Price

Book.

Stile width: Minimum 4 1/2" stile for 2 3/8" backset

minimum 5" stile for 2 3/4"

Certifications: 90-minute UL Listed A 156.36 Grade 2 ANSI/

BHMA certified; Canada UL 20-minute wood door rated. Approved for use where the exterior escutcheon only is exposed to the outdoors.

1. Select Lock Model

Part No.	Description	Price (ea.)
BE467F	Schlage Control Smart Deadbolt, UL Listed, 90 minutes	$445.00
2. Select Design Style
Style/Description		Price (ea.)
(ADD) Addison		No Charge
(GRW) Greenwich		No Charge
3. Select finish style
Finish/Description		Price (ea.)
619 / Satin Nickel		No Charge
622 / Matte Black		No Charge
625 / Bright Chrome		No Charge
626 / Satin Chrome		No Charge
716 / Aged Bronze		No Charge

Latch

Part No.	Description	Price (ea.)
12-398	BE467F 90 Min UL Deadbolt Latch Dual Option (sq+rd) - STANDARD	Not Sold Separately

BE467F Strike Options

Part No.	Description	Price (ea.)
10-116	Round Corner Strike, 1 1/8" x 2 3/4" - STANDARD	n/c
10-094	Square Corner Strike, 1 1/8" x 2 3/4"	n/c
10-095	Square Corner Full Lip Strike, 1 5/8" x 2 1/4" (Lip Length: 1 1/8")	n/c
10-092	Round Corner Full Lip Strike, 1 5/8" x 2 1/4" (Lip Length: 1 1/8")	n/c

Thick Door Kit

Part No.	Description	Price (ea.)
47244555	For doors between 1 3/4" and 2 1/4"	$24.90

The Schlage Control Deadbolt uses the same Thick Door Kit as the Interconnect. However, due to the differences in latch assemblies, the Deadbolt can accommodate doors up to 2-1/4" in thickness.

Screw Packs

Part No.	Description	Price (ea.)
47250323	Security Screws - Optional Security torx screws	$7.20
47244557	BE467 screw pack	7.20

For Screw Packs, specify finish option (619, 622, 625, 626 or 716)

Electronic Locking Systems

Greenwich Addison

Schlage Control™ Smart Locks

Product	Finish	Latch	Strike	Lever Style	Price Each
BE467F GRW	619	12-398	10-116	N/A	$445.00
BE467F GRW	626	12-398	10-116	N/A	445.00
BE467F ADD	619	12-398	10-116	N/A	445.00
BE467F ADD	626	12-398	10-116	N/A	445.00
FE410F GRW	619	12-356	10-121	Latitude	659.00
FE410F GRW	626	12-356	10-121	Latitude	659.00
FE410F ADD	619	12-356	10-121	Latitude	659.00
FE410F ADD	626	12-356	10-121	Latitude	659.00

Note: FE410 locks are 5.5" center-to-center.

Schlage Smart Credentials using MIFARE® Classic

Product	Type	Description	Price (ea.)	Min. Order
9651	Keyfob	Schlage MIFARE Smart Card 1K bit Keyfob	$7.90	100
9651T	Thin Keyfob	Schlage MIFARE Smart Card 1K bit thin Keyfob	$8.10	100

Multi-Tech Technology: Proximity and Schlage Credentials using MIFARE® Classic

Product	Type	Description	Price (ea.)	Min. Order
9691T	Thin Keyfob	Proximity and Schlage Smart Card combo 1K byte/8K bit ISO thin Keyfob	$10.60	100

Credential Enrollment Reader

Product	Description	Price Each
MT20W	Schlage Credential Enrollment Reader	$618.00

LE WITH ENGAGE TECHNOLOGY - TABLE OF CONTENTS
FINISH CODES AND DESCRIPTIONS	51
EXPLODED VIEW	52
HOW TO ORDER	53
STANDARD FEATURES	54
LE FUNCTIONS	55
LEVER DESIGNS	56
LEVER SUITING	58
CYLINDER COMPATIBILITY	59
ORDERING GUIDE	61
LE GREENWICH SECTIONAL	62
LE ADDISON	64
LE PARTS	66
LE ACCESSORIES	70

	Finish Codes and Descriptions
Code		Description
605	(US 3)	Bright Brass
606	(US 4)	Satin Brass
612	(US 10)	Satin Bronze
619	(US 15)	Satin Nickel
622	(US19)	Matte Black
625	(US 26)	Bright Chromium Plated
626	(US 26D)	Satin Chrome
626AM		Antimicrobial Coating
		on Satin Chromium
643e	(US 11)	Aged Bronze

CONTACT INFORMATION FOR LE SERIES LOCKS & DEVICES

Payment Address: Schlage Electronic Security 15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service:	Technical Support:
Order Status, Credit Returns of Non-Defective	Technical Questions/Issues, Returns of
Products, General Sales Questions	Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:
Order_Entry_Schlage_Commercial@allegion.com	Electronic_Lock_TechProdSupport@allegion.com

GRADE 1 MORTISE LEVERED LOCK

LE - BMS - GRW - P - 03 - 626 - 00A - – - 612 - – - LH - 10-136 - 134 - S123 - – 1. Series: 2. Chassis/Function: BMS Mobile enabled mortise with LED Indicator BMB Mobile enabled mortise with push button and LED BMD Mobile enabled mortise deadbolt with LED MS Mortise with LED indicator MB Mortise with push button and LED MD Mortise Deadbolt with LED 3. Style: GRW Greenwich sectional with rose ADD Addison escutcheon 4. Cylinder Type: P Mortise cylinder, Schlage 6-pin For all options see LE ordering pages 5. Outside Lever:* 03 Suites with Tubular style LAT Latitude For all options see LE ordering pages *To add tactile warning, use prefix 8. Example: 803 6. Outside Finish: 626 Satin Chrome 605 Bright Brass 606 Satin Brass 612 Satin Bronze 619 Satin Nickel 622 Matte Black 625 Bright Chrome 643e Aged Bronze 626AM Satin Chrome (Antimicrobial Coating) 7. Outside Rose: Specify only for Greenwich Trim 00A 2-1/8" (54 mm) diameter (Standard) 00B 2-9/16" (65 mm) diameter 00C 2-5/8" (66 mm) diameter with bevel AVA Decorative rose 2-5/8" (66 mm) diameter, supports ACC lever only MER Decorative rose 2-5/8" (66 mm) diameter, supports MER lever only 8. Inside Lever: Specify only if different from outside lever 3 Suites with Tubular style LAT Latitude For all options see LE ordering pages 9. Inside Finish: Specify only if different from outside finish See options under 6 above 10. Inside Rose: Specify only for Greenwich Trim and only if different from Outside Rose See options under 7 above 11. Handing: RH Right Handed (Standard) LH Left Handed RHR Right Handed Reverse LHR Left Handed Reverse 12. Strike Plate Lip Length: 10-136 1-3/16" lip length (Standard for MS/MB) 10-136-112 1-1/2" lip length For all options see LE ordering pages 13. Door Thickness 134 1-3/4" (Standard) Options available up to 2-1/4" thickness - see LE ordering pages 14. Keyway Type S123 Everest 29 S (Standard) For all options see LE ordering pages 15. Additional Options	How to Order:	REQUIRED FIELDS	FACTORY DEFAULT AND OPTIONS

How to Order

Standard Features

Certification ANSI/BHMA Certified A156.25-2013 (Indoor/Outdoor), ANSI/BHMA Certified

A156.13-2012, Series 1000, Grade 1 UL 294, ULC S319, UL 10C 3-hour rated

Case Size 4-7/16" x 6-1/16" x 1"

Armor Front 1-1/4" x 8"

Deadbolt 1" throw stainless steel

Latchbolt 3/4" throw stainless steel with anti-friction tongue Strike 1-1/4" x 4-7/8", square corner, 1-3/16" lip with box and DPS

Backset 2-3/4"

Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)

Door Range 1-3/4" door thickness standard (can be ordered to accommodate doors 1-3/4" to 2-1/4" thick)

Keys Two nickel silver cut keys per lock, 6-pin, S123 section

Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. Engineering specials are denoted by a part number beginning with "X" and are not subject to standard discounting. 5. 6 denotes a lock or part that requires an extended lead time. 6. I denotes a handed product and requires handing to be specified. 7. For all restricted keyways (Everest B, D, 29R, and 29T, also, Quad, Numbered, and Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 9. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA (keyed alike), KD (keyed different) and 0-bitted product and S145 for factory managed masterkey systems. 10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 12. Locks specified with "C" keyway and KD or 0-bitted will receive 6-pin cylinders (keyed 5) with 5-pin keys. 13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 14. Conventional cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 15. Available plug face finishes are 606, 622, 626 and 643e

Function Addison Escutcheon Shown

BMS* and MS - Mortise with LED Indicator Storeroom Lockset is normally secure. Inside lever always allows free egress. Valid toggle credentials on the exterior may be used to change to a passage or secured status. A mechanical key will momentarily unlock the door. BMB* and MB - Mortise with Interior Push Button and LED Office Lockset is normally secure. Inside lever always allows free egress. Interior pushbutton on inside housing may be used to select a passage or secured status. Meets need for lockdown function for safety and security. NOTE: Valid toggle credentials on the exterior may also be used to change status. Has interior pushbutton (IPB). Privacy Lockset is normally secure. Inside lever always allows free egress. Interior pushbutton on inside housing may be used to select a privacy status. The interior pushbutton will disable normal electronic access from the exterior. Opening the door or pressing the interior pushbutton a second time on the inside housing deactivates the privacy status. Has interior pushbutton (IPB). Apartment Lockset is normally secure. Inside lever always allows free egress. Interior pushbutton on inside housing may be used to select a passage or secured status. Opening the door or pressing the interior pushbutton causes the lockset to toggle unsecured. While toggled unsecured, the lockset can only be secured while the door is closed by pressing the interior pushbutton or using a normal credential on the exterior. Normal electronic access from the exterior is always allowed. Has interior pushbutton (IPB). BMD* and MD - Mortise Deadbolt with LED Privacy Lockset is normally secure from exterior. Inside lever always allows free egress (if deadbolt is extended, inside knob/lever will simultaneously retract latchbolt and deadbolt). The deadbolt may be used to select a privacy status. With deadbolt extended, normal electronic access from the exterior will be disabled. Opening the door or retracting deadbolt deactivates the privacy status. Apartment Lockset is normally secure from exterior. Inside lever always allows free egress (if deadbolt is extended, inside knob/lever will simultaneously retract latchbolt and deadbolt). The deadbolt may be used to select a passage or secured status. Opening the door or retracting the deadbolt causes the lockset to toggle unsecured. While toggled unsecured, the lockset can only be secured while the door is closed by extending the deadbolt from inside or using a normal credential on the exterior reader. Normal electronic access from the exterior is always allowed. LED

Handing

RH	Right Handed: Hinges on Right Opens Inward
LH	Left Handed: Hinges on left Opens Inward
RHR	Right Handed Reverse: Hinges on Right Opens Outward
LHR	Left Handed Reverse: Hinges on Left Opens Outward

^* Mobile enabled ready. For use with compatible mobile credentials.

Forged Lever Designs

Wrought Rose Designs

Forged Lever Designs

4.5"

4.9"

Wrought Escutcheon Design Tactile Options

Commercial Lever Suiting

Standard Levers

L /LE Mortise	LT Tubular	ND /NDE Cylindrical	AD/CO Series	AL Cylindrical	S Tubular	33A/35A, 94/95, 98/99 Exit Devices (Von Duprin)
01	01					01
02	02					02
03	03	Tubular*	Tubular			03
05	05					05
06	06	Rhodes	Rhodes	Saturn	Saturn	06
07	07	Athens	Athens	Jupiter	Jupiter	07
12	12					12
17	17	Sparta	Sparta	Neptune	Neptune	17
18	18					18
Latitude	Latitude	Latitude				Latitude
Longitude	Longitude	Longitude				Longitude
Omega	Omega	Omega*		Omega		16
Asti	Asti				Flair	Asti
Merano	Merano					Merano
Accent	Accent					Accent
M52*	M52*	Broadway
M81*	M81*	Boardwalk

^* Not available on NDE Series locks. M52 is equivalent to the Broadway lever and M81 to the Boardwalk lever.

M Collection Levers
L /LE Mortise	LT Tubular	33A/35A, 94/95, 98/99 Exit Devices (Von Duprin)
M51	M51	M51
M52	M52	M52
M53	M53	M53
M54	M54	M54
M55	M55	M55
M56	M56	M56
M57*	M57	M57
M61	M61	M61
M62*	M62	M62
M63	M63	M63
M81	M81	M81
M82	M82	M82
M83	M83	M83
M84	M84	M84
M85	M85	M85
ME1	ME1	ME1
ME2	ME2	ME2
ME3	ME3	ME3

^* Not available on LE Series locks.

Cylinder with Compression Ring & Spring

Cylinder

P	With mortise cylinder Schlage Everest 29 S123 6-Pin Keyed different as standard with two keys For master keying, additional charge applies Specify line item 50-210 per master-keyed lock
Z	With mortise cylinder Schlage Everest SL 7-pin - factory master keyed only
L	Less mortise cylinder
R	With cylinder Schlage Everest 29 S123 6-Pin Full Size Interchangeable Core (FSIC) Keyway one bitted as standard with two keys
J	Less cylinder Schlage 6-Pin Full Size Interchangeable Core (FSIC)
T	T Construction core Full Size Interchangeable Core (FSIC)
G	With cylinder Schlage Everest 29 R 7-Pin Small Format Interchangeable Core (SFIC) Factory master keyed with two keys as standard, master keying must be specified
B	Less cylinder Schlage, Falcon, Competitive OEM's 7-Pin Small Format Interchangeable Core (SFIC)
H	Construction core Small Format Interchangeable core (SFIC) A non-refundable handling charge applies
BDC	Disposable core Small Format Interchangeable core (SFIC)

Notes: 1. For P, R, Z and GD, master keyed cylinders can be specified and will be shipped in lock packaging.

• 2. For Master Key System Summary form which should accompany the master keyed order, see Electronic Security price book pages 293-303.
• 3. Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
• 4. For additional assistance on Master Keying as well as restricted keyways please contact your local sales representative.

Cylinder and Length Requirements, LE
Cylinder	Cylinder	Door Thickness (+/- 1/8")
Type		1-3/4"	2"	2-1/4"
Mortise Cylinder	30-021*	1-1/4" (114), 1-3/8" (138), 1-1/2" (112)	1-3/8" (138), 1-1/2" (112), 1-5/8" (158)	1-1/2" (112), 1-5/8" (158), 1-3/4" (134)
FSIC	30-016**	1-1/2" (112)
SFIC	80-108**	1-3/8" (138)	N/A

^{* 112} Standard length will ship with lock

Notes

• 1. Cylinders include compression spring
• 2. Assumes EE (equally extended)
• 3. Door thickness range supported: minimum 1-5/8" to maximum 2-3/8"
• 4. Supports all functions (BMS/MS, BMB/MB, BMD/MD) for both ADD and GRW

^** Product is LESS CORE, See page 68 for pricing

Customer Name:
Customer Address:
Ship To:
Account #:
Quote #:
PO # & Date:
Price book #:
Shipping Instructions:
Requested Ship Date:
Order Written By:
For Further Information Contact (Name, Phone, Fax)

	Quantity	Series 1.	Chassis/Function 2.	Style 3.	Cylinder 4.	Outside Lever 5.	Outside Finish 6.	Outside Rose1 7.	Inside Lever2 8.	Inside Finish2 9.	10. Inside Rose1, 2	Handing3 11.	Strike4 12.	Door Thickness5 13.	Keyway 14.	Options 15.
Ex.	1	LE	BMS	GRW	P	03	626	00A				RH	10-136	1-3/4	S123

Please complete all information above and email order to:

Order_Entry_Schlage_Commercial@allegion.com

• 1. Applicable only to Greenwich sectional with rose design.
• 2. Specify only if different from outside.
• 3. Required if selecting one of the handed lever styles.
• 4. Strike Plate: 10-072 standard for BMD/MD and 10-136 standard for BMS/MS and BMB/MB if no selection is made.
• 5. Door Thickness: 1-3/4" standard if no selection is made.

LE Wireless Lock - Greenwich Mortise/Mortise Deadbolt

1-3. Select Chassis/Function/Style

Note: Check with access control software partner or PACS provider to verify function and/or mobile enabled version is supported by software.

LEBMS-GRW	Mobile enabled mortise with LED indicator: Storeroom function	$1,221.00
LEBMB-GRW	Mobile enabled mortise with push button and LED: Privacy, Office, Apartment functions	$1,251.00
LEBMD-GRW	Mobile enabled mortise deadbolt with LED: Privacy, Apartment functions	$1,320.00
LEMS-GRW	Mortise with LED indicator: Storeroom function	$1,221.00
LEMB-GRW	Mortise with push button and LED: Privacy, Office, Apartment functions	$1,251.00
LEMD-GRW	Mortise Deadbolt with LED: Privacy, Apartment functions	$1,320.00

BMS/MS with LED

BMB/MB with interior push button and LED

BMD/MD- Deadbolt with LED

4. Select Cylinder Type Note: Maximum door thickness with SFIC Cylinder is 2", otherwise compatible with 1-3/4" to 2-1/4" doors.

P År	Mortise cylinder, Schlage 6-Pin (Everest 29 S123 standard) Also available in formats to support residential customers (5-Pin cylinder with C keyways).	N/C
Z Å	Mortise cylinder, Schlage Everest SL, 7-Pin (factory master keyed only)	N/C
L	Less mortise cylinder	DEDUCT $120.00
R ţ	FSIC with cylinder, Schlage 6-Pin (Everest 29 S123 standard)	$75.00
J	Less FSIC, Schlage, 6-Pin	N/C
T	FSIC construction core	$75.00
	G6/7 ţ SFIC with cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only)	$87.00
B	Less SFIC, Schlage, Falcon, competitive OEM's, 7-Pin	N/C
H	SFIC construction core	$45.00
BDC	SFIC disposable	N/C
50-231	Construction core handling charge (non-refundable)	$10.70

• Å Master keyed cylinders will be shipped in lock package. To specify, send Master Keying System Summary form (page 293 of SES price book) with order or go to kss.allegion.com.
• r For master keying, an additional charge of $20.70 each applies. Specify line item 50-210.
• £ Control keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
• For additional assistance on Master Keying as well as restricted keyways please contact customer service.

5. Select Outside Lever Note: Reference pages 6 and 7 to see style option images.

03	Suites with Tubular style	N/C
06	Suites with Rhodes style	N/C
07	Suites with Athens style	N/C
17	Suites with Sparta style	N/C
LAT	Latitude	N/C
Standard options	01, 02, 05, 12, 18, LON, OME, ACC, AST, MER, 41, and 42 (also 03, 06, 07, 17, and LAT)	N/C
M Collection options	M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, M85, ME1, ME2, ME3	$30.00
8xx*	Tactile Warning on standard levers available for 01 ,02, 03, 05, 06, 07, 12, 17, and 18	$49.20
8xx*	Tactile Warning on M collection levers available for M51, M52, and M81	$80.10

^* Ordering instructions: Preface lever design code with 8. Example: 803 for 03, 851 for M51, etc. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

6. Select Outside Finish

626	Satin Chrome	N/C
605	Bright Brass	$65.00
606	Satin Brass	$65.00
612	Satin Bronze (00C rose not available in 612 finish)	$65.00
619	Satin Nickel	$65.00
622	Matte Black	$65.00
625	Bright Chrome	$65.00
643e	Aged Bronze	$65.00
626AM	Satin Chrome Antimicrobial	$88.00

7. Select Outside Rose

00A	2-1/8" (54 mm) diameter	STANDARD
00B	2-9/16" (65 mm) diameter	N/C
00C	2-5/8" (66 mm) diameter with bevel (Not available in 612 finish)	N/C
AVA	Decorative rose 2-5/8" (66 mm) diameter, supports ACC lever only	N/C
MER	Decorative rose 2-5/8" (66 mm) diameter, supports MER lever only	N/C

LE Wireless Lock - Greenwich Mortise/Mortise Deadbolt

8. Select Inside Lever Note: Specify only if different from Outside Lever.

Standard options	01, 02, 03, 05, 06, 07, 12, 17, 18, LAT, LON, OME, ACC, AST, MER, 41, and 42	N/C
M Collection options*	M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, and M85	$30.00

^{* $30} price adder for M Collection levers only applies if outside lever is Standard.

9. Select Inside Finish Note: Specify only if different from Outside Finish.

See options in section 6.	$63.00-$85.00*

^* Upcharge only applies if outside finish is 626 and you are specifying a different inside finish.

10. Select Inside Rose Note: Specify only if different from Outside Rose.

11. Select Handing (Field reversible)

RH	Right Handed	STANDARD
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

12. Select Strike Lip Length

10-136	1-3/16" lip length (MS and MB only)	STANDARD
10-136-112	1-1/2" lip length (MS and MB only)	N/C
10-136-134	1-3/4" lip length (MS and MB only)	$27.90
10-072	1-3/16" lip length (MD only)	STANDARD
10-072-112	1-1/2" lip length (MD only)	N/C
10-072-134	1-3/4" lip length (MD only)	$32.20

13. Select Door Thickness

134	1-3/4"	STANDARD
200	2"	$52.60
214	2-1/4"	$52.60

14. Select Keying Type

Open Keyway Families (Mortise cylinder or FSIC)2
Everest 29 S (Key in Lever or FSIC)	STANDARD
Everest C	N/C
Classic Obverse	N/C
Everest 29 T	$18.00
Everest D	$18.00
Everest 29 R (Everest SL)	$18.00
Everest 29 B (Everest SL)	$18.00
Quad, Numbered, Reverse	$18.00
Everest 29 R	N/C
Everest B	N/C
	Restricted Keyway Families (Mortise cylinder or FSIC)1,2,3 Restricted Keyway Families (SFIC)3

^1. Everest Restricted Keyways require a Letter of Authorization submitted with the order. See sample Letter of Authorization, page 305 of SES price book.

^2. Full size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line item.

^3. For restricted keyways please see terms and conditions.

LE Wireless Lock - Addison Mortise/Mortise Deadbolt

1-3. Select Chassis/Function Note:

Check with access control software partner or PACS provider to verify function and/or mobile enabled version is supported by software.

LEBMS-ADD	Mobile enabled mortise with LED indicator: Storeroom function	$1,262.00
LEBMB-ADD	Mobile enabled mortise with push button and LED: Privacy, Office, Apartment functions	$1,292.00
LEBMD-ADD	Mobile enabled mortise deadbolt with LED: Privacy, Apartment functions	$1,361.00
LEMS-ADD	Mortise with LED indicator: Storeroom function	$1,262.00
LEMB-ADD	Mortise with push button and LED: Privacy, Office, Apartment functions	$1,292.00
LEMD-ADD	Mortise Deadbolt with LED: Privacy, Apartment functions	$1,361.00

Outside

BMS/MS with LED Indicator

BMB/MB with interior push button and LED

BMD/MD- Deadbolt with LED

4. Select Cylinder Type Note: Maximum door thickness with SFIC Cylinder is 2", otherwise compatible with 1-3/4" to 2-1/4" doors.

P År	Mortise cylinder, Schlage 6-Pin (Everest 29 S123 standard) Also available in formats to support residential customers (5-Pin cylinder with C keyways).	N/C
Z Å	Mortise cylinder, Schlage 7-Pin (Everest SL standard) (factory master keyed only)	N/C
L	Less mortise cylinder	DEDUCT $120.00
R ţ	FSIC with cylinder, Schlage 6-Pin (Everest 29 S123 standard)	$75.00
J	Less FSIC, Schlage, 6-Pin FSIC	N/C
T	FSIC construction core	$75.00
	G6/7 ţ SFIC with cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only)	$87.00
B	Less SFIC, Schlage, Falcon, competitive OEM's, 7-Pin	N/C
H	SFIC construction core	$45.00
BDC	SFIC disposable	N/C
50-231	Construction core handling charge (non-refundable)	$10.70

• Å Master keyed cylinders will be shipped in lock package. To specify, send Master Keying System Summary form (page 293 of SES price book) with order or go to kss.allegion.com.
• r For master keying, an additional charge of $20.70 each applies. Specify line item 50-210.
• £ Control keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

5. Select Outside Lever* Note: Reference pages 6 and 7 to see style option images.

03	Suites with Tubular style	N/C
06	Suites with Rhodes style	N/C
07	Suites with Athens style	N/C
17	Suites with Sparta style	N/C
LAT	Latitude	N/C
Standard options	01, 02, 05, 12, 18, LON, OME, ACC, AST, MER, 41, and 42 (also 03, 06, 07, 17, and LAT)	N/C
M Collection options	M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, M85, ME1, ME2, ME3	$30.00
8xx*	Tactile Warning on standard levers available for 01 ,02, 03, 05, 06, 07, 12, 17, and 18	$49.20
8xx*	Tactile Warning on M collection levers available for M51, M52, and M81	$79.20

^* Ordering instructions: Preface lever design code with 8. Example: 803 for 03, 851 for M51, etc. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

6. Select Outside Finish

626	Satin Chrome	N/C
605	Bright Brass	$65.00
606	Satin Brass	$65.00
612	Satin Bronze	$65.00
619	Satin Nickel	$65.00
622	Matte Black	$65.00
625	Bright Chrome	$65.00
643e	Aged Bronze	$65.00
626AM	Satin Chrome Antimicrobial	$88.00

7. Select Outside Rose (Not applicable to Addision)

8. Select Inside Lever Note: Specify only if different from Outside Lever.

Standard options	01, 02, 03, 05, 06, 07, 12, 17, 18, LAT, LON, OME, ACC, AST, MER, 41, and 42	N/C
M Collection options*	M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, and M85	$30.00

^{* $30} price adder for M Collection levers only applies if outside lever is Standard.

9. Select Inside Finish Note: Specify only if different from Outside Finish.

See options in section 6. $63.00-$85.00*

10. Select Inside Rose (Not applicable to Addision)

11. Select Handing (Field reversible)

RH	Right Handed	STANDARD
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

12. Select Strike Lip Length

10-136	1-3/16" lip length (MS and MB only)	STANDARD
10-136-112	1-1/2" lip length (MS and MB only)	N/C
10-136-134	1-3/4" lip length (MS and MB only)	$27.90
10-072	1-3/16" lip length (MD only)	STANDARD
10-072-112	1-1/2" lip length (MD only)	N/C
10-072-134	1-3/4" lip length (MD only)	$32.20

13. Select Door Thickness

134	1-3/4"	STANDARD
200	2"	$52.60
214	2-1/4"	$52.60

14. Select Keying Type

	Open Keyway Families (Mortise cylinder or FSIC)2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/F/FG/G	Classic Obverse	N/C
	Restricted Keyway Families (Mortise cylinder or FSIC)1,2,3
29T	Everest 29 T	$18.00
D	Everest D	$18.00
29R	Everest 29 R (Everest SL)	$18.00
B	Everest 29 B (Everest SL)	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families (SFIC)3
29R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization submitted with the order. See sample Letter of Authorization, page 305.

^* Upcharge only applies if outside finish is 626 and you are specifying a different inside finish.

^2. Full size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line item.

^3. For restricted keyways please see terms and conditions.

LE Parts

	Lever & Knob Kits
Style	Design Option	605	606	612	619	622	625	626		643e 626AM
	016, 026, 03, 056, 06, 07, 12I, 17, 18, 416, 426, OME6	• • • •				•	•	•	•	•
Standard	ACC6, AST6, MER6, LAT6, LON6	•	•		•	•	•	•	•	•
Decorative	M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826, M836, M846, and M856I, ME1, ME2 and ME3	•	•		•	•	•	•	•	•
	6 Extended Factory Lead Time I Specify handing
Part Number	Description		Standard levers/knobs						Decorative levers
09-401	Outside lever/knob, retaining clip, insertion tool
09-402	Inside lever + bushing, mounting plate, screw pack, spanner wrench	$186.00 $201.00
	Note: Knobs and levers standard default is for 1-3/4" door. 2" and 2-1/4" door widths also available.

ORDERING INSTRUCTIONS: Specify part number, lever design, and finish. Also specify door thickness when other than 1-3/4". (Example: 09-401 03 626 214)

	Rose Kits (Greenwich)
Style	Design Option	605	606 612 619 622 625 626 643e 626AM
Standard	00A, 00B, 00C	•	•	•	•	•	•	•	•	•
Decorative	MER, AVA	•	• • • • • •						•
Part Number	Description					Price Each
09-403	Inside rose (includes mounting plate and screws)
09-404	Outside rose + bushing					$105.00
09-508	Blank outside rose (not available MER or AVA)

ORDERING INSTRUCTIONS: Specify part number, lever design + rose, and finish. (Example: 09-404 03A 626. Lever design must be specified for proper bushing)

	Outside Greenwich Lever/Knob and Rose Subassemblies
Style	Design Option	605 606 612 619 622					625	626		643e 626AM
	016, 026, 03, 056, 06, 07, 12I, 17, 18, 416, 426, OME6	•	•	•	•	•	•	•	•	•
Standard	ACC6, AST6, MER6, LAT6, LON6	•	•		•	•	•	•	•	•
Decorative	M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826, M836, M846, and M856I, ME1, ME2 and ME3	•	• • •					•	•	•
	6 Extended Factory Lead Time I Specify handing
Part Number	Description		Standard levers/knobs						Decorative levers
09-506	Outside lever/knob assembly for 00A, 00B or 00C rose	$213.00 $228.00
09-655	Outside lever assembly for AST w/Avanti rose or MER w/Merano rose only	$213.00 N/A

ORDERING INSTRUCTIONS: Specify part number, lever design, rose, and finish. (Example: 09-506 M53A 626)

	Inside Subassemblies
	Available Finishes - Specify for Listed Parts		605	606	612	619	622	625	626		643e 626AM
Part Number Description		Contents	•	•	•	•	•	•	•	•	•
	Greenwich inside trim assembly without battery cover
L483-033	Mortise deadbolt (MD)						$479.00
47270612	Mobile enabled mortise deadbolt (BMD)	Complete trim minus					$479.00
L483-034	Mortise with push button (MB)	battery cover, battery					$474.00
47270613	Mobile enabled mortise with push button (BMB)	holder and mounting					$474.00
L483-035	Mortise with LED (MS)	screws					$464.00
47270614	Mobile enabled mortise with LED (BMS)						$464.00
	Addison inside escutcheon assembly without battery cover
L483-036	Mortise deadbolt (MD)						$525.00
47270616	Mobile enabled mortise deadbolt (BMD	Complete escutcheon					$525.00
L483-037	Mortise with push button (MB)	minus battery cover,	$520.00
47270617	Mobile enabled mortise with push button (BMB)	battery holder and	$520.00
L483-038	Mortise with LED (MS)	mounting screws	$515.00
47270618	Mobile enabled mortise with LED (BMS)		$515.00

ORDERING INSTRUCTIONS: Specify finish. (Example: L483-036 626)

Outside	Subassembli	es
Available Finis	shes - Specify for Listed	Parts	605	606	612	619	622	625	626	643e	626AM
Part Number	Description	Contents
L483-016	Greenwich Trim	1) Outside reader (electronics & trim) 2) Harness 3) Cover 4) Grounding spring 5) Back plate 6) Two screws	$412.00
Part Number	Description	Contents	St	andard	Levers	/Knobs	5	De	corativ	e Leve	rs
L483-017	Addison Escutcheon	1) Outside reader (electronics & escutcheon) 2) Harness 3) Lever	$618.00 $633.00
L483-051	Addison Escutcheon	Outside reader (electronics & escutcheon) Harness Lever NOT included	$474.00 $489.00

ORDERING INSTRUCTIONS: Specify finish (GRW or ADD). For Addison, also specify lever style. (Example: L483-017 03 626)

Battery	Battery Parts
Part Number	Description	Price Each
L483-039	Battery Harness	$9.30
N623-006	Battery Holder	$18.50
L483-025	Greenwich battery cover with screw, washer & magnet	$36.30
L483-031	Addison battery cover with screw, washer & magnet	$39.10

Armor Fronts
			606	612	619	622	625	626	643e	626AM
Available Finis	Available Finishes - Specify for Listed Parts			•						•
Part Number	Description	Price Each
09-666	1-1/4" wide for 1-3/4" and larger door thicknesses (for MS, MB, MD)	$38.10

Strikes
A - N - In In I - IP - 1	share Consider Continued Books		605	606	612	619	622	625	626	643e	626AM
AVAIIADIE FINI	shes - Specify for Listed Parts
Part Number	Description	Contents				· I	Price Ea	ch	,
10-136	1-1/4" x 4-7/8" strike, 1-3/16" lip length, standard (MS and MB)*	(1) square corner strike					$38.5	0
10-136-112	1-1/4" x 4-7/8" strike, 1-1/2" lip length (MS and MB)*	(2) screws (1) strike box (includes DPS	$38.50 $65.40
10-136-134	1-1/4" x 4-7/8" strike, 1-3/4" lip length (MS and MB)*	magnet)
L583-761	Strike box with magnet tray only (finish not applicable) - MS and MB		$15.70
L583-760	DPS magnet for L583-761 only (finish not applicable)						$15.70	)
10-072	1-1/4" x 4-7/8" strike, 1-3/16" lip length, standard (MD only)*						$23.2	0
10-072-112	1-1/4" x 4-7/8" strike, 1-1/2" lip length (MD only)*	(1) square corner strike (2) screws (1) strike box	$23.20 $59.20
10-072-134	1-1/4" x 4-7/8" strike, 1-3/4" lip length (MD only)*	(1) Strike box
K510-066	Strike box only (finish not applicable) - MD only						$7.00	)

^* ORDERING INSTRUCTIONS: Specify finish.

LE Parts

	Mortise Cylinders
	Available Finishes - Specify for Listed Parts			612	619	622	625	626		643e 626AM
				•	•	•	•	•	•	•
		• • Price Each
Part Number	Cylinder only				Open
30-021-112	Conventional (non-Everest, non-Primus) - 1-1/2" length			$120.00				$138.00
20-793-112	Primus controlled access- 1-1/2" length
20-793-112-XP	Primus XP controlled access- 1-1/2" length		$205.00
20-593-112	Primus UL 437- 1-1/2" length
20-593-112-XP	Primus XP UL 437- 1-1/2" length	$239.00

ORDERING INSTRUCTIONS: Specify finish and Cylinder Length. (Reference Cylinder and length requirement table on page 53. (ex 30-021-138-626) Note: 1 1/2" cylinders support 1 3/4" through 2 1/4" door thickness.

If 1 3/4" thick door a 1 3/8" cylinder can be used by designating 138 in place of 112 in table above. If this is done deduct $45.00 from list price in table.

	Cylinder Housing Without Core, LE-Series
Finishes Available: 605, 606, 609, 612, 613, 619, 625, 626, 643e
Cylinder Type	Cylinder	1-3/4"	2"	2-1/4"	16' Price Each
FSIC	30-016			$64.00
SFIC	80-108*	1-3/8" (138)	N/A	$74.00

ORDERING INSTRUCTIONS: Specify finish (30-016-112-626)

^* Cylinders include compression spring

	Mortise Chassis and Wire Harnesses
Part Number	Description Price Each
L483-000	Chassis with harness (MS and MB only)	$803.00
L483-001	Chassis with harness (MD only)	$968.00
L483-018	Reader harness	$30.90
L483-007	Chassis harness with RX module switch	$103.00
L483-055	DPS kit (external, MD only) Contains: magnet, switch, and harness	$6.50

	Door Parts
Part Number	Description	Price Each
L283-029	(2) Spacers for ANSI A115.1 metal door preparations	$38.10

Knob Parts
Part Number	Description	Price Each
K110-550	Pack of truarc ring (1), spacer (2), knobs	$9.00
L583-321	Mounting plate, inside knob	$7.60

	Lever Parts
Part Number	Description	Price Each
L283-030	Pack of 20 truarc rings, levers	$22.60
L583-212	(1) Mounting post (ferrule) for 1-3/4" door thickness	$12.10
L583-213	(1) Mounting post (ferrule) for 2" door thickness	$12.10
L583-214	(1) Mounting post (ferrule) for 2-1/4" door thickness	$12.10
L283-031	Mounting plate, inside lever	$20.70
L283-040	Spring cage (1 required per lever)	$10.20
L583-066	Mounting plate screw (2 required per lock)	$1.40
L283-198	Spindles and springs for 1-3/4" to 1-7/8" doors (2 each)	$16.50
L283-199	Spindles and springs for 2" to 2-1/4" doors (2 each)	$19.40
L283-060	Spindle and spring for 1-3/4" to 1-7/8" doors (qty: 1 – 2 required per lock)	$8.20
L283-061	Spindle and spring for 2" to 2-1/4" doors (qty: 1 – 2 required per lock)	$10.20

	Screw Packs
Part Number	Description	Contains	Price Each
L483-047	Greenwich screw pack	(2) Reader- mount screws (not finished) (1) Tamper-resistant battery screw (1) Battery cover washer	$13.40
L483-048	Addison screw pack specify finish	(1) Each Philips and tamper-resistant bottom screw - specify finish (2) Reader- mount screws (not finished) (1) Tamper-resistant battery screw (1) Battery cover washer	$21.60
C203-736	Lock Case Screws	(2) C603-256, #12-24 WMS PFH	$6.80
C203-736	Strike Screws	(2) C603-256, #12-24 WMS PFH.	$6.80
K110-020	Armor Front Screws	(2) K510-210, #8-32 x 1/4" MS PFH	$0.92
L483-066	Battery cover screw (10 pack)	(10) 24361818 battery cover screw, #4-40 x 1/4" PH (10) L783-036 battery cover captive washer	$20.60

^* Consult Customer Care.

Chassis Torx Screw Packs
Part Number	Description Contains Price Each
L283-121	Tamper-resistant Torx screw pack for standard L screws - specify finish	(2) Armor screws, #8-32 x 1/4" (T-15) (2) Strike screws, #12-24 x 1/2" (T-20) (1) Each T-15 and T-20 installation tool	22.80
L483-065	Backplate screw pack w/grounding spring - specify finish	(1) L783-029, grounding spring (6) F605-416, #6-32 x 3/8" TFH	5.20

LE Wireless Lock Accessories

Installation Tools
Part Number	Description	Price Each
40-286	Universal Clamp	$476.00
40-248	L/LE Series installation template	$402.00
40-291	Universal mortise door position switch (DPS) installation template (For use with only LE-MD lock)	$146.00
40-158	Mortise pocket filler (edge)	$179.00

Note: : The universal clamp above is necessary when using the remaining products to ensure hole placement accuracy. These installation tools function together and form a complete LE installation kit. The "Universal" (Clamp & DPS) products are for use in all CO, AD and LE product installations.

	Wood Mounts
Part Number	Description	Price Each
44-212	LE Series mortise mount (for display)	$417.00

ENGAGE Wireless Test Kit & Accessories
Part Number	Description	List Price
47271232	TKE - ENGAGE Test Kit. For use in pre-iinstallation test applications. Comes with 2 TKE Transponders, ENGAGE gateway, tripod, TKE gateway bracket, battery, and backpack carry case.	$1,823.00
47269850	TKE Transponder	$567.00
47269870	TKE Gateway Backet (Tripod Adapter)	$46.40

NDE WITH ENGAGE TECHNOLOGY - TABLE OF CONTENTS
FINISH CODES AND DESCRIPTIONS	71
HOW TO ORDER	72
STANDARD FEATURES	73
NDE FUNCTIONS	74
NSE WIRELESS LOCK	75
NDE WIRELESS LOCK - CYLINDRICAL	76
ORDERING GUIDE	77
NDE PARTS Outside Escutcheon Subassembly Reader PCBA Battery Holder Kit Levers and Related Components Inside Escutcheon Subassembly Latches and Related Components Strikes Competitor Core/Compatibility Parts Reinforcements Motorized Chassis Assembly Main Wire Harness Miscellaneous Parts Conversion Kits Screws Screw Packs Torx Screw Packs Cylinder Reference Table	80 80 80 80 80 81 81 81 82 82 82 82 82 83 83 83 83 83
CTW ENGAGE SINGLE DOOR CONTROLLER	84

	Finish Codes and Descriptions
Code 605 606 612 619 622 625 626 626AM 643e		(US 3) (US 4) (US 10) (US 15) (US19) (US 26) (US 26D) (US 11)	Description Bright Brass Satin Brass Satin Bronze Satin Nickel Matte Black Bright Chromium Plated Satin Chrome Antimicrobial Coating on Satin Chromium Aged Bronze

CONTACT INFORMATION FOR NDE SERIES LOCKS & DEVICES

Payment Address: Schlage Electronic Security

15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service: Technical Support:
Order Status, Credit Returns of Non-Defective Products, General Sales Questions	Technical Questions/Issues, Returns of Defective Products, Repairs
Email Orders To: Contact For Technical Assistance: Order_Entry_Schlage_Commercial@allegion.com Electronic_Lock_TechProdSupport@allegion.com

NDE - How to Order

How to Order: REQUIRED FIELDS FACTORY DEFAULT AND OPTIONS

NDE80 – PD – ATH – 626 – SPA – 605 – 13-247 – 10-130 – S123 –

NDEB – JD – LAT – 622 – – – 13-247 – 10-125 – – K510-066

Series: Vandlgard only

NDE80 Single function

NDEB Multi-function

(specified during commissioning)

Cylinder Type:

P Schlage KIL format

(see ordering pages for options)

D Dead Latch (only option)

Outside Lever:

ATH Athens*

BRK Boardwalk*

BRW Broadway*

LAT Latitude*

LON Longitude*

OME Omega

RHO Rhodes*

SPA Sparta* TLR Tubular*

* Tactile warning available – see lever options

Outside Finish:

605 Bright Brass

606 Satin Brass

612 Satin Bronze

619 Satin Nickel

622 Matte Black

625 Bright Chrome 626 Satin Chrome

626AM Satin Chrome (Anti – Microbial)

643e Aged Bronze

Inside Lever:

• Same style options as Outside Levers
• Omega levers are very close to the escutcheon when rotated consider Sparta levers as a substitute
• Tactile levers not available for inside lever

Inside Finish:

• Same finish options as Outside Finish

Latch:

13-247 – 2-3/4" backset; ½" throw bolt; 1-1/8"x2-1/4" faceplate (standard for both series) (see ordering page for options)

Strike:

NDE80: 10-130 – 1-1/4" x 4-7/8" with 1-3/16" lip and magnets for door position sensing

NDEB: 47267101 – 1-1/4" x 4-7/8" with 1-3/16" lip (10-025 with retained screws)

(see ordering page for options)

Keyway:

S123 Everest 29 (standard for both series)

(see ordering page for options)

Additional Options:

see ordering pages for options)

Standard Features

Certification ANSI/BHMA Certified A156.25-2013, A156.2-2011, Series 4000, Grade 1, UL 294,

UL 10C

Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw

Strike 1 1/4" x 4 7/8", ANSI Square corner, with DPS magnets, no box

Backset 2 3/4"

Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)

Door Range Comes set for 1-3/4" thick doors. Can be field adjusted for doors 1-5/8"-2" thick.

Keys Two nickel silver cut keys per lock, 6-pin, S123 section

ANSI/BHMA Certified A156.25-2013, A156.2-2011, Series 4000, Grade 1, UL 294, UL 10C

NDE80 - No interior push button
Storeroom	Lockset is normally secure with outside lever disengaged. Valid credential or key momentarily unlocks door. Valid credential may be used to change to a passage or secured state. A mechanical key will retract the latch. Inside lever always allows free egress.

	NDEB - Interior push button
Storeroom	Lockset is normally secure with outside lever disengaged. Valid credential or key momentarily unlocks door. Valid credential may be used to change to a passage or secured state. Interior push button confirms state of the lock. A mechanical key will retract the latch. Inside lever always allows free egress.
Office	Lockset is normally secure. Interior pushbutton on inside housing may be used to select a passage or secured status. Valid toggle credentials on the exterior may also be used to change status. Meets need for lockdown function for safety and security. A mechanical key will retract the latch. Inside lever always allows free egress.
Privacy	Lockset is normally secure. Interior pushbutton on inside housing may be used to select a privacy status. The interior pushbutton will disable normal electronic access from the exterior. Opening the door or pressing the interior pushbutton a second time on the inside housing deactivates the privacy status. A mechanical key will always retract the latch. Inside lever always allows free egress. Door position sensor required for function.
Apartment	Lockset is normally secure. Interior pushbutton on inside housing may be used to select a passage or secured status. Opening the door or pressing the interior pushbutton causes the lockset to toggle unsecured. While toggled unsecured, the lockset can only be secured while the door is closed by pressing the interior pushbutton or using a normal credential on the exterior. Normal electronic access from the exterior is always allowed. A mechanical key will retract the latch. Inside lever always allows free egress.

NDE Wireless Locks

Latitude (LAT) Longitude (LON) Broadway (BRW) Boardwalk (BRK)

Commercial Lever Suite
NDE Levers	AD/CO Levers	ND Levers	L Lock Levers	98/99 Exit	ALX Lock	S Lock	F Lock
Athens	Athens	Athens	07	07	Athens	Jupiter
Sparta	Sparta	Sparta	17	17	Sparta	Neptune	Jazz
Rhodes	Rhodes	Rhodes	06	06	Rhodes	Saturn	Elan
Tubular		Tubular			Tubular
Omega		Omega			Omega
Latitude		Latitude	Latitude	Latitude	Latitude		Latitude
Longitude		Longitude	Longitude	Longitude	Longitude
Broadway		Broadway			Broadway
Boardwalk		Boardwalk			Boardwalk

Tactile Options

Typical pattern for 8AT, 8LT, 8LN, 8RO, 8SP Typical pattern for 8BK, 8BW, 8TR

Latches

Deadlatch, 13-247 Anti-Friction Fire Door Deadlatch, 14-042

Deadlatch, 14-047 Deadlatch, 14-048

Strikes

ANSI Strike, 10-130 47267101 (10-025 w/ retained screws)

ANSI Strike, standard box 10-131

T Strike, 10-132 Square corner, T-strike, deep box, fire door latch, 10-133

NDE Wireless Lock - Cylindrical

Cylinder

Core Callout	Description	Levers
P	6-Pin KIL Cylinder	ATH OME RHO
L	Less 6-Pin KIL Cylinder	SPA TLR LAT LON BRW BRK
Z	Everest SL 7 pin KIL Cylinder
R	Full Size Interchangeale Core
J	Less Full Size Interchangeable Core
T	Full Size Construction Core
B	Less Small Format Interchangeable Core
BDC	Disposable Small Format Interchangeable Core
G	7 Pin Small Format Interchangeable Core
50-231	Construction Core Handling Chanrge (non-refundable)
L SAR	Less cylinder: Sargent KIL Core - 10L & 11L	ATH RHO SPA TLR
L COR	Less cylinder: Corbin KIL Core - 8000
J SAR	Less cyilnder: Sargent FSIC 6-pin Core - 6300
J CO6	Less cylinder: Corbin FSIC 6-pin Core - 8000
J YA6	Less cylinder: Yale FSIC 6-pin Core - 1210 or Medesco FSIC 6-pin Core - 31-0100
J MED	Less cylinder: Medesco FSIC 6-pin Core - 32-0101
J CO7	Less cylinder: Corbin FSIC 7 pin Core - 8000-7	RHO
J YA7	Less cylinder: Yale FSIC 7-pin Core - 1211

Notes: 1. Competitor lever designs come in finishes 626 standard, and 605, 606, 612, 619, 625, 643e, and 626AM with extended lead-times.

• 2. For P, R and G -Master Keyed cylinders can be specified and will be shipped in lock packaging.
• 3. For Master Key System Summary form which should accompany the master keyed order, see pages 293-303.
• 4. For Master Keying, additional line item 50-210 is required for Classic and Everest cylinders.
• 5. Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
• 6. Spring cages & tail pieces are different based on the type of cylinder and chassis selected. Please see the NDE-Series parts guide for more information.
• 7. The NDE-Series accepts many popular models of standard, SFIC, and FSIC cylinders. See pricebook for specific configurations.
• 8. For additional assistance on Master Keying as well as restricted keyways please contact your local sales representative.

Customer Name:
Customer Address:
Ship To:
Account #:
Quote #:
PO # & Date:
Price book #:
Shipping Instructions:
Requested Ship Date:
Order Written By:
For Further Information Contact (Name, Phone, Fax)

	Quantity	Series 1.	Function 80 2.	Cylinder 3.	Outside Lever 4.	Outside Finish 5.	Inside Lever1 6.	Inside Finish1 7.	Backset & Latch2 8.	Strike3 9.	Keyway 10.
Ex.	1	NDE	80	PD	SPA	626			13-047	10-130	S123

Please complete all information above and email order to:

Order_Entry_Schlage_Commercial@allegion.com

• 1. Specify only if different from outside
• 2. Backset & Latch: 13-247 standard for cylindrical if no selection is made
• 3. Strike Plate: 10-025 standard for cylindrical if no selection is made

1. Select Product Series

NDE80	Cylindrical Storeroom Lock with Vandlgard	$971.00
NDEB	Multi-Function Cylindrical Lock with Vandlgard	$971.00

NDE-80

KIL Format P L Z L-SAR L-CO6

FSIC Format R J T J-SAR J-CO6 J-CO7 J-YA6 J-YA7 J-MED

SFIC Format B BDC G H

2. Select Cylinder Type

PD Å	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
ZD Å	With Cylinder, Schlage- Everest SL, 6 Pin KIL (factory master keyed only)	N/C
LD	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
RD ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$38.00
JD	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
T	FSIC construction core	$39.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only)	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L CO6 8	Less Cylinder, Corbin Russwin KIL, 6 Pin KIL	N/C
L SAR 68	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
J SAR 68	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6 68	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7 8	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP)	N/C
J MED 8	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6 68	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7 8	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
H	SFIC construction core	$45.00
BDC	SFIC disposable	N/C
50-231	Construction core handling charge (non-refundable)	$10.70

• Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.
• r For Master Keying, additional line item 50-210 is required $20.70 each.
• £ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
• For additional assistance on Master Keying as well as restricted keyways please contact customer service.
• 6 Extended lead time on all finishes except 626
• 8 Not available on LAT, LON, BRW and BRK

3. Select Outside Lever*

LLL	Less each lever	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
OME	Omega	N/C
LAT	Latitude	N/C
LON	Longitude	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
	Tactile options (8AT, 8LT, 8LN, 8RO, 8SP, 8BK, 8BW, 8TR)	$45.90

4. Select Outside Finish

626	Satin Chrome	N/C
605	Bright Brass	$72.00
606	Satin Brass	$72.00
612	Satin Bronze	$72.00
619	Satin Nickel	$72.00
622	Matte Black	$72.00
625	Bright Chrome	$72.00
643e	Aged Bronze	$72.00
626AM	Satin Chrome Antimicrobial	$102.00

5. Select Inside Lever* (Specify only if different from Outside Lever)

LLL	Less each lever	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
OME	Omega	N/C
LAT	Latitude	N/C
LON	Longitude	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
	Tactile options (8AT, 8LT, 8LN, 8RO, 8SP, 8BK, 8BW, 8TR)	$45.90

Credentials available, see pages 26-31.

6. Select Inside Finish (Specify only if different from Outside Finish)

626	Satin Chrome	N/C
605	Bright Brass	$72.00*
606	Satin Brass	$72.00*
612	Satin Bronze	$72.00*
619	Satin Nickel	$72.00*
622	Matte Black	$72.00*
625	Bright Chrome	$72.00*
643e	Aged Bronze	$72.00*
626AM	Satin Chrome Antimicrobial	$102.00*

^* Charge only applies if outside finish is 626 and you are specifying a different inside finish.

7. Select Backset & Latchbolt

LLL	Less Latch	DEDUCT $36.30
13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
14-042	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner,	$186.00
14-047	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
14-048	2-3/8" Backset, Deadlatch Square corner, 1" x 2-1/4"	N/C

8-9. Select Strike Plate and Strike Lip Length

10-130*	1-3/16" Lip, ANSI, DPS magnets, no box, 1-1/4" x 4-7/8"	STANDARD
10-131*	1-3/16" ANSI, DPS magnets, Standard box, 1-1/4" x 4-7/8"	N/C
10-132**†	1-1/8" Lip, Square Corner, T-strike, DPS magnets, box, 1-1/8" - 2-3/4"	N/C
10-133 †	1-1/8" Lip, Square Corner, T-strike, DPS magnets, deep box, fire door latch	$18.00
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-3/8&} quot; Lip available, must specify 1-3/8" Lip $15.50, 1-1/2" Lip available, must specify 1-1/2" Lip $15.50

10. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
29R	Everest 29 R (Everest SL)	$18.00
B	Everest B (Everest SL)	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

^{** 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.40

^† DPS magnet requires prep and install beneath strike

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

NDE Wireless Lock Parts

Outside Escutcheon Subassembly
Available Finishes - Specify for Listed Parts			605	606	612	619	625	626	643e	626AM
		•	•	•	•	•	•	•	•
Part Number	Description	Contents	Price Each
N223-045	Outside Escutcheon Subassembly (without reader PCBA)	(3) #6-32 x .25 FH PD TC Screw (1) Outside Esctucheon (1) Outside RF Window Assembly (1) Adjustment Spring (1) Outside Backplate	$108.00

Reader PCBA
Part Number	Description	Price Each
N223-046	Reader PCBA	$355.00

	Battery Holder Kit
Part Number	Description	Contents	Price Each
N223-044	Battery Holder Kit	(1) Battery Tray Assembly (1) Battery Strap	$26.30

Part Number N523-127 N523-091 09-774 D500-000 03-230* 03-231* 03-232* 03-200* 47258039	Available Finishes - Specify for Listed Parts Description FSIC Core Driver SFIC Core Driver SFIC Core Driver and Spacer SFIC Core Spacer - Spacer required for 6-pin, no spacer required for 7-pin New product manufactured on or after February 1, 2017 (reference serial number label on product) Lever - Closed; ATH, 8AT, RHO, 8RO, SPA, 8SP, OME, TLR, 8TR Lever - Cylinder - Schlage KIL; ATH, RHO, SPA Lever - Cylinder - Schlage FSIC; ATH, RHO, SPA	605 •	606 •	612 •	619 •	625 • Price Each $2.80 $12.60 $15.50	626 •	643e •	626AM •
						$1.60
	Lever - Cylinder - Schlage SFIC; ATH, RHO, SPA
	Lever - Cylinder - Schlage SFIC - BRW					$187.00
47258040	Lever - Cylinder - Schlage SFIC - BRK
47258041	Lever - Cylinder - Schlage SFIC - LAT
47258042	Lever - Cylinder - Schlage SFIC - LON
47260537	Lever - Cylinder - Schlage SFIC - 8BY
47260538	Lever - Cylinder - Schlage SFIC - 8BK
47260539	Lever - Cylinder - Schlage SFIC - 8LT					$187.00
47260540	Lever - Cylinder - Schlage SFIC - 8LN
47258043	Lever - Closed - BRW
47258044	Lever - Closed - BRK
47258045	Lever - CLosed - LAT					$140.00
47258046	Lever - CLosed - LON
47260541	Lever - CLosed - 8BY
47260542	Lever - CLosed - 8BK
47260543	Lever - CLosed - 8LT					$187.00
47260544	Lever - CLosed - 8LN
47258047	Lever - PD, ZD, LD - BRW
47258048	Lever - PD, ZD, LD - BRK
47258049	Lever - PD, ZD, LD - LAT					$140.00
47258050	Lever - PD, ZD, LD - LON
47260545	Lever - PD, ZD, LD - 8BY
47260546	Lever - PD, ZD, LD - 8BK
47260547	Lever - PD, ZD, LD - 8LT					$187.00
47260548	Lever - PD, ZD, LD - 8LN
47258051	Lever FSIC RD, JD, TD - BRW
47258052	Lever FSIC RD, JD, TD - BRK
47258053	Lever FSIC RD, JD, TD - LAT					$140.00
47258054	Lever FSIC RD, JD, TD - LON
47260549	Lever FSIC RD, JD, TD - 8BY
47260550	Lever FSIC RD, JD, TD - 8BK
47260551	Lever FSIC RD, JD, TD - 8LT					$187.00
47260552	Lever FSIC RD, JD, TD - 8LN
	Original product manufactured before February 1, 2017 (reference serial number label on product)
03-030*	Lever - Closed; ATH, RHO, SPA
03-031*	Lever - Cylinder - Schlage KIL; ATH, RHO, SPA
03-032*	Lever - Cylinder - Schlage FSIC; ATH, RHO, SPA					$140.00
03-000*	Lever - Cylinder - Schlage SFIC; ATH, RHO, SPA

	Inside Escutcheon Subassembly
	Available Finishes - Specify for Listed Parts		605	606	612	619	625	626	643e	626AM
			•	•	•	•	•	•	•	•
Part Number	Description	Contents					Price Each
N223-047	NDE80 Inside Escutcheon Subassembly (without Main PCBA)	(3) #4-40 x .25 PH PD Taptite Screw (1) Inside Esctucheon (1) RF Window (1) Inside Battery Cover					$133.00
N223-048	NDE80 Inside Escutcheon Assembly (with Main PCBA)	(3) #4-40 x .25 PH PD Taptite Screw (1) Inside Esctucheon (1) RF Window (1) Inside Battery Cover (1) Main PCB Module (1) Inside Label					$516.00
47278749	NDEB Inside Escutcheon Assembly (with Main PCBA) Upgrades NDE80 Product	(1) Inside Esctucheon (1) RF Window (1) Door Position Sensor (1) Main PCB Module (1) Inside Label	$476.00
N623-007	Inside Battery Cover	(1) Battery Cover					$40.00

	Latches and Related Components
	Available Finishes - Specify for Listed Parts	605	606	612	619	625	626	643e	626AM
		•	•	•	•	•	•	•
Part Number	Backset - Description					Price Each
Dead Latch***
14-047	2 3/8" - Square corner, 1 1/8" x 2 1/4"					$121.00
14-048	2 3/8" - Square corner, 1" x 2 1/4"					$121.00
13-247	2 3/4" - Square corner, 1 1/8" x 2 1/4"					$92.80
14-042	2 3/4" - Anti-friction Fire Door Latch 1" Square corner, 1 1/8" x 2 1/4", 3/4" Throw	$369.00
***	All latches require reinforcement when used in hollow metal door applications

Strikes
	Available Finishes - Specify for Listed Parts		605	606	612	619	625	626	643e	626AM
			•	•	•	•	•	•	•	•
Part Number	Description	Contents					Price Each
10-025	1 3/16" - ANSI, no box, 1 1/4" x 4 7/8"	(1) ANSI strike					$15.20
10-130-1316	1 3/16" - ANSI, no box, 1 1/4" x 4 7/8"	(1) ANSI strike (2) C603-256 screws (1) ANSI strike magnet tray (2) DPS magnet					$30.60
10-130-138	1 3/8" - ANSI, no box, 1 1/4" x 4 7/8"	1) ANSI strike (2) C603-256 screws (1) ANSI strike magnet tray (2) DPS magnet					$59.50
10-130-112	1 1/2" - ANSI, no box, 1 1/4" x 4 7/8"	(1) ANSI strike (2) C603-256 screws (1) ANSI strike magnet tray (2) DPS magnet					$59.50
10-131-1316	1 3/16" - ANSI, standard box, 1 1/4" x 4 7/8"	(1) ANSI strike (2) C603-256 screws (1) Standard box (1) ANSI strike magnet tray (2) DPS magnet					$39.40
10-131-138	1 3/8" - ANSI, standard box, 1 1/4" x 4 7/8"	(1) ANSI strike (2) C603-256 screws (1) Standard box (1) ANSI strike magnet tray (2) DPS magnet					$67.20
10-131-112	1 1/2" - ANSI, standard box, 1 1/4" x 4 7/8"	(1) ANSI strike (2) C603-256 screws (1) Standard box (1) ANSI strike magnet tray (2) DPS magnet					$67.20
10-132-118	1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4"	(1) T-strike (1) Standard box (1) Door position magnet					$27.80
10-132-112	1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4"	(1) T-strike (1) Standard box (1) Door position magnet					$36.70
10-133-118	1 1/8" - Square corner, T-strike, deep box, 1 1/8" x 2 3/4" Use with fire door latch	(1) T-strike (1) Deep box (1) Door position magnet					$32.70
10-133-112	1 1/2" - Square corner, T-strike, deep box, 1 1/8" x 2 3/4" Use with fire door latch	(1) T-strike (1) Deep box (1) Door position magnet					$32.50
K510-066	Box for ANSI strike	(1) Standard box					$7.00

NDE Wireless Lock Parts

Compet	itor Core/Compatability Parts
	shes - Specify for Listed Parts	605	606	612	619	625	626	643e	626AM
		$	2	Z	2	Z		2
Part Number	Description				Pric	e Eacl	n
New product r	nanufactured on or after February 1, 2017 (reference serial number label on product)
03-234*	Lever - Cylinder - Corbin Russwin KIL (L-CO6); ATH, RHO, SPA, TLR
03-235*	Lever - Cylinder - Corbin Russwin 7-pin FSIC (J-CO7); RHO
03-236*	Lever - Cylinder - Yale 7-pin FSIC (J-YA7); RHO
03-237*	Lever - Cylinder - Medeco 32 (J-MED); ATH, RHO, SPA, TLR	$260.00
03-244*	Lever - Cylinder - Sargent KIL (L-SAR); ATH, RHO, SPA, TLR				$2 (	טט.טט	1
03-255*	Lever - Cylinder - Medeco 31 or Yale 1210 6-pin FSIC (J-YA6); ATH, RHO, SPA, TLR
03-266*	Lever - Cylinder - Corbin Russwin 6-pin FSIC (J-CO6); ATH, RHO, SPA, TLR
03-277*	Lever - Cylinder - Sargent FSIC (J-SAR); ATH, RHO, SPA, TLR
N523-218	Springcage & Lever Catch Assy Outside Standard				Ċ	9.40
	(PD, LD, ZD, RD, JD, TD, BD, BDC, GD, HD, LD SAR , LD CO6, JD CO6, JD SAR, JD CO7)
N523-224	Springcage & Lever Catch Assy Outside Competitor Cores (JD YA6, JD YA7, JD MED)				$14	44.00
XN12-292	Tail piece Sargent XC FSIC				$1	3.00
*	Specify part number, lever style, finish. Ex: 03-055 RHO 613 (Yale lever, Athens design, 613 fir	nish)

Tailpiec	es
Part Number	Description	Price Each
N523-127	Core Driver - SCH FSIC	$3.10
N523-091	Core Driver - SCH SFIC	$12.40
09-060	Core Driver - LD SAR	$12.40
09-061	Core Driver - JD YA6	$12.40
09-062	Core Driver - JD CO6	$12.40
09-063	Core Driver - JD SAR	$12.40
10-140	Core Driver - LD CO6	$12.40
10-141	Core Driver - JD CO7	$23.70
10-142	Core Driver - JD YA7	$23.70
10-143	Core Driver - JD MED	$24.70
09-774	SFIC Core Driverand Spacer	$15.50
D500-000	SFIC Core Spacer - Spacer required for 6-pin, no spacer required for 7-pin	$1.60
XN12-292	Tail piece Sargent XC SFIC	$13.40

Reinford	Reinforcements — Must be used for hollow metal doors
Part Number	Description	Price Each
37-001	Metal door reinforcer kit, fits both 7/8" and 1" diameter housings. Specify door thickness, includes A501-567 and A501-565 or A501-566.	$39.30
24483760	Latch Spacer – fits 1" diameter latch housing and 1-3/4" hollow metal doors (steel & aluminum)	$5.40
A501-566	Reinforcer for 1 3/4" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings.	$19.80

Motorize	ed Chassis Asse	mbly
Part Number	Description	Contents			Price Each
N223-007	Motorized Chassis Assembly	(1) NDE Chassis Subassembly	(1) Motor Actuator Subassembly	(1) Main Wire Harness	$249.00

Main Wi	re Harness
Part Number	Description	Price Each
N223-019	Main Wire Harness	$38.30

Miscella	aneous Parts
Part Number	Description	Price Each
Inside Basepl	ate
N623-000	Inside Baseplate	$26.30
New product	manufactured on or after February 1, 2017 (reference serial number label on product)
Spring Cages
N523-218	Springcage & Lever Catch Assy Outside Standard	$71.50
	(PD, LD, ZD, RD, JD, TD, BD, BDC, GD, HD, LD SAR , LD CO6, JD CO6, JD SAR, JD CO7)	371.30
N523-221	Springcage & Lever Catch Assy Inside Less Cylinder	$50.30
N523-224	Springcage & Lever Catchy Assy Outside Standard (JD YA7, JD YA6, JD MED	$148.00
Original prod	uct manufactured before February 1, 2017 (reference serial number label on product)
Spring Cages
N123-022	Outside spring cage for all functions except SFIC	$71.50
N123-032	Inside Spring Cage	$51.60
N123-056	Outside spring cage for all SFIC functions	$74.80
24341463	SDS O-Ring – 50 pack	$21.30

Conversion	on Kits
	Available Finishes	605	606	612	613	619	622	625	626	643e	626AM
	Available i misnes
Part Number	Backset - Description					Pri	ce Eac	h
40-400	Inside Spring Cage / Lever Conversion Kit	4222.00
40-600	Outside Spring Cage / Lever Conversion Kit	7				$4	228.00	)
Notes:	All kits will contain a spring cage and level a button or tailpiece Kits are limited to previously offered product - KIL, FSIC, SFIC, L-SAR, When ordering specify: Function, Trim, Finish and Core (if applicable)	J-SAR, J-			will	cont	ain

Screws
Available Fi	nishes - Specify for Liste	605	606	612	619	625	626	643e	626AM
A501-171, N52	23-092, L583-133, C603-256	i, C603-897
Part Number	Description	Door Thickness	Type	Size	Price Each
C603-256*	ANSI strike	_	PFH Combo	12-24 x 1"				$1	.00
C603-897*	Latch and strike	_	PFH Combo	#8 x 3/4"				$0	).92
N523-021*	Spring cage screws	1 3/8" – 2"	PFH Machine	#10 x 32 x 2 1/8"				$2	.00
*	Order in multiples of 100

Screw	Screw Packs
Available F	inishes - Specify for Listed Parts		605	606	612	619	625	626	643e	626AM
B202-517, C2	03-736, N123-020
Part Number	Description	Contents	Price Each
B202-517	Latch and strike	(4) C603-897	$8.50
C203-736	ANSI strike	(2) C603-256	$6.80
N223-049	Mounting kit	(4) C603-897 (1) N523-108 (2) 96954557 (1) N623-048 (1) N623-049				$1	3.90

Torx S	Torx Screw Packs
Available Fi	Available Finishes - Specify for Listed Parts			606	612	613	619	625	626	643e	626AM
C203-311, C203-312
Part Number	Description	Contents		Price Each
C203-311**	Latch and strike	(4) C503-766 (T-15)
C203-312**	Latch and ANSI strike	(2) C503-766 (T-15)	$21.90
		(2) L583-371 (T-20)
**

Cylinder Reference Table
Available Finishes - Specify for Listed Parts			606	636
23-065, 20-7	65/XP, 20-565/XP, 21-000	0-565/XP, 21-000		606	626
Part				Price Each
Number	Cylinder Mechanism	Function	Design	Open	Restricted
23-065	Conventional			$66.00	$84.00
20-765	Primus	Standard		$145.00
20-765-XP	Primus XP		All	$145.00
20-565	Primus UL437	Functions		¢170.00
20-565-XP	Primus UL437 XP			$179.00

Wood M	Wood Mounts
Part Number	Description	Price Each
44-184	NDE Series cylindrical mount	$423.00

ENGAGE Wireless Test Kit & Accessories
Part Number	Description	List Price
47271232	TKE - ENGAGE Test Kit. For use in pre-installation test applications. Comes with 2 TKE Transponders, ENGAGE gateway, tripod, TKE gateway bracket, battery, and backpack carry case.	$1,823.00
47269850	TKE Transponder	$567.00
47269870	TKE Gateway Backet (Tripod Adapter)	$46.40

CTE ENGAGE Single Door Controller

The CTE is an ENGAGE™ enabled single opening controller that allows perimeter and common area openings to be managed in a single system along with Schlage Control™ smart deadbolts, NDE cylindrical and LE mortise wireless locks. It is ideal for multi-family, commercial mixed use, and retail store front applications.

The CTE is designed to work with a Schlage® Multi-Technology credential reader and interface with an electrified lock, electromagnetic lock, electric strike, automatic operator or exit device to control an opening.

The CTE single door controller with multi-technology reader kit can be used in a variety of applications; below are a few examples.

Please note; all components are sold separately.

ENGAGE™ cloud via mobile device or Wi-Fi, or Software Alliance Member (SAM) via Wi-Fi or GWE with IP to host

Operation: Presenting a valid credential to Schlage MT XX-485 reader will cause fail secure 5100 electric strike to release for authorized entrance. Free egress always.

Products: We offer a variety of electric strikes from Locknetics™ and Von Duprin®, as well as Schlage Power Supplies to meet the specific needs of the opening.

ENGAGE™ cloud via mobile device or Wi-Fi, or Software Alliance Member (SAM) via Wi-Fi or GWE with IP to host

Operation: Presenting a valid credential to Schlage MT XX-485 will cause EL panic device to retract for authorized entrance. Free non-alarmed egress at all times.

Products: We offer a variety of Falcon® and Von Duprin exit devices, and Von Duprin power supplies to meet the specific needs of the opening.

ENGAGE™ cloud via mobile device or Wi-Fi, or Software Alliance Member (SAM) via Wi-Fi or GWE with IP to host

Operation: Presenting a valid credential to Schlage MT XX-485 will cause QEL panic device to retract for authorized entrance and enable exterior actuator. Free non-alarmed egress at all times. Interior actuator always active to retract QEL panic and open door.

Products: We offer a variety of hardware and accessories from Von Duprin, LCN®, Schlage and Locknetics to meet the specific needs of the opening.

Certifications: UL 294 Indoor, FCC Part 15, NEMA Enclosure Indoor (Type 1, 4, and 4X), ULC S319 Indoor, RoHS

CTE Series - How to Order: REOUIRED FIELDS Options MT15-485 CTE R 2. Reader Type MT11-485 Multi-Technology Mullion Mount MT15-485 Multi-Technology Single Gang Wall Mount 3. Cover Color (optional) Black - default G Grey BN Brown Cream

1-2. Select CTE Kit Reader Option

	CTE-MT11-485		$1,230.00
	CTE-MT15-485	CTE with Multi-Technology Single Reader Kit	$1,230.00
3. Select Color
	В	Black – Default	N/C
	G	Grey	N/C
	BN	Brown	N/C
	C	Cream	N/C

AD-SERIES NETWORKED - TABLE OF CONTENTS
HOW TO ORDER	86
AD-SERIES NETWORKED LOCKS & DEVICES OVERVIEW	87
AD-300 NETWORKED HARDWIRED Cylindrical Moritse/Mortise Deadbolt Exit Trim	100 101 102 104
AD-301 NETOWRKED HARDWIRED (FIPS 201-COMPLIANT) Cylindrical Mortise/Mortise Deadbolt Exit Trim	106 106 108 110
AD-400 NETWORKED WIRELESS Cylindrical Mortise/Mortise Deadbolt Exit Trim	112 112 114 116
AD-401 NETWORKED WIRELESS (FIPS 201-1 COMPLIANT) Cylindrical Mortise/Mortise Deadbolt Exit Trim	118 118 120 122
AD-SERIES 993 NON-FUNCTIONING "DUMMY" TRIM
AD-SERIES NETWORKED ACCESSORIES

CONTACT INFORMATION FOR AD-SERIES NETWORKED LOCKS & DEVICES

Payment Address: Schlage Electronic Security 15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service: Technical Support:
Order Status, Credit Returns of Non-Defective	Technical Questions/Issues, Returns of
Products, General Sales Questions	Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:
Order_Entry_Schlage_Commercial@allegion.com	Electronic_Lock_TechProdSupport@allegion.com

For AD-Series Networked Locks & Devices Warranty Information please see page 13.

AD-Series Networked • How to Order

How to Order: 1. Series 2. Class 300 Networked Hardwired 302 Networked Hardwired 400 Networked Wireless 402 Networked Wireless 3. Chassis: CY Cylindrical MS Mortise MD Mortise Deadbolt 993R Exit Trim – Rim/CVR/CVC 993S Exit Trim – SVR 993M Exit Trim – Mortise 993DT "Dummy" Exit Trim 4. Function: 70 Classroom/Storeroom 50 Office 40 Privacy 60 Apartment 5. Reader: KP Keypad MGK Magnetic Stripe + Keypad (Insert) MG Magnetic Stripe (Insert) MSK Magnetic Stripe + Keypad (Swipe) MS Magnetic Stripe (Swipe) MTK Multi-Technology + Keypad MT Multi-Technology FMK FIPS 201-2 Compliant Multi-Technology + Keypad 6. Lever: r SPA Sparta ATH Athens RHO Rhodes TLR Tubular BRW Broadway LAT Latitude BRK Boardwalk LON Longitude r To add tactile warning, use prefix 8. Example 8SPA 7. Finish: 626 Satin Chrome 605 Bright Brass 606 Satin Brass 612 Satin Bronze 619 Satin Nickel 625 Bright Chrome 643e Aged Bronze 626AM Satin Chrome (Antimicrobial Coating) 8. Cylinder Type: PD Schlage 6-pin Full Cylinder (For options see individual Class/Chassis page) 9. Keyway Type: S123 Everest 29 (For options see individual Class/Chassis page) 10. Handing: RH Right Handed LH Left Handed RHR Right Handed Reverse LHR Left Handed Reverse 11. Battery Holder: 4B - 4AA Battery Kit 8B - 8AA Battery Kit 12. Backset and Latch or Armor Front: 13-247 2-3/4" Backset, Deadlatch, Square Corner, 1-1/8" x 2-1/4" (Standard on CY Chassis) 09-663 Armor Front, 1-1/4" Wide, Square Corner (Standard on MS Chassis) For options see individual Class/Chassis page 13. Strike: 10-025 1-3/16" Lip, ANSI, no box, 1-1/4" x 4-7/8" (Standard on CY Chassis) 10-072 1-3/16" Lip, 1-1/4" x 4-7/8" square corner, box (Standard on MS Chassis) For options see individual Class/Chassis page 14. Door Thickness: 1-3/4" (Standard) For options see individual Class/Chassis page AD – 400 – CY – 70 – MG – SPA – 626 – PD – S123 – RH – 4B – 13-247 – 10-025 – 1-3/4 – BAA REQUIRED FIELDS FACTORY DEFAULT AND OPTIONS

15. Additional Options

AD-Series Networked Locks

With the AD-Series, one platform translates to an endless number of adaptable solutions. You can choose the features and functions that are right for the application today, and upgrade to meet your evolving needs in the future.

Class

AD-300	Networked/Hardwired; Direct RS-485 connection or Wiegand or Clock & Data
AD-302	FIPS 201-2 Compliant, Networked Hardwired; Direct RS-485 connection or Wiegand or Clock & Data
AD-400	Networked/Wireless; 900 MHz, Secure encrypted data transmission
AD-402	FIPS 201-2 Compliant, Networked Wireless; 900 MHz, Secure encrypted data transmission

Note: 1. AD-Series locks are upgradable from standalone to networked by applying a communication module available in the accessories section and new firmware available on www.schlage.com/support.

Chassis

CY: Cylindrical	Bored lock installed into round hole in the door
MS: Mortise	Lock case installed into a mortise rectangular "pocket" in the door
MD: Mortise Deadbolt	Mortise lock with built-in interconnected auxiliary deadbolt
993R: Exit Trim	Rim/Concealed Vertical Rod* (CVR) & Concealed Vertical Cable* (CVC) *Metal door only
993M: Exit Trim	Mortise
993S: Exit Trim	Surface Vertical Rod (SVR)
993DT: Exit Trim	Non-Functioning "Dummy" Exit Trim

Notes: 2. Mortise deadbolt requires RS-485 connection to the ACP, See pages 97-98 for system diagram. Check with access control software provider to verify function is enabled.

Exit Device Compatibility

Exit trim utilizes universal hardware to simplify installation to a variety of exit devices*.

Exit Device Compatibility		Rim	SVR	CVR/CVC	Mortise
Von Duprin	98/99 and 98/99XP	l	l	l †	l
Von Duprin	22/22F	l	l
Falcon	25	l

^* Low current request-to-exit switch is required. Part Number for Von Duprin request to exit switch: 050281. Part Number for Falcon AE switch: 650359. † Metal door only.

^3. Exit trim utilizes universal hardware to simplify installation to a variety of exit device. AD-Series networked locks require a request to exit switch, please see compatibility chart below.

AD-Series Networked

Function AD-300/302 AD-400/402 70: Classroom/ Storeroom Lockset is normally secure. Inside lever always allows free egress. Valid toggle credentials on the exterior may be used to change to a passage or secured status. 50: Office Lockset is normally secure. Inside lever always allows free egress. Interior pushbutton on inside housing may be used to select a passage or secured status. Meets need for lockdown function for safety and security. NOTE: Valid toggle credentials on the exterior may also be used to change status. Has interior pushbutton (IPB). 40: Privacy Lockset is normally secure. Inside lever always allows free egress. Interior pushbutton on inside housing may be used to select a privacy status. The interior pushbutton will disable normal electronic access from the exterior. Opening the door or pressing the interior pushbutton a second time on the inside housing deactivates the privacy status. Has interior pushbutton (IPB). 60: Apartment Lockset is normally secure. Inside lever always allows free egress. Interior pushbutton on inside housing may be used to select a passage or secured status. Opening the door or pressing the interior pushbutton causes the lockset to toggle unsecured. While toggled unsecured, the lockset can only be secured while the door is closed by pressing the interior pushbutton or using a normal credential on the exterior. Normal electronic access from the exterior is always allowed. Has interior pushbutton. LED LED Privacy button Privacy button

Reader

KP: Keypad	12 button design
MGK: Magnetic Stripe + Keypad (Insert)
MG: Magnetic Stripe (Insert)	Configurable to read the complete Track 1, 2 or 3.
MSK: Magnetic Stripe + Keypad (Swipe)	Available with and without 12 button keypad.
MS: Magnetic Stripe (Swipe)
MTK: Multi Technology + Keypad
FMK: FIPS 201-2 Compliant Multi Technology + Keypad	Single solution that reads 125 kHz proximity and 13.56 MHz smart credentials. Available with and without 12-button keypad
MT: Multi Technology
Si/SiK: Smart iClass Compatible Reader	13.56 MHz smart card credential solution compatible with Schlage MIFARE, HID iClass, iClass SE, and SEOS technologies. Available with and without 12-button keypad.

• Notes: 5. Please refer to AD-Series data sheets and solution sheets prior to ordering to verify credential compatibility.
  • 6. FMK reader now sold separately for field upgrades.
  • 7. Must specify finish when ordering reader separately. KP, MGK, MG, MSK & MS readers available in 626, 605, 606, 612, 619, 625 & 643e. MT, MTK & FMK readers are available in Grey (for 619, 626, 626AM & 625) and available in Brown (for 605, 606, 612 & 643e).

AD-Series Networked

Lever

RHO	Rhodes	5¹⁄₈" 3⁷⁄₁₆"
SPA	Sparta	5¹⁄₂" 3⁷⁄₁₆"
TLR	Tubular	5¹⁄₂" 3⁷⁄₁₆"
ATH	Athens	5¹⁄₈" 3⁷⁄₁₆"
BRW	Broadway	3.9" 2.7"
BRK	Boardwalk	5.0" 2.4"
LAT	Latitude	4.0" 2.8"
LON	Longitude	4.8" 2.4"

• Notes: 8. All lever designs are available in finishes 605, 606, 612, 619, 625, 626, 643E and 626AM.
  • 9. SPA, TLR & ATH Meet California Fire Code for 1/2" or less return to the door.
  • 10. Changing Lever Cylinder Compatibility on a device typically requires replacement of existing spring cage and tailpiece.
  • 11. To order tactile warning levers use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.
  • 12. AD Series, CO Series & ND Series levers may be interchangeable in some cases depending whether it is an interior or exterior lever, the type of chassis and the type of cylinder/ spring cage/ tail piece. Please consult the AD Series Parts guide for more information.

Finish

626	Satin Chrome	BHMA # 626E, Government # US26D
605	Bright Brass	BHMA # 605E, Government # US3
606	Satin Brass	BHMA # 606E, Government # US4
612	Satin Bronze	BHMA # 612E, Government # US10
619	Satin Nickel
625	Bright Chrome	BHMA # 625E, Government # US26
643e	Aged Bronze
626AM	Satin Chrome Antimicrobial

Note: 13. Please refer to the Electronic Access Control catalog or online product information at us.allegion.com to view each finish.

Cylinder

P	With cylinder Schlage- Everest 29 S123 6 Pin Key-in-Lever (KIL) Keyed different as standard with two keys
L	Less cylinder Schlage, Falcon 6 Pin Key-in-Lever (KIL)
R	With cylinder Schlage- Everest 29 S123 6 Pin Full Size Interchangeable Core (FSIC) Keyway one bitted as standard with two keys
J	Less cylinder Schlage 6 Pin Full Size Interchangeable Core (FSIC)
G	With cylinder Schlage Everest 29 R 7 Pin Small Format Interchangeable Core (SFIC) Factory master keyed with two keys as standard, master keying must be specified
B	Less cylinder Schlage, Falcon, Competitive OEM's 7 Pin Small Format Interchangeable Core (SFIC)	*Less Core
L SAR	Less cylinder Sargent (10L+11L) 6 Pin Key-in-Lever (KIL)
L CO6	Less cylinder 6 Pin Key-in-Lever (KIL)	*Less Core
J SAR	Less cylinder Sargent 6300 6 Pin Full Size Interchangeable Core (FSIC)
J CO6	Less cylinder Corbin 8000 6 Pin Full Size Interchangeable Core (FSIC)
J CO7	Less cylinder Corbin 8000-7 7 Pin Full Size Interchangeable Core (FSIC) (Only RHO, 8RO, SPA, 8SP, TLR, 8TR)
J MED	Less cylinder Medeco 32*0201 6 Pin Full Size Interchangeable Core (FSIC)
J YA6	Less cylinder Yale 1210 or Medeco 31*0100 6 Pin Full Size Interchangeable Core (FSIC)
J YA7	Less cylinder Yale 1220 7 Pin Full Size Interchangeable Core (FSIC)	*Less Core
L FA7	Less cylinder Falcon 7 Pin Key-in-Lever (KIL) (Only RHO, 8RO, SPA, 8SP lever styles)	*Less Core

Notes: 14. Competitor lever designs come in finishes 626 standard, and 605, 606, 612, 619, 625, 643e, and 626AM with extended lead-times.

• 15. For P, R and G -Master Keyed cylinders can be specified and will be shipped in lock packaging.
• 16. For Master Key System Summary form which should accompany the master keyed order, see pages 293-303.
• 17. For Master Keying, additional line item 50-210 is required for Classic and Everest cylinders.
• 18. Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
• 19. For additional assistance on Master Keying as well as restricted keyways please contact your local sales representative.
• 20.Spring cages & tail pieces are different based on the type of cylinder and chassis selected. Please see the AD-Series parts guide for more information.
• 21. The AD-Series accepts many popular models of standard, SFIC, and FSIC cylinders. Consult the Keyway/Cylinder compatibility datasheet (010432) for details. See pricebook for specific configurations.

AD-Series Networked

Key Systems Available Through Schlage

Everest 29™ S Keyway Family	Patent protected open keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats. Patent protection through 2029.
Everest 29 T Keyway Family	Patent protected restricted keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats. Patent protection through 2029.
Everest D Keyway Family	Restricted keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats.
Everest C Keyway Family	Open keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats.
Schlage Classic Open Keyways	Classic (C/E/F): Open keyways available in key in lever and full size interchangeable core designs
Everest B Keyway Family	Restricted keyways that are available on small format interchangeable core (SFIC).
Everest 29 R Keyway Family	Patent protected restricted keyways that are available on small format interchangeable core (SFIC). Patent protection through 2029.

Notes: 22. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order.

• 23. See sample Letter of Authorization page 305.
• 24. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line..
• 25. Contact your local RSO representative for assistance in determining which format and level of exclusivity best suits your needs.

Handing

RH	Right Handed: Hinges on Right Opens Inward
LH	Left Handed: Hinges on left Opens Inward
RHR	Right Handed Reverse: Hinges on Right Opens Outward
LHR	Left Handed Reverse: Hinges on Left Opens Outward

Notes: 26. Exit trim 993 chassis available only with RHR or LHR option.

27. Handing is field reversible, but requires removal of the exterior escutcheon cover. Please see AD-Series installation instructions for details.

Battery

Notes: 28. AD-300/AD-302 are hardwired and therefore do not require battery power and ship standard with a cover only and no batteries. 29. AD-Series locks use standard off the shelf AA batteries.

Backset & Latchbolt (Cylindrical Chassis)

13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"
43-001	5" Backset extension link, Deadlatch
39-030	Rabbeted latch and strike kit, 605 and 626 only. Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.	no image available

Mortise Lock Armor Front (Mortise/Mortise Deadbolt Chassis)

09-663	1-1/4" Wide Square Corner, Latch for MS
09-669	1-1/16" Wide Square Corner, Latch, options for MS	1-1/4" Wide	1-1/16" Wide
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	1-1/4" Wide	1-1/16" Wide

Notes: 30. For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE), use 1-1/4" wide armor front

^31. Available finishes are 605, 606, 612, 619, 625, and 626.

^32. Images not shown to scale. Consult AD-Series Parts Guide for more information.

Strike Plate (Cylindrical Chassis)

10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8",
10-013	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4", 1-1/2" Lip available, must specify 1-1/2" Lip
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch
K510-066	Box for ANSI strike (Must be specific)
10-072	1-3/16" Lip, 1-1/4" x 4-7/8", Square Corner, box
10-072	7/8", 1", 1-1/2", 1-3/4", or 2" Lip, 1-1/4" x 4-7/8", Square Corner, box
10-075	1/2" Rabbeted, For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front.
37-015	Strike Frame Reinforcer, specify 37-015
XL11-820	One hole for latching functions, RH & LHR doors Lip 1-3/16"
XL11-821	One hole for latching functions, LH & RHR doors Lip 1-3/16"
XQ07-351-134	Strike, ANSI, No Box, 1-1/4" x 4-7/8", 1-3/4" Lip Length	Image not available
XQ03-494-134	Strike, Square Corner, T-strike, Box, 1-1/8" x 2-3/4", 1-3/4" Lip	Image not available

Note: 33. XL11-820 & XL11-821 Extended lead time; contact customer service.

AD-Series Networked

Door Thickness

1-3/4"	1-3/4"
1-3/8"	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)

Notes: 34. Door Thickness Kits are available on page 226 to install a lock on a door that is thicker or thinner than 1-3/4". See AD-Series Parts guide for details. Locks cannot be installed on doors thicker than 2-3/4" or thinner than 1-3/8".

• 35. Thin Door Shims are available on page 226 to install a lock on a door that is thinner than 1-3/4".
• 36. Decorative Plates are used to cover exposed holes when retrofitting from existing locks to AD-Series locks. The size of plate required will vary based on the size and location of holes being covered. Retrofit information can be found at www.schlage.com/support.
• 37. If under the lock decorative plates are on both sides of device, then door will become 1/8" thicker. A Door Thickness Kit of an incremental 1/8" must be ordered to accommodate under the lock plates.

System Architecture for AD-300 & AD-400

The AD-Series combines all the hardware components required at the door for a complete access control system into one integrated design to simplify installation. This includes the electrified lock, credential reader, request-to-exit and -enter sensors, door position switch, tamper guard and more.

The AD-Series is available with flexible hardwired and wireless networked options and can accommodate Wiegand, Clock & Data or RS485 connections to the access control panel or reader interface board.

The following system configurations should be utilized as a guideline for specifying the AD-Series. Datasheets with technical specifications are available for download on www.schlage.com/support. We suggest that you consult with your Access Control Provider to verify the specific features, functions and capabilities of the AD-Series.

AD-300 Networked Hardwired Solution:

• Connections other than Wiegand or Clock & Data may incur an additional fee. Consult access control software provides for details.
• PIB300-2D required for Wiegand or Clock & Data connection; supports up to 2 AD-300 devices

AD-400 Networked Wireless Solution:

• Connections other than Wiegand or Clock & Data may incur an additional fee. Consult access control software provides for details.
• PIM400-TD2 required for Wiegand or Clock & Data connection; supports up to 2 AD-400 devices
• If RS485 connection to other ACP is required , contact software provider

System Architecture for AD-302 & AD-402

FIPS 201 Overview

• Federal Government Standard for secure and reliable form of identification
• Mandated by Homeland Security Presidential Directive 12 (HSPD 12)
• Required for all Federal Government employees and contractors
• Mandates the type of Smart Card and Card Reader per application
• The WPR401 (wireless portable reader) is available for remote credential verification

In order to meet requirements, the AD-Series can either be:

• 1.) Sold as a complete unit with the FMK Multi-Technology + Keypad Reader
• 2.) Field upgraded to a FIPS 201-2 compliant solution by adding the FMK reader (sold separately) and by utilizing the most current firmware available.

AD-302 Hardwired FIPS 201-2 compliant solution

• RS-485 or Wiegand communication to access control panel (ACP must be FIPS 201-2 compliant)
• FIPS 201-2 Multi-Technology Reader (FMK)

AD-402 Wireless FIPS 201-2 compliant solution

• 900 MHz communication between lock and PIM400-TD2
• FIPS Multi-Technology Reader (FMK)
• Connections other than Wiegand or Clock & Data may incur an additional fee. Consult access control software provider for details.
• f RS485 connection to ACP is required, contact software provider

AD-Series Networked Locks - Ordering Guide

Customer Name:
Customer Address:
Ship To:
Account #:
Quote #:
PO # & Date:
Price book #:
Shipping Instructions:
Requested Ship Date:
Order Written By:
For Further Information Contact (Name, Phone, Fax)

	Quantity	Series 1.	Class 2.	Chassis1 3.	Function2 4.	Reader3 5.	Lever 6.	Finish 7.	Cylinder 8.	Keyway 9.	Handing 10.	Battery4 11.	Backset & Latch5 or Armor Front6 12.	Strike7 13.	Door Thickness8 14.	Options 15.
Ex.	1	AD	400	CY	70	KP	SPA	626	PD	S123	RH	4B	13-247	10-025	1-3/4	BAA

Please complete all information above and email order to:

Order_Entry_Schlage_Commercial@allegion.com

¹ If Exit trim is chosen, no selections are required for options #12 & #13

² Function: 70 classroom storeroom is standard if no selection is made

³ Reader: KP keypad is standard if no selection is made

⁴ Battery: Cover only standard for AD-300, 4B standard if no selection is made for AD-400

⁵ Backset & Latch: 13-247 standard for cylindrical if no selection is made

⁶ Armor Front: 09-663 standard for mortise if no selection is made, 09-666 standard for mortise deadbolt if no selection is made

⁷ Strike Plate: 10-025 standard for cylindrical if no selection is made, 10-072 standard for mortise/mortise deadbolt if no selection is made

⁸ Door Thickness: 1-3/4" standard if no selection is made

AD-300 Networked Hardwired - Cylindrical

1-4. Select Chassis/Function Note: Locking function capabilities are determined by users access control system

AD-300-CY-70*	Classroom/Storeroom	$1,902.00
AD-300-CY-50*	Office r	$1,912.00
AD-300-CY-40	Privacy r	$1,912.00
AD-300-CY-60	Apartment r	$1,912.00

^* Less Door Position Switch, use suffix LDP. Deduct $19.50

r Requires RS485 connection to ACP. See page 97 for system diagram. Check with access control software provider to verify function is enabled.

AD-300-CY-70-MT

KP

MG

MGK

MS

MSK

MTK/SIK/FMK

MT/SI

5. Select Reader Note: Reflects list price adder to base keypad reader price of $553.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $553.00
KP	Keypad	STANDARD
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
MG	Magnetic Stripe (Insert)	$119.00
MGK	Magnetic Stripe (Insert) + Keypad	$190.00
MT	Multi-Technology | Proximity and Smart Card	$205.00
MTK	Multi-Technology + Keypad | Proximity and Smart Card	$272.00
SI	Smart Technology iClass Compatible Reader	$358.00
SIK	Smart Technology iClass Compatible Reader + Keypad	$422.00

FIPS 201-2 Compliant when applied with the FIPS Multi-Technology plus keypad reader module (FMK) and by utilizing the most current firmware available. See page 166 for the FMK reader module.

6. Select Lever*

LLL	Less each lever	DEDUCT $23.70
Standard	SPA (Sparta), RHO (Rhodes), ATH (Athens), TLR (Tubular), BRW, (Broadway),	N/C
Options	BRK (Boardwalk), LAT (Latitude), LON (Longitude)

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
Everest 29 S (Key in Lever or FSIC)	STANDARD
Everest C	N/C
Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
Everest 29 T	$18.00
Everest D	$18.00
Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
Everest 29 R	N/C
Everest B	N/C

AD-300 Networked Hardwired - Cylindrical

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

12. Select Backset & Latchbolt

LLL	Less Latch	DEDUCT $35.20
13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
43-001	5" Backset extension link, Deadlatch	$34.10
39-030*	Rabbeted latch and strike kit, 605 and 626 only	$59.80

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013*	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	N/C
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.00

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

15. Select Options

BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details. 2) Add PIB300-2D if Wiegand or Clock and Data connection to ACP is required. Sold Separately. See page 128 for details.

Accessories available, see pages 126-129.

Accessories include Panel Interface Board (PIB300-2D) Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-300 Networked Hardwired - Mortise/Mortise Deadbolt

1-3. Select Chassis

AD-300-MS	Mortise	$2,185.00
AD-300-MD	Mortise Deadboltr	$2,221.00

AD-300-MS-70-MTK

MS

4. Select Function Note: Locking function capabilities are determined by users access control system

70*	Classroom/Storeroom (Not available on mortise deadbolt)
50*	Office r (Not available on mortise deadbolt)	$10.00
40	Privacy r¢	$10.00
60	Apartment r¢	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

r Requires RS485 connection to ACP. See page 97 for system diagram. Check with access control software provider to verify function is enabled.

¢ Inside Push Button (IPB) only included with Mortise (MS) chassis. Mortise deadbolt (MD) chassis comes with LED indicator only. $10 charge does not apply to mortise deadbolt (MD) chassis.

5. Select Reader Note: Reflects list price adder to base keypad reader price of $553.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $553.00
KP	Keypad	STANDARD
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
MG	Magnetic Stripe (Insert)	$119.00
MGK	Magnetic Stripe (Insert) + Keypad	$190.00
MT	Multi-Technology | Proximity and Smart Card	$205.00
MTK	Multi-Technology + Keypad | Proximity and Smart Card	$272.00
SI	Smart Technology iClass Compatible Reader	$358.00
SIK	Smart Technology iClass Compatible Reader + Keypad	$422.00

FIPS 201-2 Compliant when applied with the FIPS Multi-Technology plus keypad reader module (FMK) and by utilizing the most current firmware available. See page 166 for the FMK reader module.

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.80
Standard Options	SPA (Sparta), RHO (Rhodes), ATH (Athens), TLR (Tubular), BRW, (Broadway), BRK (Boardwalk), LAT (Latitude), LON (Longitude)	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $ 65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate. For additional assistance on Master Keying as well as restricted keyways please contact customer service.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

AD-300 Networked Hardwired - Mortise/Mortise Deadbolt

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

	Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

Cover Only	No batteries or holder	STANDARD

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD	STANDARD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075 Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C
XL11-820 r	One hole for latching functions, RH & LHR doors Lip 1-3/16"	$13.40
XL11-821 r	One hole for latching functions, LH & RHR doors Lip 1-3/16"	$13.40

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.700

15. Select Options

BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details. 2) Add PIB300-2D if Wiegand or Clock and Data connection to ACP is required. Sold Separately. See page 128 for details.

Accessories available, see pages 126-129.

Accessories include Panel Interface Board (PIB300-2D) Decorative Plates, Handheld Device, etc.

Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-300 Networked Hardwired - Exit Trim

1-3. Select Chassis/Trim Type Note: See page 87 for exit device compatibility

AD-300-993R	Exit Rim/Concealed Vertical Rod (Metal Door)/Concealed Vertical Cable (Metal Door)	$2,237.00
AD-300-993S	Exit Surface Vertical Rod	$2,266.00
AD-300-993M	Exit Mortise Lock	$2,266.00

70*	Classroom/Storeroom		STANDARD
50*	Office r		$10.00
40	Privacy r		$10.00
60	Apartment r		$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

5. Select Reader Note: Reflects list price adder to base keypad reader price of $553.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $553.00
KP	Keypad	STANDARD
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
MG	Magnetic Stripe (Insert)	$119.00
MGK	Magnetic Stripe (Insert) + Keypad	$190.00
MT	Multi-Technology | Proximity and Smart Card	$205.00
MTK	Multi-Technology + Keypad | Proximity and Smart Card	$272.00
SI	Smart Technology iClass Compatible Reader	$358.00
SIK	Smart Technology iClass Compatible Reader + Keypad	$422.00

FIPS 201-2 Compliant when applied with the FIPS Multi-Technology plus keypad reader module (FMK) and by utilizing the most current firmware available. See page 166 for the FMK reader module.

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.90
Standard Options	SPA (Sparta), RHO (Rhodes), ATH (Athens), TLR (Tubular), BRW, (Broadway), BRK (Boardwalk), LAT (Latitude), LON (Longitude)	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

AD-300-993R-70-MTK

MG

MGK

MS

MSK

MT/SI

MTK/SIK/FMK

r Requires RS485 connection to ACP. See page 97 for system diagram. Check with access control software provider to verify function is enabled.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6

Small Format Interchangeable Core GD BD

9. Select Keying Type

	Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

Cover Only	No batteries or holder	STANDARD

12.-13. No Selection Required

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

15. Select Options

LRX	Less Von Duprin low current Request-To-Exit switch	DEDUCT $53.60
BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

AD-300 Exit Trim comes with a universal mounting plate and is compatible with Von Duprin Series 98/99, 98/99XP, 22/22F exit devices and Falcon 25 rim exit devices with proper low current Request-To-Exit switch (RX-LC). Concealed Vertical Rod and Concealed Vertical Cable trim on metal door only.

When Request-to-exit is required, the Von Duprin RX-LC switch (part #050281) or Falcon AE switch (part #650359) must be used or the Warranty is void.

Note: AD-Series Non-Functioning "Dummy" Exit Trim now available. Please see pages 124-125 for details

• Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details.
  • 2) Add PIB300-2D if Wiegand or Clock and Data connection to ACP is required. Sold Separately. See page 128 for details.

Accessories available, see pages 126-129.

Accessories include Panel Interface Board (PIB300-2D) Decorative Plates, Handheld Device, etc.

Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-302 Networked Hardwired - Cylindrical (FIPS 201-2 Compliant)

1-4. Select Chassis/Function

Note: Locking function capabilities are determined by users access control system

AD-302-CY-70*	Classroom/Storeroom	$1,902.00
AD-302-CY-50*	Office	$1,912.00
AD-302-CY-40	Privacyr	$1,912.00
AD-302-CY-60	Apartmentr	$1,912.00

^* Less Door Position Switch, use suffix LDP. Deduct $19.50

r Requires RS485 connection to ACP. See page 98 for system diagram. Check with Access Control software provider to verify function is enabled.

AD-302-CY-70-FMK

5. Select Reader

Note: The AD-300 lock can be field upgraded to a FIPS 201-2 compliant solution simply by adding the FMK reader (sold separately) and by using the most current firmware revision.

Note: Verify compatibility of PIV & PIV-I credentials with access control software provider.

6. Select Lever*

LLL	Less each lever	DEDUCT $23.00
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

AD-302 Networked Hardwired - Cylindrical (FIPS 201-2 Compliant)

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

Cover Only	No batteries or holder	STANDARD

12. Select Backset & Latchbolt

LLL	Less Latch	DEDUCT $35.20
13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
43-001	5" Backset extension link, Deadlatch	$34.10
39-030*	Rabbeted latch and strike kit, 605 and 626 only	$59.80

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013**	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	N/C
K510-066	Box for ANSI strike (Must be specific)	N/C

^{** 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.00

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

15. Select Options

BAA BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details. 2) Add PIB300-2D if Wiegand or Clock and Data connection to ACP is required. Sold Separately. See page 128 for details.

Standard accessories available, see pages 126-129.

Standard accessories sold separately include Decorative Plates, Handheld Device, Dry Contact Board (RLBD), etc.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, See page 293.

AD-302 Networked Hardwired - Mortise/Mortise Deadbolt (FIPS 201-2 Compliant)

1-3. Select Chassis

AD-302-MS	Mortise	$2,185.00
AD-302-MD	Mortise Deadboltr	$2,249.00

AD-302-MS-70-FMK

4. Select Function

Note: Locking function capabilities are determined by users access control system

70*	Classroom/Storeroom (Not available on mortise deadbolt)	STANDARD
50*	Office r (Not available on mortise deadbolt)	$10.00
40	Privacy r£	$10.00
60	Apartment r£	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $19.50

5. Select Reader

FMK	FIPS 201-2 Multi-Technology + Keypad | Proximity and Smart Card (PIV & PIV-I Card)	$487.00

Note: The AD-300 lock can be field upgraded to a FIPS 201-2 compliant solution simply by adding the FMK reader (sold separately) and by using the most current firmware revision.

Note: Verify compatibility of PIV & PIV-I credentials with access control software provider.

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.80
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

r Requires RS485 connection to ACP. See page 98 for system diagram. Check with access control software provider to verify function is enabled.

^£ Inside Push Button (IPB) only included with Mortise (MS) chassis. Mortise deadbolt (MD) chassis comes with LED indicator only. $10 charge does not apply to mortise deadbolt (MD) chassis.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

Cover Only	No batteries or holder	STANDARD

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD	STANDARD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075 Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.700

15. Select Options

	BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details. 2) Add PIB300-2D if Wiegand or Clock and Data connection to ACP is required. Sold Separately. See page 128 for details.

Standard accessories available, see pages 126-129.

Standard accessories sold separately include Decorative Plates, Handheld Device, Dry Contact Board (RLBD), etc.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-302 Networked Hardwired - Exit Trim (FIPS 201-2 Compliant)

1-3. Select Chassis/Exit Trim Type*

AD-302-993R	Exit Rim/† Concealed Vertical Rod/† Concealed Vertical Cable	$2,237.00
AD-302-993S	Exit Surface Vertical Rod	$2,262.00
AD-302-993M	Exit Mortise Lock	$2,262.00

^* See page 87 for exit device compatibility. † Metal door only.

AD-302-993R-70-FMK

4. Select Function Note: Locking function capabilities are determined by users access control system

70*	Classroom/Storeroom	STANDARD
50*	Office r	$10.00
40	Privacy r	$10.00
60	Apartment r	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

5. Select Reader

	FMK	FIPS 201-2 Multi-Technology + Keypad | Proximity and Smart Card (PIV & PIV-I Card)	$487.00

Note: The AD-300 lock can be field upgraded to a FIPS 201-2 compliant solution simply by adding the FMK reader (sold separately) and by using the most current firmware revision.

Note: Verify compatibility of PIV & PIV-I credentials with access control software provider.

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.90
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r Requires RS485 connection to ACP. See page 98 for system diagram. Ensure function is enabled through access control software provider.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

AD-302 Networked Hardwired - Exit Trim (FIPS 201-2 Compliant)

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

Cover Only No batteries or holder	STANDARD

12. -13. No Selection Required

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$58.90

15. Select Options

LRX	Less Von Duprin low current Request-To-Exit switch	DEDUCT $53.60
BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

AD-302 Exit Trim comes with a universal mounting plate and is compatible with Von Duprin Series 98/99, 98/99XP, 22/22F exit devices and Falcon 25 rim exit devices . RX-LC switch is included unless lock is ordered as LRX, Less Request to Exit switch. Please specify if Von Duprin or Falcon RX-LC switch is required. Concealed Vertical Rod and Concealed Vertical Cable trim on metal door only. When Request-to-exit is required, the Von Duprin RX-LC switch (part #050281) or Falcon AE switch (part #650359) must be used or the Warranty is void.

Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details. 2) Add PIB300-2D if Wiegand or Clock and Data connection to ACP is required. Sold Separately. See page 128 for details.

Standard accessories available, see pages 126-129.

Standard accessories sold separately include Decorative Plates, Handheld Device, Dry Contact Board (RLBD), etc.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-400 Networked Wireless - Cylindrical

1-4. Select Chassis/Function Note: Locking function capabilities are determined by users access control system

AD-400-CY-70*	Classroom/Storeroom	$2,119.00
AD-400-CY-50*	Office	$2,129.00
AD-400-CY-40	Privacyr	$2,129.00
AD-400-CY-60	Apartmentr	$2,129.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

r Requires RS485 connection to ACP. See page 97 for system diagram. Check with access control software provider to verify function is enabled.

AD-400-CY-70-MG

MS

MSK

MT/SI

5. Select Reader Note: Reflects list price adder to base keypad reader price of $553.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $553.00
KP	Keypad	STANDARD
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
MG	Magnetic Stripe (Insert)	$119.00
MGK	Magnetic Stripe (Insert) + Keypad	$190.00
MT	Multi-Technology | Proximity and Smart Card	$205.00
MTK	Multi-Technology + Keypad | Proximity and Smart Card	$272.00
SI	Smart Technology iClass Compatible Reader	$358.00
SIK	Smart Technology iClass Compatible Reader + Keypad	$422.00

FIPS 201-2 Compliant when applied with the FIPS Multi-Technology plus keypad reader module (FMK) and by utilizing the most current firmware available. See page 166 for the FMK reader module.

6. Select Lever*

LLL	Less each lever	DEDUCT $23.70
Standard	SPA (Sparta), RHO (Rhodes), ATH (Athens), TLR (Tubular), BRW, (Broadway),	N/C
Options	BRK (Boardwalk), LAT (Latitude), LON (Longitude)

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate. For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. Select Backset & Latchbolt

LLL	Less Latch	DEDUCT $35.20
13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
43-001	5" Backset extension link, Deadlatch	$34.10
39-030*	Rabbeted latch and strike kit, 605 and 626 only	$59.80

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013*	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	N/C
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.00

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

15. Select Options

BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details.

• 2) PIM400 required for connection to ACP; sold separately.
• a) PIM400-TD2 required for Wiegand or Clock and Data connection, See page 128.
  • b) If RS485 connection to other ACP is required, contact software provider.

Accessories available, see pages 126-129. Accessories include Panel Interface Module (PIM400) Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-400 Networked Wireless - Mortise/Mortise Deadbolt

1-3. Select Chassis

AD-400-MS	Mortise	$2,330.00
AD-400-MD	Mortise Deadboltr	$2,367.00

AD-400-MS-70-MGK

• * Less Door Position Switch, use suffix LDP. Deduct $20.10
• r Requires RS485 connection to ACP. See page 97 for system diagram. Check with access control software provider to verify function is enabled.
• ¢ Inside Push Button (IPB) only included with Mortise (MS) chassis. Mortise deadbolt (MD) chassis comes with LED indicator only. $10 charge does not apply to mortise deadbolt (MD) chassis.

5. Select Reader Note: Reflects list price adder to base keypad reader price of $553.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $553.00
KP	Keypad	STANDARD
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
MG	Magnetic Stripe (Insert)	$119.00
MGK	Magnetic Stripe (Insert) + Keypad	$190.00
MT	Multi-Technology | Proximity and Smart Card	$205.00
MTK	Multi-Technology + Keypad | Proximity and Smart Card	$272.00
SI	Smart Technology iClass Compatible Reader	$358.00
SIK	Smart Technology iClass Compatible Reader + Keypad	$422.00

FIPS 201-2 Compliant when applied with the FIPS Multi-Technology plus keypad reader module (FMK) and by utilizing the most current firmware available. See page 166 for the FMK reader module.

KP

MT/SI

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.80
Standard	SPA (Sparta), RHO (Rhodes), ATH (Athens), TLR (Tubular), BRW, (Broadway),	N/C
Options	BRK (Boardwalk), LAT (Latitude), LON (Longitude)

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate. For additional assistance on Master Keying as well as restricted keyways please contact customer service.

AD-400 Networked Wireless - Mortise/Mortise Deadbolt

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

	Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

• see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.
• 3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD	STANDARD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075 Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

15. Select Options

BAA BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details. 2) PIM400 required for connection to ACP; sold separately.

• a) PIM400-TD2 required for Wiegand or Clock and Data connection, See page 128.
• b) If RS485 connection to other ACP is required, contact software provider.

Accessories available, see pages 126-129. Accessories include Panel Interface Module (PIM400) Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

AD-400 Networked Wireless - Exit Trim

1-3. Select Chassis/Exit Trim Type Note: See page 87 for exit device compatibility

AD-400-993R	Exit Rim/Concealed Vertical Rod (Metal Door)/Concealed Vertical Cable (Metal Door)	$2,472.00
AD-400-993S	Exit Surface Vertical Rod	$2,502.00
AD-400-993M	Exit Mortise Lock	$2,502.00

AD-400-993R-70-MTK

KP

MG

MGK

MS

MSK

MTK/SI/FMK

MT/SI

4. Select Function Note: Locking function capabilities are determined by users access control system

70*	Classroom/Storeroom	STANDARD
50*	Office r	$10.00
40	Privacy r	$10.00
60	Apartment r	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $19.50

r Requires RS485 connection to ACP. See page 97 for system diagram. Ensure function is enabled through access control software provider.

5. Select Reader Note: Reflects list price adder to base keypad reader price of $553.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $553.00
KP	Keypad	STANDARD
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
MG	Magnetic Stripe (Insert)	$119.00
MGK	Magnetic Stripe (Insert) + Keypad	$190.00
MT	Multi-Technology | Proximity and Smart Card	$205.00
MTK	Multi-Technology + Keypad | Proximity and Smart Card	$272.00
SI	Smart Technology iClass Compatible Reader	$358.00
SIK	Smart Technology iClass Compatible Reader + Keypad	$422.00

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.90
Standard Options	SPA (Sparta), RHO (Rhodes), ATH (Athens), TLR (Tubular), BRW, (Broadway), BRK (Boardwalk), LAT (Latitude), LON (Longitude)	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. - 13. No Selection Required

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

15. Select Options

LRX	Less Von Duprin low current Request-To-Exit switch	DEDUCT $52.00
BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

AD-300 Exit Trim comes with a universal mounting plate and is compatible with Von Duprin Series 98/99, 98/99XP, 22/22F exit devices and Falcon 25 rim exit devices . RX-LC switch is included unless lock is ordered as LRX, Less Request to Exit switch. Please specify if Von Duprin or Falcon RX-LC switch is required. Concealed Vertical Rod and Concealed Vertical Cable trim on metal door only. When

Request-to-exit is required, the Von Duprin RX-LC switch (part #050281) or Falcon AE switch (part #650359) must be used or the Warranty is void.

Note: AD-Series Non-Functioning "Dummy" Exit Trim now available. Please see pages 124-125 for details

Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details.

• 2) PIM400 required for connection to ACP; sold separately.
  • a) PIM400-TD2 required for Wiegand or Clock and Data connection, See page 128.
• b) If RS485 connection to other ACP is required, contact software provider.

Accessories available, see pages 126-129.

Accessories include Panel Interface Mobile (PIM400) Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-402 Networked Wireless - Cylindrical (FIPS 201-2 Compliant)

1-4. Select Chassis/Function

Note: Locking function capabilities are determined by users access control system

AD-402-CY-70*	Classroom/Storeroom	$2,119.00
AD-402-CY-50*	Office	$2,129.00
AD-402-CY-40	Privacyr	$2,129.00
AD-402-CY-60	Apartmentr	$2,129.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

r Requires RS485 connection to ACP. See page 98 for system diagram. Check with Access Control software provider to verify function is enabled.

AD-402-CY-70-FMK

5. Select Reader

FMK FIPS 201-2 Multi-Technology + Keypad | Proximity and Smart Card (PIV & PIV-I Card) $487.00

Note: The AD-400 lock can be field upgraded to a FIPS 201-2 compliant solution simply by adding the FMK reader (sold separately) and by using the most current firmware revision.

Note: Verify compatibility of PIV & PIV-I credentials with access control software provider.

6. Select Lever*

LLL	Less each lever	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

AD-402 Networked Wireless - Cylindrical (FIPS 201-2 Compliant)

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. Select Backset & Latchbolt

LLL	Less Latch	DEDUCT $35.20
13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
43-001	5" Backset extension link, Deadlatch	$34.10
39-030*	Rabbeted latch and strike kit, 605 and 626 only	$59.80

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013*	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	N/C
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.00

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

15. Select Options

BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details. 2) PIM400 required for connection to ACP; sold separately.

a) PIM400-TD2 required for Wiegand or Clock and Data connection, See page 128.

b) If RS485 connection to other ACP is required, contact software provider.

Standard accessories available, see pages 126-129.

Standard accessories sold separately include Decorative Plates, Handheld Device, Dry Contact Board (RLBD), etc.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-402 Networked Wireless - Mortise/Mortise Deadbolt (FIPS 201-2 Compliant)

1-3. Select Chassis

AD-402-MS-70-FMK

4. Select Function

Note: Locking function capabilities are determined by users' access control system

70*	Classroom/Storeroom (Not available on mortise deadbolt)	STANDARD
50*	Office r (Not available on mortise deadbolt)	$10.00
40	Privacy r¢	$10.00
60	Apartment r¢	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

• r Requires RS485 connection to ACP. See page 98 for system diagram. Check with access control software provider to verify function is enabled.
• ¢ Inside Push Button (IPB) only included with Mortise (MS) chassis. Mortise deadbolt (MD) chassis comes with LED indicator only. $10 charge does not apply to mortise deadbolt (MD) chassis.

5. Select Reader

FMK FIPS 201-2 Multi-Technology + Keypad | Proximity and Smart Card (PIV & PIV-I Card) $487.00

Note: The AD-400 lock can be field upgraded to a FIPS 201-2 compliant solution simply by adding the FMK reader (sold separately) and by using the most current firmware revision.

Note: Verify compatibility of PIV & PIV-I credentials with access control software provider.

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.80
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

AD-402 Networked Wireless - Mortise/Mortise Deadbolt (FIPS 201-2 Compliant)

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

• see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.
• 3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD	STANDARD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075 Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

15. Select Options

BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details. 2) PIM400 required for connection to ACP; sold separately.

a) PIM400-TD2 required for Wiegand or Clock and Data connection, See page 128

b) If RS485 connection to other ACP is required, contact software provider.

Accessories available, see pages 126-129. Accessories include Panel Interface Module (PIM400) Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

AD-402 Networked Wireless - Exit Trim (FIPS 201-2 Compliant)

1-3. Select Chassis/Exit Trim Type*

AD-402-993R	Exit Rim/† Concealed Vertical Rod/† Concealed Vertical Cable	$2,472.00
AD-402-993S	Exit Surface Vertical Rod	$2,502.00
AD-402-993M	Exit Mortise Lock	$2,502.00

^* See page 87 for exit device compatibility. † Metal door only.

AD-402-993R-70-FMK

4. Select Function Note: Locking function capabilities are determined by users access control system

70*	Classroom/Storeroom	STANDARD
50*	Office r	$10.00
40	Privacy r	$10.00
60	Apartment r	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

5. Select Reader

FMK	FIPS 201-2 Multi-Technology + Keypad | Proximity and Smart Card (PIV & PIV-I Card)	$487.00

Note: The AD-400 lock can be field upgraded to a FIPS 201-2 compliant solution simply by adding the FMK reader (sold separately) and by using the most current firmware revision.

Note: Verify compatibility of PIV & PIV-I credentials with access control software provider.

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.90
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

r Requires RS485 connection to ACP. See page 98 for system diagram. Ensure function is enabled through access control software provider.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

AD-402 Networked Wireless - Exit Trim (FIPS 201-2 Compliant)

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. -13. No Selection Required

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

15. Select Options

LRX	Less Von Duprin low current Request-To-Exit switch	DEDUCT $53.60
BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

AD-402 Exit Trim comes with a universal mounting plate and is compatible with Von Duprin Series 98/99, 98/99XP, 22/22F exit devices and Falcon 25 rim exit devices with proper low current Request-To-Exit switch (RX-LC). Concealed Vertical Rod and Concealed Vertical Cable trim on metal door only.

When Request-to-exit is required, the Von Duprin RX-LC switch (part #050281) or Falcon AE switch (part #650359) must be used or the Warranty is void.

Note: AD-Series Non-Functioning "Dummy" Exit Trim now available. Please see pages 124-125 for details

• Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details.
  • 2) PIM400 required for connection to ACP; sold separately.
• a) PIM400-TD2 required for Wiegand or Clock and Data connection, See page 128.
• b) If RS485 connection to other ACP is required, contact software provider.

Standard accessories available, see pages 126-129.

Standard accessories sold separately include Decorative Plates, Handheld Device, Dry Contact Board (RLBD), etc.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-993DT – Non-Functioning "Dummy" Trim for Exit

1-4. Select Chassis/ Exit Trim Type* /Reader

AD-993LLL	"Dummy" Trim Less Reader for Exit Rim/† Concealed Vertical Rod/†Concealed Vertical Cable /Surface Vertical Rod/Mortise Lock	See page 162
AD-993DT	"Dummy" Trim with "Dummy" Reader Cover for Exit Rim/† Concealed Vertical Rod/Surface Vertical Rod/ Mortise Lock	See page 162

^* See page 87 for exit device compatibility. † Metal door only.

AD993DT

5. Select Lever*

LLL	Less interior and exterior levers	See page 162
SPA	Sparta	See page 162
RHO	Rhodes	See page 162
ATH	Athens	See page 162
TLR	Tubular	See page 162
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

6. Select Finish

626	Satin Chrome	See page 162
605	Bright Brass	See page 162
606	Satin Brass	See page 162
612	Satin Bronze	See page 162
619	Satin Nickel	See page 162
625	Bright Chrome	See page 162
643e	Aged Bronze	See page 162
626AM	Satin Chrome Antimicrobial	See page 162

7. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	See page 162
L	With Cylinder, Schlage- Everest 29 S123, 6 Pin KIL	See page 162
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	See page 162
J	Less cylinder, Schlage, 6 Pin FSIC	See page 162
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	See page 162
B	Less cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	See page 162
L SAR	Less cylinder, Sargent (10L + 11L), 6 Pin KIL	See page 162
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	See page 162
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	See page 162
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	See page 162
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	See page 162
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	See page 162
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	See page 162
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	See page 162
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	See page 162

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate. For additional assistance on Master Keying as well as restricted keyways please contact customer service.

AD-993DT – Non-Functioning "Dummy" Trim for Exit

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

8. Select Keying Type

	Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	See page 163
C/CE/E/EF/ F/ FG/ G	Classic Obverse	See page 163
	Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	See page 163
D	Everest D	See page 163
Classic Restricted	Quad, Numbered, Reverse	See page 163
Restricted Keyway Families: SFIC3
29R	Everest 29 R	See page 163
B	Everest B	See page 163

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

• see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.
• 3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

9. Select Handing (Field Reversible)

RHR	Right Handed Reverse	See page 163
LHR	Left Handed Reverse	See page 163

10. - 12. No Selection Required

13. Select Door Thickness

134	1-3/4"	See page 163
Example 178	1-7/8" to 2-3/4", (Specify in 1/8" increments)	See page 163

14. Select Options

BAA	BAA Compliant Product	See page 163

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

AD-Series Exit Trim

The AD993DT Non-Functioning "Dummy" Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99 and 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Surface Vertical Rod, Mortise. Low current Request-to-Exit Switch optional for future network migration.

Von Duprin 22/22F

Rim, Surface Vertical Rod

Falcon 25 - Rim

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 Kit)

Accessories available, see pages 126-129. Accessories include Panel Interface Mobile (PIM400) Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

Product ID	Product Description	Product Specification	Price
Handheld Device
	HHD KIT-USB Handheld Device Kit	Includes Handheld Device pre-loaded with SUS Application, and HHD-USB Cable. Used to initialize, manage, and test AD and CO Series devices	See page 166
HH-USB	USB Replacement Cable	Used to connect Handheld Device to USB locks and accessories.	See page 166
	Handheld Device Accessories (Legacy Product Support)
HH-2PIN SERIAL	Serial Cable	Used to connect current model HHD (BM170) directly to legacy serial products without the need of a CIP	See page 166
HH-SERIAL	Serial Cable *	Used to connect previous model HHD (BM150) with CIP to program serial products.	See page 166
PIMWA-CV	Null Converter	Used to connect Handheld Device to WA Series PIM, using HH-SERIAL Serial Cable. (compatible to current and previous model HHDs)	See page 166
P512112	Computer Interface Module (CIP)*	Used to program serial products using HH-SERIAL Serial Cable.	See page 166
P101203	CIP with iButton Reader*	Used to program serial products using HH-SERIAL Serial Cable.	See page 166
	* Not compatible to current HHD (BM170)

Reader Modules - (Select by Technology) - (Please specify FINISH -Example: KP-626)

KP	Keypad Only Reader Module	See page 166
MG	Magnetic Stripe (Insert) Reader Module - (Track 1, 2, or 3)	See page 166
MGK	Magnetic Stripe (Insert) with Keypad Reader Module - (Track 1, 2, or 3)	See page 166
MS	Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	See page 166
MSK	Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	See page 166
MT	Multi-Technology Reader Module - (125 kHz Proximity and 13.56 MHz Smart)	See page 166
MTK	Multi-Technology with Keypad Reader Module - (125 kHz Proximity and 13.56 MHz Smart)	See page 166
SI	Smart Technology iClass Compatible Reader	See page 166
SIK	Smart Technology iClass Compatible Reader + Keypad	See page 166
FMK	FIPS Multi-Technology with Keypad Reader Module - (125 kHz Proximity and 13.56 MHz Smart)	See page 166
DT	Dummy Trim Reader Cover	See page 166

Reader Module Accessories

510310	Magnetic Stripe Cleaning Cards	See page 166

Communication Module Kits - (Please specify FINISH - Example: COM200C-626)

COM200C	AD-200/AD-250 Offline Communication Kit (Cover)	Classroom/Storeroom Functions (Cylindrical and Exit Chassis)	See page 166
COM200Lu	AD-200/AD-250 Offline Communication Kit (Cover with Indicator Lens)	Privacy/Apartment Functions (Mortise Deadbolt Chassis)	See page 166
COM200Pu	AD-200/AD-250 Offline Communication Kit (Cover with Push Button)	Privacy/Apartment/Office Functions (Cylindrical and Mortise Chassis)	See page 166
COM300Lun	AD-300 Hardwired Communication Kit (Cover with Indicator Lens, RS485 Communication PCB)	Classroom/Storeroom Functions (Cylindrical, Mortise and Exit Chassis) Privacy/Apartment Functions (Mortise Deadbolt Chassis)	See page 166
COM300Pun	AD-300 Hardwired Communication Kit (Cover with Push Button, RS485 Communication PCB)	Privacy/Apartment/Office Functions (Cylindrical and Mortise Chassis)	See page 166
COM400Lun	AD-400 Wireless Communication Kit (Cover with Indicator Lens, 900MHz Communication PCB)	Classroom/Storeroom Functions (Cylindrical, Mortise and Exit Chassis) Privacy/Apartment Functions (Mortise Deadbolt Chassis)	See page 166
COM400Pun	AD-400 Wireless Communication Kit (Cover with Push Button, 900MHz Communication PCB)	Privacy/Apartment/Office Functions (Cylindrical and Mortise Chassis)	See page 166

u Must order and install Door Position Switch #46929121 for proper operation

n Must order and install Pigtail Exit Adapter #23536774 for RX-LC switch if retrofitting AD-200-993 to AD-300-993 or AD-400-993

	Class	Chassis	Type	Classroom/ Storeroom (70)	Office (50)	Apartment (60)	Privacy (40)
	AD-200 & AD-250	CY	Cylindrical	COM200C	COM200P	COM200P	COM200P
OFFLINE	AD-200 & AD-250	MS	Mortise	COM200C	COM200P	COM200P	COM200P
	AD-200 & AD-250	MD	Mortise Deadbolt	N/A	N/A	COM200L	COM200L
	AD-200 & AD-250	993	Exit Trim	COM200C	N/A	N/A	N/A
	AD-300	CY	Cylindrical	COM300L	COM300P	COM300P	COM300P
	AD-300	MS	Mortise	COM300L	COM300P	COM300P	COM300P
NETWORKED	AD-300	MD	Mortise Deadbolt	N/A	N/A	COM300L	COM300L
	AD-300	993	Exit Trim	COM300L	N/A	N/A	N/A
	AD-400	CY	Cylindrical	COM400L	COM400P	COM400P	COM400P
	AD-400	MS	Mortise	COM400L	COM400P	COM400P	COM400P
	AD-400	MD	Mortise Deadbolt	N/A	N/A	COM400L	COM400L
	AD-400	993	Exit Trim	COM400L	N/A	N/A	N/A

Suffixes: C= Cover L= LED Only P= Pushbutton

Note: Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control provider for details.

Product ID	Product Description	Price
Door Position Switch
46929121	Door Position Switch	See page 226
	Battery Cover - (Select by Battery Quantity) - (Please specify FINISH - Example: 4C-626)
4C (46929071)	4AA Battery Cover (with Screw)	See page 227
8C (46929105)	8AA Battery Cover (with Screw)	See page 227
	Battery Holder & Cover Kit - (Select by Battery Quantity) - (Please specify FINISH - Example: 4B-626)
	4B (46929055) 4AA Battery Holder & Cover Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, Battery Strap Screws, 4AA Battery Cover, Cover Screw, Torx Cover Screw)	See page 227
	8B (46929089) 8AA Battery Holder & Cover Kit (Includes 8AA Battery Holder with Cable, 8AA Battery Strap, Battery Strap Screws, 8AA Battery Cover, Cover Screw, Torx Cover Screw, Mylar)	See page 227
	Torx Tamper Screw Pack - (Select by Chassis Type) - (Please specify FINISH - Example: 23538812-626)
Cylindrical
23538812	Torx Tamper Screw Pack	See page 227
Mortise
23538820	Torx Tamper Screw Pack	See page 227
Exit	Torx Tamper Screw Pack
23538838		See page 227
	Decorative Plate - (Select by Size) - (Please specify FINISH - Example: 23760283-626)
23631823	1.5" x 3.25" x .105" Decorative Plate (with Screws) - (Exit Trim)	See page 226
23760267	1.7" x 3.5" x .075" Decorative Plate (with Screws)	See page 226
23760283	3.2" x 3.5" x .075" Decorative Plate (with Screws)	See page 226
23760317	6.0" x 3.5" x .075" Decorative Plate (with Screws)	See page 226
23760325	6.6" x 3.5" x .075" Decorative Plate (with Screws)	See page 226
23760309	8.0" x 3.5" x .075" Decorative Plate (with Screws)	See page 226
23760291	8.0" x 3.5" x .075" Decorative Plate (with Screws and Welded Standoff)	See page 226
23760259*	10.5" x 3.5" x .075" Decorative Plate (no Screws necessary) - (Under Lock)	See page 226
23760275*	12.0" x 3.5" x .075" Decorative Plate (no Screws necessary) - (Under Lock)	See page 226
	*Please consider overall Door Thickness when ordering
	Note: Single Decorative Plate. Interior and Exterior Decorative Plates may be required. Note: Decorative Plates may have multiple applications. Please refer to AD-Series Retrofit Template Overlay guide at www.schlage.com/support for more information.
	Available Finishes: 626 Satin Chrome Standard. Please consult Customer Care for 605 Bright Brass or 643E Aged Bronze.
Shim Plates
23458607	Interior Shim Plate - (for AD-200/250/300)	See page 226
23458565	Interior Shim Plate - (for AD-400)	See page 226
23458599	Exterior Shim Plate	See page 226
Note: Device is 0.063" thick
Wood Mounts
44-169	AD-Series Cylindrical Mount AD-Series Mortise Mount	See page 167
23740251 23740269	AD-Series & CO Series Exit Trim Mount	See page 167 See page 167
Installation Tools
40-286	Universal Clamp	See page 167
40-288	AD Series cylindrical lock installation template	See page 167
40-292	Universal cylindrical door position switch (DPS) installation template	See page 167
40-287	AD Series mortise lock installation template	See page 167
40-291	Universal mortise door position switch (DPS) installation template	See page 167
IRDORCOR	3/8" Door Coring Fixture (Cores 3/8" bore in door from hinge side to lock)	See page 167

Note: The universal clamp above is necessary when using the remaining products to ensure hole placement accuracy.

The "Universal" (Clamp & DPS) products are for use in all CO, AD and LE product installations.

Product ID	Product Description	Product Specification	Price
Panel Interface Board	AD-300/302 Hardwired Accessories
PIB300-2D*	Panel Interface Board (supports 2 doors)	Supports up to two AD-300 Locks. Wiegand or Clock & Data output. Includes Weatherproof Enclosure (7.1" x 7.1"), RS485 input. Requires 12 or 24 VDC Power Supply.	$514.00
RLBD	Relay Board (for PIB300-2D or PIM400-TD2)	Optionally used with PIM300-2D or PIM400-TD2 to simplify installation with Access Control Panels that require relays. Configurable for Normally Open or Normally Closed.	$261.00
Miscellaneous
798-12	Armored Door Cord	12" x 1/2"	$78.90
798-18	Armored Door Cord	18" x 1/2"	$100.00
Panel Interface Module	AD-400/402 Wireless Accessories
PIM400-TD2*	Panel Interface Module (supports 2 doors)	Wiegand or Clock & Data output. Includes Weatherproof Enclosure (7.1" x 7.1"), Internal Antenna with ability to add Remote Antenna. Requires 12 or 24 VDC power supply. Relay Board sold separately.	$905.00
RLBD	Relay Board (for PIB300-2D or PIM400-TD2)	Optionally used with PIM300-2D or PIM400-TD2 to simplify installation with Access Control Panels that require relays. Configurable for Normally Open or Normally Closed.	$261.00
	Wireless Portable Readers
WPR400-DT	Wireless Portable Signal Tester (with Dummy Trim Reader Cover)	Handheld, battery-operated signal tester with non functioning Dummy Trim Reader Cover.	$1,385.00
WPR400-KP	Wireless Portable Reader (with Keypad Only Reader Module)	Handheld, battery-operated unit with Keypad Only Reader Module.	$1,908.00
WPR400-MG	Wireless Portable Reader (with Magnetic Stripe (Insert) Reader Module)	Handheld, battery-operated unit with Magnetic Stripe (Insert) Reader Module.	$2,021.00
WPR400-MGK	Wireless Portable Reader (with Magnetic Stripe (Insert) with Keypad Reader Module)	Handheld, battery-operated unit with Magnetic Stripe (Insert) with Keypad Reader Module.	$2,096.00
WPR400-MS	Wireless Portable Reader (with Magnetic Stripe (Swipe) Reader Module)	Handheld, battery-operated unit with Magnetic Stripe (Swipe) Reader Module.	$2,012.00
WPR400-MSK	Wireless Portable Reader (with Magnetic Stripe (Swipe) with Keypad Reader Module)	Handheld, battery-operated unit with Magnetic Stripe (Swipe) with Keypad Reader Module.	$2,080.00
WPR400-MT	Wireless Portable Reader (with Multi-Technology Reader Module)	Handheld, battery-operated unit with Multi-Technology Reader Module.	$2,114.00
WPR400-MTK	Wireless Portable Reader (with Multi-Technology with Keypad Reader Module)	Handheld, battery-operated unit with Multi-Technology with Keypad Reader Module.	$2,181.00
WPR400-SI	Wireless Portable Reader (with Smart-Technology iClass Reader Module)	Handheld, battery operated unit with Smart-Technology iClass Compatible Reader Module.	$2,151.00
WPR400-SIK	Wireless Portable Reader (with Smart-Technology iClass Keypad Reader Module)	Handheld, battery operated unit with Smart-Technology iClass Compatible with Keypad Reader Module.	$2,215.00
WPR402-FMK	Wireless Portable Reader (with FIPS Multi-Technology with Keypad Reader Module)	Handheld, battery-operated unit with FIPS Multi-Technology with Keypad Reader Module.	$2,394.00
24885600	WPR400/TK400 Battery Conversion Kit (includes 8AA Batteries, 8AA Battery Holder with appropriate mounting hardware pre-mounted in a new base)	Converts from the Proprietary battery pack to 8 Off-the-Shelf AA batteries	$103.00

Note: Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control provider for details.

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

^* For BAA compliant PIB300-2D or PIM400-TD2 add $25.00. Use suffix BAA.

Product ID	Product Description	Product Specification	Price
	AD-400 Wireless Accessories (continued)
Control Kits
ECK400	Elevator Control Kit	Includes WRI400, PIM400-TD2, ANT400-REM-I/O, 12 VDC Power Supply.	$3,010.00
GCK400	Gate Control Kit	Includes WRI400, PIM400-TD2, ANT400-REM-I/O, MGB+MCA5, 12 VDC Power Supply.	$3,145.00
	Wireless Reader Interface - (Outdoor)
WRI400	Outdoor Wireless Reader Interface	Compatible with Wiegand or Clock & Data. Includes Weatherproof Enclosure, inputs for two parallel readers. Requires 12 or 24 VDC power supply.	$1,066.00
Wireless Test Kit
TK400	Wireless Test Kit	Pre-Installed Test Kit; Complete with WPR400-DT, PIM400-TD2, 593PI Power Supply, Charger, Carrying Case.	$1,772.00
Wireless Repeater Kit
REPTR400	Wireless Repeater Kit	Complete with PIM400-TD2 and WRI400.	$1,970.00
Remote Antennas
ANT400-REM-I/O	Omni-Directional Remote Indoor/ Outdoor Antenna Module	Includes Antenna, 15' Coax, Coax Whip, Articulated Wall/Post Mounting Hardware. For indoor use with PIM400 and/or WRI400. Requires MGB+MCA5 Antenna Grounding Kit for outdoor applications.	$581.00
ANT400-REM-I/O+6DB	Directional Remote Indoor/Outdoor Antenna Module with 6dB Gain	Includes Antenna, 15' Coax, Coax Whip, Articulated Wall/Post Mounting Hardware. For indoor use with PIM400 and/or WRI400. Requires MGB+MCA5 Antenna Grounding Kit for outdoor applications.	$561.00
ANT400-REM-CEILING	Omni-Directional Remote Indoor/ Outdoor Antenna Module	Includes Antenna, 15' Coax, Coax Whip. For indoor use with PIM400 and/ or WRI400.	$427.00
ANT400-REM-HALL	Bi-Directional Remote Indoor Antenna Module	Includes Antenna, 15' Coax, Coax Whip. For indoor use with PIM400 and/ or WRI400.	$609.00
Antenna Grounding Kit
MGB+MCA5	Antenna Grounding Kit (for outdoor mounting)	May be used with ANT400-REM-I/O, ANT400-REM-I/O+6DB, ANT400-REM-CEILING, ANT400-REM-HALL.	$201.00
Power Supply
593PI-12DC	120 VAC to 12 VDC Power Supply	Used to power PIM-TD2, PIM-TD4, PIM-EXP, WRI-OTD-12 VDC, and WRI IN-12 VDC as well as PIM400 and WRI400.	$125.00

Note: Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control provider for details.

AD-SERIES STANDALONE - TABLE OF CONTENTS
HOW TO ORDER	132
AD-SERIES STANDALONE LOCKS & DEVICES OVERVIEW	133
AD-200 STANDALONE HARDWIRED Cylindrical Mortise/Mortise Deadbolt Exit Trim	144 144 146 148
AD-201 STANDALONE HARDWIRED (FIPS COMPLIANT); RIGHTS ON LOCK Cylindrical Mortise/Mortise Deadbolt Exit Trim	150 150 152 154
AD-250 STANDALONE, RIGHT ON CARD Cylindrical Mortise/Mortise Deadbolt Exit Trim	156 156 158 160
AD-SERIES 993 NON-FUNCTIONING "DUMMY" TRIM	162
CT5000 OFFLINE CONTROLLERS	164
AD SERIES STANDALONE ACCESSORIES	166

CONTACT INFORMATION FOR AD-SERIES STANDALONE LOCKS & DEVICES

Payment Address: Schlage Electronic Security 15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service:	Technical Support:
Order Status, Credit Returns of Non-Defective	Technical Questions/Issues, Returns of
Products, General Sales Questions	Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:
Order_Entry_Schlage_Commercial@allegion.com	Electronic_Lock_TechProdSupport@allegion.com

For AD-Series Standalone Locks & Devices Warranty Information please see pages 10-13.

AD-Series Standalone • How to Order

1. Series 2. Class 200 Rights on Lock 201 FIPS Compliant 250 Rights on Magnetic Card 3. Chassis: CY Cylindrical MS Mortise MD Mortise Deadbolt 993R Exit Trim – Rim/CVR/CVC 993S Exit Trim – SVR 993M Exit Trim – Mortise 993DT "Dummy" Exit Trim 4. Function: 70 Classroom/Storeroom 50 Office 40 Privacy 60 Apartment 5. Reader: KP Keypad MGK Magnetic Stripe + Keypad (Insert) MG Magnetic Stripe (Insert) MSK Magnetic Stripe + Keypad (Swipe) MS Magnetic Stripe (Swipe) MTK Multi-Technology + Keypad MT Multi-Technology FMK FIPS 201-2 Compliant Multi-Technology + Keypad 6. Lever: r SPA Sparta ATH Athens RHO Rhodes TLR Tubular ^r To add tactile warning, use prefix 8. Example 8SPA 7. Finish: 626 Satin Chrome 605 Bright Brass 606 Satin Brass 612 Satin Bronze 619 Satin Nickel 625 Bright Chrome 643e Aged Bronze 626AM Satin Chrome (Antimicrobial Coating) 8. Cylinder Type: PD Schlage 6-pin Full Cylinder For options see individual Class/Chassis page 9. Keyway Type: S123 Everest 29 For options see individual Class/Chassis page 10. Handing: RH Right Handed LH Left Handed RHR Right Handed Reverse LHR Left Handed Reverse 11. Battery Holder: 4B - 4AA Battery Kit 8B - 8AA Battery Kit 12. Backset and Latch or Armor Front: 13-247 2-3/4" Backset, Deadlatch, Square Corner, 1-1/8" x 2-1/4" (Standard on CY Chassis) 09-663 Armor Front, 1-1/4" Wide, Square Corner (Standard on MS Chassis) For options see individual Class/Chassis page 13. Strike: 10-025 1-3/16" Lip, ANSI, no box, 1-1/4" x 4-7/8" (Standard on CY Chassis) 10-072 1-3/16" Lip, 1-1/4" x 4-7/8" square corner, box (Standard on MS Chassis) For options see individual Class/Chassis page 14. Door Thickness: 1-3/4" (Standard) For options see individual Class/Chassis page How to Order: AD – 200 – CY – 70 – MG – SPA – 626 – PD – S123 – RH – 4B – 13-247 – 10-025 – 1-3/4 – BAA REQUIRED FIELDS FACTORY DEFAULT AND OPTIONS

15. Additional Options

AD-Series Standalone Locks

With the AD-Series, one platform translates to an endless number of adaptable solutions. You can choose the features and functions that are right for the application today, and upgrade to meet your evolving needs in the future.

Class

AD-200	Standalone, User Rights on the Lock. Computer or Manually Programmable. Keypad, Multi-technology or Magnetic Stripe reader options available.
AD-201	FIPS 201-2 Compliant Standalone, User Rights on the Lock. Computer Programmable with FIPS 201-2 Compliant multi-technology reader.
AD-250	Standalone, user rights on magnetic stripe card. Computer programmable. Magnetic stripe or magnetic stripe + keypad reader options available

Note: 1. AD-Series locks are upgradable from standalone to networked by applying a communication module available in the accessories section and new firmware available on www.schlage.com/support.

Chassis

CY: Cylindrical	Bored lock installed into a round hole in door
MS: Mortise	Lock case installed into a mortise rectangular "pocket" in the door
MD: Mortise Deadbolt	Mortise lock with built-in interconnected auxilary deadbolt
993R: Exit Trim	Rim/Concealed Vertical Rod* (CVR) & Concealed Vertical Cable* (CVC) *Metal door only
993M: Exit Trim	Mortise
993S: Exit Trim	Surface Vertical Rod (SVR)
993DT: Exit Trim	Non-Functioning "Dummy" Exit Trim

Note: 2. Exit trim utilizes universal hardware to simplify installation to a variety of exit device. AD-Series networked locks require a request to exit switch, please see compatibility below.

Exit Device Compatibility

Exit trim utilizes universal hardware to simplify installation to a variety of exit devices.

Exit Device Compatibility		Rim	SVR	CVR/CVC	Mortise
Von Duprin	98/99 and 98/99XP	l	l	l*	l
Von Duprin	22/22F	l	l
Falcon	25	l
Corbin Russwin®	5000	l
Precision™	21 (2100 converts to 21 with Precision's BP21 kit)	l
Yale®	7000	l
Dorma®	9300	l
Sargent®	80	l†

l AD-200 and 250 Offline locks only. * Metal door only. † Narrow design and reversible rim exits not compatible

AD-Series Standalone

Function AD-200/201 AD-250 70: Classroom/ Storeroom Lockset is normally secure. Inside lever always allows free egress. Valid toggle credentials on the exterior may be used to change to a passage or secured status. 50: Office Lockset is normally secure. Inside lever always allows free egress. Interior pushbutton on inside housing may be used to select a passage or secured status. Meets need for lockdown function for safety and security. NOTE: Valid toggle credentials on the exterior may also be used to change status. Has interior pushbutton (IPB). 40: Privacy Lockset is normally secure. Inside lever always allows free egress. Interior pushbutton on inside housing may be used to select a privacy status. The interior pushbutton will disable normal electronic access from the exterior. Opening the door or pressing the interior pushbutton a second time on the inside housing deactivates the privacy status. Has interior pushbutton (IPB). 60: Apartment Lockset is normally secure. Inside lever always allows free egress. Interiorpushbutton on inside housing may be used to select a passage or secured status. Opening the door or pressing the interior pushbutton causes the lockset to toggle unsecured. While toggled unsecured, the lockset can only be secured while the door is closed by pressing the interior pushbutton or using a normal credential on the exterior. Normal electronic access from the exterior is always allowed. Has interior pushbutton. Privacy button No button No button Privacy button

Reader

Reader
KP: Keypad	12 button design
MGK: Magnetic Stripe + Keypad (Insert)
MG: Magnetic Stripe (Insert)	Configurable to read the complete Track 1, 2 or 3.
MSK: Magnetic Stripe + Keypad (Swipe)	Available with and without 12 button keypad.
MS: Magnetic Stripe (Swipe)
MTK: Multi Technology + Keypad
FMK: FIPS Compliant Multi Technology + Keypad	Single solution that reads 125 kHz proximity and 13.56 MHz smart credentials.
MT: Multi Technology	Available with and without 12-button keypad

• Notes: 4. Please refer to AD-Series data sheets and solution sheets prior to ordering to verify credential compatibility.
  • 5. FMK reader now sold separately for field upgrades.
  • 6. Must specify finish when ordering reader separately. KP, MGK, MG, MSK & MS readers available in 626, 605, 606, 612, 619, 625 & 643e. MT, MTK & FMK readers are available in Grey (for 619, 626, 626AM & 625) and available in Brown (for 605, 606, 612 & 643e).

AD-Series Standalone

Lever

RHO	Rhodes	5¹⁄₈" 3⁷⁄₁₆"
SPA	Sparta	5¹⁄₂" 3⁷⁄₁₆"
TLR	Tubular	5¹⁄₂" 3⁷⁄₁₆"
ATH	Athens	5¹⁄₈" 3⁷⁄₁₆"
BRW	Broadway	3.9" 2.7"
BRK	Boardwalk	5.0" 2.4"
LAT	Latitude	4.0" 2.8"
LON	Longitude	4.8" 2.4"

• Notes: 7. All lever designs are available in finishes 605, 606, 612, 619, 625, 626, 643E and 626AM.
  • 8. SPA, TLR & ATH Meet California Fire Code for 1/2" or less return to the door.
  • 9. Changing Lever Cylinder Compatibility on a device typically requires replacement of existing spring cage and tailpiece
  • 10. To order tactile warning levers use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.
  • 11. AD Series, CO Series and ND Series levers may be interchangeable in some cases depending whether it is an interior or exterior lever, the type of chassis and the type of cylinder/ spring cage/ tail piece. Please consult the AD Series Parts guide for more information.

Finish

626	Satin Chrome	BHMA # 626E, Government # US26D
605	Bright Brass	BHMA # 605E, Government # US3
606	Satin Brass	BHMA # 606E, Government # US4
612	Satin Bronze	BHMA # 612E, Government # US10
619	Satin Nickel
625	Bright Chrome	BHMA # 625E, Government # US26
643e	Aged Bronze
626AM	Satin Chrome Antimicrobial

Note: 12. Please refer to the Electronic Access Control catalog or online product information at us.allegion.com to view each finish.

Cylinder

P	With cylinder Schlage- Everest 29 S123 6 Pin Key-in-Lever (KIL) Keyed different as standard with two keys
L	Less cylinder Schlage, Falcon 6 Pin Key-in-Lever (KIL)
R	With cylinder Schlage- Everest 29 S123 6 Pin Full Size Interchangeable Core (FSIC) Keyway one bitted as standard with two keys
J	Less cylinder Schlage 6 Pin Full Size Interchangeable Core (FSIC)
G	With cylinder Schlage Everest 29 R 7 Pin Small Format Interchangeable Core (SFIC) Factory master keyed with two keys as standard, master keying must be specified
B	Less cylinder Schlage, Falcon, Competitive OEM's 7 Pin Small Format Interchangeable Core (SFIC)	*Less Core
L SAR	Less cylinder Sargent (10L+11L) 6 Pin Key-in-Lever (KIL)
L CO6	Less cylinder 6 Pin Key-in-Lever (KIL)	*Less Core
JDSAR	Less cylinder Sargent 6300 6 Pin Full Size Interchangeable Core (FSIC)
J CO6	Less cylinder Corbin 8000 6 Pin Full Size Interchangeable Core (FSIC)
J CO7	Less cylinder Corbin 8000-7 7 Pin Full Size Interchangeable Core (FSIC) (Only RHO, 8RO, SPA, 8SP, TLR, 8TR)
J MED	Less cylinder Medeco 32*0201 6 Pin Full Size Interchangeable Core (FSIC)
J YA6	Less cylinder Yale 1210 or Medeco 31*0100 6 Pin Full Size Interchangeable Core (FSIC)
J YA7	Less cylinder Yale 1220 7 Pin Full Size Interchangeable Core (FSIC)	*Less Core
L FA7	Less cylinder Falcon 7 Pin Key-in-Lever (KIL) (Only RHO, 8RO, SPA, 8SP lever styles)	*Less Core

Notes: 13. Competitor lever designs come in finishes 626 standard, and 605, 606, 612, 619, 625, 643e, and 626AM with extended lead-times.

• 14. For P, R and G -Master Keyed cylinders can be specified and will be shipped in lock packaging.
• 15. For Master Key System Summary form which should accompany the master keyed order, see pages 293-303.
• 16. For Master Keying, additional line item 50-210 is required for Classic and Everest cylinders.
• 17. Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
• 18. For additional assistance on Master Keying as well as restricted keyways please contact your local sales representative.
• 19. Spring cages & tail pieces are different based on the type of cylinder and chassis selected. Please see the AD-Series parts guide for more information.
• 20. The AD-Series accepts many popular models of standard, SFIC, and FSIC cylinders. Consult the Keyway/Cylinder compatibility datasheet (010432) for details. See pricebook for specific configurations.

AD-Series Standalone

Key Systems Available Through Schlage

Everest 29 S Keyway Family	Patent protected open keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats. Patent protection through 2029.
Everest 29 T Keyway Family	Patent protected restricted keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats. Patent protection through 2029.
Everest D Keyway Family	Restricted keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats.
Everest C Keyway Family	Open keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats. R
Schlage Classic Open Keyways	Classic (C/E/F): Open keyways available in key in lever and full size interchangeable core designs
Everest B Keyway Family	Restricted keyways that are available on small format interchangeable core (SFIC).
Everest 29 R Keyway Family	Patent protected restricted keyways that are available on small format interchangeable core (SFIC). Patent protection through 2029.

Notes: 21. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order.

• 22. See sample Letter of Authorization page 305.
• 23. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line..
• 24. Contact your local RSO representative for assistance in determining which format and level of exclusivity best suits your needs.

Handing

RH	Right Handed: Hinges on Right Opens Inward
LH	Left Handed: Hinges on left Opens Inward
RHR	Right Handed Reverse: Hinges on Right Opens Outward
LHR	Left Handed Revers: Hinges on Left Opens Outward

Notes: 25. Exit trim 993 chassis available only with RHR or LHR option.

26. Handing is field reversible, but requires removal of the exterior escutcheon cover. Please see AD- Series installation instructions for details.

Battery

Notes: 27. AD-Series locks use standard off the shelf AA batteries.

Backset & Latchbolt (Cylindrical Chassis)

13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"
43-001	5" Backset extension link, Deadlatch
39-030	Rabbeted latch and strike kit, 605 and 626 only. Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.	no image available

AD-Series Standalone

Mortise Lock Armor Front (Mortise/Mortise Deadbolt Chassis)

09-663	1-1/4" Wide Square Corner, Latch for MS
09-669	1-1/16" Wide Square Corner, Latch, options for MS	1-1/4" Wide	1-1/16" Wide
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	1-1/4" Wide	1-1/16" Wide

Notes: 28. For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE), use 1-1/4" wide armor front. 29. Available finishes are 605, 606, 612, 619, 625, and 626.

30. Images not shown to scale. Consult AD-Series Parts Guide for more information.

Strike Plate (Cylindrical Chassis)

Strike Plate (Cylindrical Chassis)
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8",
10-013	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4", 1-1/2" Lip available, must specify 1-1/2" Lip
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch
K510-066	Box for ANSI strike (Must be specific)
10-072	1-3/16" Lip, 1-1/4" x 4-7/8", Square Corner, box
10-072	7/8", 1", 1-1/2", 1-3/4", or 2" Lip, 1-1/4" x 4-7/8", Square Corner, box
10-075	1/2" Rabbeted, For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front.
37-015	Strike Frame Reinforcer, specify 37-015
XL11-820	One hole for latching functions, RH & LHR doors Lip 1-3/16"
XL11-821	One hole for latching functions, LH & RHR doors Lip 1-3/16"
XQ07-351-134	Strike, ANSI, No Box, 1-1/4" x 4-7/8", 1-3/4" Lip Length	Image not available
XQ03-494-134	Strike, Square Corner, T-strike, Box, 1-1/8" x 2-3/4", 1-3/4" Lip	Image not available

Note: 33. XL11-820 & XL11-821 Extended lead time; contact customer service.

AD-Series Standalone

Door Thickness

1-3/4"	1-3/4"
1-3/8"	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)

Notes: 32. Door Thickness Kits are available on page 226 to install a lock on a door that is thicker or thinner than 1-3/4". See AD-Series Parts guide for details. Locks cannot be installed on doors thicker than 2-3/4" or thinner than 1-3/8".

• 33. Thin Door Shims are available on page 226 to install a lock on a door that is thinner than 1-3/4".
• 34. Decorative Plates are used to cover exposed holes when retrofitting from existing locks to AD-Series locks. The size of plate required will vary based on the size and location of holes being covered. Retrofit information can be found at www.schlage.com/support.
• 35. If under the lock decorative plates are on both sides of device, then door will become 1/8" thicker. A Door Thickness Kit of an incremental 1/8" must be ordered to accommodate under the lock plates.

AD-Series Standalone Locks - Ordering Guide

Customer Name:
Customer Address:
Ship To:
Account #:
Quote #:
PO # & Date:
Price book #:
Shipping Instructions:
Requested Ship Date:
Order Written By:
For Further Information Contact (Name, Phone, Fax)

	Quantity	Series 1.	Class 2.	Chassis1 3.	Function2 4.	Reader3 5.	Lever 6.	Finish 7.	Cylinder 8.	Keyway 9.	Handing 10.	Battery4 11.	Backset & Latch5 or Armor Front6 12.	Strike7 13.	Door Thickness8 14.	Options 15.
Ex.	1	AD	200	CY	70	KP	SPA	626	PD	S123	RH	4B	13-247	10-025	1-3/4	BAA

Please complete all information above and email order to:

Order_Entry_Schlage_Commercial@allegion.com

¹ If Exit trim is chosen, no selections are required for options #12 & #13

² Function: 70 classroom storeroom is standard if no selection is made

³ Reader: KP keypad is standard if no selection is made

⁴ Battery: 4B standard if no selection is made

⁵ Backset & Latch: 13-247 standard for cylindrical if no selection is made

⁶ Armor Front: 09-663 standard for mortise if no selection is made, 09-666 standard for mortise deadbolt if no selection is made

⁷ Strike Plate: 10-025 standard for cylindrical if no selection is made, 10-072 standard for mortise/mortise deadbolt if no selection is made

⁸ Door Thickness: 1-3/4" standard if no selection is made

AD-200 Rights on Lock - Cylindrical

1-4. Select Chassis/Function

AD-200-CY-70*	Classroom/Storeroom	$1,902.00
AD-200-CY-50*	Office	$1,912.00
AD-200-CY-40	Privacy	$1,912.00
AD-200-CY-60	Apartment	$1,912.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

AD-200-CY-70-KP

5. Select Reader Note: Reflects list price adder to base keypad reader price of $553.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $553.00
KP	Keypad	STANDARD
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
MG	Magnetic Stripe (Insert)	$119.00
MGK	Magnetic Stripe (Insert) + Keypad	$190.00
MT	Multi-Technology | Proximity and Smart Card	$205.00
MTK	Multi-Technology + Keypad | Proximity and Smart Card	$272.00

6. Select Lever*

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

MG

MGK

MS

MT/SI

MTK/SIK/FMK

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. Select Backset & Latchbolt

LLL	Less Latch	DEDUCT $35.20
13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
43-001	5" Backset extension link, Deadlatch	$34.10
39-030*	Rabbeted latch and strike kit, 605 and 626 only	$59.80

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013*	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	$16.20
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.00

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

15. Select Options

BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Accessories available, see page 166-168. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-200 Rights on Lock - Mortise/Mortise Deadbolt

1-3. Select Chassis

AD-200-MS	Mortise	$2,185.00
AD-200-MD	Mortise Deadbolt	$2,221.00

AD-200-MS-70-MG

KP

MGK

MS

MT/SI

4. Select Function Note: Locking function capabilities are determined by users access control system

70*	Classroom/Storeroom (Not available on mortise deadbolt)	STANDARD
50*	Office (Not available on mortise deadbolt)	$10.00
40	Privacy ¢	$10.00
60	Apartment ¢	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

¢ Inside Push Button (IPB) only included with Mortise (MS) chassis. Mortise deadbolt (MD) chassis comes with LED indicator only. $10 charge does not apply to mortise deadbolt (MD) chassis.

5. Select Reader Note: Reflects list price adder to base keypad reader price of $553.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $553.00
KP	Keypad	STANDARD
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
MG	Magnetic Stripe (Insert)	$119.00
MGK	Magnetic Stripe (Insert) + Keypad	$190.00
MT	Multi-Technology | Proximity and Smart Card	$205.00
MTK	Multi-Technology + Keypad | Proximity and Smart Card	$272.00

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.90
Standard Options:	SPA (Sparta), RHO (Rhodes), ATH (Athens), TLR (Tubular), BRW, (Broadway), BRK (Boardwalk), LAT (Latitude), LON (Longitude)	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	DEDUCT $65.00
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	$39.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	DEDUCT $36.00
J	Less Cylinder, Schlage, 6 Pin FSIC	$87.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	N/C
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
JDSAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

AD-200 Rights on Lock - Mortise/Mortise Deadbolt

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD	STANDARD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075 Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

15. Select Options

BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Accessories available, see page 166-168.

Accessories include Decorative Plates, Handheld Device, etc.

Credentials available, see pages 26-31.

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-200 Rights on Lock - Exit Trim

1-3. Select Chassis/Exit Trim Type Note: See page 133 for exit device compatibility

AD-200-993R	Exit Rim/Concealed Vertical Rod (Metal Door)/Concealed Vertical Cable (Metal Door)	$2,266.00
AD-200-993S	Exit Surface Vertical Rod	$2,283.00
AD-200-993M	Exit Mortise Lock	$2,283.00

70*	Classroom/Storeroom	STANDARD
50*	Office r	$10.00
40	Privacy r	$10.00
60	Apartment r	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $19.50

5. Select Reader Note: Reflects list price adder to base keypad reader price of $553.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $553.00
KP	Keypad	N/C
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
MG	Magnetic Stripe (Insert)	$119.00
MGK	Magnetic Stripe (Insert) + Keypad	$190.00
MT	Multi-Technology | Proximity and Smart Card	$205.00
MTK	Multi-Technology + Keypad | Proximity and Smart Card	$272.00

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.20
Standard Options:	SPA (Sparta), RHO (Rhodes), ATH (Athens), TLR (Tubular), BRW, (Broadway), BRK (Boardwalk), LAT (Latitude), LON (Longitude)	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	DEDUCT $65.00
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	$39.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	DEDUCT $36.00
J	Less Cylinder, Schlage, 6 Pin FSIC	$87.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$84.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate. For additional assistance on Master Keying as well as restricted keyways please contact customer service.

AD-200-993-70-MTK

KP

MG

MS

MSK

MT/SI

MTK/SIK/FMK

r Confirm these functions are supported by your access control system provider. RX-LC switch is included when ordered in 40, 50 or 60 function. Please specify if Von Duprin Exit or Falcon Exit is being used.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

Standalone Networked AD-SERIES

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. -13. No Selection Required

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

15. Select Options

BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

AD-Series Exit Trim

The AD993DT Non-Functioning "Dummy" Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99 and 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Surface Vertical Rod, Mortise. Low current Request-to-Exit Switch optional for future network migration or if ordered as a 40, 50 or 60 function.

Von Duprin 22/22F

Rim, Surface Vertical Rod

Falcon 25

Rim Low current Request-to-Exit switch optional for future network migration or included if ordered as a 40, 50 or 60 function.

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 Kit)

Note: AD-Series Non-Functioning "Dummy" Exit Trim now available. Please See page 162-159 for details

Accessories available, see page 166-168. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line..

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-201 Standalone - Cylindrical (FIPS Compliant)

1-4. Select Chassis/Function

Note: Locking function capabilities are determined by users access control system

AD-201-CY-70*	Classroom/Storeroom	$1,902.00
AD-201-CY-50*	Office	$1,912.00
AD-201-CY-40	Privacy	$1,912.00
AD-201-CY-60	Apartment	$1,912.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

AD-201-CY-70-FMK

5. Select Reader

FMK	FIPS Multi-Technology + Keypad | Proximity and Smart Card (PIV & PIV-I Card)	$487.00

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $47.80
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
LCO6	LessCylinder,Corbin,6PinKIL(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C
JSAR	LessCylinder,Sargent6300,6PinFSIC	N/C
JCO6	LessCylinder,Corbin8000,6PinFSIC	N/C
JCO7	LessCylinder,Corbin8000-7,7PinFSIC,(OnlyRHO,8RO,SPA,8SP,TLRand8TR)	N/C
JMED	LessCylinder,Medeco32*0201,6PinFSIC(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C
JYA6	LessCylinder,Yale1210orMedeco31*0100,6PinFSIC	N/C
JYA7	LessCylinder,Yale1220,7PinFSIC(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C
LFA7	LessCylinder,Falcon,7Pin,KIL(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, 20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6

Small Format Interchangeable Core

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

AD-201 Standalone - Cylindrical (FIPS Compliant)

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. Select Backset & Latchbolt

LLL	Less Latch	DEDUCT $35.20
13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
43-001	5" Backset extension link, Deadlatch	$34.10
39-030*	Rabbeted latch and strike kit, 605 and 626 only	$59.80

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013*	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	$16.20
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $7.50

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

Note: The AD-200 lock can be field upgraded to a FIPS compliant solution simply by adding the FMK reader (sold separately) and by using the most current firmware revision.

Standard accessories available, see page 166-168. Standard accessories sold separately include Decorative Plates, Handheld Device, etc.

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-201 Standalone - Mortise/Mortise Deadbolt (FIPS Compliant)

1-3. Select Chassis

AD-201-MS	Mortise	$2,185.00
AD-201-MD	Mortise Deadbolt	$2,221.00

AD-201-MS-70-FMK

4. Select Function

Note: Locking function capabilities are determined by users access control system

70*	Classroom/Storeroom (Not available on mortise deadbolt)	STANDARD
50*	Office (Not available on mortise deadbolt)	$10.00
40	Privacy	$10.00
60	Apartment	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

5. Select Reader

FMK	FIPS Multi-Technology + Keypad | Proximity and Smart Card (PIV & PIV-I Card)	$487.00

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $56.20
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
LCO6	LessCylinder,Corbin,6PinKIL(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C
JSAR	LessCylinder,Sargent6300,6PinFSIC	N/C
JCO6	LessCylinder,Corbin8000,6PinFSIC	N/C
JCO7	LessCylinder,Corbin8000-7,7PinFSIC,(OnlyRHO,8RO,SPA,8SP,TLRand8TR)	N/C
JMED	LessCylinder,Medeco32*0201,6PinFSIC(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C
JYA6	LessCylinder,Yale1210orMedeco31*0100,6PinFSIC	N/C
JYA7	LessCylinder,Yale1220,7PinFSIC(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C
LFA7	LessCylinder,Falcon,7Pin,KIL(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, page 293.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

AD-201 Standalone - Mortise/Mortise Deadbolt (FIPS Compliant)

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing(Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD	STANDARD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075 Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

Note: The AD-200 lock can be field upgraded to a FIPS compliant solution simply by adding the FMK reader (sold separately) and by using the most current firmware revision.

Standard accessories available, see page 166-168. Standard accessories sold separately include Decorative Plates, Handheld Device, etc.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-201 Standalone - Exit Trim (FIPS Compliant)

1-3. Select Chassis/Exit Trim Type*

AD-201-993R	Exit Rim/† Concealed Vertical Rod/† Concealed Vertical Cable	$2,266.00
AD-201-993S	Exit Surface Vertical Rod	$2,283.00
AD-201-993M	Exit Mortise Lock	$2,283.00

^* See page 133 for exit device compatibility. † Metal door only.

AD-201-993R-70-FMK

4. Select Function Note: Locking function capabilities are determined by users access control system

70*	Classroom/Storeroom	STANDARD
50*	Office r	$10.00
40	Privacy r	$10.00
60	Apartment r	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $19.50

5. Select Reader

	FMK	FIPS Multi-Technology + Keypad | Proximity and Smart Card (PIV & PIV-I Card)	$487.00

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.90
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
LCO6	LessCylinder,Corbin,6PinKIL(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C
JSAR	LessCylinder,Sargent6300,6PinFSIC	N/C
JCO6	LessCylinder,Corbin8000,6PinFSIC	N/C
JCO7	LessCylinder,Corbin8000-7,7PinFSIC,(OnlyRHO,8RO,SPA,8SP,TLRand8TR)	N/C
JMED	LessCylinder,Medeco32*0201,6PinFSIC(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C
JYA6	LessCylinder,Yale1210orMedeco31*0100,6PinFSIC	N/C
JYA7	LessCylinder,Yale1220,7PinFSIC(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C
LFA7	LessCylinder,Falcon,7Pin,KIL(OnlyRHO,8RO,SPA,8SPleverstyles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. -13. No Selection Required

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

AD-Series Exit Trim

The AD993DT Non-Functioning "Dummy" Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99 and 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Surface Vertical Rod, Mortise. Low current Request-to-Exit Switch optional for future network migration.

Von Duprin 22/22F

Rim, Surface Vertical Rod

Falcon 25 - Rim

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 Kit)

Note: AD-Series Non-Functioning "Dummy" Exit Trim now available. Please see pages 162-163 for details

Standard accessories available, see page 166-168.

Standard accessories sold separately include Decorative Plates, Handheld Device, etc.

Note: The AD-200 lock can be field upgraded to a FIPS compliant solution simply by adding the FMK reader (sold separately) and by using the most current firmware revision.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-250 Rights on Card - Cylindrical

1-4. Select Chassis/Function

Note: Locking function capabilities are determined by users access control system

AD-250-CY-70*	Classroom/Storeroom	$2,074.00
AD-250-CY-50*	Office	$2,084.00
AD-250-CY-40	Privacy	$2,084.00
AD-250-CY-60	Apartment	$2,084.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

AD-250-CY-70-MG

MGK

MS

5. Select Reader Note: Reflects list price adder to base magnetic swipe reader price of $656.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $676.00
MS	Magnetic Stripe (Swipe)	N/C
MSK	Magnetic Stripe (Swipe) + Keypad	$70.10
MG	Magnetic Stripe (Insert)	$17.80
MGK	Magnetic Stripe (Insert) + Keypad	$88.30

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $47.80
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. Select Backset & Latchbolt

LLL	Less Latch	DEDUCT $35.20
13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
43-001	5" Backset extension link, Deadlatch	$34.10
39-030*	Rabbeted latch and strike kit, 605 and 626 only	$59.40

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013*	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	$16.20
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.00

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

15. Select Options

BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Accessories available, see page 166-168. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-250 Rights on Card - Mortise/Mortise Deadbolt

1-3. Select Chassis

AD-250-MS	Mortise	$2,389.00
AD-250-MD	Mortise Deadbolt	$2,426.00

MG

MS

MSK

4. Select Function Note: Locking function capabilities are determined by users access control system

70*	Classroom/Storeroom (Not available on mortise deadbolt)	STANDARD
50*	Office (Not available on mortise deadbolt)	$10.00
40	Privacy ¢	$10.00
60	Apartment ¢	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $20.10

¢ Inside Push Button (IPB) only included with Mortise (MS) chassis. Mortise deadbolt (MD) chassis comes with LED indicator only. $10 charge does not apply to mortise deadbolt (MD) chassis.

5. Select Reader Note: Reflects list price adder to base magnetic swipe reader price of $656.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $676.00
MS	Magnetic Stripe (Swipe)	N/C
MSK	Magnetic Stripe (Swipe) + Keypad	$70.10
MG	Magnetic Stripe (Insert)	$17.80
MGK	Magnetic Stripe (Insert) + Keypad	$88.30

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.90
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD	STANDARD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075 Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

15. Select Options

BAA	BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Accessories available, see page 166-168. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-250 Rights on Lock - Exit Trim

1-3. Select Exit Trim Type*

AD-250-993R	Exit Rim/† Concealed Vertical Rod/† Concealed Vertical Cable	$2,449.00
AD-250-993S	Exit Surface Vertical Rod	$2,466.00
AD-250-993M	Exit Mortise Lock	$2,466.00

^* See page 133 for exit device compatibility. † Metal door only.

AD-250-993-70-MGK

MG

MS

4. Select Function Note: Locking function capabilities are determined by users access control system

70*	Classroom/Storeroom	STANDARD
50*	Office r	$10.00
40	Privacy r	$10.00
60	Apartment r	$10.00

^* Less Door Position Switch, use suffix LDP. Deduct $19.50

5. Select Reader Note: Reflects list price adder to base magnetic swipe reader price of $656.00.

LLL	Less Reader (For reader module accessories sold separately, See page 166)	DEDUCT $676.00
MS	Magnetic Stripe (Swipe)	N/C
MSK	Magnetic Stripe (Swipe) + Keypad	$70.10
MG	Magnetic Stripe (Insert)	$17.80
MGK	Magnetic Stripe (Insert) + Keypad	$88.30

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.90
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $45.60 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

LLL	Less Battery Holder, Batteries, and Cover	DEDUCT $26.70
4B	4AA Battery Kit	STANDARD
8B	8AA Battery Kit	$40.20

12. -13. No Selection Required

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

15. Select Options

BAA BAA Compliant Product	$118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

AD-Series Exit Trim

The AD993DT Non-Functioning "Dummy" Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99 and 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Surface Vertical Rod, Mortise. Low current Request-to-Exit Switch optional for future network migration.

Von Duprin 22/22F

Rim, Surface Vertical Rod

Falcon 25 - Rim

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 Kit)

Note: AD-Series Non-Functioning "Dummy" Exit Trim now available. Please see pages 162-163 for details

Accessories available, see page 166-168. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

AD-993DT – Non-Functioning "Dummy" Trim for Exit

1-4. Select Chassis/ Exit Trim Type* /Reader

AD-993LLL	"Dummy" Trim Less Reader for Exit Rim/† Concealed Vertical Rod/†Concealed Vertical Cable /Surface Vertical Rod/Mortise Lock	$675.00

AD-993DT "Dummy" Trim with "Dummy" Reader Cover for Exit Rim/† Concealed Vertical Rod/Surface Vertical Rod/ Mortise Lock $688.00

^* See page 133 for exit device compatibility. † Metal door only.

AD993DT

5. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.90
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

6. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

7. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

AD-993DT – Non-Functioning "Dummy" Trim for Exit

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core

8. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

• see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.
• 3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

9. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

10. - 12. No Selection Required

13. Select Door Thickness

134	1-3/4"	STANDARD
Example 178	1-7/8" to 2-3/4", (Specify in 1/8" increments)	$60.70

14. Select Options

BAA Compliant Product BAA $118.00

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

AD-Series Exit Trim

The AD993DT Non-Functioning "Dummy" Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99 and 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Surface Vertical Rod, Mortise. Low current Request-to-Exit Switch optional for future network migration.

Von Duprin 22/22F

Rim, Surface Vertical Rod

Falcon 25 - Rim

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 Kit)

Accessories available, see page 166-168. Accessories include Panel Interface Mobile (PIM400) Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

CT5000 Offline Controllers

CT5000

The CT5000 is an indoor, offline single opening controller. It is flexible and works with various card reader technologies. With the correct power supply, the CT5000 controller works with various types of locking hardware, including electric strikes, electro-magnetic locks, or EL exit devices.

If networked functionality is required in the future, the CT5000 can be upgraded to a WRI-400 by upgrading the firmware and adding one incremental piece of hardware. This provides greater adaptability in the field.

Operator CT5000 CT5000 CT5000 Card Reader Pushbutton PS902 Power Supply Electric Strike TPE TPE PS914 Card Reader Card Reader Electric EL Exit Device EL Exit Device Strike Perimeter Door Application The CT5000 can be used for perimeter door applications with an automatic operator, electric strike and card reader Narrow Stile Application For narrow stile applications the CT5000 can be used with an electric strike and card reader Panic Device Application The CT5000 and a card reader along with the Von Duprin 914 Power Supply can control two EL exit devices for double door applications PS902 Power Supply PS902 Power Supply

Note: All hardware shown above including exit devices, electric strikes, auto operators, power supplies, push buttons, etc. are sold separately.

Certifications

• UL 294
• Canada UL
• FCC Part 15
• Canada RSS 210
• RoHS

Features

• Supports up to 5000 users and audits
• Comes standard with 15 foot USB remote cable connector
• Programmed using Schlage Handheld Device (HHD) via USB connection
• Power is hardwired
• Three form C relay outputs (for strike, auxiliary, and alarm)
• Supports Request to exit (remote release) and Door Position Switch input.
• Card functions supported: normal, toggle, freeze, pass through, construction, lock down, and all card plus PIN applications
• Multiple reader technologies and positions on both sides of the gate/ door
• Internal LED visual indicators (Including low battery and state of the relay)
• Compatible with Schlage Express

Credential Compatibility

• Magnetic stripe: field configurable track 1, 2, or 3
• Compatible with Schlage, Xceed ID™, AWID®, HID®, GE/CASI ProxLite®
• 125 kHz Proximity cards: 26a, 34x, 35x, 37x bit formats (reader dependant)
• 13.56 MHz Smart card: 26a,34x, 35x, 37x, 40x, 48x bit format (reader dependant)
• Can read card serial number of Mifare DESfire (reader dependant)

The following readers are UL294 listed for use with the CT5000:

• Essex Electronics model KTP-162
• Mercury Security models MR-5 and MR-20
• XceedID models PR10, MT11, MT15, MTK15, SM10

CT5000	Offline Controller (15 ft. USB cable standard)	$1,082.00
PS-902	2 amp Power Supply (Required)	See page 256
HHD-Kit	Schlage Handheld Programming Device (Required)	See page 166
23745565	125 ft. USB cable for CT5000 (Optional)	$146.00
23703481	23703481 N N SL USB Wall Plate With Panel Mount Cable	$74.40
23787088	23787088 N N SL CT5000 - 5 M USB Extension Cable - A Female To A Male	$47.00

AD-Series Standalone Accessories

Product ID	Product Description	Product Specification	Price
Handheld Device
	HHD KIT-USB Handheld Device Kit	Includes Handheld Device pre-loaded with SUS Application, and HHD-USB Cable. Used to initialize, manage, and test AD and CO Series devices	$1,332.00
HH-USB	USB Replacement Cable	Used to connect Handheld Device to USB locks and accessories.	$60.30
	Handheld Device Accessories (Legacy Product Support)
HH-2PIN SERIAL	Serial Cable	Used to connect current model HHD (BM170) directly to legacy serial products without the need of a CIP	$148.00
HH-SERIAL	Serial Cable*	Used to connect previous model HHD (BM150) with CIP to program serial products.	$133.00
PIMWA-CV	Null Converter	Used to connect Handheld Device to WA Series PIM, using HH-SERIAL Serial Cable.	$26.70

P512112 Computer Interface Module (CIP)* Used to program serial products using HH-SERIAL Serial Cable. $341.00 P101203 CIP with iButton Reader* Used to program serial products using HH-SERIAL Serial Cable. $361.00

(compatible to current and previous model HHDs)

Reader Modules - (Select by Technology) - (Please specify FINISH -Example: KP-626)

KP	Keypad Only Reader Module	$553.00
MG	Magnetic Stripe (Insert) Reader Module - (Track 1, 2, or 3)	$673.00
MGK	Magnetic Stripe (Insert) with Keypad Reader Module - (Track 1, 2, or 3)	$741.00
MS	Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	$657.00
MSK	Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	$726.00
MT	Multi-Technology Reader Module - (125 kHz Proximity and 13.56 MHz Smart)	$758.00
MTK	Multi-Technology with Keypad Reader Module - (125 kHz Proximity and 13.56 MHz Smart)	$826.00
SI	Smart Technology iClass Compatible Reader	$878.00
SIK	Smart Technology iClass Compatible Reader + Keypad	$941.00
FMK	FIPS Multi-Technology with Keypad Reader Module - (125 kHz Proximity and 13.56 MHz Smart)	$1,038.00
DT	Dummy Trim Reader Cover	$30.90

Reader Module Accessories

510310 Magnetic Stripe Cleaning Cards $39.70

Communication Module Kits - (Please specify FINISH - Example: COM200C-626)

COM200C	AD-200/AD-250 Offline Communication Kit (Cover)	Classroom/Storeroom Functions (Cylindrical and Exit Chassis)	$162.00
COM200L	AD-200/AD-250 Offline Communication Kit (Cover with Indicator Lens)	Privacy/Apartment Functions (Mortise Deadbolt Chassis)	$162.00
COM200Pu	AD-200/AD-250 Offline Communication Kit (Cover with Push Button)	Privacy/Apartment/Office Functions (Cylindrical and Mortise Chassis)	$162.00
COM300Lun	AD-300 Hardwired Communication Kit (Cover with Indicator Lens, RS485 Communication PCB)	Classroom/Storeroom Functions (Cylindrical, Mortise and Exit Chassis) Privacy/Apartment Functions (Mortise Deadbolt Chassis)	$358.00
COM300Pun	AD-300 Hardwired Communication Kit (Cover with Push Button, RS485 Communication PCB)	Privacy/Apartment/Office Functions (Cylindrical and Mortise Chassis)	$358.00
COM400Lun	AD-400 Wireless Communication Kit (Cover with Indicator Lens, 900MHz Communication PCB)	Classroom/Storeroom Functions (Cylindrical, Mortise and Exit Chassis) Privacy/Apartment Functions (Mortise Deadbolt Chassis)	$387.00
COM400Pun	AD-400 Wireless Communication Kit (Cover with Push Button, 900MHz Communication PCB)	Privacy/Apartment/Office Functions (Cylindrical and Mortise Chassis)	$387.00

u Must install Door Position Switch #46929121 for proper operation

n Must order and install Pigtail Exit Adapter #23536774 for RX-LC switch if retrofitting AD-200-993 to AD-300-993 or AD-400-993

	Class	Chassis	Type	Classroom/ Storeroom (70)	Office (50)	Apartment (60)	Privacy (40)
	AD-200 & AD-250	CY	Cylindrical	COM200C	COM200P	COM200P	COM200P
OFFLINE	AD-200 & AD-250	MS	Mortise	COM200C	COM200P	CO M200P	COM200P
	AD-200 & AD-250	MD	Mortise Deadbolt	N/A	N/A	COM200L	COM200L
	AD-200 & AD-250	993	Exit Trim	COM200C	N/A	N/A	N/A
	AD-300	CY	Cylindrical	COM300L	COM300P	COM300P	COM300P
	AD-300	MS	Mortise	COM300L	COM300P	COM300P	COM300P
NETWORKED	AD-300	MD	Mortise Deadbolt	N/A	N/A	COM300L	COM300L
	AD-300	993	Exit Trim	COM300L	N/A	N/A	N/A
	AD-400	CY	Cylindrical	COM400L	COM400P	COM400P	COM400P
	AD-400	MS	Mortise	COM400L	COM400P	COM400P	COM400P
	AD-400	MD	Mortise Deadbolt	N/A	N/A	COM400L	COM400L
	AD-400	993	Exit Trim	COM400L	N/A	N/A	N/A

Suffixes: C= Cover L= LED Only P= Pushbutton

Note: Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control provider for details.

^* Not compatible to current HHD (BM170)

AD-Series Standalone Accessories

Product ID	Product Description	Price
Door Position Switch
46929121	Door Position Switch	See page 226
	Battery Cover - (Select by Battery Quantity) - (Please specify FINISH - Example: 4C-626)
4C (46929071)	4AA Battery Cover (with Screw)	See page 227
8C (46929105)	8AA Battery Cover (with Screw)	See page 227
	Battery Holder & Cover Kit - (Select by Battery Quantity) - (Please specify FINISH - Example: 4B-626)
	4B (46929055) 4AA Battery Holder & Cover Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, Battery Strap Screws, 4AA Battery Cover, Cover Screw, Torx Cover Screw)	See page 227
	8B (46929089) 8AA Battery Holder & Cover Kit (Includes 8AA Battery Holder with Cable, 8AA Battery Strap, Battery Strap Screws, 8AA Battery Cover, Cover Screw, Torx Cover Screw, Mylar)	See page 227
	Torx Tamper Screw Pack - (Select by Chassis Type) - (Please specify FINISH - Example: 23538812-626)
Cylindrical
23538812	Torx Tamper Screw Pack	See page 227
Mortise
23538820	Torx Tamper Screw Pack	See page 227
Exit
23538838	Torx Tamper Screw Pack	See page 227
	Decorative Plate - (Select by Size) - (Please specify FINISH - Example: 23760283-626)
23631823	1.5" x 3.25" x .105" Decorative Plate (with Screws) - (Exit Trim)	See page 226
23760267	1.7" x 3.5" x .075" Decorative Plate (with Screws)	See page 226
23760283	3.2" x 3.5" x .075" Decorative Plate (with Screws)	See page 226
23760317	6.0" x 3.5" x .075" Decorative Plate (with Screws)	See page 226
23760325	6.6" x 3.5" x .075" Decorative Plate (with Screws)	See page 226
23760309	8.0" x 3.5" x .075" Decorative Plate (with Screws)	See page 226
23760291	8.0" x 3.5" x .075" Decorative Plate (with Screws and Welded Standoff)	See page 226
23760259*	10.5" x 3.5" x .075" Decorative Plate (no Screws necessary) - (Under Lock)	See page 226
23760275*	12.0" x 3.5" x .075" Decorative Plate (no Screws necessary) - (Under Lock)	See page 226
	*Please consider overall Door Thickness when ordering
	Note: Single Decorative Plate. Interior and Exterior Decorative Plates may be required.
	Note: Decorative Plates may have multiple applications. Please refer to AD-Series Retrofit Template Overlay guide at www.schlage.com/support for more information. Available Finishes: 626 Satin Chrome Standard. Please consult Customer Care for 605 Bright Brass or 643E Aged Bronze.
Shim Plates
23458607	Interior Shim Plate - (for AD-200/250/300)	See page 226
23458565	Interior Shim Plate - (for AD-400) Exterior Shim Plate	See page 226
23458599 Note: Device is 0.063" thick		See page 226
Wood Mounts
44-169	AD-Series Cylindrical Mount	$228.00
23740251	AD-Series Mortise Mount	$255.00
23740269	AD-Series & CO Series Exit Trim Mount	$328.00
Installation Tools
40-286	Universal Clamp (For use with all AD, CO and LE Series installation templates)	$497.00
40-288	AD Series cylindrical lock installation template	$961.00
40-292	Universal cylindrical door position switch (DPS) installation template	$149.00
40-287	AD Series mortise lock installation template	$961.00

40-291 Universal mortise door position switch (DPS) installation template $146.00

Note: These metal lock and DPS templates require use of specially designed universal clamp to ensure drilling accuracy.

AD-Series Standalone Accessories

Product ID	Product Description	Product Specification	Price
	AD-200 Standalone Accessories
	Express Level Software Package
SXPR-SFT-1	Express Offline Lock Software	Recommended for offline locks of fewer than 1000 users and/or 100 access points. Reporting of last 1000 events capability will retrieve audit trails. Must be installed on a computer that meets the minimum requirements (refer to software datasheet)	See page 211
	Note: Refer to Software Levels Datasheet for features and details
	Express Level Software Package Accessories
P512112	Express Computer Interface Module	Used to program legacy CM/CL/KC products, using HH-SERIAL	See page 211

P512112	Express Computer Interface Module	Used to program legacy CM/CL/KC products, using HH-SERIAL Serial Cable	See page 211
P101203	Express Computer Interface Module (with iButton)	Used to connect PC/laptop to access device	See page 211
P394548	Express Female to Female Serial Cable	Used to connect P101203 Computer Interface Module to PC/laptop	See page 211
SDB9USBCBL	Express Male DB9 to USB 6" Cable Adapter	Used to connect a USB Port device to a Serial Port device	See page 211
CRM2	Express Magnetic Stripe Enrollment Reader		See page 211
CRP2	Express Proximity Enrollment Reader		See page 211
MT20	USB/BLE (ENGAGE mobile app) MIFARE/EV1 PIV Enrollment Reader		See page 42

Express Installation & Training
SCH-EXP-INST Express Installation & Training	Includes software installation and training. Provided by Allegion Security &	See page 211
	Safety Consultant remotely from factory. (No discounts apply)

Remote Door Release
	Push Button Release Options	AD-200 firmware enables the use of a wired remote release of the door. Many push button types are available.	See pages 265-270
AD-250 Accessories
CL-ENCODER-2	Campus Lock Magnetic Stripe Encoder	ISO compatible high/low coercivity with female/male serial cable.	$4,703.00

CO-SERIES STANDALONE; MNUALLY PROGRAMMABLE
HOW TO ORDER	170
CO-SERIES OVERVIEW	171
CO-100 STANDALONE; MANUALLY PROGRAMMABLE Cylindrical Mortise Exit Trim	182 182 184 186
CO-200 STANDALONE; COMPUTER OR MANULALLY PROGRAMMABLE WITH USER RIGHTS ON LOCKS Cylindrical Mortise/Mortise Deadbolt Exit Trim	188 188 190 192
CO-220 CLASSROOM LOCKDOWN Cylindrical Mortise Exit Trim	194 194 196 198
CO-993DT - NON FUNCTIONING "DUMMY" TRIM FOR EXIT	200
CO-250 STANDALONE; COMPUTER PROGRAMMABLE WITH USER RIGHTS ON MAGNETIC STRIPE CARD Cylindrical Mortise/Mortise Deadbolt Exit Trim	202 202 204 206
CO-993DT NON-FUNCTIONING "DUMMY" EXIT TRIM	208
CO-SERIES ACCESSORIES HHD and Accessories Deacorative Plates Shim Plates Wood Mounts Installation Tools Express Level Software Package Accessories	210 210 210 210 210 211 211
CT5000-OFFLINE CONTROLLER	212

CONTACT INFORMATION FOR CO-SERIES STANDALONE LOCKS

Payment Address: Schlage Electronic Security

15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service:	Technical Support:
Order Status, Credit Returns of Non-Defective	Technical Questions/Issues, Returns of
Products, General Sales Questions	Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:
Order_Entry_Schlage_Commercial@allegion.com	Electronic_Lock_TechProdSupport@allegion.com

CO-Series • How to Order

How to Order: 1. Series 2. Class: 100 Keypad Programmable 200 Rights on Lock 220 Classroom Lockdown Solution 250 Rights on Magnetic Stripe Credential 3. Chassis: CY Cylindrical MS Mortise MD Mortise Deadbolt 993R Exit Trim – Rim/CVR/CVC 993S Exit Trim – SVR 993M Exit Trim – Mortise 993DT "Dummy" Exit Trim 4. Function: 75 Classroom Security 70 Classroom/Storeroom 50 Office 40 Privacy 5. Reader: KP Keypad MSK Magnetic Stripe + Keypad (Swipe) MS Magnetic Stripe (Swipe) PRK Proximity + Keypad PR Proximity 6. Lever: r SPA Sparta ATH Athens RHO Rhodes TLR Tubular ^r To add tactile warning, use prefix 8. Example 8SPA 7. Finish: 626 Satin Chrome 605 Bright Brass 606 Satin Brass 612 Satin Bronze 619 Satin Nickel 625 Bright Chrome 643e Aged Bronze 626AM Satin Chrome (Antimicrobial Coating) 8. Cylinder Type: PD Schlage 6-pin Full Cylinder For options see individual Class/Chassis page 9. Keyway Type: S123 Everest 29 For options see individual Class/Chassis page 10. Handing: RH Right Handed LH Left Handed RHR Right Handed Reverse LHR Left Handed Reverse 11. Battery Holder: 4B - 4AA Battery Kit 12. Backset and Latch or Armor Front: 13-247 2-3/4" Backset, Deadlatch, Square Corner, 1-1/8" x 2-1/4" (Standard on CY Chassis) 09-663 Armor Front, 1-1/4" Wide, Square Corner (Standard on MS Chassis) For options see individual Class/Chassis page 13. Strike: 10-025 1-3/16" Lip, ANSI, no box, 1-1/4" x 4-7/8" (Standard on CY Chassis) 10-072 1-3/16" Lip, 1-1/4" x 4-7/8" square corner, box (Standard on MS Chassis) For options see individual Class/Chassis page 14. Door Thickness: 1-3/4" (Standard) For options see individual Class/Chassis page CO – 200 – CY – 70 – MS – SPA – 626 – PD – S123 – RH – 4B – 13-247 – 10-025 – 1-3/4 – BAA REQUIRED FIELDS FACTORY DEFAULT AND OPTIONS

15. Additional Options

Series

CO-Series standalone locks are the ideal solution for facilities that ant the convenience and efficiency of electronic access control without the complexity or cost of a networked system.

Class

CO-100	Standalone, keypad only, manually programmable only
CO-200	Standalone, user access rights stored on the lock, manually or computer programmable
CO-220	Standalone, classroom security, remote local lockdown
CO-250	Standalone, user rights stored on magnetic stripe card, computer programmable only

Chassis

CY: Cylindrical	Bored lock installed into a round hole in the door
MS: Mortise	Lock case installed into a mortise rectangular "pocket" in the door
MD: Mortise Deadbolt	Mortise lock with built-in interconnected auxiliary deadbolt
993R: Exit Trim	Rim/Concealed Vertical Rod* (CVR) & Concealed Vertical Cable* (CVC) *Metal door only
993M: Exit Trim	Mortise
993S: Exit Trim	Surface Vertical Rod (SVR)
993DT: Exit Trim	Non-Functioning "Dummy" Exit Trim

Note: 1. Exit trim is only available in 70 function on CO-200, CO-220, and CO-250 models.

^2. Exit trim utilizes universal hardware to simplify installation to a variety of exit device.

CO-Series Standalone

Exit Device Compatibility

Exit trim utilizes universal hardware to simplify installation to a variety of exit devices.

Exit Device Compatibility		Rim	SVR	CVR/CVC	Mortise
Von Duprin	98/99 and 98/99XP	l	l	l*	l
Von Duprin	22/22F	l	l
Falcon	25	l
Corbin Russwin®	5000	l
Precision™	21 (2100 converts to 21 with Precision's BP21 kit)	l
Yale®	7000	l
Dorma®	9300	l
Sargent®	80	l†

^l CO-220 is not compatible with surface vertical rod (SVR) devices. * Metal door only. † Narrow design and reversible rim exits not compatible

Function CO-100 CO-200/CO-250

70: Classroom/ Storeroom	Lockset is normally secure. Inside lever always allows free egress. Valid toggle credentials on the exterior may be used to change to a passage or secured status.	No button	No button
50: Office	Lockset is normally secure. Inside lever always allows free egress. Interior pushbutton on inside housing may be used to select a passage or secured status. Meets need for lockdown function for safety and security. Note: Valid toggle credentials on the exterior may also be used to change status. Has interior pushbutton (IPB).	Privacy button	Privacy button
40: Privacy	Lockset is normally secure. Inside lever always allows free egress. Interior pushbutton on inside housing may be used to select a privacy status. The interior pushbutton will disable normal electronic access from the exterior. Opening the door or pressing the interior pushbutton a second time on the inside housing deactivates the privacy status. Has interior pushbutton (IPB).	Privacy button

CO-220

75: Classroom Security	Operates like a standard classroom/storeroom (70) function. When remote fob is pressed to initiate immediate local lockdown, all normal credentials are rejected and only an authorized pass through credential will allow access. Inside lever always allows free egress.	LED button

Reader

KP: Keypad	12 button design
MSK: Magnetic Stripe + Keypad (Swipe)	Configurable to read the complete Track 1, 2 or 3
MS: Magnetic Stripe (Swipe)
PR: Proximity	Reads 125 kHz proximity credentials
PRK: Proximity + Keypad

Note: 3. Please refer to CO-Series data sheets and solution sheets prior to ordering to verify credential compatibility.

CO-Series Standalone

Lever

RHO	Rhodes	5¹⁄₈" 3⁷⁄₁₆"
SPA	Sparta	5¹⁄₂" 3⁷⁄₁₆"
TLR	Tubular	5¹⁄₂" 3⁷⁄₁₆"
ATH	Athens	5¹⁄₈" 3⁷⁄₁₆"
BRW	Broadway	3.9" 2.7"
BRK	Boardwalk	5.0" 2.4"
LAT	Latitude	4.0" 2.8"
LON	Longitude	4.8" 2.4"

• Notes: 4. All lever designs are available in finishes 605, 606, 612, 619, 625, 626, 643E and 626AM.
  • 5. SPA, TLR & ATH Meet California Fire Code for 1/2" or less return to the door.
  • 6. Changing Lever Cylinder Compatibility on a device typically requires replacement of existing spring cage and tailpiece
  • 7. To order tactile warning levers use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.
  • 8. AD Series, CO Series & ND Series levers may be interchangeable in some cases depending whether it is an interior or exterior lever, the type of chassis and the type of cylinder/ spring cage/ tail piece. Please consult the CO Series Parts guide for more information.

Finish

626	Satin Chrome	BHMA # 626E, Government # US26D
605	Bright Brass	BHMA # 605E, Government # US3
606	Satin Brass	BHMA # 606E, Government # US4
612	Satin Bronze	BHMA # 612E, Government # US10
619	Satin Nickel
625	Bright Chrome	BHMA # 625E, Government # US26
643e	Aged Bronze
626AM	Satin Chrome Antimicrobial

Note: 9. Please refer to the Electronic Access Control catalog or online product information at us.allegion.com to view each finish.

Cylinder

P	With cylinder Schlage- Everest 29 S123 6 Pin Key-in-Lever (KIL) Keyed different as standard with two keys
L	Less cylinder Schlage, Falcon 6 Pin Key-in-Lever (KIL)
R	With cylinder Schlage- Everest 29 S123 6 Pin Full Size Interchangeable Core (FSIC) Keyway one bitted as standard with two keys
J	Less cylinder Schlage 6 Pin Full Size Interchangeable Core (FSIC)
G	With cylinder Schlage Everest 29 R 7 Pin Small Format Interchangeable Core (SFIC) Factory master keyed with two keys as standard, master keying must be specified
B	Less cylinder Schlage, Falcon, Competitive OEM's 7 Pin Small Format Interchangeable Core (SFIC)	*Less Core
L SAR	Less cylinder Sargent (10L+11L) 6 Pin Key-in-Lever (KIL)
L CO6	Less cylinder 6 Pin Key-in-Lever (KIL)	*Less Core
J SAR	Less cylinder Sargent 6300 6 Pin Full Size Interchangeable Core (FSIC)
J CO6	Less cylinder Corbin 8000 6 Pin Full Size Interchangeable Core (FSIC)
J CO7	Less cylinder Corbin 8000-7 7 Pin Full Size Interchangeable Core (FSIC) (Only RHO, 8RO, SPA, 8SP, TLR, 8TR)
J MED	Less cylinder Medeco 32*0201 6 Pin Full Size Interchangeable Core (FSIC)
J YA6	Less cylinder Yale 1210 or Medeco 31*0100 6 Pin Full Size Interchangeable Core (FSIC)
J YA7	Less cylinder Yale 1220 7 Pin Full Size Interchangeable Core (FSIC)	*Less Core
L FA7	Less cylinder Falcon 7 Pin Key-in-Lever (KIL) (Only RHO, 8RO, SPA, 8SP lever styles)	*Less Core

Notes: 14. Competitor lever designs come in finishes 626 standard, and 605, 606, 612, 619, 625, 643e, and 626AM with extended lead-times.

• 15. For P, R and G -Master Keyed cylinders can be specified and will be shipped in lock packaging.
• 16. For Master Key System Summary form which should accompany the master keyed order, see pages 293-303.
• 17. For Master Keying, additional line item 50-210 is required for Classic and Everest cylinders.
• 18. Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
• 19. For additional assistance on Master Keying as well as restricted keyways please contact your local sales representative.
• 20.Spring cages & tail pieces are different based on the type of cylinder and chassis selected. Please see the CO-Series parts guide for more information.
• 21. The CO-Series accepts many popular models of standard, SFIC, and FSIC cylinders. Consult the Keyway/Cylinder compatibility datasheet (010432) for details. See pricebook for specific configurations.

CO-Series Standalone

Key Systems Available Through Schlage

Everest 29 S Keyway Family	Patent protected open keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats. Patent protection through 2029.
Everest 29 T Keyway Family	Patent protected restricted keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats. Patent protection through 2029.
Everest D Keyway Family	Restricted keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats.
Everest C Keyway Family	Open keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats.
Schlage Classic Open Keyways	Classic (C/E/F): Open keyways available in key in lever and full size interchangeable core designs
Everest B Keyway Family	Restricted keyways that are available on small format interchangeable core (SFIC).
Everest 29 R Keyway Family	Patent protected restricted keyways that are available on small format interchangeable core (SFIC). Patent protection through 2029.

Notes: 18. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order.

• 19. See sample Letter of Authorization page 305.
• 20. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line..
• 21. Contact your local RSO representative for assistance in determining which format and level of exclusivity best suits your needs.

Handing

RH	Right Handed: Hinges on Right Opens Inward
LH	Left Handed: Hinges on left Opens Inward
RHR	Right Handed Reverse: Hinges on Right Opens Outward
LHR	Left Handed Reverse: Hinges on Left Opens Outward

Notes: 22. Exit trim 993 chassis available only with RHR or LHR option.

23. Handing is field reversible, but requires removal of the exterior escutcheon cover. Please see CO-Series installation instructions for details.

Battery

Note: 24. CO-Series locks use standard off the shelf AA batteries.

Backset & Latchbolt (Cylindrical Chassis)

13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"
43-001	5" Backset extension link, Deadlatch
39-030	Rabbeted latch and strike kit, 605 and 626 only. Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.	No image available

Mortise Lock Armor Front (Mortise/Mortise Deadbolt Chassis)

09-663	1-1/4" Wide Square Corner, Latch for MS
09-669	1-1/16" Wide Square Corner, Latch, options for MS	1-1/4" Wide	1-1/16" Wide
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	1-1/4" Wide	1-1/16" Wide

Notes: 25. For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE), use 1-1/4" wide armor front 26 Available finishes are 605, 606, 612, 619, 625, and 626.

²⁷ Images not shown to scale. Consult CO-Series Parts Guide for more information.

Strike Plate (Cylindrical Chassis)

10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8",
10-013	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4", 1-1/2" Lip available, must specify 1-1/2" Lip
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch
K510-066	Box for ANSI strike (Must be specific)
10-072	1-3/16" Lip, 1-1/4" x 4-7/8", Square Corner, box
10-072	7/8", 1", 1-1/2", 1-3/4", or 2" Lip, 1-1/4" x 4-7/8", Square Corner, box
10-075	1/2" Rabbeted, For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front.
37-015	Strike Frame Reinforcer, specify 37-015
XL11-820	One hole for latching functions, RH & LHR doors Lip 1-3/16"
XL11-821	One hole for latching functions, LH & RHR doors Lip 1-3/16"
XQ07-351-134	Strike, ANSI, No Box, 1-1/4" x 4-7/8", 1-3/4" Lip Length	Image not available
XQ03-494-134	Strike, Square Corner, T-strike, Box, 1-1/8" x 2-3/4", 1-3/4" Lip	Image not available

Note: 33. XL11-820 & XL11-821 Extended lead time; contact customer service.

CO-Series Standalone

Door Thickness

1-3/4"	1-3/4"
1-3/8"	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)

Notes: 29. Door Thickness Kits are available on page 241 to install a lock on a door that is thicker or thinner than 1-3/4". See AD-Series Parts guide for details. Locks cannot be installed on doors thicker than 2-3/4" or thinner than 1-3/8".

• 30. Thin Door Shims are available on page 210 to install a lock on a door that is thinner than 1-3/4".
• 31. Decorative Plates are used to cover exposed holes when retrofitting from existing locks to CO-Series locks. The size of plate required will vary based on the size and location of holes being covered. Retrofit information can be found at www.schlage.com/support.
• 32. If under the lock decorative plates are on both sides of device, then door will become 1/8" thicker. A Door Thickness Kit of an incremental 1/8" must be ordered to accommodate under the lock plates.

CO-Series Standalone Locks - Ordering Guide

Customer Name:
Customer Address:
Ship To:
Account #:
Quote #:
PO # & Date:
Price book #:
Shipping Instructions:
Requested Ship Date:
Order Written By:
For Further Information Contact (Name, Phone, Fax)

	Quantity	Series 1.	Class 2.	Chassis1 3.	Function2 4.	Reader3 5.	Lever 6.	Finish 7.	Cylinder 8.	Keyway4 9.	Handing 10.	Battery 11.	Backset & Latch5 or Armor Front6 12.	Strike7 13.	Door Thickness8 14.	Options 15.
Ex.	1	CO	200	CY	70	KP	SPA	626	PD	S123	RH	4B	13-247	10-025	1-3/4

Please complete all information above and email order to:

Order_Entry_Schlage_Commercial@allegion.com

¹ If Exit trim is chosen, no selections are required for options #12 & #13

² Function: 70 classroom storeroom is standard if no selection is made

³ Reader: KP keypad is standard if no selection is made

⁴ Only applies to the PD, RD or GD cylinder type

⁵ Backset & Latch: 13-247 standard for cylindrical if no selection is made

⁶ Armor Front: 09-663 standard for mortise if no selection is made, 09-666 standard for mortise deadbolt if no selection is made

⁷ Strike Plate: 10-025 standard for cylindrical if no selection is made, 10-072 standard for mortise/mortise deadbolt if no selection is made

⁸ Door Thickness: 1-3/4" standard if no selection is made

CO-100 Manually Programmable - Cylindrical

1-5. Select Chassis/Function/Reader (Note: CO-Series readers are not interchangeable)

CO-100-CY-70-KP	Classroom/Storeroom with Keypad Reader; manually programmed	$866.00
CO-100-CY-50-KP	Office with Keypad Reader; manually programmed	$876.00
CO-100-CY-40-KP	Privacy with Keypad Reader; manually programmed	$876.00

CO-100-CY-70-KP

6. Select Lever*

LLL	Less each lever	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6

Small Format Interchangeable Core

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

4B	4AA Battery Kit	STANDARD

12. Select Backset & Latchbolt

Less Latch	DEDUCT $35.20
2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
5" Backset extension link, Deadlatch	$34.10
Rabbeted latch and strike kit, 605 and 626 only	$59.80

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013*	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	N/C
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.00

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-100 Manually Programmable - Mortise

1-5. Select Chassis/Function/Reader (Note: CO-Series readers are not interchangeable)

CO-100-MS-70-KP	Classroom/Storeroom with Keypad Reader; manually programmed	$1,031.00
CO-100-MS-50-KP	Office with Keypad Reader; manually programmed	$1,041.00
CO-100-MS-40-KP	Privacy with Keypad Reader; manually programmed	$1,041.00
CO-100-MD-40-KP	Privacy with Mortise Deadbolt with Keypad Reader; manually programmed	$1,137.00

CO-100-MS-70-KP

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.90
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6

Small Format Interchangeable Core

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$58.90

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-100 Rights on Lock - Exit Trim

1-3. Select Chassis/Function/Reader (Note: CO-Series readers are not interchangeable)

		`
	/ II	. 1
١	ľå	L j	1119
	1	_	٠.

CO-100-993R* -70-KP	Exit Rim/† Concealed Vertical Rod/† Concealed Vertical Cable with Keypad Reader, Manually Programmed	$1,195.00
CO-100-993R*-40-KP	Privacy with Keypad Reader; manually programmed	$1,195.00
CO-100-993R-50-KP	Office with Keypad Reader; manually programmed	$1,195.00
CO-100-993S* -70-KP	Exit Surface Vertical Rod with Keypad Reader, Manually Programmed	$1,205.00
CO-100-993M* -70-KP	Exit Mortise Lock with Keypad Reader, Manually Programmed	$1,205.00

^* See page 172 for exit device compatibility. † Metal door only.

CO-100-993R-70-KP

4. Select Function

	5. Select Lever*
LLL	Less interior and exterior levers	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C

LON Longitude N/C

70 Classroom/Storeroom STANDARD

6. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

7. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

8. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

9. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

10. Select Battery

4B 4AA Battery Kit	STANDARD

11. - 12. No Selection Required

13. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

CO-Series Exit Trim

The CO-100 Exit Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99, 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Surface Vertical Rod, Mortise.

Von Duprin 22/22F

Rim, Surface Vertical Rod

Falcon 25 - Rim

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 kit)

Note: CO-Series Non-Functioning "Dummy" Exit Trim now available.

Please see pages 200-201 for details

Accessories available, see pages 210-211.

Accessories include Decorative Plates, Handheld Device, etc.

Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-200 Rights on Lock - Cylindrical

1-4. Select Chassis/Function

CO-200-CY-70	Classroom/Storeroom	$1,117.00
CO-200-CY-50	Office	$1,127.00
CO-200-CY-40	Privacy	$1,127.00

CO-200-CY-70-PRK

CO-200-CY-70-PR

CO-200-CY-70-MSK

CO-200-CY-70-MS

CO-200-CY-70-KP

5. Select Reader (Note: CO-Series readers are not interchangeable)

KP	Keypad	N/C
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
PR	Proximity	$171.00
PRK	Proximity + Keypad	$239.00

6. Select Lever*

LLL	Less each lever	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6

Small Format Interchangeable Core

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

4B	4AA Battery Kit	STANDARD

12. Select Backset & Latchbolt

LLL	Less Latch	DEDUCT $35.20
13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
43-001	5" Backset extension link, Deadlatch	$34.10
39-030*	Rabbeted latch and strike kit, 605 and 626 only	$59.80

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013*	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	N/C
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.00

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-200 Rights on Lock - Mortise/Mortise Deadbolt

1-3. Select Chassis

CO-200-MS	Mortise	$1,315.00
CO-200-MD	Mortise Deadbolt	$1,384.00

CO-200-MS-70-PR

CO-200-MS-70-PRK

CO-200-MS-70-MSK

CO-200-MS-70-MS

CO-200-MS-70-KP

4. Select Function

70	Classroom/Storeroom (Not available on mortise deadbolt)	STANDARD
50	Office (Not available on mortise deadbolt)	$10.00
40	Privacy ¢	$10.00

¢ Inside Push Button (IPB) only included with Mortise (MS) chassis. Mortise deadbolt (MD) chassis comes with LED indicator only. $10 charge does not apply to mortise deadbolt (MD) chassis.

5. Select Reader (Note: CO-Series readers are not interchangeable)

KP	Keypad	STANDARD
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
PR	Proximity	$171.00
PRK	Proximity + Keypad	$239.00

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.90
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.10 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate. For additional assistance on Master Keying as well as restricted keyways please contact customer service.

CO-200 Rights on Lock - Mortise/Mortise Deadbolt

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
Everest 29 S (Key in Lever or FSIC)	STANDARD
Everest C	N/C
Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
Everest 29 T	$18.00
Everest D	$18.00
Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
Everest 29 R	N/C
Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

4B 4AA Battery Kit	STANDARD

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD	STANDARD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075 Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-200 Rights on Lock - Exit Trim

1-3. Select Chassis/Exit Trim Type*

CO-200-993R	Exit Rim/† Concealed Vertical Rod/† Concealed Vertical Cable	$1,479.00
CO-200-993S	Exit Surface Vertical Rod	$1,498.00
CO-200-993M	Exit Mortise Lock	$1,498.00

^* See page 172 for exit device compatibility. †

Metal door only.

CO-200-993R-70-MSK

CO-200-993R-70-MS

CO-200-993R-70-KP

CO-200-993R-70-PR

CO-200-993R-70-PRK

4. Select Function

5. Select Reader (Note: CO-Series readers are not interchangeable)
KP	Keypad	N/C
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
PR	Proximity	$171.00
PRK	Proximity + Keypad	$239.00

70 Classroom/Storeroom STANDARD

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

4B	4AA Battery Kit	STANDARD

12. - 13. No Selection Required

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

CO-Series Exit Trim

The CO-100 Exit Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99, 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Surface Vertical Rod, Mortise.

Von Duprin 22/22F

Rim, Surface Vertical Rod

Falcon 25 - Rim

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 kit)

Note: CO-Series Non-Functioning "Dummy" Exit Trim now available.

Please see pages 208-209 for details

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-220 Classroom Lockdown Solution - Cylindrical

1-4. Select Chassis/Function

CO-220-CY-75 Classroom Security $1,480.00

Note: Price includes (1) pre-paired Remote Lockdown Fob, p/n 24744856, shipped with lock. Additional fobs available under "CO-Series Accessories."

CO-220-CY-75-PRK

CO-220-CY-75-PR

CO-220-CY-75-MSK

CO-220-CY-75-MS

CO-220-CY-75-KP

5. Select Reader (Note: CO-Series readers are not interchangeable)

KP	Keypad	N/C
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
PR	Proximity	$171.00
PRK	Proximity + Keypad	$239.00

6. Select Lever*

LLL	Less each lever	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate. For additional assistance on Master Keying as well as restricted keyways please contact customer service.

CO-220 Classroom Lockdown Solution - Cylindrical

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

4B 4AA Battery Kit	STANDARD

12. Select Backset & Latchbolt

Less Latch	DEDUCT $35.20
2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
5" Backset extension link, Deadlatch	$34.10
Rabbeted latch and strike kit, 605 and 626 only	$59.80

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013*	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	N/C
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.00

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-220 Classroom Lockdown Solution - Mortise

1-4. Select Chassis/Function

CO-220-MS-75 Classroom Security $1,685.00

Note: Price includes (1) pre-paired Remote Lockdown Fob, p/n 44485001, shipped with lock. Additional fobs available under "CO-Series Accessories."

CO-220-MS-75-PR

CO-220-MS-75-PRK

CO-220-MS-75-MSK

CO-220-MS-75-MS

CO-220-MS-75-KP

5. Select Reader (Note: CO-Series readers are not interchangeable)

KP	Keypad	STANDARD
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
PR	Proximity	$171.00
PRK	Proximity + Keypad	$239.00

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.90
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

4B 4AA Battery Kit	STANDARD

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD	STANDARD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075 Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-220 Classroom Lockdown Solution - Exit Trim

1-3. Select Chassis/Exit Trim Type*

CO-220-993R	Exit Rim/† Concealed Vertical Rod/† Concealed Vertical Cable	$1,854.00
CO-220-993M	Exit Mortise Lock	$1,872.00

^* See page 172 for exit device compatibility. †

CO-220-993R-75-MSK

CO-220-993R-75-MS

CO-220-993R-75-KP

CO-220-993R-75-PR

CO-220-993R-75-PRK

4. Select Function

	5. Select Reader (Note: CO-Series readers are not interchangeable)
KP	Keypad	N/C
MS	Magnetic Stripe (Swipe)	$103.00
MSK	Magnetic Stripe (Swipe) + Keypad	$171.00
PR	Proximity	$171.00
PRK	Proximity + Keypad	$239.00

75 Classroom/Security STANDARD

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $35.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

Metal door only.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

4B 4AA Battery Kit	STANDARD

12. - 13. No Selection Required

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

CO-Series Exit Trim

The CO-220 Exit Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99, 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Mortise.

Von Duprin 22/22F - Rim

Falcon 25 - Rim

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 kit)

Note: CO-Series Non-Functioning "Dummy" Exit Trim now available. Please see page 200 for details

Accessories available, see pages 210-211.

Accessories include Decorative Plates, Handheld Device, etc.

Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-993DT – Non-Functioning Dummy Trim for Exit

1-3. Select Chassis/ Exit Trim Type*

CO-993DT	Dummy Trim with Dummy Reader Cover and CO-100/200/250 Interior Escutcheon for Exit Rim/† Concealed Vertical Rod/† Concealed Vertical Cable/Surface Vertical Rod/Mortise Lock	$740.00
CO-220-993DT	Dummy Trim with Dummy Reader Cover and CO-220 Interior Escutcheon for Exit Rim/† Concealed Vertical Rod /† Concealed Vertical Cable / Mortise Lock	$678.00

^* See page 172 for exit device compatibility. † Metal door only.

CO993DT

4. Select Lever*

LLL	Less each lever	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

5. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

6. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

CO-993DT – Non-Functioning Dummy Trim for Exit

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6

Small Format Interchangeable Core

7. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

8. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

9. - 10. No Selection Required

11. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

CO-Series Exit Trim

The CO-Series Exit Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99, 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Surface Vertical Rod* , Mortise.

Von Duprin 22/22F

Rim, Surface Vertical Rod*

Falcon 25 - Rim

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 kit)

*CO-100, CO-200 and CO-250 only.

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-250 Rights on Card - Cylindrical

1-4. Select Chassis/Function

CO-250-CY-70	Classroom/Storeroom	$1,261.00
CO-250-CY-50	Office	$1,271.00
CO-250-CY-40	Privacy	$1,271.00

CO-250-CY-70-MS

CO-250-CY-70-MSK

5. Select Reader (Note: CO-Series readers are not interchangeable)

MS	Magnetic Stripe (Swipe)	N/C
MSK	Magnetic Stripe (Swipe) + Keypad	$70.10

6. Select Lever*

LLL	Less each lever	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

4B 4AA Battery Kit	STANDARD

12. Select Backset & Latchbolt

LLL	Less Latch	DEDUCT $35.20
13-247	2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"	STANDARD
14-049	2-3/4" Backset, Deadlatch Anti-friction fire door latch, Square corner, 1-1/8" x 2-1/4", 3/4" throw	$186.00
14-051	2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	N/C
14-050	3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"	$11.00
43-001	5" Backset extension link, Deadlatch	$34.10
39-030*	Rabbeted latch and strike kit, 605 and 626 only	$59.80

^* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.

13. Select Strike Plate

LLL	Less Strike Plate	DEDUCT $4.60
10-025	1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8"	STANDARD
10-013*	1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4"	N/C
10-016	1-1/8" Lip, Square Corner, T-strike, deep box, fire door latch	N/C
K510-066	Box for ANSI strike (Must be specific)	N/C

^{* 1-1/2&} quot; Lip available, must specify 1-1/2" Lip $8.00

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-250 Rights on Card - Mortise/Mortise Deadbolt

1-3. Select Chassis/Function

CO-250-MS	Mortise	$1,492.00
CO-250-MD	Mortise Deadbolt	$1,564.00

CO-250-MS-70-MSK

CO-250-MS-70-MS

4. Select Function

70	Classroom/Storeroom (Not available on mortise deadbolt)	STANDARD
50	Office (Not available on mortise deadbolt)	$10.00
40	Privacy ¢	$10.00

¢ Inside Push Button (IPB) only included with Mortise (MS) chassis. Mortise deadbolt (MD) chassis comes with LED indicator only. $10 charge does not apply to mortise deadbolt (MD) chassis.

5. Select Reader (Note: CO-Series readers are not interchangeable)

MS	Magnetic Stripe (Swipe)	N/C
MSK	Magnetic Stripe (Swipe) + Keypad	$70.10

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $66.90
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

CO-250 Rights on Card - Mortise/Mortise Deadbolt

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RH	Right Handed	N/C
LH	Left Handed	N/C
RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

4B 4AA Battery Kit	STANDARD

12. Select Mortise Lock Armor Front

LLL	Less Armor Front	DEDUCT $17.30
09-663	1-1/4" Wide Square Corner, Latch for MS	STANDARD
09-669	1-1/16" Wide Square Corner, Latch, options for MS	N/C
09-666	1-1/4" Wide Square Corner, Latch x Deadbolt for MD	STANDARD
09-672	1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD	N/C

13. Select Strike Plate

LLL	Less Strike	DEDUCT $13.60
10-072	1-1/4" x 4-7/8" Square Corner + box; 1-3/16" lip length	STANDARD
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1" or 1-1/2"	N/C
10-072xx	1-1/4" x 4-7/8" Square Corner + box; specify lip length (xx) as 1-3/4"	$32.20
10-075 Å	1/2" Rabbeted	$111.00
37-015	Strike Frame Reinforcer, specify 37-015	N/C

Å For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use 1-1/4" wide armor front. r Extended leadtime, consult customer service.

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 138	1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)	$60.70

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line..

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-250 Rights on Card - Exit Trim

1-3. Select Exit Trim Type*

CO-250-993R	$1,636.00
CO-250-993S	$1,652.00
CO-250-993M	$1,652.00

^* See page 172 for exit device compatibility. †

Metal door only.

CO-250-993R-70-MS

CO-250-993R-70-MSK

4. Select Function

5. Select Reader (Note: CO-Series readers are not interchangeable)
MS	Magnetic Stripe (Swipe)	N/C
MSK	Magnetic Stripe (Swipe) + Keypad	$70.10

70 Classroom/Storeroom STANDARD

6. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

7. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

8. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

9. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

10. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

11. Select Battery

4AA Battery Kit 4B	STANDARD

12. - 13. No Selection Required

14. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

CO-Series Exit Trim

The CO-100 Exit Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99, 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Surface Vertical Rod, Mortise.

Von Duprin 22/22F

Rim, Surface Vertical Rod

Falcon 25 - Rim

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 kit)

Note: CO-Series Non-Functioning "Dummy" Exit Trim now available.

Please see pages 208-209 for details

Accessories available, see pages 210-211.

Accessories include Decorative Plates, Handheld Device, etc.

Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line..

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-993DT – Non-Functioning Dummy Trim for Exit

1-3. Select Chassis/ Exit Trim Type*

CO-993DT Dummy Trim with Dummy Reader Cover for Exit Rim/† Concealed Vertical Rod/† Concealed Vertical Cable/ Surface Vertical Rod/Mortise Lock

$740.00

^* See page 172 for exit device compatibility. † Metal door only.

4. Select Lever*

LLL	Less interior and exterior levers	DEDUCT $23.70
SPA	Sparta	N/C
RHO	Rhodes	N/C
ATH	Athens	N/C
TLR	Tubular	N/C
BRW	Broadway	N/C
BRK	Boardwalk	N/C
LAT	Latitude	N/C
LON	Longitude	N/C

^* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $47.00 per lever. Applied to exterior lever only unless otherwise specified. Not available with 643e finish.

5. Select Finish

626	Satin Chrome	N/C
605	Bright Brass	$143.00
606	Satin Brass	$143.00
612	Satin Bronze	$143.00
619	Satin Nickel	$143.00
625	Bright Chrome	$143.00
643e	Aged Bronze	$143.00
626AM	Satin Chrome Antimicrobial	$184.00

6. Select Cylinder Type

P År	With Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard)	N/C
L	Less Cylinder, Schlage, Falcon, 6 Pin KIL	DEDUCT $65.00
R ţ	With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC	$39.00
J	Less Cylinder, Schlage, 6 Pin FSIC	DEDUCT $36.00
G ţ	With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) SFIC	$87.00
B	Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC)	N/C
L SAR	Less Cylinder, Sargent (10L + 11L), 6 Pin KIL	N/C
L CO6	Less Cylinder, Corbin, 6 Pin KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J SAR	Less Cylinder, Sargent 6300, 6 Pin FSIC	N/C
J CO6	Less Cylinder, Corbin 8000, 6 Pin FSIC	N/C
J CO7	Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR)	N/C
J MED	Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
J YA6	Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC	N/C
J YA7	Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles)	N/C
L FA7	Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles)	N/C

Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

For additional assistance on Master Keying as well as restricted keyways please contact customer service.

r For Master Keying, additional line item 50-210 is required, $20.70 each.

^£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.

CO-993DT – Non-Functioning Dummy Trim for Exit

Full Cylinder PD LD LD SAR LD FA7

Full Size Interchangeable Core RD JD JD SAR JD CO6 JD YA6 JD CO7

Small Format Interchangeable Core GD BD

7. Select Keying Type

Open Keyway Families: KIL or FSIC2
S123	Everest 29 S (Key in Lever or FSIC)	STANDARD
C123	Everest C	N/C
C/CE/E/EF/ F/ FG/ G	Classic Obverse	N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T	Everest 29 T	$18.00
D	Everest D	$18.00
Classic Restricted	Quad, Numbered, Reverse	$18.00
Restricted Keyway Families: SFIC3
29 R	Everest 29 R	N/C
B	Everest B	N/C

^1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,

8. Select Handing (Field Reversible)

RHR	Right Handed Reverse	N/C
LHR	Left Handed Reverse	N/C

9. - 10. No Selection Required

11. Select Door Thickness

134	1-3/4"	STANDARD
Example 200	1-3/4" to 2-3/4", (Specify in 1/8" increments)	$60.70

CO-Series Exit Trim

The CO-100 Exit Trim comes with a universal mounting plate and is compatible with the following exit devices:

Von Duprin 98/99, 98/99XP

Rim, Concealed Vertical Rod (metal door only), Concealed Vertical Cable (metal door only), Surface Vertical Rod, Mortise.

Von Duprin 22/22F

Rim, Surface Vertical Rod

Falcon 25 - Rim

Sargent 80 Series (Narrow design & reversible rim exits not compatible) - Rim

Corbin Russwin 5000 Series - Rim

Yale 7000 - Rim

Dorma 9300 - Rim

Precision 21 - Rim (2100 converts to 21 with Precision's BP21 kit)

Accessories available, see pages 210-211. Accessories include Decorative Plates, Handheld Device, etc. Credentials available, see pages 26-31.

see page 305. 2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.

^3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should accompany the master keyed order, see page 293.

CO-Series Accessories

Product ID	Product Description	Product Specification	Price
Handheld Device
HHD KIT-USB	Handheld Device Kit	Includes Handheld Device pre-loaded with SUS Application, and HHD-USB Cable.	$1,332.00
		Used to initialize, manage, and test AD and CO Series devices
HH-USB	USB Replacement Cable	Used to connect Handheld Device to USB locks and accessories.	$59.70
HH-2PIN SERIAL	Handheld Device Accessories (Legacy Product Support) Serial Cable	Used to connect current model HHD (BM170) directly to legacy serial products without the need of a CIP	$148.00
HH-SERIAL	Serial Cable*	Used to connect previous model HHD (BM150) with CIP to program serial products.	$133.00
PIMWA-CV	Null Converter	Used to connect Handheld Device to WA Series PIM, using HH-SERIAL Serial Cable. (compatible to current and previous model HHDs)	$26.70
P512112	Computer Interface Module (CIP)*	Used to program serial products using HH-SERIAL Serial Cable.	$341.00
P101203	CIP with iButton Reader*	Used to program serial products using HH-SERIAL Serial Cable.	$361.00

^* Not compatible to current HHD (BM170)

Reader Module Accessories

510310 Magnetic Stripe Cleaning Cards See page 230

Battery Holder & Cover Kit - (Select by Chassis Type) - (Please specify FINISH - Example: 4B-CM-626)

Cylindrical
4B-CM (23599202)	Battery Holder Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, (2) Battery Strap Screws, 4AA Battery Cover, Cover Screw, Torx Cover Screw)	See page 242
Mortise
4B-CM (23599202)	Battery Holder Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, (2) Battery Strap Screws, 4AA Battery Cover, Cover Screw, Torx Cover Screw)	See page 242
Exit
4B-E (23599285)	Battery Holder Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, (2) Battery Strap Screws, 4AA Battery Cover, Cover Screw, Torx Cover Screw)	See page 242

Decorative Plate - (Select by Size) - (Please specify FINISH - Example: 23760283-626)

23631823	1.5" x 3.25" x .105" Decorative Plate (with Screws) - (Exit Trim)	See page 241
23760267	1.7" x 3.5" x .075" Decorative Plate (with Screws)	See page 241
23760283	3.2" x 3.5" x .075" Decorative Plate (with Screws)	See page 241
23760317	6.0" x 3.5" x .075" Decorative Plate (with Screws)	See page 241
23760325	6.6" x 3.5" x .075" Decorative Plate (with Screws)	See page 241
23760309	8.0" x 3.5" x .075" Decorative Plate (with Screws)	See page 241
23760291	8.0" x 3.5" x .075" Decorative Plate (with Screws and Welded Standoff)	See page 241
23760259*	10.5" x 3.5" x .075" Decorative Plate (no Screws necessary) - (Under Lock)	See page 241
23760275*	12.0" x 3.5" x .075" Decorative Plate (no Screws necessary) - (Under Lock)	See page 241

^* Please consider overall Door Thickness when ordering

Note: Single Decorative Plate. Interior and Exterior Decorative Plates may be required.

Note: Decorative Plates may have multiple applications. Please refer to AD-Series Retrofit Template Overlay guide at www.schlage.com/support for more information Available Finishes: 626 Satin Chrome Standard. Please consult Customer Care for 605 Bright Brass or 643E Aged Bronze.

Shim Plates

Note: Device is 0.063" thick
23458599	Exterior Shim Plate	See page 242
23599368	Interior Shim Plate	See page 242

Wood Mounts

23740277	CO-Series Cylindrical Mount	$213.00
23740285	CO-Series Mortise Mount	$247.00
23740269	AD-Series & CO Series Exit Trim Mount	$338.00

CO-Series Accessories

CO-250 Standalone Accessories

Product ID	Product Description		Price
Installation Tools
40-286	Universal Clamp		$512.00
40-289	CO Series mortise lock installation template		$1,068.00
40-291	Universal mortise door position switch (DPS) installation template		$146.00
40-290	CO Series cylindrical lock installation template		$1,068.00
40-292	Universal cylindrical door position switch (DPS) installation template		$153.00
	Note: The universal clamp above is necessary when using the remaining products to ensure hole placement accuracy.
	The "Universal" (Clamp & DPS) products are for use in all CO, AD and LE product installations.
	CO-200 Standalone Accessories
	Express Level Software Package
SXPR-SFT-1	Express Offline Lock Software	Recommended for offline locks of fewer than 1000 users and/or 100	$493.00
		access points. Reporting of last 1000 events capability will retrieve
		audit trails. Must be installed on a computer that meets the minimum requirements (refer to software datasheet)
	Note: Refer to Software Levels Datasheet for features and details
	Express Level Software Package Accessories
P512112	Express Computer Interface Module	Used to program legacy CM/CL/KC products, using HH-SERIAL Serial Cable	$341.00
P101203	Express Computer Interface Module (with iButton)	Used to connect PC/laptop to access device	$361.00
P394548	Express Female to Female Serial Cable	Used to connect P101203 Computer Interface Module to PC/laptop	$66.80
SDB9USBCBL	Express Male DB9 to USB 6" Cable Adapter	Used to connect a USB Port device to a Serial Port device	$107.00
CRM2	Express Magnetic Stripe Enrollment Reader		$730.00
CRP2	Express Proximity Enrollment Reader		$589.00
	Express Installation & Training
	SCH-EXP-INST Express Installation & Training	Includes software installation and training. Provided by Allegion Security &	$441.00
		Safety Consultant remotely from factory. (No discounts apply)
	CO-220 Classroom Lockdown Accessories
24744856	Remote lockdown fob	Can be paired with up to ten locks	$145.00

CL-ENCODER-2 Campus Lock Magnetic Stripe Encoder ISO compatible high/low coercivity with female/male serial cable. $4,570.00

CT5000

The CT5000 is an indoor, offline single opening controller. It is flexible and works with various card reader technologies. With the correct power supply, the CT5000 controller works with various types of locking hardware, including electric strikes, electro-magnetic locks, or EL exit devices.

If networked functionality is required in the future, the CT5000 can be upgraded to a WRI-400 by upgrading the firmware and adding one incremental piece of hardware. This provides greater adaptability in the field.

Operator CT5000 CT5000 CT5000 Card Reader Pushbutton PS902 Power Supply Electric Strike TPE TPE PS914 Card Reader Card Reader Electric EL Exit Device EL Exit Device Strike Perimeter Door Application The CT5000 can be used for perimeter door applications with an automatic operator, electric strike and card reader Narrow Stile Application For narrow stile applications the CT5000 can be used with an electric strike and card reader Panic Device Application The CT5000 and a card reader along with the Von Duprin 914 Power Supply can control two EL exit devices for double door applications PS902 Power Supply PS902 Power Supply

Note: All hardware shown above including exit devices, electric strikes, auto operators, power supplies, push buttons, etc. are sold separately.

Certifications

• UL 294
• Canada UL
• FCC Part 15
• Canada RSS 210
• RoHS

Features

• Supports up to 5000 users and audits
• Comes standard with 15 foot USB remote cable connector
• Programmed using Schlage Handheld Device (HHD) via USB connection
• Power is hardwired
• Three form C relay outputs (for strike, auxiliary, and alarm)
• Supports Request to exit (remote release) and Door Position Switch input.
• Card functions supported: normal, toggle, freeze, pass through, construction, lock down, and all card plus PIN applications
• Multiple reader technologies and positions on both sides of the gate/ door
• Internal LED visual indicators (Including low battery and state of the relay)
• Compatible with Schlage Express

Credential Compatibility

• Magnetic stripe: field configurable track 1, 2, or 3
• Compatible with Schlage, Xceed ID™, AWID®, HID®, GE/CASI ProxLite®
• 125 kHz Proximity cards: 26a, 34x, 35x, 37x bit formats (reader dependant)
• 13.56 MHz Smart card: 26a,34x, 35x, 37x, 40x, 48x bit format (reader dependant)
• Can read card serial number of Mifare DESfire (reader dependant)

The following readers are UL294 listed for use with the CT5000:

• Essex Electronics model KTP-162
• Mercury Security models MR-5 and MR-20
• XceedID models PR10, MT11, MT15, MTK15, SM10

CT5000	Offline Controller (15 ft. USB cable standard)	$1,082.00
PS-902	2 amp Power Supply (Required)	See page 256
HHD-Kit	Schlage Handheld Programming Device (Required)	See page 210
23745565	125 ft. USB cable for CT5000 (Optional)	$146.00

AD-SERIES PARTS - TABLE OF CONTENTS
READER MODULE SCREWS	216
INTERIOR ESCUTCHEON	216
EXTERIOR ESCUTCHEON	216
EXTERIOR GASKET KIT	216
BASE PLATE SUB ASSEMBLY	217
MOUNTING HARDWARE	217
EXTERIOR SPRING CAGE	218
TAILPIECE	219
CYLINDER	221
LEVER	221
LOCK RETRACTOR	224
STRIKE PLATE	224
DOOR THICKNESS KIT	225
MISCELLANEOUS	226

CONTACT INFORMATION FOR AD-SERIES PARTS

Payment Address: Schlage Electronic Security 15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service:	Technical Support:
Order Status, Credit Returns of Non-Defective	Technical Questions/Issues, Returns of
Products, General Sales Questions	Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:
Order_Entry_Schlage_Commercial@allegion.com	Electronic_Lock_TechProdSupport@allegion.com

For AD-Series Parts Warranty Information please see page 13.

AD-Series Parts

		Reader Module - (Please specify FINISH - Example: KP-626)
	New Part Number Original Part Number	Description	List Price
	KP	Keypad Only Reader Module	See page 166
	MG	Magnetic Stripe (Insert) Reader Module - (Track 1, 2, or 3)	See page 166
	MGK	Magnetic Stripe (Insert) with Keypad Reader Module - (Track 1, 2, or 3)	See page 166
	MS	Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	See page 166
	MSK	Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	See page 166
	MT	Multi-Technology Reader Module - (125 kHz Proximity and 13.56 MHz Smart)	See page 166
	MTK	Multi-Technology with Keypad Reader Module - (125 kHz Proximity and 13.56 MHz Smart)	See page 166
	SI	Smart Technology iClass Compatible Reader	See page 166
	SIK	Smart Technology iClass Compatible Reader + Keypad	See page 166
	FMK DT	FIPS Multi-Technology with Keypad Reader Module - (125 kHz Proximity and 13.56 MHz Smart) Dummy Trim Reader Cover	See page 166 See page 166
		Reader Module Screws - (Please specify DOOR THICKNESS - Example: 46928511-138 for 1-3/8")
	46928511	Screws, Reader Module Assembly - (1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", 2-3/8", 2-1/2", 2-5/8", and 2-3/4")	$10.30
	Magnetic Swipe Cleaning Cards
	510310	Magnetic Stripe Cleaning Cards	$39.70
		Interior Escutcheon - (Select by Chassis Type) - (Please specify FINISH - Example: 46929014-626)
	Cylindrical 46929014	Interior Escutcheon (with Baseplate Screws)	$76.80
	Mortise
	46929014	Interior Escutcheon (with Baseplate Screws)	$76.80
	Mortise Deadbolt
	46929022	Interior Escutcheon (with Baseplate Screws)	$76.80
	Exit
	46929279	Interior Escutcheon (with Baseplate Screws)	$59.80
Interior Baseplate Gasket
	46928982	Interior Baseplate Gasket	$34.40
	USB Cover Plug, 10-Piece Bulk Pack
46928719	46928719	USB Cover Plug (10-Piece Bulk Pack)	$25.60
	New
47258550		USB Cover Plug, Exit (10-Piece Bulk Pack)	$25.60
47253409	New	Cable, USB, AD/CO, Exit	$22.60
Cylindrical		Exterior Escutcheon - (Select by Chassis Type) - (Please specify FINISH - Example: 46928743-626)
	46928743
46928743		Exterior Escutcheon (with Baseplate Screws)	$127.00
Mortise
46928743	46928750	Exterior Escutcheon (with Baseplate Screws)	$127.00
	46928743
Exit
47258398	46928750 46928743	Exterior Escutcheon (with Baseplate Screws)	$127.00
		Exterior Escutcheon, 10-Piece Bulk Pack- (Select by Chassis Type) - (Please specify FINISH - Example: 23608532-626)
Cylindrical
23608532	23608532	Exterior Escutcheon (with Baseplate Screws)	$645.00
Mortise
23608532	23608540	Exterior Escutcheon (with Baseplate Screws)	$645.00
	23608532
Exit
47260731	23608540 23608532	Exterior Escutcheon (with Baseplate Screws)	$645.00
	Exterior Gasket Kit - (Select by Chassis Type)
Cylindrical
47260740	46929154	Exterior Gasket Kit (Includes Exterior Baseplate Gasket, Spindle Cover Seal, Reader O-Ring)	$51.50
	Mortise
47260740	46929162	Exterior Gasket Kit (Includes Exterior Baseplate Gasket, Spindle Cover Seal, Reader O-Ring)	$51.50
	Exit
47260741	46929162	Exterior Gasket Kit (Includes Exterior Baseplate Gasket, Spindle Cover Seal, Reader O-Ring)	$51.50

	New Part Number Original Part Number Description		List Price
		Interior Baseplate Sub-Assembly - (Select by Chassis Type) - (Please specify CLASS - Example: 46928990-200)
Cylindrical
47261347	46928990	Interior Baseplate Sub-Assembly - (Less Lever, Less Escutcheon, Less Spring Cage)	$939.00
	Mortise
47261347	46928990	Interior Baseplate Sub-Assembly - (Less Lever, Less Escutcheon, Less Spring Cage)	$939.00
	Exit
46929253	46929253	Interior Baseplate Sub-Assembly - (Less Escutcheon, Less Battery Cover, Less Communication Module Cover)	$682.00
		Exterior Baseplate Sub-Assembly - (Select by Chassis Type) - (Please specify CYLINDER DETAIL - Example: 46928529-LD)
Cylindrical
47260732	46928529	Exterior Baseplate Sub-Assembly - (Less Lever, Less Cylinder, Less Escutcheon)	$793.00
	Mortise
47260738	46928537 Exit	Exterior Baseplate Sub-Assembly - (Less Lever, Less Cylinder, Less Escutcheon)	$830.00
47260739	46928545	Exterior Baseplate Sub-Assembly - (Less Lever, Less Cylinder, Less Escutcheon)	$793.00
	Interior Baseplate Spacer for SVR
Exit	46929238	Interior Baseplate Spacer for SVR (with Baseplate Mounting Screws, Surface Mount Screws)	$47.80
	Interior Wireless Cover Spacer for SVR
Exit
	46929246	Interior Wireless Cover Spacer for SVR (with Surface Mount Screw)	$34.40
	Interior Mounting Plate
	46929030	Interior Mounting Plate (with Screws)	$51.50
		Exit Device Mounting Plate- (Please specify FINISH - Example: 46929220-626)
Exit
Obsolete	46929220	Exit Device Mounting Plate (with (2) Baseplate Mounting Screws)	$76.80
	Exit Device Mounting Hardware Kit -
		(Please specify Device Type (993R, 993S or 993M), DOOR THICKNESS, FINISH - Example: 46929287-993M-626-134)
Exit
47260744	46929287	Exit Device Mounting Hardware Kit (Upper Mounting Bolts, Lower Mounting Sex-Bolts, Reader Mounting Bolts, Finish Washers, Screws)	$85.70
Interior Spring Cage
47260743	46929006	Interior Spring Cage (with Screws)	$57.80

AD-Series Parts

	Exterior Spring Cage (with Screws)	- (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail)
Cylindrical New Part Number	Original Part Number	Description	List Price
	46928552	Schlage, KIL, PD/LD
	46928552	Schlage, FSIC, RD/JD
	46928560	Schlage, SFIC, GD/BD
47258543	23845969	Falcon, KIL, LD FA7 (7-PIN)	$71.90
	46928586	Corbin Russwin, FSIC, JD CO6 (6-PIN)
	23990674	Corbin Russwin, FSIC, JD CO7 (7-PIN)
	46928578	Sargent, KIL, LD SAR (6-PIN)
	46928586	Sargent, FSIC, JD SAR (6-PIN)
	24281735	Medeco, FSIC, JD MED (6-PIN)
47258544	46928644	Yale, FSIC, JD YA6 (6-PIN)	$343.00
	24281768	Yale, FSIC, JD YA7 (7-PIN)
Mortise
	46928602	Schlage, KIL, PD/LD
	46928610	Schlage, FSIC, RD/JD
	46928560	Schlage, SFIC, GD/BD
47258543	23845977	Falcon, KIL, LD FA7 (7-PIN)	$71.90
	46928636	Corbin Russwin, FSIC, JD CO6 (6-PIN)
	23988033	Corbin Russwin, FSIC, JD CO7 (7-PIN)
	46928628	Sargent, KIL, LD SAR (6-PIN)
	46928636	Sargent, FSIC, JD SAR (6-PIN)
	24281735	Medeco, FSIC, JD MED (6-PIN)
47258544	46928644	Yale, FSIC, JD YA6 (6-PIN)	$343.00
	24281768	Yale, FSIC, JD YA7 (7-PIN)
Exit
	46928651	Schlage, KIL, PD/LD (Steel Levers)
	46928553	Schlage, FSIC, RD/JD (Steel Levers)
	46928669	Schlage, SFIC, GD/BD (Zinc Levers)
47258545	23779838	Falcon, KIL, LD FA7 (7-PIN) (Steel Levers) - (Except ATH, 8AT Lever Style)	$175.00
	46928693	Corbin Russwin, FSIC, JD CO6 (6-PIN) (Steel Levers)
	23988017	Corbin Russwin, FSIC, JD CO7 (7-PIN) (Steel Levers) - (Except ATH, 8AT Lever Style)
	46928677	Sargent, KIL, LD SAR (6-PIN) (Steel Levers)
	46928685	Sargent, FSIC, JD SAR (6-PIN) (Steel Levers)
	24289902	Medeco, FSIC, JD MED (6-PIN)
47258546	46928701	Yale, FSIC, JD YA6 (6-PIN) (Steel Levers)	$345.00
	24289928	Yale, FSIC, JD YA7 (7-PIN)
		Exterior Spring Cage & Tailpiece Kit (for Schlage), 10-Piece Bulk Pack - (Select by Chassis, Cylinder OEM, Cylinder Type, Cylinder Detail)
Cylindrical 47259238	23593270	Schlage, KIL, PD/LD	$712.00
47259239	23593288	Schlage, FSIC, RD/JD	$712.00
47259240	23593304	Schlage, SFIC, GD/BD	$712.00
Mortise
47259238	23593346 23593353	Schlage, KIL, PD/LD Schlage, FSIC, RD/JD	$712.00
			$712.00
47259239
47259240	23593304	Schlage, SFIC, GD/BD
Exit
47259249	23593271	Schlage, KIL, PD/LD
47259250	23593272 23593437	Schlage, FSIC, RD/JD	$712.00 $1,584.00 $2,366.00

		Exterior Spring Cage & Tailpiece Kit (for Non-Schlage), Single Piece - (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail)
Cylindrical
New Part Number	Original Part Number	Description	List Price
47259244	23845985	Falcon, KIL, LD FA7 (7-PIN)	$85.90
	23593320	Corbin Russwin, FSIC, JD CO6 (6-PIN)
47259242	23990666	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$373.00
47259241	23593312	Sargent, KIL, LD SAR (6-PIN)	$348.00
47259242	23593320	Sargent, FSIC, JD SAR (6-PIN)	$373.00
47259245	24281792	Medeco, FSIC, JD MED (6-PIN)	$392.00
47259243	23593395	Yale, FSIC, JD YA6 (6-PIN)	$392.00
47259246	24281826	Yale, FSIC, JD YA7 (7-PIN)	$343.00
Mortise
47259244	23845923	Falcon, KIL, LD FA7 (7-PIN)	$85.90
	23593387	Corbin Russwin, FSIC, JD CO6 (6-PIN)
47259242	23988041	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$373.00
47259241	23593379	Sargent, KIL, LD SAR (6-PIN)	$348.00
47259242	23593387	Sargent, FSIC, JD SAR (6-PIN)	$373.00
47259245	24281792	Medeco, FSIC, JD MED (6-PIN)	$392.00
47259243	23593395	Yale, FSIC, JD YA6 (6-PIN)	$392.00
47259246	24281826	Yale, FSIC, JD YA7 (7-PIN)	$343.00
Exit
47259254	23810872	Falcon, KIL, LD FA7 (7-PIN)	$90.70
	23593274	Corbin Russwin, FSIC, JD CO6 (6-PIN)
47259252	23988025	Corbin Russwin, FSIC, JD CO7 (7-PIN) - (Except ATH, 8AT Lever Styles)	$373.00
	23593273	Sargent, KIL, LD SAR (6-PIN)
47259251			$348.00
47259252	23593274	Sargent, FSIC, JD SAR (6-PIN)	$373.00
47259255	24289936	Medeco, FSIC, JD MED (6-PIN)	$379.00
47259253	23593275	Yale, FSIC, JD YA6 (6-PIN)	$379.00
47259257	24289944	Yale, FSIC, JD YA7 (7-PIN)	$324.00
		Tailpiece (For Cylinder) - (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail)
Cylindrical
47258186	C604-243	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)	$2.00*
	C603-524	Schlage, KIL, PD/LD - (Classic Cylinders)
23446339	23446339	Schlage, FSIC, JD/RD/TD	$5.70
47258182	23779820	Falcon, KIL, LD FA7 (7-PIN)	$24.80
47258187	46929456	Universal, SFIC, BD/BDC	$16.10
47258180	23433634	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$38.20
	23854516	Corbin Russwin, FSIC, JD CO7 (7-PIN)
47258179	23433626	Sargent, KIL, LD SAR (6-PIN) - (Compatible with 10L and 11L)	$5.90
47258180	23433634	Sargent, FSIC, JD SAR (6-PIN)	$38.20
47258183	23810898	Medeco, FSIC, JD MED (6-PIN)	$89.30
47258181	23760366	Yale, FSIC, JD YA6 (6-PIN) - (Compatible with Medeco 31)	$48.80
47258184	23929722	Yale, FSIC, JD YA7 (7-PIN)	$33.00
23446347	23446347	Universal, SFIC, GD/HD	$14.10
47258185	new	Corbin Russwin, KIL LD CO6	$15.00
Mortise
	23538077	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)
47258186	23538085	Schlage, KIL, PD/LD - (Classic Cylinders)	$2.00*
23446339	23446339	Schlage, FSIC, JD/RD/TD	$5.70
47258182	23779820	Falcon, KIL, LD FA7 (7-PIN)	$24.80

47258185	new	Corbin Russwin, KIL LD CO6	$15.00
		*This part is shared with Schlage mechanical and defaults to the Schlage mechanical discount.

47258187 46929456 Universal, SFIC, BD/BDC $16.10 ^{47258180 23443435} Corbin Russwin, FSIC, JD CO6 (6-PIN) $38.20 ^23854516 Corbin Russwin, FSIC, JD CO7 (7-PIN) 47258179 23443427 Sargent, KIL, LD SAR (6-PIN) - (Compatible with 10L and 11L) $5.90 47258180 23443435 Sargent, FSIC, JD SAR (6-PIN) $38.20 47258183 23810898 Medeco, FSIC, JD MED (6-PIN) $89.30 47258181 23760366 Yale, FSIC, JD YA6 (6-PIN) - (Compatible with Medeco 31) $48.80 47258184 23929722 Yale, FSIC, JD YA7 (7-PIN) $33.00 23446347 23446347 Universal, SFIC, GD/HD $14.10

AD-Series Parts

Exit
New Part Number	Original Part Number	Description	List Price
47258186	23538077	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)	$2.00*
	23538085	Schlage, KIL, PD/LD - (Classic Cylinders)
23446339	23446339	Schlage, FSIC, JD/RD/TD	$5.70
47258182	23779820	Falcon, KIL, LD FA7 (7-PIN)	$24.80
47258187	46929456	Universal, SFIC, BD/ BDC	$16.10
23446347	N523-091	Universal, SFIC, GD/HD	$14.10
	23443435	Corbin Russwin, FSIC, JD CO6 (6-PIN)
47258180	23854516	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$38.20
47258179	23443427	Sargent, KIL, LD SAR (6-PIN)	$5.90
47258180	23443435	Sargent, FSIC, JD SAR (6-PIN)	$38.20
47258183	23810898	Medeco, FSIC, JD MED (6-PIN)	$89.30
47258181	23760366	Yale, FSIC, JD YA6 (6-PIN) - (Compatible with Medeco 31)	$48.80
47258184	23929722	Yale, FSIC, JD YA7 (7-PIN)	$33.00
23446347	23446347	Universal, SFIC, GD/HD	$16.10
47258187	09-774	Universal, SFIC, BD/BDC	$16.10
47258185	new	Corbin Russwin, KIL LD CO6	$15.00
	Tailpiece Kit- (for Exterior Escutcheon into Exit Device)
Exit Trim	46929303	Tailpiece Kit (Includes Tailpiece, Tailpiece Guide, Pine Tree Clip)	$20.50
		Tailpiece Kit, 10-Piece Bulk Pack- (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail)
Cylindrical
09-418	09-418	Schlage, KIL, PD/LD - (Classic Cylinders)	$13.80
09-417	09-417	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)	$13.80
23790611	23790611	Falcon, KIL, PD/LD	$23.30
Mortise
09-418	46928768	Schlage, KIL, PD/LD - (Classic Cylinders)	$13.80
09-417	46928776	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)	$13.80
23790611	new	Falcon, KIL, PD/LD	$23.30
Exit
09-418	46928768	Schlage, KIL, PD/LD - (Classic Cylinders)	$13.80
09-417	46928776	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)	$13.80
23790611	new	Falcon, KIL, PD/LD	$23.30
Cylindrical		Cylinder - (Select by Chassis Type, Cylinder Mechanism, Cylinder Type, Cylinder Detail)
	23-013	Classic, KIL, PD - (Only ATH, 8AT Lever Styles)	$65.00*
	23-030	Classic, FSIC, RD (Open)	$74.00
	23-030	Classic, FSIC, RD (Restricted)	$92.00
	20-750	Primus, KIL, PD - (Only ATH, 8AT Lever Styles)	$145.00
	20-740	Primus, FSIC, RD	$157.00
	20-550	Primus UL, KIL, PD - (Only ATH, 8AT Lever Styles)	$179.00
	20-750-XP	Primus XP, KIL, PD - (Only ATH, 8AT Lever Styles)	$145.00
	20-740-XP	Primus XP, FSIC, RD	$157.00
	20-550-XP	Primus UL XP, KIL, PD - (Only ATH, 8AT Lever Styles)	$179.00
Mortise
	23-118	Classic, KIL, PD - (Except ATH, 8AT Lever Styles) (Open)	$65.00*
	23-118	Classic, KIL, PD - (Except ATH, 8AT Lever Styles) (Restricted)	$83.00
	23-030	Classic, FSIC, RD (Open)	$74.00
	20-854	Primus, KIL, PD - (Except ATH, 8AT Lever Styles)	$145.00
	20-740	Primus, FSIC, RD	$157.00
	20-554	Primus UL, KIL, PD - (Except ATH, 8AT Lever Styles)	$179.00
	20-854-XP	Primus XP, KIL, PD - (Except ATH, 8AT Lever Styles)	$145.00
	20-740-XP	Primus XP, FSIC, RD	$145.00

^20-554- XP Primus UL XP, KIL, PD - (Except ATH, 8AT Lever Styles) $179.00 *This part is shared with Schlage mechanical and defaults to the Schlage mechanical discount.

Exit New Part Number	Original Part Number	Description	List Price
	23-118 23-118	Classic, KIL, PD - (Except ATH, 8AT Lever Styles) (Open) Classic, KIL, PD - (Except ATH, 8AT Lever Styles) (Restricted)	$65.00* $83.00
	23-013	Classic, KIL, PD - (Only ATH, 8AT Lever Styles)	$65.00*
	23-030	Classic, FSIC, RD (Open)	$74.00
	23-030	Classic, FSIC, RD (Restricted)	$92.00
	20-854	Primus, KIL, PD - (Except ATH, 8AT Lever Styles)	$145.00
	20-750	Primus, KIL, PD - (Only ATH, 8AT Lever Styles)	$145.00
	20-740	Primus, FSIC, RD	$157.00
	20-554	Primus UL, KIL, PD - (Except ATH, 8AT Lever Styles)	$179.00
	20-550	Primus UL, KIL, PD - (Only ATH, 8AT Lever Styles)	$179.00
	20-854-XP	Primus XP, KIL, PD - (Except ATH, 8AT Lever Styles)	$145.00
	20-750-XP	Primus XP, KIL, PD - (Only ATH, 8AT Lever Styles)	$145.00
	20-740-XP	Primus XP, FSIC, RD	$157.00
	20-554-XP	Primus UL XP, KIL, PD - (Except ATH, 8AT Lever Styles)	$179.00
	20-550-XP	Primus UL XP, KIL, PD - (Only ATH, 8AT Lever Styles)	$179.00
		Interior Lever (Closed) - (Please specify STYLE and FINISH - Example: 03-030-SPA-626)
03-230	03-030	Inside Lever, Closed - ATH, RHO, SPA, TLR	$140.00
	Exterior Lever (Less Cylinder)-
		(Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail) - (Please specify STYLE and FINISH - Example: 03-031-SPA-626)
Cylindrical
03-231	03-031	Schlage, KIL, PD/LD	$140.00
03-232	03-032	Schlage, FSIC, RD/JD	$140.00
03-200	03-000	Schlage, SFIC, GD/BD	$140.00
	23779739 (RHO)
	23779762 (SPA)
03-280	23779747 (8RO)	Falcon, KIL, LD FA7 (7-PIN)	$148.00
	23779770 (8SP)
03-266	03-066	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$260.00
	23854524 (RHO)
	23854540 (SPA)
	23854565 (TLR)
03-235	23854532 (8RO)	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$260.00
	23854557 (8SP)
	23854573 (8TR)
03-244	03-044	Sargent, KIL, LD SAR (6-PIN)	$260.00
03-277	03-077	Sargent, FSIC, JD SAR (6-PIN)	$260.00
03-237	09-388	Medeco, FSIC, JD MED (6-PIN)	$260.00
			$260.00
	09-355	Yale, FSIC, JD YA6 (6-PIN)
	09-399	Yale, FSIC, JD YA7 (7-PIN)
03-255 03-236 03-234		Corbin Russwin, KIL, LD CO6 (6-PIN)	$260.00 $260.00
New Lever Options
	NEW	BOARDWALK - Closed	$140.00
	NEW	BOARDWALK - JD BOARDWALK - PD/LD	$140.00
	NEW NEW	BOARDWALK - BDC/BD/GD/HD
	NEW	BROADWAY - Closed
	NEW	BROADWAY - JD
	NEW	BROADWAY - PD/LD	$140.00 $140.00 $140.00 $140.00 $140.00
	NEW	BROADWAY - BDC/BD/GD/HD	$140.00
	NEW	LATITUDE - Closed
	NEW	LATITUDE - JD
	NEW	LATITUDE - PD/LD	$140.00 $140.00 $140.00
	NEW	LATITUDE - BDC/BD/GD/HD
	NEW	LONGITUDE - Closed
	NEW	LONGITUDE - JD	$140.00 $140.00 $140.00
	NEW	LONGITUDE - PD/LD	$140.00
47258044 47258052 47258048 47258040 47258043 47258051 47258047 47258039 47258045 47258053 47258049 47258041 47258046 47258054 47258050 47258042	NEW	LONGITUDE - BDC/BD/GD/HD
47260554	NEW	BOARDWALK (TACTILE) - Closed
47260546	NEW	BOARDWALK (TACTILE) - JD	$140.00 $187.00 $187.00
47260550	NEW	BOARDWALK (TACTILE) - PD/LD	$187.00

AD-Series Parts

		(Please specify STYLE and FINISH - Example: 03-031-SPA-626) (continued)
New Part Number	Original Part Number	Description	List Price
New Lever Options (continued)
47260553	NEW	BROADWAY (TACTILE) - Closed	$187.00
47260545	NEW	BROADWAY (TACTILE) - JD	$187.00
47260549	NEW	BROADWAY (TACTILE) - PD/LD	$187.00
47260537	NEW	BROADWAY (TACTILE) - BDC/BD/GD/HD	$187.00
47260555	NEW	LATITUDE (TACTILE) - Closed	$187.00
47260547	NEW	LATITUDE (TACTILE) - JD	$187.00
47260551	NEW	LATITUDE (TACTILE) - PD/LD	$187.00
47260539	NEW	LATITUDE (TACTILE) - BDC/BD/GD/HD	$187.00
47260556	NEW	LONGITUDE (TACTILE) - Closed	$187.00
47260548 47260552	NEW NEW	LONGITUDE (TACTILE) - JD LONGITUDE (TACTILE) - PD/LD	$187.00 $187.00
47260540	NEW	LONGITUDE (TACTILE) - BDC/BD/GD/HD	$187.00
Mortise
03-231	09-331	Schlage, KIL, PD/LD	$140.00
03-232	09-332	Schlage, FSIC, RD/JD	$140.00
03-200	03-000	Schlage, SFIC, GD/BD	$140.00
03-280	09-331	Falcon, KIL, LD FA7 (7-PIN)	$148.00
03-266	09-366	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$260.00
03-235	09-366	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$260.00
03-244	09-344	Sargent, KIL, LD SAR (6-PIN)	$260.00
03-277	09-377	Sargent, FSIC, JD SAR (6-PIN)	$260.00
03-237	09-388	Medeco, FSIC, JD MED (6-PIN)	$260.00
03-255	09-355	Yale, FSIC, JD YA6 (6-PIN)	$260.00
03-236	09-399	Yale, FSIC, JD YA7 (7-PIN)	$260.00
03-234	NEW	Corbin Russwin, KIL, LD CO6 (6-PIN)	$260.00
New Lever Options
47258044	NEW	BOARDWALK - Closed	$140.00
47258052	NEW	BOARDWALK - JD	$140.00
47258048	NEW	BOARDWALK - PD/LD	$140.00
47258040	NEW	BOARDWALK - BDC/BD/GD/HD	$140.00
47258043	NEW	BROADWAY - Closed	$140.00
47258051	NEW	BROADWAY - JD	$140.00
47258047	NEW	BROADWAY - PD/LD	$140.00
47258039	NEW	BROADWAY - BDC/BD/GD/HD	$140.00
47258045	NEW	LATITUDE - Closed	$140.00
47258053	NEW	LATITUDE - JD	$140.00
47258049	NEW	LATITUDE - PD/LD	$140.00
47258041	NEW	LATITUDE - BDC/BD/GD/HD	$140.00
47258046	NEW	LONGITUDE - Closed	$140.00
47258054	NEW	LONGITUDE - JD	$140.00
47258050	NEW	LONGITUDE - PD/LD	$140.00
47258042	NEW	LONGITUDE - BDC/BD/GD/HD	$140.00
47260554	NEW	BOARDWALK (TACTILE) - Closed	$187.00
47260546	NEW	BOARDWALK (TACTILE) - JD	$187.00
47260550	NEW	BOARDWALK (TACTILE) - PD/LD	$187.00
47260538	NEW	BOARDWALK (TACTILE) - BDC/BD/GD/HD	$187.00
47260553	NEW	BROADWAY (TACTILE) - Closed	$187.00
47260545	NEW	BROADWAY (TACTILE) - JD	$187.00
47260549	NEW	BROADWAY (TACTILE) - PD/LD	$187.00
47260537	NEW	BROADWAY (TACTILE) - BDC/BD/GD/HD	$187.00
47260555	NEW	LATITUDE (TACTILE) - Closed	$187.00
47260547	NEW	LATITUDE (TACTILE) - JD	$187.00
47260551	NEW	LATITUDE (TACTILE) - PD/LD	$187.00

Pricing/product description subject to change without notice.

47260539 NEW LATITUDE (TACTILE) - BDC/BD/GD/HD $187.00 47260556 NEW LONGITUDE (TACTILE) - Closed $187.00 47260548 NEW LONGITUDE (TACTILE) - JD $187.00 47260552 NEW LONGITUDE (TACTILE) - PD/LD $187.00 47260540 NEW LONGITUDE (TACTILE) - BDC/BD/GD/HD $187.00

03-231 03-331 Schlage, KIL, PD/LD $140.00 03-232 03-332 Schlage, FSIC, RD/JD $140.00 03-200 03-300 Schlage, SFIC, GD/BD $140.00

Exit

New Part Number	Original Part Number	(Please specify STYLE and FINISH - Example: 03-031-SPA-626) (continued) Description	List Price
Exit (Continued)
03-280	03-331	Falcon, KIL, LD FA7 (7-PIN)	$148.00
03-266	03-366	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$260.00
03-235	03-366	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$260.00
03-244	03-344	Sargent, KIL, LD SAR (6-PIN)	$260.00
03-277	03-377	Sargent, FSIC, JD SAR (6-PIN)	$260.00
03-237	03-388	Medeco, FSIC, JD MED (6-PIN)	$260.00
03-255 03-236	03-355 03-399	Yale, FSIC, JD YA6 (6-PIN) Yale, FSIC, JD YA7 (7-PIN)	$260.00 $260.00
03-234	NEW	Corbin Russwin, KIL, LD CO6 (6-PIN)	$260.00
New Lever Options
47258044	NEW	BOARDWALK - Closed	$140.00
47258052	NEW	BOARDWALK - JD	$140.00
47258048	NEW	BOARDWALK - PD/LD	$140.00
47258040	NEW	BOARDWALK - BDC/BD/GD/HD	$140.00
47258043	NEW	BROADWAY - Closed	$140.00
47258051	NEW	BROADWAY - JD	$140.00
47258047	NEW	BROADWAY - PD/LD	$140.00
47258039	NEW	BROADWAY - BDC/BD/GD/HD	$140.00
47258045	NEW	LATITUDE - Closed	$140.00
47258053	NEW	LATITUDE - JD	$140.00
47258049	NEW	LATITUDE - PD/LD	$140.00
47258041 47258046	NEW NEW	LATITUDE - BDC/BD/GD/HD LONGITUDE - Closed	$140.00 $140.00
47258054	NEW	LONGITUDE - JD	$140.00
47258050	NEW	LONGITUDE - PD/LD	$140.00
47258042	NEW	LONGITUDE - BDC/BD/GD/HD	$140.00
47260554	NEW	BOARDWALK (TACTILE) - Closed	$187.00
47260546	NEW	BOARDWALK (TACTILE) - JD	$187.00
47260550	NEW	BOARDWALK (TACTILE) - PD/LD	$187.00
47260538	NEW	BOARDWALK (TACTILE) - BDC/BD/GD/HD	$187.00
47260553	NEW	BROADWAY (TACTILE) - Closed	$187.00
47260545	NEW	BROADWAY (TACTILE) - JD	$187.00
47260549	NEW	BROADWAY (TACTILE) - PD/LD	$187.00
47260537	NEW	BROADWAY (TACTILE) - BDC/BD/GD/HD	$187.00
47260555	NEW	LATITUDE (TACTILE) - Closed	$187.00
47260547 47260551	NEW NEW	LATITUDE (TACTILE) - JD LATITUDE (TACTILE) - PD/LD	$187.00 $187.00
47260539	NEW	LATITUDE (TACTILE) - BDC/BD/GD/HD	$187.00
47260556	NEW	LONGITUDE (TACTILE) - Closed	$187.00
47260548	NEW	LONGITUDE (TACTILE) - JD	$187.00
47260552	NEW	LONGITUDE (TACTILE) - PD/LD	$187.00
47260540	NEW	LONGITUDE (TACTILE) - BDC/BD/GD/HD	$187.00
Cylindrical		Exterior Lever (Less Cylinder), 10-Piece Bulk Pack- (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail) - (Please specify STYLE and FINISH - Example: K103-031-SPA-626)
K103-681	K103-031	Schlage, KIL, PD/LD	$1,075.00*
K103-682 K103-680	K103-032 K103-000	Schlage, FSIC, RD/JD Schlage, SFIC, GD/BD	$1,281.00* $1,281.00*
K103-684	K103-066	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$1,995.00*
K103-683	K103-044	Sargent, KIL, LD SAR (6-PIN)	$2,553.00*
K103-685	K103-077	Sargent, FSIC, JD SAR (6-PIN)	$2,055.00*
K103-687	K109-388	Medeco, FSIC, JD MED (6-PIN)	$2,556.00
K103-686	K103-055	Yale, FSIC, JD YA6 (6-PIN)	$2,556.00*
K103-688	K109-399	Yale, FSIC, JD YA7 (7-PIN)	$2,556.00*
K103-689	NEW	Falcon, KIL, LD FA7 (7-PIN)	$2,055.00
	23991086 (RHO)
	23991094 (SPA)
K103-690	23991102 (TLR)	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$2,055.00
	23991110 (8RO)
	23991128 (8SP)

AD-Series Parts

Exterior Lever (Less Cylinder), 10-Piece Bulk Pack- (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail) - (Please specify STYLE and FINISH - Example: K103-031-SPA-626) New Part Number Original Part Number Description List Price Mortise K103-681 K109-331 Schlage, KIL, PD/LD $1,075.00* K103-682 K109-332 Schlage, FSIC, RD/JD $1,281.00* K103-680 K103-000 Schlage, SFIC, GD/BD $1,281.00* K103-684 K109-366 Corbin Russwin, FSIC, JD CO6 (6-PIN) $1,995.00* K103-683 K109-344 Sargent, KIL, LD SAR (6-PIN) $2,553.00* K103-685 K109-377 Sargent, FSIC, JD SAR (6-PIN) $2,055.00* K103-687 K109-388 Medeco, FSIC, JD MED (6-PIN) $2,556.00 K103-686 K109-355 Yale, FSIC, JD YA6 (6-PIN) $2,556.00* K103-688 K109-399 Yale, FSIC, JD YA7 (7-PIN) $2,556.00* K103-689 K109-331 Falcon, KIL, LD FA7 (7-PIN) $2,055.00 K103-690 K109-366 Corbin Russwin, FSIC, JD CO7 (7-PIN) $2,055.00 Exit K103-681 K103-331 Schlage, KIL, PD/LD $1,075.00* K103-682 K103-332 Schlage, FSIC, RD/JD $1,281.00* K103-680 K103-000 Schlage, SFIC, GD/BD $1,281.00* K103-689 K103-331 Falcon, KIL, LD FA7 (7-PIN) $1,995.00 K103-684 K103-366 Corbin Russwin, FSIC, JD CO6 (6-PIN) $2,553.00 K103-690 K103-366 Corbin Russwin, FSIC, JD CO7 (7-PIN) $2,055.00 K103-683 K103-344 Sargent, KIL, LD SAR (6-PIN) $2,556.00* K103-685 K103-377 Sargent, FSIC, JD SAR (6-PIN) $2,556.00* K103-687 K103-388 Medeco, FSIC, JD MED (6-PIN) $2,556.00 K103-686 K103-355 Yale, FSIC, JD YA6 (6-PIN) $2,055.00* K103-688 K103-399 Yale, FSIC, JD YA7 (7-PIN) $2,055.00* *This part is shared with Schlage mechanical and defaults to the Schlage mechanical discount.

Steel Lever Kits & Parts
Obsolete		Steel Lever Conversion Kit - (Includes Escutcheon Assembly, Spring Cage Assembly,
Obsolete	24274730-AD	Lever Rotation Stops, Screws, Instructions) - Please specify CLASS, READER, FINISH)	Obsolete
Obsolete	47250325	Stainless Steel Set Screw for outside Steel Levers (Package of 20)	Obsolete

Part Number	Description	List Price
	Lock Retractor - (Select by Chassis Type, Chassis Thickness)
Cylindrical
46928800	Retractor	$343.00
Mortise Case
46928818	1-1/16" Narrow - (Door Thicknesses 1-3/8" to 1-5/8")	$441.00
46928826	1-1/4" Standard - (Door Thicknesses 1-3/4" to 2-3/4")	$441.00
Mortise Case w/ Deadbolt
46928834	1-1/16" Narrow - (Door Thicknesses 1-3/8" to 1-5/8")	$558.00
46928842	1-1/4" Standard - (Door Thicknesses 1-3/4" to 2-3/4")	$558.00
	Spindle & Hub Kit - (Select by Chassis Type)
Exit
46929295	Exit Spindle & Hub Kit (Includes Spindle, Spindle Cover, Spindle Hub, Tailpiece, Twisted Tailpiece, Tailpiece Spring, Pine Tree Clip, Screw)	$42.80
Spindle Spring
47256978	Inside Spindle Spring (25 Pack)	$79.30
	Deadbolt Thumb Turn Assembly (with E-Clip) - (Please specify FINISH - Example: 46929113-626)
46929113	Deadbolt Thumb Turn Assembly (with E-Clip)	$344.00
	Strike Plate - Select by Chassis Type - (Please specify FINISH-SHAPE and LIP - Example -10-025-0118-0626)
Cylindrical
10-025-1316	ANSI, no box, 1-1/4" x 4-7/8", Standard with 1-3/16" Lip	$15.70*
10-025-138	ANSI, no box, 1-1/4" x 4-7/8", Standard with Lip 1-3/8" Lip	$45.00*
10-025-112	ANSI, no box, 1-1/4" x 4-7/8", Standard with 1-1/2" Lip	$45.00*
10-013 -118	Square corner, T-strike, box, 1-1/8" x 2-3/4" with 1-1/8" Lip	$12.20*
10-013 -112	Square corner, T-strike, box, 1-1/8" x 2-3/4" with 1-1/2" Lip	$17.00*
10-016	Square corner, T-strike, deep box, 1-1/8" x 2-3/4" with 1-1/8" Lip Use with Fire door latch	$16.20*
K510-066	Box for ANSI strike	$7.40*
XQ07-351-134	Strike, ANSI, No Box, 1-1/4" x 4-7/8", 1-3/4" Lip Length	$212.00*
XQ03-494-134	Strike, Square Corner, T-strike, Box, 1-1/8" x 2-3/4", 1-3/4" Lip	$175.00*
Mortise Deadbolt
10-072-1316	1-1/4" x 4-7/8" Square corner, box, standard with Lip at 1-3/16", 1", 1-1/2", 1-3/4", or 2"	$23.20*
10-072-xx	1-1/4" x 4-7/8" Square corner, box, specify lip length (xx) as 1" or 1-1/2"	$23.20*
10-072-xx	1-1/4" x 4-7/8" Square corner, box, specify lip length (xx) as 1-3/4", 1" or 2"	$59.20*
10-075	1/2" Rabbeted	$152.00*
37-015	Strike frame reinforcer	$25.80
Mortise Armor Front	- (Select by Width, Door Thickness) - (Please specify FINISH: 09-663-626)
09-663	Armor, 1-1/4" Wide Square Corner, Latch x Auxiliary latch (for door range 1-3/4" to 2-3/4")	$38.10*
09-666	Armor, 1-1/4" Wide Square Corner, Latch x Auxiliary latch x Deadbolt (for door range 1-3/4" to 2-3/4")	$38.10*

09-669 Armor, 1-1/16" Wide Square Corner, Latch x Auxiliary latch (for door range 1 -3/8" to 1-5/8") $38.10* 09-672 Armor, 1-1/16" Wide Square Corner, Latch x Auxiliary latch x Deadbolt (for door range 1-3/8" to 1-5/8") $38.10*

^* This part is shared with Schlage mechanical and defaults to the Schlage mechanical discount.

AD-Series Parts

Part Number	Description	List Price
	Door Thickness Kit - (Select by Chassis Type) - (Please specify DOOR THICKNESS - Example: 46929170-134)
Cylindrical
46929170-138	1-3/8" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$168.00
46929170-112	1-1/2" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$119.00
46929170-158	1-5/8" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$85.50
46929170-XXX	Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs) Must specify door thickness: 1-3/4" to 2-3/4" in 1/8" increments (EXAMPLE: 46929170-134 for a 1-3/4" door)	$51.50
Mortise
46929178-138	1-3/8" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$168.00
46929178-112	1-1/2" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$119.00
46929178-158	1-5/8" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$85.70
46929178-XXX	Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$51.50
	Must specify door thickness: 1-3/4" to 2-3/4" in 1/8" increments (EXAMPLE: 46929178-134 for a 1-3/4" door)

	Decorative Plate- (Select by Size) - (Please specify FINISH - Example: 23760283-626)
23631823	1.5" x 3.25" x .105" Decorative Plate (with Screws) - (Exit Chassis)	$36.40
23760267	1.7" x 3.5" x .075" Decorative Plate (with Screws)	$26.70
23760283	3.2" x 3.5" x .075" Decorative Plate (with Screws)	$41.30
23760317	6.0" x 3.5" x .075" Decorative Plate (with Screws)	$62.90
23760325	6.6" x 3.5" x .075" Decorative Plate (with Screws)	$62.90
23760309	8.0" x 3.5" x .075" Decorative Plate (with Screws)	$64.30
23760291	8.0" x 3.5" x .075" Decorative Plate (with Screws and Welded Standoff)	$87.00
23760259*	10.5" x 3.5" x .075" Decorative Plate (no Screws necessary) - (Under Lock)	$83.40
23760275*	12.0" x 3.5" x .075" Decorative Plate (no Screws necessary) - (Under Lock)	$82.60

^* Please consider overall Door Thickness when ordering

Note: Single Decorative Plate. Interior and Exterior Decorative Plates may be required.

Note: Decorative Plates may have multiple applications. Please see AD-Series Retrofit Template Overlay guide at www.schlage.com/support for more information Available Finishes: 626 Satin Chrome Standard. Please consult Customer Care for 605 Bright Brass or 643E Aged Bronze.

	Interior Shim Plate- (Select by Class)
23458607	Interior Shim Plate, AD200/250/300 - (Device is 0.063" thick)	$29.70
23458565	Interior Shim Plate, AD400 - (Device is 0.063" thick)	$29.70
Exterior Shim Plate
23458599	Exterior Shim Plate - (Device is 0.063" thick)	$23.20
Door Position Switch
46929121	Door Position Switch	$32.50
	Offline/Hardwired Communication Module Cover- (Select by Function) - (Please specify FINISH - Example: COM200C-626)
COM200C (23519168)	Offline Communication Module Cover, Cover (Includes Communication Module Cover, Cover Screw, Torx Cover Screw)	See page 166
COM200L	Offline/Hardwired Communication Module Cover, Indicator	See page 166
(23519184) COM200P	(Includes Off-Line/Hardwired Communication Module Cover with Indicator, Cover Screw, Torx Cover Screw) Offline/Hardwired Communication Module Cover, Pushbutton (Includes Offline/Hardwired Communication Module Cover with Pushbutton, Cover Screw, Torx Cover Screw)	See page 166
(23519176)
COM300L (46928909)	Hardwired Upgrade Kit - (Select by Function) - (Please specify FINISH - Example: COM300L-626) Hardwired Upgrade Kit, Indicator (Includes Hardwired Communication Module, Standoff, Offline/Hardwired Communication Module Cover with Indicator, Cover Screw, Torx Cover Screw)	See page 166

Hardwired Upgrade Kit, Pushbutton (Includes Hardwired Communication Module, Standoff, Offline/Hardwired

See page 166

Communication Module Cover with Pushbutton, Cover Screw, Torx Cover Screw)

COM300P (46928891)

Part Number	Description	List Price
	Hardwired Communication Module
46928958	Hardwired Communication Module (with Fasteners, Jumpers)	$256.00
	Wireless Upgrade Kit - (Select by Function) - (Please specify FINISH - Example: COM400L-GRY)
COM400L	Wireless Upgrade Kit, Indicator (Includes Wireless Communication Module, (2) Standoffs, Wireless Communication	See page 166
(46928867)	Module Cover with Indicator, Cover Screw, Torx Cover Screw, Wireless Foil Gasket)
COM400P (46928859)	Wireless Upgrade Kit, Pushbutton (Includes Wireless Communication Module, (2) Standoffs, Wireless Communication Module Cover with Pushbutton, Cover Screw, Torx Cover Screw, Wireless Foil Gasket)	See page 166
	Wireless Communication Module Cover - (Select by Function) - (Please specify FINISH - Example: 46928883-GRY)
46928883	Wireless Communication Module Cover, Indicator (with Screws)	$59.80
46928875	Wireless Communication Module Cover, Pushbutton (with Screws)	$68.30
	Wireless Communication Module
46928941	Wireless Communication Module (with Screws, Standoffs)	$343.00
23848385	Wireless Communication Module with Antenna Connector (with Screws, Standoffs)	$373.00
Wireless Parts
46928974	Wireless Foil Gasket	$20.50
47250326	Terminal Block Kit – (Includes one power connector and ten I/O connectors) supports	$45.70
	PIM400, PIB300, TK400, ECK400, GCK400 and WRI400
	Battery Holder & Cover Kit - (Select by Battery Quantity) - (Please specify FINISH - Example: 4B-626)
4B (46929055)	4AA Battery Holder & Cover Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, Battery Strap Screws, 4AA	$57.70
	Battery Cover, Cover Screw, Torx Cover Screw)
8B (46929089)	8AA Battery Holder & Cover Kit (Includes 8AA Battery Holder with Cable, 8AA Battery Strap, Battery Strap Screws, 8AA	$107.00
	Battery Cover, Cover Screw, Torx Cover Screw)
	Battery Holder Kit - (Select by Battery Quantity)
46929063	4AA Battery Holder Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, Battery Strap Screws)	$24.80
46929097	8AA Battery Holder Kit (Includes 8AA Battery Holder with Cable, 8AA Battery Strap, Battery Strap Screws)	$49.40
Battery Parts
4C (46929071)	4AA Battery Cover (with Screw) - Please specify FINISH - Example: 4C-626)	$33.00
8C (46929105)	8AA Battery Cover (with Screw) - Please specify FINISH	$57.70
47250305	Mylar Protective Sticker for 8 Battery Pack (Package of 20)	$148.00
47250320	AD Battery Cable (Package of 5)	$23.60
	Battery - (Select by Battery Type)
F206-488	(4) AA Batteries	$11.00
*Not for use with AD-Series Locks
46928966	Interior Cover Hardware Kit - (Please specify FINISH - Example: 46928966-626) Interior Cover Hardware Kit (Includes (2) Wireless Communication Module Cover Screws, (1) Hardwired Communication	$42.80
	Module Cover Screw, (1) 4AA Battery Cover Screw, (1) 8AA Battery Cover Screw)
	Torx Tamper Screw Pack - (Select by Chassis Type)
Cylindrical
23538812	Torx Tamper Screw Pack	$41.30
Mortise
23538820	Torx Tamper Screw Pack	$33.00
Exit	Torx Tamper Screw Pack
23538838		$40.20
	Interior Main Board - (Please specify CLASS - Example: 46929048-200 for AD-200)
46929048	Interior Main Board (with Battery Lead, Coin Cell Battery, (2) Screws)	$658.00

AD-Series Parts

Part Number	Description	List Price
	Wiring Harness (Interior Main Board to Exterior Board) - (Select by Chassis Type)
Cylindrical
46928727	Wiring Harness (Interior Main Board to Exterior Board)	$52.70
Mortise
46928727	Wiring Harness (Interior Main Board to Exterior Board)	$52.70
Exit
46928735	Wiring Harness (Interior Main Board to Exterior Board)	$52.70
23536774	RX Adapter	$49.40
	REX Switch, Leaf Spring and Screws
46929139	REX Switch, Leaf Spring and Screws - (for CY and MS/MD only)	$34.40
	Drill Bit (Same as Legacy)
P511472	Drill Bit for 3/8" VIP/AD-300	$793.00
	Request-to-Exit Switch Kit
RX-LC	Von Duprin RX-LC (also called SI-LC or Von Duprin part number 050281)	$328.00
	Please see Falcon Price Book for Falcon AE part number 650359
47269269	(WARM) KEYPAD, BASE, KEYPAD + PROX, AD, KIT	$38.70
47269271	(WARM) KEYPAD, MSK, AD, KIT	$38.70
47269273	(WARM) KEYPAD, BASE, KEYPAD + MAG READER, AD, KIT	$38.70
47269275	(WARM) KEYPAD, BASE, KEYPAD ONLY MODULE, AD, KIT	$38.70
47269170	INSIDE PUSH BUTTON, AD/CO	$59.80
47269169	MAG READER HEAD, AD	$128.00

CO-SERIES PARTS - TABLE OF CONTENTS
READER MODULE WITH EXTERIOR ESCUTCHEON	230
INTERIOR ESCUTCHEON	230
EXTERIOR ESCUTCHEON	231
BASE PLATE SUB ASSEMBLY	231
MOUNTING HARDWARE	231
INTERIOR SPRING CAGE	231
EXTERIOR SPRING CAGE	232
TAILPIECE	233
CYLINDER	235
LEVER	235
LOCK RETRACTOR	239
STRIKE PLATE	239
DOOR THICKNESS KIT	240
DECORATIVE PLATE	240
MISCELLANEOUS	241

CONTACT INFORMATION FOR CO-SERIES PARTS

Payment Address: Schlage Electronic Security 15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service:	Technical Support:
Order Status, Credit Returns of Non-Defective	Technical Questions/Issues, Returns of
Products, General Sales Questions	Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:
Order_Entry_Schlage_Commercial@allegion.com	Electronic_Lock_TechProdSupport@allegion.com

For CO-Series Parts Warranty Information please see page 13.

New Part Number	Original Part Number	Description	List Price
	Reader Module (with Exterior Escutcheon)-
		(Select by Chassis, Class, Reader Technology) - (Please specify FUNCTION, FINISH, CYLINDER TYPE, HANDING)
Cylindrical
EXT-CO-100-CY-xx-KP	EXT-CO-100-CY-xx-KP	CO-100, Keypad Only Reader Module	$475.00
EXT-CO-200-CY-xx-KP	EXT-CO-200-CY-xx-KP	CO-200, Keypad Only Reader Module	$702.00
EXT-CO-200-CY-xx-MS	EXT-CO-200-CY-xx-MS	CO-200, Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	$830.00
EXT-CO-200-CY-xx-MSK	EXT-CO-200-CY-xx-MSK	CO-200, Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	$912.00
EXT-CO-200-CY-xx-PR	EXT-CO-200-CY-xx-PR	CO-200, Proximity Reader Module - (125 kHz Proximity)	$912.00
EXT-CO-200-CY-xx-PRK	EXT-CO-200-CY-xx-PRK	CO-200, Proximity with Keypad Reader Module - (125 kHz Proximity)	$997.00
EXT-CO-250-CY-xx-MS	EXT-CO-250-CY-xx-MS	CO-250, Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	$830.00
EXT-CO-250-CY-xx-MSK	EXT-CO-250-CY-xx-MSK	CO-250, Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	$912.00
Mortise EXT-CO-100-MS-xx-KP	EXT-CO-100-MS-xx-KP	CO-100, Keypad Only Reader Module	$514.00
EXT-CO-200-MS-xx-KP	EXT-CO-200-MS-xx-KP	CO-200, Keypad Only Reader Module	$744.00
EXT-CO-200-MS-xx-MS	EXT-CO-200-MS-xx-MS	CO-200, Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	$868.00
EXT-CO-200-MS-xx-MSK	EXT-CO-200-MS-xx-MSK	CO-200, Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	$951.00
EXT-CO-200-MS-xx-PR	EXT-CO-200-MS-xx-PR	CO-200, Proximity Reader Module - (125 kHz Proximity)	$951.00
EXT-CO-200-MS-xx-PRK	EXT-CO-200-MS-xx-PRK	CO-200, Proximity with Keypad Reader Module - (125 kHz Proximity)	$1,032.00
EXT-CO-250-MS-xx-MS	EXT-CO-250-MS-xx-MS	CO-250, Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	$868.00
EXT-CO-250-MS-xx-MSK	EXT-CO-250-MS-xx-MSK	CO-250, Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	$951.00
Mortise Deadbolt
EXT-CO-200-MD-40-KP	EXT-CO-200-MD-40-KP	CO-200, Keypad Only Reader Module	$744.00
EXT-CO-200-MD-40-MS	EXT-CO-200-MD-40-MS	CO-200, Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	$868.00
EXT-CO-200-MD-40-MSK	EXT-CO-200-MD-40-MSK	CO-200, Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	$951.00
EXT-CO-200-MD-40-PR	EXT-CO-200-MD-40-PR	CO-200, Proximity Reader Module - (125 kHz Proximity)	$951.00
EXT-CO-200-MD-40-PRK	EXT-CO-200-MD-40-PRK	CO-200, Proximity with Keypad Reader Module - (125 kHz Proximity)	$1,032.00
EXT-CO-250-MD-40-MS	EXT-CO-250-MD-40-MS	CO-250, Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	$868.00
EXT-CO-250-MD-40-MSK	EXT-CO-250-MD-40-MSK	CO-250, Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	$951.00
Exit
EXT-CO-100-993-xx-KP	New	CO-100, Keypad Only Reader Module	$475.00
EXT-CO-200-993-xx-KP	New	CO-200, Keypad Only Reader Module	$702.00
EXT-CO-200-993-xx-MS	New	CO-200, Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	$830.00
EXT-CO-200-993-xx-MSK	New	CO-200, Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	$912.00
EXT-CO-200-993-xx-PR	New	CO-200, Proximity Reader Module - (125 kHz Proximity)	$912.00
EXT-CO-200-993-xx-PRK	New	CO-200, Proximity with Keypad Reader Module - (125 kHz Proximity)	$997.00
EXT-CO-250-993-xx-MS	New	CO-250, Magnetic Stripe (Swipe) Reader Module - (Track 1, 2, or 3)	$830.00
EXT-CO-250-993-xx-MSK	New	CO-250, Magnetic Stripe (Swipe) with Keypad Reader Module - (Track 1, 2, or 3)	$912.00
Keypad Membrane
	44487247	Keypad Membrane	$38.70
Magnetic Swipe Cleaning Cards
	510310	Magnetic Stripe Cleaning Cards	$39.70
		Interior Escutcheon - (Select by Chassis Type, Function) - (Please specify FINISH - Example: 23599327-626)
Cylindrical
	23599327	Interior Escutcheon, Non-Privacy	$136.00
	23599335	Interior Escutcheon, Privacy	$165.00
Mortise
	23599327	Interior Escutcheon, Non-Privacy	$136.00
	23599335	Interior Escutcheon, Privacy	$165.00
Mortise Deadbolt
	23599343	Interior Escutcheon, Non-Privacy	$152.00
	23599350	Interior Escutcheon, Privacy	$165.00
Exit
	46929279	Interior Escutcheon, Non-Privacy (with (4) Screws)	$58.20
Interior Baseplate Gasket
Exit
	46928982	Interior Baseplate Gasket	$34.40
USB Cover Plug, 10-Piece Bulk Pack
46928719	46928719	USB Cover Plug (10-Piece Bulk Pack)	$25.60
47258550	New	USB Cover Plug, Exit (10-Piece Bulk Pack)	$25.60
47253409	New	Cable, USB, AD/CO, Exit	$22.60

New Part Number	Original Part Number	Description	List Price
		Exterior Escutcheon - (Select by Chassis Type, Class, Reader Type) - (Please specify FINISH - Example: 23599053-626)
Cylindrical
47260707	23599053	Exterior Escutcheon, CO-100, KP (with (6) Screws)	$232.00
47260709	23599079	Exterior Escutcheon, CO-200, KP (with (6) Screws)	$206.00
47260705	23599038	Exterior Escutcheon, CO-200/250, PR/PRK/MS/MSK (with (6) Screws, O-Ring)	$127.00
Mortise
47260707	23599061	Exterior Escutcheon, CO-100, KP (with (6) Screws)	$127.00
47260709	23599087	Exterior Escutcheon, CO-200, KP (with (6) Screws)	$206.00
47260705	23599046	Exterior Escutcheon, CO-200/250, PR/PRK/MS/MSK (with (6) Screws, O-Ring)	$127.00
Exit
47260708	23599061	Exterior Escutcheon, CO-100, KP (with (6) Screws)	$127.00
47260710	23599087	Exterior Escutcheon, CO-200, KP (with (6) Screws)	$206.00
47260706	23599046	Exterior Escutcheon, CO-200/250, PR/PRK/MS/MSK (with (6) Screws, O-Ring)	$127.00
Exterior Gasket Kit	- (Select by Chassis Type)
Cylindrical
47260740	46929154	Exterior Gasket Kit (Includes Exterior Baseplate Gasket, Spindle Cover Seal, Reader O-Ring)	$51.50
Mortise
47260740	46929162	Exterior Gasket Kit (Includes Exterior Baseplate Gasket, Spindle Cover Seal, Reader O-Ring)	$51.50
Exit
47260741	46929162	Exterior Gasket Kit (Includes Exterior Baseplate Gasket, Spindle Cover Seal, Reader O-Ring)	$51.50
	Interior Baseplate Sub-Assembly
Exit	23599251	Interior Baseplate Sub-Assembly	$33.00
Exit	Interior Baseplate Spacer for SVR
	46929238	Interior Baseplate Spacer for SVR (with Baseplate Mounting Screws, Surface Mount Screws)	$47.90
Interior Mounting Plate
	23599244	Interior Mounting Plate (with Screws)	$41.20
		Exit Device Mounting Plate- (Please specify FINISH - Example: 46929220-626)
Exit
Obsolete	46929220	Exit Device Mounting Plate (with (2) Baseplate Mounting Screws)
	Exit Device Mounting Hardware Kit-
		(Please specify Device Type (993R, 993S or 993M), DOOR THICKNESS, FINISH - Example: 46929287-993M-626-134)
Exit 47260744	46929287	Exit Device Mounting Hardware Kit (Upper Mounting Bolts, Lower Mounting Sex-Bolts, Reader	$85.70
		Mounting Bolts, Finish Washers, Screws)
	Interior Spring Cage (with Screws)
Cylindrical
47260717	23599210	Interior Spring Cage (with Screws)	$49.50
Mortise
47260717	23599210	Interior Spring Cage (with Screws)	$49.50

New Part Number Original Part Number Description List Price Exterior Spring Cage (with Screws) - (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail) Cylindrical Schlage, KIL, PD/LD $71.90 Schlage, FSIC, RD/JD Schlage, SFIC, GD/BD Falcon, KIL, LD FA7 (7-PIN) Corbin Russwin, FSIC, JD CO6 (6-PIN) Corbin Russwin, FSIC, JD CO7 (7-PIN) Sargent, KIL, LD SAR (6-PIN) Sargent, FSIC, JD SAR (6-PIN) Medeco, FSIC, JD MED (6-PIN) $343.00 Yale, FSIC, JD YA6 (6-PIN) Yale, FSIC, JD YA7 (7-PIN) Mortise Schlage, KIL, PD/LD $71.90 Schlage, FSIC, RD/JD Schlage, SFIC, GD/BD Falcon, KIL, LD FA7 (7-PIN) Corbin Russwin, FSIC, JD CO6 (6-PIN) Corbin Russwin, FSIC, JD CO7 (7-PIN) Sargent, KIL, LD SAR (6-PIN) Sargent, FSIC, JD SAR (6-PIN) Medeco, FSIC, JD MED (6-PIN) $343.00 Yale, FSIC, JD YA6 (6-PIN) Yale, FSIC, JD YA7 (7-PIN) Exit Schlage, KIL, PD/LD (Steel Levers) $175.00 Schlage, FSIC, RD/JD (Steel Levers) Schlage, SFIC, GD/BD (Zinc Levers) Falcon, KIL, LD FA7 (7-PIN) (Steel Levers) - (Except ATH, 8AT Lever Style) Corbin Russwin, FSIC, JD CO6 (6-PIN) (Steel Levers) Corbin Russwin, FSIC, JD CO7 (7-PIN) (Steel Levers) - (Except ATH, 8AT Lever Style) Sargent, KIL, LD SAR (6-PIN) (Steel Levers) Sargent, FSIC, JD SAR (6-PIN) (Steel Levers) Medeco, FSIC, JD MED (6-PIN) $345.00 Yale, FSIC, JD YA6 (6-PIN) (Steel Levers) Yale, FSIC, JD YA7 (7-PIN) Exterior Spring Cage & Tailpiece Kit (for Schlage), 10-Piece Bulk Pack - (Select by Chassis, Cylinder OEM, Cylinder Type, Cylinder Detail) Cylindrical 47259238 23593270 Schlage, KIL, PD/LD $712.00 47259239 23593288 Schlage, FSIC, RD/JD $712.00 23593304 Schlage, SFIC, GD/BD $712.00 Mortise 47259238 23593346 Schlage, KIL, PD/LD $712.00 47259239 23593353 Schlage, FSIC, RD/JD $712.00 23593304 Schlage, SFIC, GD/BD $712.00 Exit 23593271 Schlage, KIL, PD/LD $1,584.00 47259250 23593272 Schlage, FSIC, RD/JD $2,366.00 ^23593437 Schlage, SFIC, GD/BD $1,270.00 ^23593510

	New Part Number Original Part Number	Description	List Price
		Exterior Spring Cage & Tailpiece Kit (for Non-Schlage), Single Piece -
		(Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail)
Cylindrical
47259244	23845985	Falcon, KIL, LD FA7 (7-PIN)	$85.90
47259242	23593320	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$373.00
	23990666	Corbin Russwin, FSIC, JD CO7 (7-PIN)
47259241	23593312	Sargent, KIL, LD SAR (6-PIN)	$348.00
47259242	23593320	Sargent, FSIC, JD SAR (6-PIN) Medeco, FSIC, JD MED (6-PIN)	$373.00
47259245	24281792	Yale, FSIC, JD YA6 (6-PIN)	$392.00
47259243	23593395	Yale, FSIC, JD YA7 (7-PIN)	$392.00
47259246 Mortise	24281826		$343.00
47259244	23845923	Falcon, KIL, LD FA7 (7-PIN)	$85.90
	23593387	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$373.00
47259242	23988041	Corbin Russwin, FSIC, JD CO7 (7-PIN)
47259241	23593379	Sargent, KIL, LD SAR (6-PIN)	$348.00
47259242	23593387	Sargent, FSIC, JD SAR (6-PIN)	$373.00
47259245	24281792	Medeco, FSIC, JD MED (6-PIN)	$392.00
47259243	23593395	Yale, FSIC, JD YA6 (6-PIN)	$392.00
47259246	24281826	Yale, FSIC, JD YA7 (7-PIN)	$343.00
Exit
47259254	23810872	Falcon, KIL, LD FA7 (7-PIN)	$90.70
	23593274	Corbin Russwin, FSIC, JD CO6 (6-PIN)
47259252	23988025	Corbin Russwin, FSIC, JD CO7 (7-PIN) - (Except ATH, 8AT Lever Styles)	$373.00
47259251	23593273	Sargent, KIL, LD SAR (6-PIN)	$348.00
47259252	23593274	Sargent, FSIC, JD SAR (6-PIN)	$373.00
47259255	24289936	Medeco, FSIC, JD MED (6-PIN)	$379.00
		Yale, FSIC, JD YA6 (6-PIN)
47259253	23593275		$379.00
47259257	24289944	Yale, FSIC, JD YA7 (7-PIN)
			$324.00
		Tailpiece - (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail)
	C604-243	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)
	C603-524	Schlage, KIL, PD/LD - (Classic Cylinders)
	23446339	Schlage, FSIC, JD/RD/TD
	23779820	Falcon, KIL, LD FA7 (7-PIN)
	46929456	Universal, SFIC, BD/BDC
	23433634	Corbin Russwin, FSIC, JD CO6 (6-PIN)
	23854516	Corbin Russwin, FSIC, JD CO7 (7-PIN)
	23433626	Sargent, KIL, LD SAR (6-PIN) - (Compatible with 10L and 11L)
Cylindrical 47258186 23446339 47258182 47258187 47258180 47258179 47258180	23433634	Sargent, FSIC, JD SAR (6-PIN)
	23810898	Medeco, FSIC, JD MED (6-PIN)
	23760366	Yale, FSIC, JD YA6 (6-PIN) - (Compatible with Medeco 31)
	23929722	Yale, FSIC, JD YA7 (7-PIN)
	23446347	Universal, SFIC, GD/HD
	new	Corbin Russwin, KIL LD CO6
	23538077	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)
	23538085	Schlage, KIL, PD/LD - (Classic Cylinders)
	23446339	Schlage, FSIC, JD/RD/TD
	23779820	Falcon, KIL, LD FA7 (7-PIN)
	46929456	Universal, SFIC, BD/BDC
	23443435	Corbin Russwin, FSIC, JD CO6 (6-PIN)
	23854516	Corbin Russwin, FSIC, JD CO7 (7-PIN)
	23443427	Sargent, KIL, LD SAR (6-PIN) - (Compatible with 10L and 11L)
47258183 47258181 47258184 23446347 47258185 Mortise 47258186 23446339 47258182 47258187 47258180 47258179 47258180	23443435	Sargent, FSIC, JD SAR (6-PIN)
	23810898	Medeco, FSIC, JD MED (6-PIN)
	23760366	Yale, FSIC, JD YA6 (6-PIN) - (Compatible with Medeco 31)
47258183 47258181		Yale, FSIC, JD YA7 (7-PIN)
47258184 23446347	23929722 23446347	Universal, SFIC, GD/HD	$2.00* $5.70 $24.80 $16.10 $38.20 $5.90 $38.20 $89.30 $48.80 $33.00 $14.10 $15.00 $2.00* $5.70 $24.80 $16.10 $38.20 $5.90 $38.20 $89.30 $48.80 $33.00 $14.10

^* This part is shared with Schlage mechanical and defaults to the Schlage mechanical discount.

New Part Number	Original Part Number	Description	List Price
		Tailpiece (for cylinder) - (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail) - (continued)
Exit
	23538077	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)
47258186	23538085	Schlage, KIL, PD/LD - (Classic Cylinders)	$2.00*
23446339	23446339	Schlage, FSIC, JD/RD/TD	$5.70
47258182	23779820	Falcon, KIL, LD FA7 (7-PIN)	$24.80
47258187	46929456	Universal, SFIC, BD/ BDC	$16.10
23446347	N523-091	Universal, SFIC, GD/HD	$14.10
	23443435	Corbin Russwin, FSIC, JD CO6 (6-PIN)
47258180	23854516	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$38.20
47258179	23443427	Sargent, KIL, LD SAR (6-PIN)	$5.90
47258180	23443435	Sargent, FSIC, JD SAR (6-PIN)	$38.20
47258183	23810898	Medeco, FSIC, JD MED (6-PIN)	$89.30
47258181	23760366	Yale, FSIC, JD YA6 (6-PIN) - (Compatible with Medeco 31)	$48.80
47258184	23929722	Yale, FSIC, JD YA7 (7-PIN)	$33.00
23446347	23446347	Universal, SFIC, GD/HD	$16.10
47258187	09-774	Universal, SFIC, BD/BDC	$14.10
47258185	new	Corbin Russwin, KIL LD CO6	$15.00
	Tailpiece Kit - (for Exterior Escutcheon into Exit Device)
Exit Trim
	46929303	Tailpiece Kit (Includes Tailpiece, Tailpiece Guide, Pine Tree Clip)	$20.50
		Tailpiece Kit, 10-Piece Bulk Pack - (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail)
Cylindrical
09-418	09-418	Schlage, KIL, PD/LD - (Classic Cylinders)	$13.70
09-417	09-417	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)	$13.70
23790611	23790611	Falcon, KIL, PD/LD	$23.30
Mortise
09-418	46928768	Schlage, KIL, PD/LD - (Classic Cylinders)	$13.70
09-417	46928776	Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders)	$13.70

23790611 new Falcon, KIL, PD/LD $23.30

09-418 46928768 Schlage, KIL, PD/LD - (Classic Cylinders) $13.70 09-417 46928776 Schlage, KIL, PD/LD - (Everest/Primus/Modular Cylinders) $13.70 23790611 new Falcon, KIL, PD/LD $23.30

Exit

^* This part is shared with Schlage mechanical and defaults to the Schlage mechanical discount.

New Part Number	Original Part Number	Description	List Price
		Cylinder - (Select by Chassis Type, Cylinder Mechanism, Cylinder Type, Cylinder Detail)
Cylindrical
	23-013	Classic, KIL, PD - (Only ATH, 8AT Lever Styles)	$65.00*
	23-030	Classic, FSIC, RD - (Open)	$74.00*
	23-030	Classic, FSIC, AD - (Rescricted)	$92.00*
	20-750	Primus, KIL, PD - (Only ATH, 8AT Lever Styles)	$145.00*
	20-740	Primus, FSIC, RD	$157.00*
	20-550	Primus UL, KIL, PD - (Only ATH, 8AT Lever Styles)	$179.00*
	20-750-XP	Primus XP, KIL, PD - (Only ATH, 8AT Lever Styles)	$145.00*
	20-740-XP	Primus XP, FSIC, RD	$157.00*
	20-550-XP	Primus UL XP, KIL, PD - (Only ATH, 8AT Lever Styles)	$179.00*
Mortise
	23-118	Classic, KIL, PD - (Except ATH, 8AT Lever Styles)	$65.00*
	23-118	Classic, KIL, PD - (Except ATH, 8AT Lever Styles) (Restricted)	$83.00*
	23-030	Classic, FSIC, RD	$74.00*
	20-854	Primus, KIL, PD - (Except ATH, 8AT Lever Styles)	$145.00*
	20-740	Primus, FSIC, RD	$157.00*
	20-554	Primus UL, KIL, PD - (Except ATH, 8AT Lever Styles)	$179.00*
	20-854-XP	Primus XP, KIL, PD - (Except ATH, 8AT Lever Styles)	$145.00*
	20-740-XP	Primus XP, FSIC, RD	$145.00*
	20-554-XP	Primus UL XP, KIL, PD - (Except ATH, 8AT Lever Styles)	$179.00*
Exit
	23-118	Classic, KIL, PD - (Except ATH, 8AT Lever Styles)	$65.00*
	23-118	Classic, KIL, PD - (Except ATH, 8AT Lever Styles) (Restricted)	$83.00*
	23-030	Classic, FSIC, RD	$74.00*
	20-854	Primus, KIL, PD - (Except ATH, 8AT Lever Styles)	$145.00*
	20-750	Primus, KIL, PD - (Only ATH, 8AT Lever Styles)	$145.00*
	20-740	Primus, FSIC, RD	$157.00*
	20-554	Primus UL, KIL, PD - (Except ATH, 8AT Lever Styles)	$179.00*
	20-550	Primus UL, KIL, PD - (Only ATH, 8AT Lever Styles)	$179.00*
	20-854-XP	Primus XP, KIL, PD - (Except ATH, 8AT Lever Styles)	$145.00*
	20-750-XP	Primus XP, KIL, PD - (Only ATH, 8AT Lever Styles)	$145.00*
	20-740-XP	Primus XP, FSIC, RD	$157.00*
	20-554-XP	Primus UL XP, KIL, PD - (Except ATH, 8AT Lever Styles)	$179.00*
	20-550-XP	Primus UL XP, KIL, PD - (Only ATH, 8AT Lever Styles)	$179.00*

Interior Lever (Closed) - (Please specify STYLE and FINISH - Example: 03-030-SPA-626)
03-230	03-030	Inside Lever, Closed - ATH, RHO, SPA, TLR	$140.00

^* This part is shared with Schlage mechanical and defaults to the Schlage mechanical discount.

New Part Number Original Part Number Description List Price Exterior Lever (Less Cylinder) - (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail) - (Please specify STYLE and FINISH - Example: 03-031-SPA-626) Cylindrical 03-231 03-031 Schlage, KIL, PD/LD $140.00 03-232 03-032 Schlage, FSIC, RD/JD $140.00 03-200 03-000 Schlage, SFIC, GD/BD $140.00 03-280 23779739 (RHO) Falcon, KIL, LD FA7 (7-PIN) $148.00 23779762 (SPA) 23779747 (8RO) 23779770 (8SP) 03-266 03-066 Corbin Russwin, FSIC, JD CO6 (6-PIN) $260.00 03-235 23854524 (RHO) Corbin Russwin, FSIC, JD CO7 (7-PIN) $260.00 23854540 (SPA) 23854565 (TLR) 23854532 (8RO) 23854557 (8SP) 23854573 (8TR) 03-244 03-044 Sargent, KIL, LD SAR (6-PIN) $260.00 03-277 03-077 Sargent, FSIC, JD SAR (6-PIN) $260.00 03-237 09-388 Medeco, FSIC, JD MED (6-PIN) $260.00 03-255 09-355 Yale, FSIC, JD YA6 (6-PIN) $260.00 03-236 09-399 Yale, FSIC, JD YA7 (7-PIN) $260.00 03-234 NEW Corbin Russwin, KIL, LD CO6 (6-PIN) $260.00 New Lever Options 47258044 NEW BOARDWALK - Closed $140.00 47258052 NEW BOARDWALK - JD $140.00 47258048 NEW BOARDWALK - PD/LD $140.00 47258040 NEW BOARDWALK - BDC/BD/GD/HD $140.00 47258043 NEW BROADWAY - Closed $140.00 47258051 NEW BROADWAY - JD $140.00 47258047 NEW BROADWAY - PD/LD $140.00 47258039 NEW BROADWAY - BDC/BD/GD/HD $140.00 47258045 NEW LATITUDE - Closed $140.00 47258053 NEW LATITUDE - JD $140.00 47258049 NEW LATITUDE - PD/LD $140.00 47258041 NEW LATITUDE - BDC/BD/GD/HD $140.00 47258046 NEW LONGITUDE - Closed $140.00 47258054 NEW LONGITUDE - JD $140.00 47258050 NEW LONGITUDE - PD/LD $140.00 47258042 NEW LONGITUDE - BDC/BD/GD/HD $140.00 47260554 NEW BOARDWALK (TACTILE) - Closed $187.00 47260546 NEW BOARDWALK (TACTILE) - JD $187.00 47260550 NEW BOARDWALK (TACTILE) - PD/LD $187.00 47260538 NEW BOARDWALK (TACTILE) - BDC/BD/GD/HD $187.00 47260553 NEW BROADWAY (TACTILE) - Closed $187.00 47260545 NEW BROADWAY (TACTILE) - JD $187.00 47260549 NEW BROADWAY (TACTILE) - PD/LD $187.00 47260537 NEW BROADWAY (TACTILE) - BDC/BD/GD/HD $187.00 47260555 NEW LATITUDE (TACTILE) - Closed $187.00 47260547 NEW LATITUDE (TACTILE) - JD $187.00 47260551 NEW LATITUDE (TACTILE) - PD/LD $187.00 47260539 NEW LATITUDE (TACTILE) - BDC/BD/GD/HD $187.00 47260556 NEW LONGITUDE (TACTILE) - Closed $187.00 47260548 NEW LONGITUDE (TACTILE) - JD $187.00 47260552 NEW LONGITUDE (TACTILE) - PD/LD $187.00 47260540 NEW LONGITUDE (TACTILE) - BDC/BD/GD/HD $187.00 Mortise 03-231 09-331 Schlage, KIL, PD/LD $140.00 03-232 09-332 Schlage, FSIC, RD/JD $140.00 03-200 03-000 Schlage, SFIC, GD/BD $140.00 03-280 09-331 Falcon, KIL, LD FA7 (7-PIN) $148.00 03-266 09-366 Corbin Russwin, FSIC, JD CO6 (6-PIN) $260.00 03-235 09-366 Corbin Russwin, FSIC, JD CO7 (7-PIN) $260.00 03-244 09-344 Sargent, KIL, LD SAR (6-PIN) $260.00 03-277 09-377 Sargent, FSIC, JD SAR (6-PIN) $260.00 03-237 09-388 Medeco, FSIC, JD MED (6-PIN) $260.00

New Part Number	Original Part Number	Description	List Price
	Exterior Lever (Less Cylinder) -	(Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail) - (Please specify STYLE and FINISH - Example: 03-031-SPA-626)
Mortise (Continued)
03-255 03-236	09-355 09-399	Yale, FSIC, JD YA6 (6-PIN) Yale, FSIC, JD YA7 (7-PIN)	$260.00 $260.00
03-234	NEW	Corbin Russwin, KIL, LD CO6 (6-PIN)	$260.00
New Lever Options
47258044	NEW	BOARDWALK - Closed	$140.00
47258052	NEW	BOARDWALK - JD	$140.00
47258048	NEW	BOARDWALK - PD/LD	$140.00
47258040	NEW	BOARDWALK - BDC/BD/GD/HD	$140.00
47258043	NEW	BROADWAY - Closed	$140.00
47258051	NEW	BROADWAY - JD	$140.00
47258047	NEW	BROADWAY - PD/LD	$140.00
47258039	NEW	BROADWAY - BDC/BD/GD/HD	$140.00
47258045	NEW	LATITUDE - Closed	$140.00
47258053	NEW	LATITUDE - JD	$140.00
47258049 47258041	NEW NEW	LATITUDE - PD/LD LATITUDE - BDC/BD/GD/HD	$140.00
47258046	NEW	LONGITUDE - Closed	$140.00 $140.00
47258054	NEW	LONGITUDE - JD	$140.00
47258050	NEW	LONGITUDE - PD/LD	$140.00
47258042	NEW	LONGITUDE - BDC/BD/GD/HD	$140.00
47260554	NEW	BOARDWALK (TACTILE) - Closed	$187.00
47260546	NEW	BOARDWALK (TACTILE) - JD	$187.00
47260550	NEW	BOARDWALK (TACTILE) - PD/LD	$187.00
47260538	NEW	BOARDWALK (TACTILE) - BDC/BD/GD/HD	$187.00
47260553	NEW	BROADWAY (TACTILE) - Closed	$187.00
47260545	NEW	BROADWAY (TACTILE) - JD	$187.00
47260549	NEW	BROADWAY (TACTILE) - PD/LD	$187.00
47260537	NEW	BROADWAY (TACTILE) - BDC/BD/GD/HD	$187.00
47260555	NEW	LATITUDE (TACTILE) - Closed	$187.00
47260547	NEW	LATITUDE (TACTILE) - JD LATITUDE (TACTILE) - PD/LD	$187.00
47260551 47260539	NEW NEW	LATITUDE (TACTILE) - BDC/BD/GD/HD	$187.00 $187.00
47260556	NEW	LONGITUDE (TACTILE) - Closed	$187.00
47260548	NEW	LONGITUDE (TACTILE) - JD	$187.00
47260552	NEW	LONGITUDE (TACTILE) - PD/LD	$187.00
47260540	NEW	LONGITUDE (TACTILE) - BDC/BD/GD/HD	$187.00
Exit
03-231	03-331	Schlage, KIL, PD/LD	$140.00
03-232	03-332	Schlage, FSIC, RD/JD	$140.00
03-200	03-300	Schlage, SFIC, GD/BD	$140.00
03-280	03-331	Falcon, KIL, LD FA7 (7-PIN)	$148.00
03-266	03-366	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$260.00
03-235	03-366	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$260.00
03-244	03-344	Sargent, KIL, LD SAR (6-PIN)	$260.00
03-277	03-377	Sargent, FSIC, JD SAR (6-PIN)	$260.00
03-237	03-388	Medeco, FSIC, JD MED (6-PIN)	$260.00
03-255	03-355	Yale, FSIC, JD YA6 (6-PIN)	$260.00
03-236	03-399	Yale, FSIC, JD YA7 (7-PIN)	$260.00
03-234		Corbin Russwin, KIL, LD CO6 (6-PIN)	$260.00
New Lever Options
47258044	NEW	BOARDWALK - Closed	$140.00
		BOARDWALK - JD
47258052	NEW		$140.00
47258048	NEW	BOARDWALK - PD/LD	$140.00
47258040	NEW	BOARDWALK - BDC/BD/GD/HD	$140.00
47258043	NEW	BROADWAY - Closed	$140.00
47258051	NEW	BROADWAY - JD	$140.00
47258047	NEW	BROADWAY - PD/LD	$140.00
47258039	NEW	BROADWAY - BDC/BD/GD/HD	$140.00
47258045	NEW	LATITUDE - Closed	$140.00
47258053	NEW	LATITUDE - JD	$140.00

New Part Number Original Part Number Description List Price Exterior Lever (Less Cylinder) - (Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail) - (Please specify STYLE and FINISH - Example: 03-031-SPA-626) New Lever Options (Continued) 47258049 NEW LATITUDE - PD/LD $140.00 47258041 NEW LATITUDE - BDC/BD/GD/HD $140.00 47258046 NEW LONGITUDE - Closed $140.00 47258054 NEW LONGITUDE - JD $140.00 47258050 NEW LONGITUDE - PD/LD $140.00 47258042 NEW LONGITUDE - BDC/BD/GD/HD $140.00 47260554 NEW BOARDWALK (TACTILE) - Closed $187.00 47260546 NEW BOARDWALK (TACTILE) - JD $187.00 47260550 NEW BOARDWALK (TACTILE) - PD/LD $187.00 47260538 NEW BOARDWALK (TACTILE) - BDC/BD/GD/HD $187.00 47260553 NEW BROADWAY (TACTILE) - Closed $187.00 47260545 NEW BROADWAY (TACTILE) - JD $187.00 47260549 NEW BROADWAY (TACTILE) - PD/LD $187.00 47260537 NEW BROADWAY (TACTILE) - BDC/BD/GD/HD $187.00 47260555 NEW LATITUDE (TACTILE) - Closed $187.00 47260547 NEW LATITUDE (TACTILE) - JD $187.00 47260551 NEW LATITUDE (TACTILE) - PD/LD $187.00 47260539 NEW LATITUDE (TACTILE) - BDC/BD/GD/HD $187.00 47260556 NEW LONGITUDE (TACTILE) - Closed $187.00 47260548 NEW LONGITUDE (TACTILE) - JD $187.00 47260552 NEW LONGITUDE (TACTILE) - PD/LD $187.00 47260540 NEW LONGITUDE (TACTILE) - BDC/BD/GD/HD $187.00

Pricing/product description subject to change without notice.

*This part is shared with Schlage mechanical and defaults to the Schlage mechanical discount.

New Part Number	Original Part Number	Description	List Price
		Exterior Lever (Less Cylinder), 10-Piece Bulk Pack -
		(Select by Chassis Type, Cylinder OEM, Cylinder Type, Cylinder Detail) - (Please specify STYLE and FINISH - Example: K103-031-SPA-626)
Cylindrical
K103-681	K103-031	Schlage, KIL, PD/LD	$1,075.00*
K103-682	K103-032	Schlage, FSIC, RD/JD	$1,281.00*
K103-680	K103-000	Schlage, SFIC, GD/BD	$1,281.00*
K103-684	K103-066	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$2,055.00*
K103-683	K103-044	Sargent, KIL, LD SAR (6-PIN)	$2,553.00*
K103-685	K103-077	Sargent, FSIC, JD SAR (6-PIN)	$2,055.00*
K103-687	K109-388	Medeco, FSIC, JD MED (6-PIN)	$2,556.00*
K103-686	K103-055	Yale, FSIC, JD YA6 (6-PIN)	$2,556.00*
K103-688	K109-399	Yale, FSIC, JD YA7 (7-PIN)	$2,556.00*
K103-689	NEW	Falcon, KIL, LD FA7 (7-PIN)	$2,055.00
K103-690	23991086 (RHO)	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$2,055.00
	23991094 (SPA)
	23991102 (TLR)
	23991110 (8RO)
	23991128 (8SP)
	23991136 (8TR)
Mortise
K103-681	K109-331	Schlage, KIL, PD/LD	$1,075.00*
K103-682	K109-332	Schlage, FSIC, RD/JD	$1,281.00*
K103-680	K103-000	Schlage, SFIC, GD/BD	$1,281.00*
K103-684	K109-366	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$1,995.00*
K103-683	K109-344	Sargent, KIL, LD SAR (6-PIN)	$2,553.00*
K103-685	K109-377	Sargent, FSIC, JD SAR (6-PIN)	$2,055.00*
		Medeco, FSIC, JD MED (6-PIN)
K103-687	K109-388		$2,556.00*
K103-686	K109-355	Yale, FSIC, JD YA6 (6-PIN)	$2,556.00*
K103-688	K109-399	Yale, FSIC, JD YA7 (7-PIN)	$2,556.00*
K103-689	K109-331	Falcon, KIL, LD FA7 (7-PIN)	$2,055.00
K103-690	K109-366	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$2,055.00
Exit
K103-681	K103-331	Schlage, KIL, PD/LD	$1,075.00*
K103-682	K103-332	Schlage, FSIC, RD/JD	$1,281.00*
K103-680	K103-000	Schlage, SFIC, GD/BD	$1,281.00*
K103-689	K103-331	Falcon, KIL, LD FA7 (7-PIN)	$1,995.00
K103-684	K103-366	Corbin Russwin, FSIC, JD CO6 (6-PIN)	$2,553.00
K103-690	K103-366	Corbin Russwin, FSIC, JD CO7 (7-PIN)	$2,055.00
K103-683	K103-344	Sargent, KIL, LD SAR (6-PIN)	$2,556.00*
K103-685	K103-377	Sargent, FSIC, JD SAR (6-PIN)	$2,556.00*
K103-687	K103-388	Medeco, FSIC, JD MED (6-PIN)	$2,556.00
K103-686	K103-355	Yale, FSIC, JD YA6 (6-PIN)	$2,055.00*
K103-688	K103-399	Yale, FSIC, JD YA7 (7-PIN)	$2,055.00*
Steel Lever Kits & Parts
Obsolete	24274730-AD	Steel Lever Conversion Kit - (Includes Escutcheon Assembly, Spring Cage Assembly,	Obsolete
Obsolete		Lever Rotation Stops, Screws, Instructions) - Please specify CLASS, READER, FINISH)
Obsolete	47250325	Stainless Steel Set Screw for outside Steel Levers (Package of 20)	Obsolete

^* This part is shared with Schlage mechanical and defaults to the Schlage mechanical discount.

Part Number	Description	List Price
	Interior Rose - (Please specify FINISH - Example: 03-042-RHO-626)
03-042-RHO-626	Interior Rose - (626 Finish)	$125.00
03-042-RHO	Interior Rose - (605/606/612/619/625/643e Finishes)	$128.00
03-042-RHO-613	Interior Rose - (613 Finish)	$133.00
	Lock Retractor - (Select by Chassis Type, Chassis Thickness)
Cylindrical
46928800	Retractor	$343.00
Mortise
46928818	1-1/16" Narrow - (Door Thicknesses 1-3/8" to 1-5/8")	$441.00
46928826	1-1/4" Standard - (Door Thicknesses 1-3/4" to 2-3/4")	$441.00
Mortise Deadbolt
46928834	1-1/16" Narrow - (Door Thicknesses 1-3/8" to 1-5/8")	$558.00
46928842	1-1/4" Standard - (Door Thicknesses 1-3/4" to 2-3/4")	$558.00
	Spindle & Hub Kit - (Select by Chassis Type)
Exit
46929295	Exit Spindle & Hub Kit (Includes Spindle, Spindle Cover, Spindle Hub, Tailpiece, Twisted Tailpiece, Tailpiece Spring, Pine Tree Clip, Screw)	$42.80
Spindle Spring
47256978	Inside Spindle Spring (25 Pack)	$79.30
	Hub, 10-Piece Bulk Pack - (Select by Chassis Type)
Cylindrical
23599228	Hub (10-Piece Bulk Pack)	$157.00
Mortise
23599228	Hub (10-Piece Bulk Pack)	$157.00
	Deadbolt Thumb Turn Assembly (with E-Clip) - (Please specify FINISH - Example: 46929113-626)
46929113	Deadbolt Thumb Turn Assembly (with E-Clip)	$34.40
	Strike Plate (Select by Chassis Type) - (Please specify FINISH-SHAPE and LIP - Example: 10-025-0118-0626)
Cylindrical
10-025-1316	ANSI, no box, 1-1/4" x 4-7/8", Standard with 1-3/16" Lip	$15.70*
10-025-138	ANSI, no box, 1-1/4" x 4-7/8", Standard with 1-3/8" Lip	$45.00*
10-025-112	ANSI, no box, 1-1/4" x 4-7/8", Standard with 1-1/2" Lip	$45.00*
10-013-118	Square corner, T-strike, box, 1-1/8" x 2-3/4" with 1-1/8" Lip	$12.20*
10-013 -112	Square corner, T-strike, box, 1-1/8" x 2-3/4" with 1-1/2" Lip	$17.00*
10-016	Square corner, T-strike, deep box, 1-1/8" x 2-3/4" with 1-1/8" Lip Use with Fire door latch	$16.20*
K510-066 Mortise Deadbolt	Box ANSI strike	$7.40*
10-072-1316	1-1/4" x 4-7/8" Square corner, box, standard with Lip at 1-3/16", 1", 1-1/2",	$22.90*
10-072-xx	1-1/4" x 4-7/8" Square corner, box, specify lip length (xx) as 1"or 1-1/2"	$22.90*
10-072-xx	1-1/4" x 4-7/8" Square corner, box, specify lip length (xx) as 1", 1-3/4", or 2"	$59.20*
10-075	1/2" Rabbeted	$152.00*
37-015	Strike frame reinforcer	$25.80*
	Mortise Armor Front - (Select by Width, Door Thickness) - (Please specify FINISH: 09-663-626)
09-663	Armor, 1-1/4" Wide Square Corner, Latch x Auxiliary latch (for door range 1-3/4" to 2-3/4")	$38.10*
09-666	Armor, 1-1/4" Wide Square Corner, Latch x Auxiliary latch x Deadbolt (for door range 1-3/4" to 2-3/4")	$38.10*
09-669	Armor, 1-1/16" Wide Square Corner, Latch x Auxiliary latch (for door range 1-3/8" to 1-5/8")
09-672	Armor, 1-1/16" Wide Square Corner, Latch x Auxiliary latch x Deadbolt	$38.10*
	(for door range 1-3/8" to 1-5/8")

^* This part is shared with Schlage mechanical and defaults to the Schlage mechanical discount.

Part Number	Description	List Price
	Door Thickness Kit - (Select by Chassis Type, Door Thickness) - (Please specify Door Thickness - Example: 23599376-134 for 1-3/4")
Cylindrical
23599376-138	1-3/8" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$168.00
23599376-112	1-1/2" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$119.00
23599376-158	1-5/8" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$85.70
23599376-XXX	Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs) Must specify door thickness: 1-3/4" to 2-3/4" in 1/8" increments (EXAMPLE: 23599376-134 for a 1-3/4" door)	$51.50
Mortise
23599384-138	1-3/8" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$168.00
23599384-112	1-1/2" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$119.00
23599384-158	1-5/8" Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs)	$85.70
23599384-XXX	Door Thickness Kit (Includes Baseplate Screws, Reader Screws, Spindles, Spring, Pin Wrench, Fire Plate Screw, Shim Plates, Standoffs) Must specify door thickness: 1-3/4" to 2-3/4" in 1/8" increments (EXAMPLE: 23599384-134 for a 1-3/4" door)	$51.50

	Decorative Plate - (Select by Size) - (Please specify FINISH - Example: 23760283-626)
23631823	1.5" x 3.25" x .105" Decorative Plate (with Screws) - (Exit Trim)	$36.40
23760267	1.7" x 3.5" x .075" Decorative Plate (with Screws)	$26.70
23760283	3.2" x 3.5" x .075" Decorative Plate (with Screws)	$41.30
23760317	6.0" x 3.5" x .075" Decorative Plate (with Screws)	$62.90
23760325	6.6" x 3.5" x .075" Decorative Plate (with Screws)	$62.90
23760309	8.0" x 3.5" x .075" Decorative Plate (with Screws)	$64.30
23760291	8.0" x 3.5" x .075" Decorative Plate (with Screws, Welded Standoffs)	$87.00
23760259*	10.5" x 3.5" x .075" Decorative Plate (no Screws necessary) - (Under Lock)	$83.40
23760275*	12.0" x 3.5" x .075" Decorative Plate (no Screws necessary) - (Under Lock)	$82.60

^* Please consider overall Door Thickness when ordering

Note: Single Decorative Plate. Interior and Exterior Decorative Plates may be required.

Note: Decorative Plates may have multiple applications. Please see AD-Series Retrofit Template Overlay guide at www.schlage.com/support for more information Available Finishes: 626 Satin Chrome Standard. Please consult Customer Care for 605 Bright Brass or 643E Aged Bronze.

Part Number	Description	List Price
	Interior Shim Plate - (Please specify FINISH - Example: 23599368-626)
23599368	Interior Shim Plate (with Interior Spring Cage Spacer) - (Device is 0.063" thick)	$24.70
Exterior Shim Plate
23458599	Exterior Shim Plate - (Device is 0.063" thick)	$23.20
Door Position Switch
46929121	Door Position Switch	$32.50
Cylindrical	Battery Holder & Cover Kit - (Select by Chassis Type, Battery Capacity) - (Please specify FINISH - Example: 4B-CM-626)
4B-CM (23599202)	4AA Battery Holder & Cover Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, (2) Battery Strap Screws, 4AA Battery Cover, Cover Screw, Torx Cover Screw)	$57.70
Mortise
4B-CM (23599202)	4AA Battery Holder & Cover Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, (2) Battery Strap Screws, 4AA Battery Cover, Cover Screw, Torx Cover Screw)	$57.70
Exit
4B-E (23599285)	4AA Battery Holder & Cover Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, (2) Battery Strap Screws, 4AA Battery Cover, Cover Screw, Torx Cover Screw)	$57.70
Battery Holder Kit
46929063	4AA Battery Holder Kit (Includes 4AA Battery Holder with Cable, 4AA Battery Strap, Battery Strap Screws)	$24.70
Battery - (Select by Battery Type)
F206-488	(4) AA Batteries	$11.00
	Torx Tamper Screw Pack - (Select by Chassis Type)
Cylindrical
23631765 Mortise	Torx Tamper Screw Pack	$41.30
23631781	Torx Tamper Screw Pack	$41.30
Exit
23631799	Torx Tamper Screw Pack	$33.00
Request-to-Exit Switch Kit
RX-LC	Von Duprin RX-LC (also called SI-LC or Von Duprin part number 050281)	$328.00
	Please see Falcon Price Book for Falcon AD part number 650359
Wireless Parts
47250326	Terminal Block Kit – (Includes one power connector and ten I/O connectors) supports CT5000	$45.70
Cables 23518392	Storeroom (70) Thru-Door Cable	$19.00
23518384	Privacy (40) & Office (50) Thru-Door Cable	$30.70
47269270	(WARM) KEYPAD, MSK, CO, KIT	$38.70
47269272	(WARM) KEYPAD, CORE, KEYPAD + PROX, CO, KIT	$38.70
47269170	INSIDE PUSH BUTTON, AD/CO	$59.80
47267321	CO BATTERY CABLE (5 Pack)	$38.70

ELECTROMAGNETIC LOCKS - TABLE OF CONTENTS
M490 MAX SECURITY	244
M450 HIGH SECURITY	245
M420 TRAFFIC CONTROL SERIES	246
M490DE DEYLAYED EGRESS SERIES	247
M390RFK RETROFIT LOCK	248
FILLER PLATES AND ANGLE BRACKETS	249
ELECTROMAGNETIC SPECIALTY LOCKS M490G Gate Lock 320M MiniLine Magnet Lock	250 250 250
GF3000 SHEAR LOCK MORTISE SERIES	251
GF3000 SHEAR LOCK SURFACE SERIES	252
ELECTROMAGNETIC LOCK PARTS	253

CONTACT INFORMATION FOR ELECTROMAGNETIC LOCKS

Payment Address: Schlage Electronic Security 15934 Collections Center Drive Chicago, IL 60693

877-671-7011
Customer Service:	Technical Support:
Order Status, Credit Returns of Non-Defective Products, General Sales Questions	Technical Questions/Issues, Returns of Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:

For Electromagnetic Lock Warranty Information please see page 10.

Order_Entry_Schlage_Commercial@allegion.com

Pricing/product description subject to change without notice.

Electronic_Lock_TechProdSupport@allegion.com

M490 Max Security Series with Limited Lifetime Warranty on Magnetic Coil Assembly

Standard Features:

• ANSI/BHMA 156.23 Grade 1
• UL 1034 listed for burglary resistance
• UL 10C listed; cUL
• UL 294 listed for access control system units
• CSFM California State Fire Marshal listed

1. Select Model	M490	M492
Electromagnetic Lock Automatic Voltage Selection	$719.00	$1,508.00

Electromagnetic Lock	$932.00	$1,931.00
Automatic Voltage Selection
Door Status Monitor (DSM), Magnetic Bond Sensor (MBS)
Relocking Time Delay (RTD)

2. Select Options and Accessories M490/M490P M492/M492P

Anti-Tamper Switch (ATS), MBS indicator (LED) for M490P/M492P only	450/490-ATS/LED	$80.10	450/490-ATS/LED-2	$162.00
Herculite Door Bracket	HDB490	$362.00	HDB490-2	$727.00
Top Jamb (inswinging doors)	TJ490	$175.00	TJ492	$352.00
M452/M492 Connector Kit. (used to convert two (2) single mag locks to a double)		DBK450/490		$66.80

Specifications	M490/M490P	M492/M492P
Holding Force	1500 lbs	1500 lbs per door leaf
Input Voltage	12/24 VDC	12/24 VDC
Current Draw Automatic Dual Voltage 12/24 VDC	.65A @ 12 VDC .35A @ 24 VDC	1.3A @ 12 VDC .7A @ 24 VDC
Height	3"	3"
Length	12-1/2"	25-1/16"
Width	3-3/4"	3-3/4"
Weight (Approximate)	14 lbs	28 lbs

M450 High Security Series with Limited Lifetime Warranty on Magnetic Coil Assembly

Standard Features:

• ANSI/BHMA 156.23 Grade 1
• UL 1034 listed for burglary resistance
• UL 10C listed; cUL
• UL 294 listed for access control system units
• CSFM California State Fire Marshal listed

1. Select Model	M450	M452
Electromagnetic Lock	$658.00	$1,379.00
Automatic Voltage Selection

Electromagnetic Lock	$874.00	$1,815.00
Automatic Voltage Selection
Door Status Monitor (DSM), Magnetic Bond Sensor (MBS)
Relocking Time Delay (RTD)

2. Select Options and Accessories		M450/M450P M452/M452P
Anti-Tamper Switch (ATS), MBS indicator (LED) for M450P/M452P only	450/490-ATS/LED	$80.30	450/490-ATS/LED-2	$162.00
Herculite Door Bracket	HDB450	$362.00	HDB450-2	$727.00
Top Jamb (inswinging doors)	TJ450	$175.00	TJ452	$352.00
M452/M492 Connector Kit. (used to convert two (2) single mag locks to a double)		DBK450/490		$66.80

Specifications	M450/M450P	M452/M452P
Holding Force	1000 lbs	1000 lbs per door leaf
Input Voltage	12/24 VDC	12/24 VDC
Current Draw Automatic Dual Voltage 12/24 VDC	.75A @ 12 VDC .38A @ 24 VDC	1.5A @ 12 VDC 0.75A @ 24 VDC
Height	3"	3"
Length	10-1/4"	20-9/16"
Width	1-3/4"	1-3/4"
Weight (Approximate)	10 lbs	20 lbs

M420 Traffic Control Series with Limited Lifetime Warranty on Magnetic Coil Assembly

Standard Features:

• ANSI/BHMA 156.23 Grade 1
• UL 1034 listed for burglary resistance
• UL 10C listed; cUL
• UL 294 listed for access control system units
• CSFM California State Fire Marshal listed

1. Select Model	M420	M422
Electromagnetic Lock	$575.00	$1,216.00
Automatic Voltage Selection

	M420P	M422P
Electromagnetic Lock	$792.00	$1,627.00
Automatic Voltage Selection
Door Status Monitor (DSM), Magnetic Bond Sensor (MBS)
Relocking Time Delay (RTD)

2. Select Options and Accessories		M420/M420P		M422/M422P
Anti-Tamper Switch (ATS), MBS indicator (LED) for M420P/M422P only	420-ATS/LED	$80.30	420-ATS/LED-2	$162.00
Herculite Door Bracket	HDB420	$362.00	HDB420-2	$772.00
Top Jamb (inswinging doors)	TJ420	$175.00	TJ422	$352.00
M422 Connector Kit. (used to convert two (2) single mag locks to a double)		DBK420		$66.80

Specifications	M420/M420P	M422/M422P
Holding Force	500 lbs	500 lbs per door leaf
Input Voltage	12/24 VDC	12/24 VDC
Current Draw Automatic Dual Voltage 12/24 VDC	.75A @ 12 VDC .38A @ 24 VDC	1.5A @ 12 VDC .76A @ 24 VDC
Height	2-1/2"	2-1/2"
Length	9"	18-1/16"
Width	1-3/8"	1-3/8"
Weight (Approximate)	6 lbs	12 lbs

Patent #'s 6,053,546/5,479,151/5,133,581

M490DE Delayed Egress Series

with Limited Lifetime Warranty on Magnetic Coil Assembly

Standard Features

• Delayed egress with plunger switch and external switch input
• Designed to meet NFPA 101 Life Safety Code
• Automatic voltage selection
• UL294 Special locking arrangement including BOCA*
• ANSI/BHMA 156.24
• UL 10C listed; cUL
• CSFM California State Fire Marshal listed

All 30 second delay requests, require a letter from the local fire marshal for approval or local jurisdiction.

• Authorized release input
• On-board audible alarm
• On-board bi-color LED
• Fire alarm terminals

Factory Set Delay

1. Select Model	15 sec	30 sec		Single Lock		Double Lock
Electromagnetic Delayed Egress Lock (DE)	X		M490DE	$1,547.00	M490DE-2	$3,028.00
		X	M490DE-30S	$1,600.00	M490DE-2-30S	$3,081.00
Delayed Egress Plus (DEP)	X		M490DEP	$2,322.00	M490DEP-2	$4,488.00
Delayed Egress Plus (DEP)		X	M490DEP-30S	$2,374.00	M490DEP-2-30S	$4,952.00
Delayed Egress Plus, BOCA (DEP-BC)	X		M490DEP-BC	$2,322.00	M490DEP-2-BC	$4,488.00
Delayed Egress Plus, BOCA (DEP-BC)		X	M490DEP-BC30S	$2,374.00	M490DEP-2- BC30S	$4,540.00

^* Plus (P): Door Status Monitor (DSM), Magnetic Bond Sensor (MBS), Relocking Time Delay (RTD)

^* All 30 second delay requests (product/ PCB kits), require a letter from the local fire marshal for approval or local jurisdiction.

2. Select Options and Accessories	M490DE / M490DEP		M490DE-2 / M490DEP-2
Herculite (Glass) Door Bracket	HDB490	$362.00	HDB490-2	$727.00

Specifications	M490DE/M490DEP	M490DE-2/M490DEP-2
Holding Force	1300 lbs	1300 lbs per door leaf
Input Voltage	12/24 VDC	12/24 VDC
Current Draw Automatic Dual Voltage 12/24 VDC	.75A @ 12 VDC .45A @ 24 VDC	1.25A @ 12 VDC 0.76A @ 24 VDC
Height	3"	3"
Length	12-1/2"	25-1/16"
Width	3-1/16"	3-1/16"
Weight (Approximate)	16 lbs	32 lbs

^* For BOCA option please contact Customer Care, only available on Plus (P) models

^* PCB Kits (:15, :30 second) are sold separate for in-field updates. See parts section for M490DE, M490DEP and M490DEP BOCA kits.

Patent # 5,133,581

M390RFK Retrofit Lock

with Limited Lifetime Warranty on Magnetic Coil Assembly

Designed to retrofit Locknetics 390+ without any additional prep.

Standard Features:

• ANSI/BHMA 156.23 Grade 1
• UL 294 listed for access control systems units
• UL 10C listed; cUL
• CSFM California State Fire Marshal listed

1. Select Model M390RFK

Electromagnetic Lock	$932.00
Automatic Voltage Selection, Magnetic Bond Sensor, Door Status Monitor, 628 satin aluminum finish

2. Specifications	M390RFK
Holding Force	1500 lbs
Input Voltage	12/24 VDC
Current Draw Automatic Dual Voltage 12/24 VDC	.65A @ 12 VDC .45A @ 24 VDC
Height	2-7/8"
Length	10-1/2"
Width	1-5/8"
Weight (Approximate)	12.4 lbs

Filler Plates and Angle Brackets

Angle Brackets		M420		M450
Length		9"		10-1/4"
Width x Height	Bracket No.	Price Ea.	Bracket No.	Price Ea.
1" x 1"	4201A	$87.00	4501A	$87.00
1-1/2" x 1"	4202A	$93.00	4502A	$93.00
1-1/2" x 1-1/2"	4203A	$98.00	4503A	$98.00
1-1/2" x 2"	4204A	$128.00	4504A	$128.00
1-1/2" x 2-1/2"	4205A	$155.00	4505A	$155.00

Note: Overall lengths are cut to the appropriate magnet size.

Angle Brackets	M490/M490DE		M490G Corrosion Resistant
Length	12-1/2"		11"
Width x Height	Bracket No.	Price Ea.	Bracket No.	Price Ea.
1" x 1"	4901A	$87.00	49G1A	$87.00
1-1/2" x 1"	4902A	$93.00	49G2A	$93.00
1-1/2" x 1-1/2"	4903A	$98.00	49G3A	$98.00
1-1/2" x 2"	4904A	$128.00	49G4A	$128.00
1-1/2" x 2-1/2"	4905A	$155.00	49G5A	$155.00

NOTE: Overall lengths are cut to the appropriate magnet size.

Filler Plates	M420		M450
Length		9"	10-1/4"
Width x Height	Plate No.	Price Ea.	Plate No.	Price Ea.
1-1/4" x 1/8"	4201F	$73.50	4501F	$73.50
1-1/4" x 1/4"	4202F	$73.50	4502F	$73.50
1-1/4" x 3/8"	4203F	$81.50	4503F	$81.50
1-1/4" x 1/2"	4204F	$81.50	4504F	$81.50
1-1/4" x 5/8"	4205F	$81.50	4505F	$81.50
3/4" x 1/2"	4206F	$81.50	4506F	$81.50
3/4" x 5/8"	4207F	$92.40	4507F	$92.40
3/4" x 3/4"	4208F	$92.40	4508F	$92.40

Filler Plates	M490/M490DE		M490G Corrosion Resistant
Length		12-1/2"	11"
Width x Height	Plate No.	Price Ea.	Plate No.	Price Ea.
1-1/4" x 1/8"	4901F	$73.50	49G1F	$73.50
1-1/4" x 1/4"	4902F	$73.50	49G2F	$73.50
1-1/4" x 3/8"	4903F	$81.50	49G3F	$81.50
1-1/4" x 1/2"	4904F	$81.50	49G4F	$81.50
1-1/4" x 5/8"	4905F	$81.50	49G5F	$81.50
3/4" x 1/2"	4906F	$81.50	49G6F	$81.50
3/4" x 5/8"	4907F	$92.40	49G7F	$92.40
3/4" x 3/4"	4908F	$92.40	49G8F	$92.40

Note: When ordering 422, 452 or 492 two Angle Brackets or Filler Plates are required. Double bracket part # is no longer available convert two single brackets.

Electromagnetic Specialty Locks and Accessories

Patent # 4,957,316

M490G Gate Lock

with Limited Lifetime Warranty on Magnetic Coil Assembly Standard Features

• Includes universal mounting brackets for swinging or sliding gate
• Special corrosion-resistant finish
• 1/2" EMT compression fitting
• Built in voltage spike suppression
• Door status monitor
• Magnetic Bond Sensor
• ANSI/BHMA 156.23, Outdoor Rated Certified for use -31° to 151° F (-35° to 66° C)

Specifications	M490G
Holding Force	1500 lbs
Input Voltage (Standard Unit)	12/24 VDC
Current Draw (Amps Standard Unit)	.65A @ 12 VDC
Dual Voltage Field Selectable	.35A @ 24 VDC
Height	3"
Length	11"
Width	1-3/4"
Weight (Approximate)	14 lbs

1. Select Model

M490G	Gate Lock	$727.00

320M MiniLine Magnet Lock

with Limited Lifetime Warranty on Magnetic Coil Assembly Standard Features

• Mortise mount for sliding doors
• Includes mounting tabs and armature mounting block
• Door status monitor and Magnetic Bond Sensor
• Adjustable relocking delay
• UL 10C listed; cUL
• CSFM California State Fire Marshal listed

Specifications	320M
Holding Force	400 lbs. @ 12 VDC; 550 lbs. @ 24 VDC
Input Voltage	12/24 VDC
Current Draw	.23A @ 12 VDC
(Dual Voltage Field Selectable)	.45A @ 24 VDC
Height	1-3/8"
Length	7"
Width	1-7/8"
Weight (Approximate)	6 lbs

Note: For Wood Frames: Due to higher ambient operating temperatures, it is REQUIRED that the 12 VDC configuration be used.

1. Select Model

320M Mini Line	$618.00

GF3000 Shear Lock Mortise Series with Limited Lifetime Warranty on Magnetic Coil Assembly Standard Features

• Microprocessor controlled
• Built-in auto relocking switch (ARS)
• Jump 1/4" gap no in-rush current (noticeable noise level when connecting)
• Automatic voltage selection 12 VDC or 24 VDC
• Cool temperature regulator
• Adjustable time delay: 1-30 sec. from face of magnet

Patent # 6,611,414

1. Select Model

GF3000	Standard Unit Adjustable from top edge of door	$1,153.00
GF3000TRD	Top Rail Door Mounting assembly which provides armature adjustment from latch edge of door Recommended with zero clearance condition between top of door and ceiling	$1,584.00
GF3000BRD	Bottom Rail Door Mounting assembly to mortise armature into bottom rail of door Magnet is installed in floor/threshold Provides solution when no top rail is available	$1,700.00

2. Select Options

DSM/MBS	Door Status Monitor/Magnetic Bond Sensor	$283.00

Specifications
Holding Force	3000 lbs
Current Draw	0.90A @ 12 VDC 0.45A @ 24 VDC
Lock Size	9-1/2" L x 1-1/2" W x 1-1/2" H
Weight (Approximate)	7 lbs
w/ Mounting Tabs	11-9/16" L x 1-1/2" W x 1-1/2" H
Armature	8-3/8" L x 1-3/8" W x 1/2" D
Armature Bracket	10-5/8" L x 1-3/8" W x 1" D

Note: Filtered, regulated power supply recommended. See See PS900 Series Power Supplies.

Patent # 6,611,414

GF3000 Shear Lock Surface Series with Limited Lifetime Warranty on Magnetic Coil Assembly

Standard Features

• Built in auto relocking switch (ARS)
• Jump 1/4" gap no in-rush current (noticeable noise when connecting)
• Automatic voltage selection 12 VDC or 24 VDC
• Cool temperature regulator

• Adjustable time delay, 0-30 sec. from face of magnet
• Satin black, anodized housing (not available in special finishes)
• ANSI/BHMA 156.23
• UL 10C listed; cUL
• CSFM Carlifornia State Fire Marshal listed

1. Select Model

GF3000SM	Standard Unit (outswinging doors) Adjustable from top edge of armature. Finish plates available in 628 Satin Aluminum, Clear Anodized Finish	$1,405.00
GF3000TJ	Top Jamb Unit (inswinging doors) Magnet mounts on inside top jamb. Adjustable from top edge of armature Finish plates available in 628 Satin Aluminum, Clear Anodized Finish	$1,405.00

2. Select Options

DSM/MBS	Door Status Monitor/Magnetic Bond Sensor	$283.00

Note: Housing available in satin black, anodized (335) finish only

Specifications
Holding Force	3000 lbs
Current Draw	0.90A @ 12 VDC 0.45A @ 24 VDC
Lock Housing	9-13/16" L x 1-1/4" W x 1-1/2" H
Armature Housing	8-3/8" L x 1-3/8" W x 1/2" D
Weight (Approximate)	9 lbs (SM, TJ suffix)

Note: Filtered, regulated power supply recommended See 900 Series Power Supplies

Electromagnetic Lock Parts

P44488484 PCB ASSY BASIC - w/ Tape P44488492 PCB ASSY PLUS - w/ Tape P23561665 M490 MTG PLATE P23561954 M450 MTG PLATE P23561962 M420 MTG PLATE P44487825 M490 DEL 2 CABLE ASSY P390498 SEX NUTS 5/16 INSIDE THREAD - 1-3/4" DOOR P390498-2 SEX NUTS 5/16 INSIDE THREAD - 1-1/2" DOOR P390498-5 SEX NUTS 5/16 INSIDE THREAD - 2" DOOR P390498-6 SEX NUTS 5/16 INSIDE THREAD - 2-1/8" DOOR P390498-7 SEX NUTS 5/16 INSIDE THREAD - 2-1/4" DOOR P390498-8 SEX NUTS 5/16 INSIDE THREAD - 2-3/8" DOOR P390498-9 SEX NUTS 5/16 INSIDE THREAD - 2-1/2" DOOR P390498-11 SEX NUTS 5/16 INSIDE THREAD - 2-3/4" DOOR P44489342 Armature TJ Fastener Pack P23566821 Magnetic TJ Fastener Pack P44489110 490 Armature Mounting Fastener Pack P44489128 450/420 Armature Mounting Fastener Pack P44488377 490/450 DBK - Double Magnet Connector Kit (Screw Mounting Pack Sold Separate) P44488286 420 DBK - Double Magnet Connector Kit (Screw Mounting Pack Sold Separate) P23879471 DE Cover Security Screw Pack P23841067 M450/490 Cover Plate Kit P23841075 M420 Cover Plate Kit P23840283 M420 Mag MTG Pack P23840291 M490/450 Mag MTG Pack P23840911 M490DE PCB Cover Kit P23840929 M490DE-S Cover Kit P23840937 M490DEP PCB Kit (:15 Sec. Delay) P47261542 M490DEP PCB Kit (:30 Sec Delay) P23840945 M490DE PCB Kit (:15 Sec. Delay) P47261543 M490DE PCB Kit (:30 Sec Delay) P47244950 M490DE Arm Mount Fast Pack P44487817 M490DE Cover Plate Assembly P23840952 M490DEP BOCA PCB Kit (:15 Sec. Delay) P47261544 M490DEP BOCA PCB Kit (:30 Sec Delay) P23841208 HDB SCREW Kit P23850357 Screw Pack - M400 Series Filler Plate - Angle Bracket P23566359 M490 Armature Housing Assembly P23561996 M450 Armature Housing Assembly P23566888 M420 Armature Housing Assembly P23561707 M490 Armature P44489318 M450 Armature M420 Armature P23562025 M490DEL Armature P44487767 P44488443 M490DE Basic Slave (DE Slave only) P44488468 M490DEP Plus Slave (DE Plus Slave only) P280037 GF3000 Armature Mounting Assembly TRD & BRD GF3000BR Threshold Box P280043 P280052 GF3000BRD Armature Assembly P280053 GF3000BRD Mounting Hardware Pack GF3000BRD Switch Kit ARSM P280055 P280113 GF3000 Magnet Bracket P280120 GF3000 Armature P280124 GF3000 Armature Bracket P280130-2 GF3000 Control Module GF3000 Mounting Hardware Pack P280135	Description
P280147 GF3000TRD Armature Assembly
P300000 GF3000BRD Connector Assembly
GF3000 & TRD Connector Assembly P300001
P679024 GF3000 DSM Switch

Notes

POWER SUPPLIES - TABLE OF CONTENTS
PS902 POWER SUPPLIES AND OPTION BOARDS	256
PS904 POWER SUPPLIES AND OPTION BOARDS	257
PS906 POWER SUPPLIES AND OPTION BOARDS	258

CONTACT INFORMATION FOR POWER SUPPLIES & ACCESSORIES

Payment Address: Schlage Electronic Security 15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service:	Technical Support:
Order Status, Credit Returns of Non-Defective	Technical Questions/Issues, Returns of
Products, General Sales Questions	Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:
Order_Entry_Schlage_Commercial@allegion.com	Electronic_Lock_TechProdSupport@allegion.com

For Power Supply Warranty Information please see page 12.

Power Supplies and Accessories

PS902 Power Supplies

2A @ 12/24 VDC – field selectable

Standard Features

• UL 294 Listed for Access Control
• Class2 rated power limited output
• Universal 120-240 VAC input
• Regulated and filtered DC outputs
• AC input and DC output LED indications
• Fire alarm relay and battery backup board attach to main board
• 1 Plug and play connector for optional distribution boards
• AC input status indication on outside cover
• AC status monitor
• 14" H x 12" W x 4" D enclosure

1. Select Power Supply

PS902	Base Power Supply (2A @ 12/24 VDC- field selectable) (approx. weight: 9 lbs) -PS902 is able to accept a total of one optional distribution board, plus one fire alarm relay along with one battery backup board and up to two 7A/hr batteries	$286.00

2. Select Optional Distribution Board with or without FA (Fire Alarm Relay)

1.	900-4R - 4 independently controlled relays	$192.00
1.	900-4R FA - 4 independently controlled relays with FA	$260.00
2.	900-2RS - 2 relay EL panic device control board	$177.00
2.	900-2RS FA - 2 relay output with FA	$245.00
3.	900-4RL - 4 relay board with integrated logic for controlling security interlocks, auto operators, and time delays	$524.00
3.	900-4RL FA - 4 relay board with integrated logic for controlling security interlocks, auto operators, and time delays with FA	$592.00
4.	900-8F - 8 fuse protected outputs	$68.00
4.	900-8F FA - 8 fuse protected outputs with FA	$136.00
5.	900-8P - 8 PTC protected outputs	$68.00
5.	900-8P FA - 8 PTC protected outputs with FA	$136.00
	* Fire alarm relay requires option board installation. If PS906 with fire alarm input only is desired, order 900-8P FA

3. Select Other Power Supply Options

1.	900-BBK - Battery Backup Kit (includes two 7A/hr batteries)	$274.00
1.	900-BB - Battery Backup Board only (sold separately)	$137.00
1.	900-BAT - Backup Battery Pack Two (2) 7A/hr batteries (sold separately)	$137.00
2.	900-FA - Fire Alarm Relay (EIR) module is a plug-in relay to provide an interface with fire or other emergency overide systems *may be installed directly on main board, or may be used with optional distribution board	$68.00
3.	900-KL - Key Lock	$43.70
4.	BAA-BAA Compliant Product	$43.70

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Note: PS902 power supplies require connection to AC line voltage. Installation and all electrical connections (high and low voltage) should be performed by a qualified electrical contractor.

PS904 Power Supplies

4A @ 12/24 VDC – field selectable

Standard Features

• UL 294 Listed for Access Control
• Class2 rated power limited output
• Universal 120-240 VAC input
• Regulated and filtered DC outputs
• AC input and DC output LED indications
• Battery backup board attaches to main board
• 2 Plug and play connectors for optional distribution boards
• AC input status indication on outside cover
• AC status monitor
• 14" H x 12" W x 4" D enclosure

1. Select Power Supply

PS904	Base Power Supply (4A @ 12/24 VDC- field selectable) (approx. weight: 11 lbs) PS904 is able to accept a total of two optional distribution boards, plus one battery backup board and up to two 7A/hr batteries	$546.00

2. Select Optional Distribution Board with or without FA (Fire Alarm Relay)

1.	900-4R - 4 independently controlled relays	$192.00
1.	900-4R FA - 4 independently controlled relays with FA	$260.00
2.	900-2RS - 2 relay EL panic device control board	$177.00
2.	900-2RS FA - 2 relay output with FA	$245.00
3.	900-4RL - 4 relay board with integrated logic for controlling security interlocks,	$524.00
	auto operators, and time delays
3.	900-4RL FA - 4 relay board with integrated logic for controlling security interlocks,	$592.00
	auto operators, and time delays with FA
4.	900-8F - 8 fuse protected outputs	$68.00
4.	900-8F FA - 8 fuse protected outputs with FA	$136.00
5.	900-8P - 8 PTC protected outputs	$68.00
5.	900-8P FA - 8 PTC protected outputs with FA	$136.00

^* Fire alarm relay requires option board installation. If PS904 with fire alarm input only is desired, order 900-8P FA

3. Select Other Power Supply Options

1.	900-BBK - Battery Backup Kit (includes two 7A/hr batteries)	$274.00
1.	900-BB - Battery Backup Board only (sold separately)	$137.00
1.	900-BAT - Backup Battery Pack Two (2) 7A/hr batteries (sold separately)	$137.00
2.	900-KL - Key Lock	$43.70
3.	BAA-BAA Compliant Product	$43.70

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Note: PS904 power supplies require connection to AC line voltage. Installation and all electrical connections (high and low voltage) should be performed by a qualified electrical contractor.

Power Supplies and Accessories

PS906 Power Supplies

6A @ 12/24 VDC – field selectable

Standard Features

• UL 294 Listed for Access Control
• Class 2 rated power limited output when paired with 8P option board
• Universal 120-240 VAC input
• Regulated and filtered DC outputs
• AC input and DC output LED indications

• Battery backup board attaches to main board
• 3 Plug and play connectors for optional distribution boards
• AC input status indication on outside cover
• AC status monitor
• 14" H x 12" W x 4" D enclosure

1. Select Power Supply

PS906	Base Power Supply (6A @ 12/24 VDC- field selectable) (approx. weight: 7 lbs) PS906 is able to accept three optional distribution boards or two optional boards with battery backup board and two 7A/hr batteries	$847.00

2. Select Optional Distribution Board with or without FA (Fire Alarm Relay)

1.	900-4R - 4 independently controlled relays	$192.00
1.	900-4R FA - 4 independently controlled relays with FA	$260.00
2.	900-2RS - 2 relay EL panic device control board	$177.00
2.	900-2RS FA - 2 relay output with FA	$245.00
3.	900-4RL - 4 relay board with integrated logic for controlling security interlocks, auto operators, and time delays	$524.00
3.	900-4RL FA - 4 relay board with integrated logic for controlling security interlocks, auto operators, and time delays with FA	$592.00
4.	900-8F - 8 fuse protected outputs	$68.00
4.	900-8F FA - 8 fuse protected outputs with FA	$136.00
5.	900-8P - 8 PTC protected outputs	$68.00
5.	900-8P FA - 8 PTC protected outputs with FA	$136.00

3. Select Other Power Supply Options

1.	900-BBK - Battery Backup Kit (includes two 7A/hr batteries) *Can not be used if 3rd distribution board is installed"	$274.00
1.	900-BB - Battery Backup Board only (sold separately)	$137.00
1.	900-BAT - Backup Battery Pack Two (2) 7A/hr batteries (sold separately)	$137.00
2.	900-KL - Key Lock	$43.70
3.	BAA-BAA Compliant Product	$43.70

BAA compliant products must have the cover letter On page 311 included with the order. Failure to use this cover letter will result in the customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead time, please contact customer service for details.

Note: PS906 power supplies require connection to AC line voltage. Installation and all electrical connections (high and low voltage) should be performed by a qualified electrical contractor.

SYSTEM ACCESSORIES - TABLE OF CONENTS
CONSOLES AND MONITORING STATIONS	260
8200 Series	260
800 Series	260
ELECTRONIC ACCESS RELEASING DEVICES	261
672 TouchBar	261
692 SmartBar	262
672 TouchBar / 692 SmartBar Parts	263
600 Series Heavy Duty Pushbutton	264
700 Series Entry Level Pushbutton	266
650 Series Heavy Duty Keyswitches	267
SPECIALTY EQUIPMENT	269
Door Position Switches	269
Door Cords	269
ACCESSORIES	270
Electric Horns	270
Scanners/PIRs	270
740 sereis Emergency Break Glass	270
660 Series Surface Mini Box	270
ELECTROMECHANICAL LOCKS	271
442S Series Cabinet Lock	271
PB405-PB405S PowerBolts	271

CONTACT INFORMATION FOR SYSTEM ACCESSORIES

Payment Address: Schlage Electronic Security 15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service:	Technical Support:
Order Status, Credit Returns of Non-Defective	Technical Questions/Issues, Returns of
Products, General Sales Questions	Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:
Order_Entry_Schlage_Commercial@allegion.com	Electronic_Lock_TechProdSupport@allegion.com

For System Accessories Warranty Information please see page 12.

Consoles and Monitoring Stations

8200 Series Consoles

Features

• Slope front design, with anodized face plate and durable housing
• Each station provides maintained or momentary SPDT pushbutton switch
• Red and green indicator lamps
• Security keyswitch
• Signaling Horn
• Alarm reset button
• 24 VDC operation
• UL 294 listed for access control system

Select Model

1. Select model - last digit indicates # of zones and select pushbutton function by zone

2. Specify a switch for each zone; M (momentary) or A (alternate action, maintained)

	ZONE	1	2	3	4	5	6	7	8
8204										$1,377.00
8208										$2,423.00

Replacement Parts

8200MS	Momentary Switch Assembly	$156.00
8200AS	Alternate Action (maintained) Switch Assembly	$156.00
P810033	8 Zone PCB Assembly	$243.00
P810049	Console Silence Button	$84.80
P810050	Console Keyswitch	$96.00

800 Series Remote & Local Monitoring Stations

800A 801

Select Model

800A	Remote monitoring - audible sound, 80 dB @ 2ft	$155.00
800L1	Local monitoring - one LED indicator - red, green or amber	$77.70
800L2	Two LED indicators - red, green or amber	$107.00
801	Local or Remote Monitoring Station (requires MBS option on locking device)	$287.00
801KS	Local or Remote Monitoring Station with Keyswitch (less cylinder) for Legal Release & Reset feature (requires MBS on locking device) SPDT momentary x SPDT maintained contact arrangement	$757.00

Electronic Access and Releasing Devices

Patent Issued

672 TouchBar

The 672 TouchBar is a request-to-exit device used to release electromagnetic locks. Designed for easy installation, smooth operation and maximum durability.

Standard Features

• Pushpad with "PUSH TO EXIT" signage
• 1/4" Movement to activate switch
• Heavy-duty aluminum extrusion and powder coated zinc end caps
• Double pole, double throw switch
• UL 294 listed for access control system

• Universal mounting system for aluminum, hollow metal and wood doors (Includes self-drilling, self-tapping screws for aluminum or wood door application: RIV nuts for hollow metal door applications)
• Field reversible

1. Select Model
672	For aluminum, hollow metal and wood doors	$366.00
2. Select Door Size
36", 42" or 48"	Standard door width	STANDARD
3. Select Finish
628	Clear Anodized Aluminum	STANDARD
313	Dark Satin Bronze Anodized Aluminum	$34.80
4. Select Pushpad
RD	Black pushpad with RED letters "PUSH TO EXIT"	STANDARD
GID	Black pushpad with Glow-In-The-Dark letters "PUSH TO EXIT"	NO CHARGE
5. Select Handing
RHR	Right Hand Reverse	STANDARD
LHR	Left Hand Reverse	NO CHARGE
6. Select Option/Accessory
AR	798-18, 18" x 1/2" Armored Door Cord (less wires) in/out swinging	$65.70
WD	Sexnut door kit for heavy-duty wood door and hollow metal door applications	$85.70
	(includes 4 sex bolts & screws)
SHK	Aluminum Door Mounting Shim Kit (Includes brackets/shims & screws)	$85.70

Parts

See 672 TouchBar Parts on page 263

Specifications

Mechanical

• Available in standard lengths to fit 36", 42" and 48" doors
• Can also be field cut at the installation site for custom lengths

Electrical

Switch: DPDT contacts rated 4A @ 30 VDC Wiring: 6 Conductor Cable - 20 AWG (standard)

Electronic Access and Releasing Devices

Patent Issued

692 SmartBar

The 692 TouchBar is a request-to-exit device with no moving parts used to release electromagnetic locks. Designed for easy installation, smooth operation and maximum durability.

Standard Features

• Push pad with "PUSH TO EXIT" signage
• Touch any point on the pushpad to release locking device
• Audible alarm
• Heavy duty aluminum extrusion and powder coated zinc end caps
• Directionally opposed infrared detection circuits
• DPDT relay

• Universal mounting system for aluminum, hollow metal and wood doors (Includes self-drilling, self-tapping screws for aluminum or wood door application: RIV nuts for hollow metal door applications)
• 798-18, 18" x 1/2" Armored door cord (798-18) shipped standard
• UL 294 listed for access control system

1. Select Model

692	For aluminum, hollow metal and wood doors	$665.00
2. Select Door Size
36", 42" or 48"	Standard door width	STANDARD
3. Select Finish
628	Clear Anodized Aluminum	STANDARD
313	Dark Satin Bronze Anodized Aluminum	$34.80
4. Select Pushpad
RD	Black pushpad with RED letters "PUSH TO EXIT"	STANDARD
GID	Black pushpad with Glow-In-The-Dark letters "PUSH TO EXIT"	NO CHARGE
5. Select Handing
RHR	Right hand reverse	STANDARD
LHR	Left hand reverse	NO CHARGE
6. Select Option/Accessory
WD	Sexnut door kit (for heavy-duty wood door and hollow metal door applications)	$85.70

SHK Aluminum Door Mounting Shim Kit (Includes brackets/shims & screws) $85.70

Parts

See 692 TouchBar Parts on page 263

Specifications

Mechanical

• Available in standard lengths to fit 36", 42" and 48" doors
• Can also be field cut at the installation site

Electrical

Input Voltage: 12 or 24 VDC. Maximum current draw .50A

Contact Rating: 4A @ 30 VDC

Wiring: 8 Conductor Cable - 20 AWG - 6 ft long

672 / 692 Shared Parts

P972797	CHAN END CAP BRKT - 672/692	$101.00
P972792	Exit Insert - Red	$96.00
P972791	Exit Plate - Black	$96.00
P900256	Mounting Screw Pack 672/692	$96.00
P900257-628	REX SNB KIT QTY-4 US32D	$96.00
P900257-313	REX SNB KIT QTY-4 SP313	$96.00
P900275-BLK	Spacer Adaptor - Black	$113.00
P900275-GRY	Spacer Adaptor - Gray	$113.00
P972772-313	Standard Pushbar-36-313	$164.00
P972772-628	Standard Pushbar-36-628	$164.00
P972773-313	Standard Pushbar-42-313	$164.00
P972773-628	Standard Pushbar-42-628	$164.00
P972774-313	Standard Pushbar-48-313	$164.00
P972774-628	Standard Pushbar-48-628	$164.00

672 Parts

P972766-628	672 Cover Plate - 36"- 628	$125.00
P972767-313	672 Cover Plate - 42"- 313	$125.00
P972767-628	672 Cover Plate - 42"- 628	$125.00
P972768-313	672 Cover Plate - 48"- 313	$125.00
P972768-628	672 Cover Plate - 48"- 628	$125.00
P972784-BLK	672 Channel End Cap - Black 672	$102.00
P972784-GRY	672 Channel End Cap	$102.00
P114281	PCB Assembly DPDT 672	$204.00

692 Parts

P692001	692 Beam Housing Assembly - Black	$175.00
P114285	Control Board Assy - 692	$340.00
P972769-313	692 Cover Plate - 36"- 313	$125.00
P972769-628	692 Cover Plate - 36"- 628	$125.00
P972770-313	692 Cover Plate - 42"- 313	$125.00
P972770-628	692 Cover Plate - 42"- 628	$125.00
P972771-313	692 Cover Plate - 48"- 313	$125.00
P972771-628	692 Cover Plate - 48"- 628	$125.00
P114287	692 Wire Harness - 6 Ft	$130.00
P114284	End Cap PCB Cable Assy - 692	$102.00

Electronic Access and Releasing Devices

600 Series Heavy Duty Pushbuttons

3A@30 VDC, Momentary (Standard) contacts

621 623

621-NS 623-NS

625

1. Select Model

Product No.	Cover Plate	Cone	Button
621AL	Stainless Steel	Plastic	1-1/4"	Aluminum	$214.00
621AL EX	2-3/4" x 4-1/2"	Translucent	1-1/4"	Alum. "Push to Exit" engraved	$214.00
621AL RD EX			1-1/4"	Alum. (red coated), "Push to Exit" engraved	$214.00
621BLH			1-1/4"	Blue Handicapped symbol	$172.00
621BK			1-1/4"	Black	$172.00
621GR			1-1/4"	Green	$172.00
621GR EX			1-1/4"	Green "Push to Exit"	$172.00
621RD			1-1/4"	Red	$172.00
621RD EX			1-1/4"	Red "Push to Exit"	$172.00
621GID			1-1/4"	Glow-in-the-Dark	$172.00
621GID EX			1-1/4"	Glow-in-the-Dark "Push to Exit"	$172.00
623BLH	Stainless Steel	Plastic	1-5/8"	Blue Handicapped symbol	$172.00
623BK	2-3/4" x 4-1/2"	Translucent	1-5/8"	Black	$172.00
623GR			1-5/8"	Green	$172.00
623GR EX			1-5/8"	Green "Push to Exit"	$172.00
623RD			1-5/8"	Red	$172.00
623RD EX			1-5/8"	Red "Push to Exit"	$172.00
623GID			1-5/8"	Glow-in-the-Dark	$172.00
623GID EX			1-5/8"	Glow-in-the-Dark "Push to Exit"	$172.00
625BLH	Stainless Steel	Plastic	2-3/4"	Blue Handicapped symbol	$172.00
625BK	2-3/4" x 4-1/2"	Translucent	2-3/4"	Black	$172.00
625GR			2-3/4"	Green	$172.00
625GR EX			2-3/4"	Green "Push to Exit"	$172.00
625RD			2-3/4"	Red	$172.00
625RD EX			2-3/4"	Red "Push to Exit"	$172.00
631AL* 631AL EX* 631AL RD EX*	Cast Zinc 2-3/4" x 4-1/2" Extreme Duty	Zinc	1-1/4" 1-1/4" 1-1/4"	Aluminum Aluminum "Push to Exit" engraved Aluminum (red coated) "Push to Exit" Engraved silver	$315.00 $315.00 $315.00

^* not available in special finishes

2. Select Options

DA	Delayed Action (3A @ 30 VDC, form Z contacts)	$459.00
NS	Narrow Stile - Stainless Steel Plate (1-3/4" x 4-1/2")	NO CHARGE
AA	Alternate Action/Maintained (3A @ 30VDC)	NO CHARGE
L2/ILL	LEDs for glow thru cone for 621 and 623 models (12-24 VDC .025A @ 28VDC)	$69.30
DP	DPDT - Double pole, double throw (not available with DA option)	$34.80

3. Select Finish - Heavy Duty Plate (HDP Included - Required for Special Finish)

630	BHMA 630/US32D on .035 Satin Stainless Steel	Standard
SF-626	Satin Chrome on heavy-duty zinc	$58.90
SF-625	Bright Chrome on heavy-duty zinc	$151.00
SF-613	Oil Rubbed Bronze on heavy-duty zinc	$151.00

600 Series Heavy Duty Pushbutton Parts

PCB Assembly Only

P620009-1	DPDT - PC Board Assembly	$80.00
P620009	SPDT - PC Board Assembly	$45.20
P395362	L2/ILL - PC Board Assembly	$69.90

621 Button Only

P620136	Button 1-1/4" Metal	$43.00
P620026-1	Button 1-1/4" Metal Push to Exit	$43.00
P620092-BL	Button 1-1/4" Blue Handicap	$30.60
P620090-BK	Button 1-1/4" Black	$30.60
P620090-GID	Button 1-1/4" GID	$30.60
P620090-GR	Button 1-1/4" Green	$30.60
P620090-RD	Button 1-1/4" Red	$30.60
P620091-GID	Button 1-1/4" GID	$30.60
P620091-GR	Button 1-1/4" Green	$30.60
P620091-RD	Button 1-1/4" Red	$30.60

623 Button Only

P620032-BL	Button 1-5/8" Blue Handicap	$30.60
P620014-GID	Button 1-5/8" GID	$30.60
P620031-GID	Button 1-5/8" GID Push to Exit	$30.60
P620014-GR	Button 1-5/8" Green	$30.60
P620031-GR	Button 1-5/8" Green Push to Exit	$30.60
P620014-RD	Button 1-5/8" Red	$30.60
P620031-RD	Button 1-5/8" Red Push to Exit	$30.60
P620014-BK	Button 1-5/8" Black	$30.60

625 Button Only

P620029-BK	Button 2-3/4" Black	$30.60
P620027-BL	Button 2-3/4" Blue Handicap	$30.60
P620029-GR	Button 2-3/4" Green	$30.60
P620028-GR	Button 2-3/4" Green Push to Exit	$30.60
P620029-RD	Button 2-3/4" Red	$30.60
P620028-RD	Button 2-3/4" Red Push to Exit	$30.60

Faceplates Only

P620008-613	Heavy Duty Plate - 613 Dark Satin Bronze	$151.00
P620008-625	Heavy Duty Plate - 625 Bright Chrome	$151.00
P620008-626	Heavy Duty Plate - 626 Satin Chrome	$55.30
P620020-613	Heavy Duty Plate Narrow - 613 Dark Satin Bronze	$151.00
P620020-625	Heavy Duty Plate Narrow - 625 Bright Chrome	$151.00
P620020-626	Heavy Duty Plate Narrow - 626 Satin Chrome	$58.90
P620088	Plate Narrow Stainless Steel	$58.90
P620033	Plate Single-Gang Stainless Steel	$58.90

Other Parts

P630032	Anti-Tamper Plug - 631 Stainless Steel	$5.70

Electronic Access and Releasing Devices

700 Series Entry Level Pushbutton

701RD-L2 701RD-NS-L2 709BLH ILL-L2 709RD EX ILL-L2

Specifications

Output contact Rating:

701 Series 3A @ 30 VAC/VDC, momentary SPDT contacts 709 Series 5A @ 30 VAC/VDC, momentary SPDT contacts

1. Select Model

Product No.	Cover Plate			Button
701RD	Stainless Steel Only	Red	7/8"		$140.00
701BK	2-3/4" x 4-1/2"	Black	7/8"		$140.00
701RD EX		Red	5/8"	Engraved "Push to Exit"	$140.00
701RD EX ILL		Red	5/8"	Illuminated "Push to Exit"	$169.00
709RD EX ILL*	Stainless Steel Only	Red	2" sq	Illuminated "Push to Exit"	$164.00
709GR EX ILL*	2-3/4" x 4-1/2"	Green	2" sq	Illuminated "Push to Exit"	$164.00
709BLH ILL*		Blue	2" sq	Illuminated Handicapped Symbol	$164.00

^* Must Specify 12 VDC or 24 VDC when ordering 709 Series Pushbuttons

2. Select Options

L2	Two LEDs, red or green, dual voltage	$69.60
AA	Alternate Action - maintained for 701 Series only	$21.30
NS	Narrow Stile plate for 701 Series only	NO CHARGE

Parts

P100682	701 Button 7/8" - Red	$43.00
P100688	701 Button 7/8" - Black	$43.00
P701629	701 Narrow Stainless Steel Plate	$34.00
P701607	701 Stainless Steel Plate	$34.00
P701628	701 Stainless Steel Plate L2	$34.00

Electronic Access and Releasing Devices

650 Series Heavy Duty Keyswitches

Patent #6689972

• Patented Magnetic Spring Design
• Momentary to Maintained Functions
• 5A @ 30 VDC, SPDT contacts
• Standard faceplate finish 630 Stainless Steel

653-04-L2 653 -04-L2-NS

Note: 650 Series Keyswitches operate with either a 1-1/8" or 1-1/4" cylinder having a straight type cam. 1-1/4" Cylinders require a 1/8" blocking / spacer ring (included with the CYL and CYL-KA options). Cannot be used with cylinder and/or collar greater than 1-3/8".

1. Select Keyswitch Function

Product No.	Description	Cover Plate
653-04	SPDT maintained single direction - Stainless Steel	2-3/4" x 4-1/2"	$231.00
653-05	SPDT momentary single direction - Stainless Steel	2-3/4" x 4-1/2"	$231.00
653-14	DPDT maintained single direction - Stainless Steel	2-3/4" x 4-1/2"	$266.00
653-15	DPDT momentary single direction - Stainless Steel	2-3/4" x 4-1/2"	$266.00
653-1414	(2) DPDT maintained bi-direction - Stainless Steel	2-3/4" x 4-1/2"	$352.00
653-1415	DPDT maintained x DPDT momentary - Stainless Steel	2-3/4" x 4-1/2"	$352.00
653-1515	(2) DPDT momentary bi-direction - Stainless Steel	2-3/4" x 4-1/2"	$352.00
653-041	SPDT maintained x key remove one position - Stainless Steel	2-3/4" x 4-1/2"	$231.00
653-0404	(2) SPDT maintained bi-direction - Stainless Steel	2-3/4" x 4-1/2"	$266.00
653-0405	SPDT maintained x SPDT momentary - Stainless Steel	2-3/4" x 4-1/2"	$266.00
653-141	DPDT maintained x key remove one position - Stainless Steel	2-3/4" x 4-1/2"	$266.00
653-0505	(2) SPDT momentary bi-direction - Stainless Steel	2-3/4" x 4-1/2"	$266.00

2. Select Option

L2	Two LEDs (red/green), dual voltage 12/24 VDC	$69.60
NS	Narrow Stile - Stainless Steel Plate (1-3/4" x 4-1/2")	NOCHARGE
ATS	Anti-Tamper Switch	$65.70
WP	Water Resistant Cover fits 1-1/8" cylinder only (not available with NS or L2 or special finishes)	$83.10
CYL	1-1/4" Schlage Everest Mortise Cylinder with two keys & 1/8" spacer ring	$77.70
CYL-KA (keyed alike)	1-1/4" Schlage Everest Mortise Cylinder with two keys & 1/8" spacer ring	$77.70

3. Select Plate Finish

630	BHMA 630/US32D on .035 Satin Stainless Steel	Standard
SF-626	Satin Chrome on heavy-duty zinc	$58.90
SF-625	Bright Chrome on heavy-duty zinc	$151.00
SF-612	Satin Bronze on heavy-duty zinc	$151.00
SF-613	Oil Rubbed Bronze on heavy-duty zinc	$151.00
SF-605	Bright Brass on heavy-duty zinc	$151.00

4. Select Optional Blocking Ring - (only necessary when using with a competitive cylinder)

36-079	Blocking ring for use without compression ring	$14.40

5. Specify Blocking Ring Size - (example: 36-079-012)

012	1/8" length
018	3/16" length
025	1/4" length
031	5/16" length
037	3/8" length
043	7/16" length
050	1/2" length

650 Series Heavy Duty Keyswitch Parts

Mounting Hardware Only

P630013-605	Heavy Duty Mounting Hardware - 605 Bright Brass	$24.80
P630013-612	Heavy Duty Mounting Hardware - 612 Satin Bronze	$24.80
P630013-613	Heavy Duty Mounting Hardware - 613 Dark Satin Bronze	$24.80
P630013-625	Heavy Duty Mounting Hardware - 625 Bright Chrome	$24.80
P630013	Heavy Duty Mounting Hardware - 626 Satin Chrome	$12.50

Single Gang Faceplate Only

P653063	Standard Plate - Stainless Steel	$58.90
P653009-605	Heavy Duty Plate - 605 Bright Brass	$151.00
P653009-612	Heavy Duty Plate - 612 Satin Bronze	$151.00
P653009-613	Heavy Duty Plate - 613 Dark Satin Bronze	$151.00
P653009-625	Heavy Duty Plate - 625 Bright Chrome	$151.00
P653009-626	Heavy Duty Plate - 626 Satin Chrome	$58.90
P653064	Standard Plate - Stainless Steel - L2	$58.90
P653015-605	Heavy Duty Plate - L2 - 605 Bright Brass	$151.00
P653015-612	Heavy Duty Plate - L2 - 612 Satin Bronze	$151.00
P653015-613	Heavy Duty Plate - L2 - 613 Dark Satin Bronze	$151.00
P653015-625	Heavy Duty Plate - L2 - 625 Bright Chrome	$151.00
P653015-626	Heavy Duty Plate - L2 - 626 Satin Chrome	$58.90

Narrow Faceplate Only

P653065	Standard Plate Narrow - Stainless Steel	$58.90
P653026-605	Heavy Duty Plate Narrow - 605 Bright Brass	$151.00
P653026-612	Heavy Duty Plate Narrow - 612 Satin Bronze	$151.00
P653026-613	Heavy Duty Plate Narrow - 613 Dark Satin Bronze	$151.00
P653026-625	Heavy Duty Plate Narrow - 625 Bright Chrome	$151.00
P653026-626	Heavy Duty Plate Narrow - 626 Satin Chrome	$58.90
P653066	Standard Plate Narrow - Stainless Steel - L2	$121.00
P653027-605	Heavy Duty Plate Narrow - L2 - 605 Bright Brass	$129.00
P653027-612	Heavy Duty Plate Narrow - L2 - 612 Satin Bronze	$151.00
P653027-613	Heavy Duty Plate Narrow - L2 - 613 Dark Satin Bronze	$151.00
P653027-625	Heavy Duty Plate Narrow - L2 - 625 Bright Chrome	$151.00
P653027-626	Heavy Duty Plate Narrow - L2 - 626 Satin Chrome	$58.90

Switches Only

P653067	Anti-Tamper Switch and Magnet	$24.80
P653059	Switch and Lead Assembly	$30.60

Specialty Equipment

679-05 Concealed SPDT Magnetic Switch

7764 Concealed door position switch

Door Cord

Door Position Switches

674-OH	Overhead Door Floor Mount	$288.00
	679 SERIES CONCEALED SPDT MAGNETIC SWITCH (0.3A @ 30 VDC)
679-05	Wood Door and Frame	$63.00
679-05HM	HM Hollow Metal Door and Frame	$87.20
679-05WD	WD Wood Door and Metal Frame	$104.00

7700 SERIES DOOR POSITION SWITCHES (0.25A @ 30 VDC)

7764	Concealed / Flush Mount
7766	Surface Mount	$222.00

Door Cords

788-12	12" x 3/8" Armored Door Cord - less wires	$68.10
788C-12	12" x 3/8" Armored Door Cord with 20" 4-conductor wire	$104.00
788-18	18" x 3/8" Armored Door Cord - less wires	$90.80
788C-18	18" x 3/8" Armored Door Cord with 26" 4-conductor wire	$122.00
798-12	12" x 1/2" Armored Door Cord - less wires	$78.90
798C-12	12" x 1/2" Armored Door Cord with 20" 4-conductor wire	$104.00
798-18	18" x 1/2" Armored Door Cord - less wires	$100.00
798C-18	18" x 1/2" Armored Door Cord with 26" 4-conductor wire	$122.00

Notes: C Suffix = 20 AWG wires Classified by UL to UL 10C

Accessories

Electronic Horns

• Immediate, local audible warning device
• Designed for indoor application
• Surface and flush mounting kits included with all horns
• Latching units require a reset action
• Strobe units activate / deactivate based on the state of the horn
• Horn color is white
• Dual decibal settings high/low 102 and 88 with dba's

5.6˝

1. Select Model

1910-1	12/24 VDC Horn, current draw 14 mA @ 12 VDC; 28 mA @ 24 VDC	$469.00
1910S-1	24 VDC Horn with strobe, current draw 71mA	$639.00
L1910-1	24 VDC Horn with latching, current draw 28mA	$649.00
L1910S-1	4.7˝ 24 VDC Horn with strobe & latching, current draw 71mA	$848.00

Scanners/PIRs

SCAN II-W

• Passive Infrared Detector
• Surface Mounting height range is from 7 to 15 ft
• 2.5˝ • Two form "C" relay contacts rated 2A @ 30 VDC for DC resistive loads
• Relay latch time is adjustable up to 64 seconds
• UL 294 listed by manufacturer as an access control device
• Designed for indoor applications

1. Select Model

Scan II - B	Black	$554.00
Scan II - W	White	$554.00

740 Series Emergency Break Glass

740

Switch contact form "Z", rated 6A @ 30 VDC

740	Assembly only	$396.00
741	With indicator light	$405.00
742	With Sonalert	$440.00

Assembly mounts in 3 gang electrical box

P800003 is the part number for the 5 pack of glass disc replacements. Cost: $106.00

660 Series Surface Mini Box

• Dimensions: 2" H x 2" W x 1" D
• Switch contact rating: 6A @ 120 VAC

660-T4	SPDT Maintained Toggle	$146.00
660-PB	SPDT Momentary Pushbutton	$149.00

Recommended for concealed desk application

Electromechanical Locks

Patent #'s 4,557,121/4,579,376 442S Series Cabinet Lock

442S

Specifications

Overall Dimensions: 3" L x 1" W x 1" D

Current Draw: 0.50A @ 12 VDC; 0.25A @ 24 VDC (field selectable)

1. Select Model

442S	Fail Secure
Lock with strike - Black Lexan finish	$275.00

PB405/PB405S PowerBolts

Standard Features

• Magnetic Door Status Monitor
• Magnetic Relocking Switch

Specifications

Bolt Size 405/405S:	.61" diameter x .67" throw
PB405 overall size:	7.87" x 1.26" x 1.57", 90° locking
PB405S overall size:	7.87" x 1.26" x 1.57"
Current Draw:	0.9A @ 12 VDC; 0.45A @ 24 VDC 12/24 VDC dual voltage, field selectable

Note: Electromechanical locks not recommended where life safety may be compromised, or where panic bar hardware is the only means of egress. Mortise mount electric bolts furnished in Satin Aluminum finish.

1. Select Model

PB405	Fail Safe, Rectangular Front	$570.00
PB405S	Fail Secure, Rectangular Front	$708.00
PB405-RFK	Retro Fit Kit	$64.20

Fail Secure Lock - Requires power to unlock Fail Safe Lock - Requires power to lock

PB405/PB405S

Notes

VON DUPRIN ACCESS CONTROL PRODUCTS - TABLE OF CONTENTS
ELECTRIC STRIKES 4200 Series 6400 Series 5100 Series 6100 Series 6200 Series 6300 Series	274 274 274 275 275 275 276
POWER SUPPLY	276
DELAYED EXIT SYSTEM	276
ELECTRIC POWER TRANSFER	276
VON DUPRIN REMOTE UNDOGGING AND REMOTE MONITORING	276

CONTACT INFORMATION FOR VON DUPRIN ACCESS CONTROL PRODUCTS

Payment Address: Von Duprin

15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service:	Technical Support:
Order Status, Credit Returns of Non-Defective	Technical Questions/Issues, Returns of
Products, General Sales Questions	Defective Products, Repairs
Email Orders To:	Contact For Technical Assistance:
Order_Vondurpin@allegion.com	Exits_TechProdSupport@allegion.com

For Von Duprin Access Control Products Warranty Information please see the Von Duprin Exit Hardware and Parts book.

Von Duprin Electric Strikes

4200 Series Von Duprin Electric Strikes for cylindrical and deadlatch locks

Orderable through Schlage (ships from Security, CO) or Von Duprin (ships from Indianapolis, IN)

Features:

• Field selectable fail-safe/fail-secure without dissassembly
• Dual voltage: 12 VDC at 0.20 A/ 24 VDC at 0.10 A
• Finish: BHMA 630 / US32D stainless steel, satin finish
• Compatible with all Schlage and Falcon cylindrical locks as well as cylindrical and deadlatch locks of many other manufacturers
• Meets ANSI/BHMA 156.31 Grade 1 endurance & dynamic strength
• Meets ANSI/BHMA 156.31 Grade 2 static strength

Model	Fire Rated	Throw	Hollow Metal	Wood Aluminum Single		Mullion Pair
4211		1/2"-3/4"	n	n	n	Shallow 1-3/8" backbox depth	$192.00
4212		1/2"-5/8"	n	n	n	Includes latchbolt monitor. Shallow backbox.	$231.00
Options (please specify):
S012		Rectifier Kit				Converts 12 VAC to 12 VDC	$42.40
S024		Rectifier Kit				Converts 24 VAC to 24 VDC	$42.40
EB		EB Entry Buzzer				Use in fail-secure applications	$42.40
Available Parts:
P050805		4200Hardware Kit				Includes: mounting tab hardware, mounting screws, allen wrench and diode	$15.50
P90114		Faceplate, 4200, square corner					$19.40
P90110		Faceplate, 4200, round corner					$19.40

For additional parts list, please see Von Duprin price book.

6400 Series Von Duprin Modular Electric Strike for mortise or cylindrical locks

Orderable through Schlage (ships from Security, CO) or Von Duprin (ships from Indianapolis, IN)

Features:

• Dual voltage: 12 VDC at 0.375 A / 24 VDC at 0.19 A
• Finish: BHMA 630/US32D stainless steel, satin finish
• Modular options fit cylindrical and nearly any mortise lock.
• Includes movable deadbolt keeper, plug and deadlatch ramp inserts.
• ANSI/BHMA 156.31 Grade 1
• 1500 lbs. static strength
• UL1034 listed for burglary resistance
• 3-hour fire rated to UL10C (fail secure only)
• UL 294 listed for access control system units
• CSFM California State Fire Marshal listed

Model	Fire Rated	Throw	Hollow Metal	Wood	Aluminum	Single	Mullion Pair
6400	n	up to 3/4"	n	n	n	n		Up to 1" deadbolt throw (as night latch only)	$600.00
	Options (please specify):
LM6400		Latch Monitor						Optional plug-in latch monitor can be added in the field	$64.20
		For additional parts list, please see Von Duprin price book.
S012			Rectifier Kit Converts 12 VAC to 12 VDC						$42.40
S024					Rectifier Kit Converts 24 VAC to 24 VDC				$42.40
EB					EB Entry Buzzer Use in fail-secure applications				$42.40

Additional Electric Strikes available exclusively through Von Duprin:

Please see Von Duprin price book for current list price information.

5100 Series Von Duprin Electric Strike for cylindrical and deadlatch locks

Features:

• Adjustable keeper improves fit on tight door preps
• Field selectable fail-safe/fail-secure
• Dual voltage: 12 VDC at 0.38 A / 24 VDC at 0.19 A
• Available finishes: BHMA 689 / US SP28 aluminum; BHMA 622 / US19 flat black; BHMA 695 / US SP313 dark brown
• Compatible with Schlage and Falcon cylindrical and deadlatch locks including those of many other manufacturers
• Meets ANSI/BHMA 156.31 Grade 1 endurance & dynamic strength
• Meets ANSI/BHMA 156.31 Grade 2 static strength
• UL 1034 burglary-resistant

Model	Throw	Hollow Metal	Wood	Aluminum	Single	Mullion Pair
5100	1/2"-5/8"	n	n	n	n		3 faceplates cover HM, AL and Wood applications with hardware included for an all-in one boxed solution

For specified options and complete parts list, please see Von Duprin priceook.

6100 Series Von Duprin Electric Strikes for rim exit devices

Features:

• Furnished standard in fail secure configuration unless specified fail safe
• 24 VDC supplied standard if not specified otherwise
• Available finishes on a stainless steel construction: US3 Polished Brass; US4 Satin Brass; US10 Satin Bronze, clear coated; US10B Dark Bronze, Oil Rubbed; BHMA 629 / US32 Bright Stainless Steel; BHMA 630 / US32D Satin Stainless Steel
• Compatible with Von Duprin and Falcon rim exit devices and those of many other manufacturers
• Specify when using these strikes with a 55 rim device
• UL1034 burglary-resistant

	Fire		Hollow				Mullion
Model		Rated Throw	Metal	Wood	Aluminum	Single	Pair
6111	n	3/4"	n	n	n	n	n	Can be used with vertical rod exit devices
6112	n	3/4"	n	n	n	n		Designed to replace FA 310-5 with minor frame modification
6113	n	3/4"	n	n	n	n
6114		3/4"	n		n	n		Surface applied for use with rim nightlatch devices
6121		3/4"	n	n	n		*	* For rim exit devices on double doors without mullion

For specified options and complete parts list, please see Von Duprin priceook.

6200 Series Von Duprin Electric Strikes for mortise or cylindrical locks

Features:

• Furnished standard in fail secure configuration unless specified fail safe
• 24 VDC supplied standard if not specified otherwise
• Available finishes on stainless steel construction: US3 Polished Brass; US4 Satin Brass; US10 Satin Bronze, clear coated; US10B Dark Bronze, Oil Rubbed; BHMA 629 / US32 Bright Stainless Steel; BHMA 630 / US32D Satin Stainless Steel
• Compatible with mortise (without deadbolt) and cylindrical lock applications except where noted
• ANSI/BHMA 156.31 Grade 1 : 6211, 6211AL and 6211WF
• UL10C fire rated (fail secure only)
• UL1034 burglary-resistant

	Fire		Hollow				Mullion
Model		Rated Throw			Metal Wood Aluminum Single		Pair
6210	n	3/4"	n		n	n		Mortise only. Includes strike pocket inserts to accommodate deadlocking triggers
6211	n	3/4"	n		n	n		Retrofits VD 3140or FA 712
6211AL	n	3/4"			n	n		Retrofits FA 722
6211WF	n	3/4"		n		n		Retrofits FA 732 with minor frame modification
6212	n	3/4"	n		n	n		Fits modified ANSI 115.2 cutout. Retrofits VD 3146.
6212WF	n	3/4"		n		n
6213	n	3/4"	n	Retrofits only	n	n		Retrofits VD 3041, 3042, 3061 and 3062
6214	n	3/4"	n		n	n		Retrofits FA 310-2 3/4
6215	n	3/4"	n		n	n		Retrofits FA 310-2
6216	n	3/4"	n	n	n	n		Retrofits FA 310-3-1. For mortise with deadbolt 1" throw. Deadbolt must be manually operated
6221	n	3/4"	n	n	n		n	Open back, retrofits VD 3071 and 3072. 4-3/4" minimum stile required
6222	n	3/4"	n		n		n	Open back, retrofits FA 310-2 3/4 OB
6223	n	3/4"	n	n	n		n	Closed back, retrofits VD 3091 and 3092. 4-3/4" minimum stile required
6224	n	3/4"	n		n		n	Closed back, retrofits FA 310-2 3/4. For door thicknesses 1-3/4" or 2-1/4"
6224AL	n	3/4"			n		n	Closed back, retrofits FA 310-2RF. For door thicknesses 1-3/4" or 2-1/4"
6225	n	3/4"	n		n		n	Open back, retrofits FA 310-2 OB
6226	n	3/4"	n		n		n	Closed back, retrofits FA 310-2. For door thicknesses 1-3/4" or 2-1/4"

For specified options and complete parts list, please see Von Duprin price book.

Von Duprin Access Control Products

6300 Series Von Duprin Surface Mount Electric Strike for rim exit devices

Features:

• Dual voltage: 12 VDC at 0.50 A / 24 VDC at 0.24 A
• Finish: BHMA 630 / US32D stainless steel, satin finish
• Compatible with most rim exit devices
• UL1034 burglary-resistant
• UL 10C 3-hour fire rated (fail secure only)
• UL 294 listed for access control system units
• CSFM California State Fire Marshal listed

Model	Fire	Rated Throw	Hollow Metal	Wood	Aluminum	Single	Mullion Pair
6300	n	3/4"	n	n	n	n	n	No cut, surface mount design

For specified options and complete parts list, please see Von Duprin priceook.

PS914 Von Duprin Power Supply See Von Duprin Exit Hardware & Parts Price Book

4A @ 12/24 VDC – field selectable

• Designed for high inrush current
• UL 294 Listed for Access Control
• Class 2 rated power limited output
• Universal 120-240 VAC input
• Regulated and filtered DC outputs
• LED indicators: AC input (visible on outside of enclosure) and DC output
  • 2 connectors for optional distribution boards
  • AC monitoring
  • 14" H x 12" W x 4" enclosure

Von Duprin Delayed Exit System

DE5300 Series See Von Duprin Exit Hardware & Parts Price Book Application • Designed to meet NFPA 101 "Special Locking Arrangement" applications • Ideal for controlled areas • Addresses life safety and security needs • Commonly used on narrow stile doors where a standard narrow stile Chexit is not practical

Von Duprin Electric Power Transfer

EPT	See Von Duprin Exit Hardware & Parts Price Book
Application	• Provide a means for transferring electrical power from a door frame to the edge of a swinging door • Units are completely concealed when the door is in the closed position • Ideally suited for applications involving abuse or heavy traffic
Popular Models	• EPT-2: Two 18 gauge wires; Up to 2 amps @ 24VDC, with a 16 AMP maximum surge • EPT-10: Ten 24 gauge wires; Up to 1 amp @ 24VDC, with a 16 AMP maximum surge

See 2018 Von Duprin Exit Hardware & Parts price book for pricing and complete information. Additional electrified products available in the IVES price book & the LCN price book.

Von Duprin Remote Undogging and Remote Monitoring

Modular Retrofit Option for 98/99 and 33A/35A Series Devices

Model #	Description	List Price
47258681	Remote Undogging (RU) 3' kit	$977.00
47258682	Remote Undogging (RU) 4' kit	$977.00
47258683	Remote Monitoring (RM) 3' kit	$747.00
47258684	Remote Monitoring (RM) 4' kit	$747.00

Reference Notes

• Access control managed via an IP or RSI/ RS-485 connection to the ENGAGE gateway through Allegion software alliance members, consult your access control software provider for specific scope of support.
• ENGAGE gateway sold separately.
• Compatible with 98/99 and 33A/35A series rim, SVR, CVR, CVC and 3-point devices.
• Specify CON for Allegion Connect
• RU option:
  • Enables both remote undogging and door status monitoring (DPS, RX and LX)
  • Not compatible with exit devices with the following options: QEL, DI/CDSI/HDSI, RX2, Schlage AD/CO Trim, SD, SS, PN, E-Strikes/Pullman Latch, CX
  • Compatible device lengths: All 33A/35A and 98/99 device types 3' (914 mm) length to 2' 9" (838 mm), 4' (1219 mm) length to 3' 3" (991 mm)
• RM option:
  • Enables door status monitoring (DPS, RX and LX) only
  • Not compatible with exit devices with the following options: DI/CDSI/HDSI, RX2, Schlage AD/CO Trim, SD, SS, PN, E-Strikes/Pullman Latch, CX
  • If the door and exit device are fire rated, and the exit device type is a 98/99-F Rim manufactured prior to April 1, 2018, a new center case will be required before proceeding with the installation of the RM kit. 98/99-F Rim Center Case Kit Less Cover, part number 050026.

BIOMETRICS - TABLE OF CONTENTS
BIOMETRICS OVERVIEW	278
HOW TO ORDER	279
BIOMETRIC HANDREADERS Memory Options Communication Options Card Reader & Keypad Options Outdoor Options Power Options	280 280 280 281 281 281
BIOMETRIC ACCESSORIES Network Accessories Miscellaneous Accessories HandNet Software Extended Warranty Training Courses	282 282 282 282 282 282
BIOMETRIC PARTS	283

CONTACT INFORMATION FOR BIOMETRIC HANDREADERS

Email Order To: sbsom@allegion.com Fax Order To: 800-452-0665

Payment Address: Recognition Systems, Inc 15934 Collections Center Drive

Chicago, IL 60693

877-671-7011
Customer Service:	Technical Support:
General Sales Questions, Order Status,	Technical Questions/Issues, Returns of
Credit Returns of Non-Defective Products	Defective Products, Repairs
Email Orders To:	877-671-7011
Order_Entry_Schlage_Commercial@allegion.com	Readers_Credentials_Biometrics_TechProdSupport@allegion.com

For Biometric Handreaders Warranty Information please see section 18 of Terms and Conditions (page 5).

Biometrics Overview

Schlage brings the security and convenience of biometric technology to any access control system with the HandKey II hand geometry readers. By using your hand as your credential, this technology provides reliable one-to-one matching - personal proof that people are who they claim to be.

Schlage biometric HandReaders can also be integrated with other reader technologies such as smart card, proximity or magnetic stripe, to provide a highly secure system that verifies who you are in one transaction.

The benefits of using HandReaders are:

• Fast and easy to use
• Field-proven reliable technology
• Integrates into existing access control systems
• Increases convenience by eliminating cards
• Lower administrative costs compared to card-based systems
• Standalone or networked options

Purchase Orders:

Fax purchase orders to: 800-452-0665

All purchase orders must include the following information:

• Purchase order number
• Invoice address
• Ship to address
• Shipping method
• Part number
• Pricing
• Any special configuration ID #s
• Any options requiring factory installation

Missing or inaccurate information may cause a delay in the order process.

Quick Turn Program:

A quick turn program is available for urgent orders up to 10 units (11 or more, please call the factory directly).

• A 15% premium charge is applied to the total order for items requiring a one day turn
• A 5% premium charge is applied to the total order for items requiring a three day turn

All orders must be received by 11:00 am PT to count as one day.

Purchase orders must include the premium charge as a separate line item.

Quick Turn may not be available on all items (Please contact the factory for expedited availability).

Payment Terms:

Please refer to the October, 2017 Terms and Conditions.

Order Changes/Cancellations:

Please refer to the October, 2017 Terms and Conditions.

Packing:

Company will pack, mark, and ship the Products according to its standard procedures for shipment, unless the parties agree, in writing, that Company will comply with any special instructions provided by Customer. Compliance with special instructions may result in an increased price.

Biometric HandReaders

HandKey F Series

Polycarbonate housing. Expanded memory options are available.

HK-2-F3 HandKey F Series with memory for 512 users $2,902.00

HandKey-2 Hand Geometry Reader

Memory Options

Memory expansions can be factory configured when ordered with the HandReader. For field expansions, the serial number on the main board must be supplied with the order so that an authorization code can be generated.

Note: Credit will not be given for field installed memory expansion returns.

F Series

Readers built after 2003 or readers that have been upgraded to main boards with a push button reset switch.

EM-801-F3	HandKey Memory Expansion to 9,728 users	$272.00
EM-803-F3	HandKey Memory Expansion to 32,512 users	$599.00
EM-813-F3	HandKey Memory Expansion to 64,768 users (non field upgradeable)	DISCONTINUED
EM-823-F3	HandKey Memory Expansion to 129,536 users (non field upgradeable)	DISCONTINUED
EM-833-F3	HandKey Memory Expansion to 194,304 users (non field upgradeable)	DISCONTINUED
EM-843-F3	HandKey Memory Expansion to 259,072 users (non field upgradeable)	DISCONTINUED

Communication Options

F Series

EN-201	Ethernet Communication Module 10baseT (supercedes part number EN-200)	$411.00
MD-500	Internal 14.4K Baud Dial-Up Modem. Contact sales for international compatibility	$468.00

Card Reader & Keypad Options

F Series

PROX	Externally top mounted Proximity RF Reader Factory option only, not available for field installation	$416.00
SC-100	Integrated side mounted Mifare® Classic Smart Card Reader with external clear acrylic card holder Factory option only, not available for field installation	$1,172.00
ICLASS	Internally installed Legacy iCLASS® Reader with external clear acrylic card holder Factory option only, not available for field installation	DISCONTINUED

Outdoor Options

		F Series*

INT-HTR	Outdoor Platen Heater. Factory option only, not available for field installation** Includes 24 VDC power supply to operate HandKey	$649.00
FX-ENCL	Polyethylene with UV Resist Outdoor Enclosure (supersedes model # HURCNE)	$489.00
TX-ENCL	Metal Watertight Enclosure (supersedes model # TSNAMI)	$1,980.00

Power Options

F Series

PS-110	Power Supply. 120 VAC to 13.5 VDC with connector	$54.00
PS-220	Power Supply. 220 VAC to 13.5 VDC with connector	$65.00
BB-250	Battery Backup available only at the time of initial purchase	$109.00

^* Lead times for enclosures are subject to be extended to four weeks

^** Not compatible with the SC-100

Biometric Accessories

Network Accessories

DC-102	Data Converter for 4 wire system, RS-232 to RS-422 with 120V, 60 Hz power supply	$170.00
DC-102-220	Data Converter for 4 wire system, RS-232 to RS-422 with 220V, 50 Hz power supply	$170.00

Miscellaneous Accessories

BG-200	Demo Bag for E and F Series readers	$68.00
BR-100	5V Relay	$124.00
DS-200	Demo Stand for F Series readers	$91.00
TM-100	Table-top Secure Mount for F Series	$312.00

HandNet Software

HN-2-T1	Tier One: Up to 5 HandKeys	$958.00
HN-2-T2	Tier Two: Up to 25 HandKeys	$1,613.00
HN-2-T3	Tier Three: Unlimited HandKeys	$2,362.00
HN-T1-T2	Tier Upgrade: T1-T2 from 6 to 25 HandKeys	$1,584.00
HN-T1-T3	Tier Upgrade: T1-T3 from 6 to unlimited HandKeys	$1,668.00
HN-T2-T3	Tier Upgrade: T2-T3 from 25 to unlimited HandKeys	$1,005.00

Extended Warranty

EXT-WAR	1 year extended warranty (available at the time of initial biometrics reader purchase only)	$315.00

Training Courses and Support Services

Note: Prices are as posted. No discounts apply.

	$150.00
	per person
	$1,200.00
	per day plus
(max 10 trainees per classroom).	expenses
	$150.00
control software (HandNet for Windows and HandNet Lite) on HandKeys.	per person
SBT-HNWL-ONSITE 1-day training course at customer site. User will be able to install, program and troubleshoot the access control software (HandNet for Windows and HandNet Lite) on HandKeys	$1,200.00 per day plus
(max 10 trainees per classroom).	expenses
	$150.00
	per hour
providers with services involving the F Series handreaders. A quote for services will be provided.
	1-day training course at an Allegion facility. User will be able to install, program and troubleshoot the hardware functions of the HandKey upon completion of the course. 1-day training course at customer site. User will be able to install, program and troubleshoot the hardware functions of the HandKey upon completion of the course 1-day training course at an Allegion facility. User will be able to install, program and troubleshoot the access Schlage Biometrics Support – Support Services Professional support services to assist business partners, dealers, and solution

Main Boards

Note: Replacing any main board in the field creates a risk of the HandKey falling outside of acceptable calibration range. It is recommended that units be sent back to the factory to have the main board calibrated to the camera. Price does not include memory upgrades. Custom configurations must be noted on PO.

F Series

S-PC-HK2-RB	HandKey II Main PCB Battery Backup Ready	$847.00

Top Panels

F Series

S-TP-HK2	HandKey II Top Panel Assembly	$417.00

Power Options

F Series

Field Upgradeable Battery Backup Options

BB-200	Operational Battery Backup with power management board for reader with serial numbers below 1345000	$109.00
S-BB-BAT	Operational Battery Backup for readers with serial numbers higher than 1362000, Spare Battery for BB-250	$79.00

Overlays

F Series

OVLY HK-2	HandKey II Overlay	$75.00

Biometric Parts

Terminal Strips

F Series

		Readers built after 2003, or readers that have been upgraded to main boards with a push button reset switch.

S-TS-F02	Terminal Strip / connector 2 pin (pack of 5)	$68.00
S-TS-F03-F3	Terminal Strip / connector 3 pin - F3 (pack of 5)	$68.00
S-TS-F04-F3	Terminal Strip / connector 4 pin - F3 (pack of 5)	$68.00
S-TS-F06-F3	Terminal Strip / connector 6 pin - F3 (pack of 5)	$68.00
S-TS-F08-F3	Terminal Strip / connector 8 pin - F3 (pack of 5)	$68.00
S-TS-FPK-F3	Terminal Strip / connector pack - 2, 3, 4, 6, 8 pin (F3 Series)	$68.00

F Series Original Generation

Readers built before 2004, can be identified by a 5 position DIP switch.

S-TS-F02	Terminal Strip / connector 2 pin (pack of 5)	$68.00
S-TS-F06	Terminal Strip / connector 6 pin (pack of 5)	$68.00
S-TS-F08	Terminal Strip / connector 8 pin (pack of 5)	$68.00
S-TS-F12	Terminal Strip / connector 12 pin (pack of 5)	$68.00
S-TS-FPK	Terminal Strip / connector pack - 6, 8, 12 pin	$68.00

EPROMS

F Series

Contact technical services for assistance selecting the proper version.

S-PR-F00-F3

Platens

F Series

S-PL-F30	Complete platen assembly with antimicrobial and blue hand outline
S-PL-F	Platen overlay with antimicrobial and blue hand outline	$108.00

Keys

F Series

S-KY-F00	Spare Keys (pack of 5)	$91.00

Mounting Kits

F Series

S-RP-F00	Back Plate, rear sheet metal with hardware. Note: Serial numbers are required for a new label
S-WM-F00-F3	Wall Mount Bracket with hardware	$87.00

Shipping Boxes

S-SB-F00	F Series Shipping Box with foam inserts	$41.00

Ship Kits

S-SK-HK-2-CR	Replacement Ship Kit for HandKey II	$174.00

Cables

F Series

S-CB-232-F3	RS-232 Cable 50'	$36.00

MISCELLENOUS - TABLE OF CONTENTS
AGENCY LISTING	286
DOOR HANDING	288
SYSTEM DESIGN GUIDE	291
KEY SYSTEM SUMMARY	293
WIRING DIAGRAMS	307
BAA/ARRA COVER LETTER	311

Agency Listings

Product	Listing	Standard	Agency
M420/M420P	Builders Hardware - Aux. Locks	UL 10C/UL 1034/UL 294	UL/cUL CSFM
M450/M450P	Builders Hardware - Aux. Locks	UL 10C/UL 1034/UL 294	UL/cUL CSFM
M490/M490P	Builders Hardware - Aux. Locks	UL 10C/UL 1034/UL 294	UL/cUL CSFM
M490DE	Builders Hardware - Aux. Locks	UL10C UL294 Special Locking Arrangement including BOCA	UL/cUL CSFM
M390RFK	Builders Hardware - Aux. Locks	UL 10C UL/cUL	UL/cUL CSFM
490G	Builders Hardware - Aux. Locks (outdoor rated)
320 series M suffix	Builders Hardware- Aux. Locks	UL10C	UL/cUL CSFM
GF3000 (surface mount)	Builders Hardware- Aux. Locks	UL10C	UL /cUL
GF3000 (mortise mount)	Builders Hardware-Aux. Locks	UL10C	UL/cUL CSFM
PS902	Power Supply	UL294	UL/cUL FCC Part 15 and Rotts Compliant
PS904	Power Supply	UL294	UL/cUL FCC Part 15 and Rotts Compliant
PS906	Power Supply	UL294	UL/cUL FCC Part 15 and Rotts Compliant
900-2RS	Power Supply Option Board	UL294	UL/cUL
900-4R/900-4RL	Power Supply Option Board	UL294	UL/cUL
900-8P/900-8F	Power Supply Option Board	UL294	UL/cUL
900-FA/900-BB	Power Supply Option Board	UL294	UL/cUL
672 series All models including BRG	Access Control System Units Burglary Resistant Electric Locking Mechanism Accessory	UL294 UL1034	UL UL
692 series All models including BRG	Access Control Systems Units Burglary Resistant Electronic Locking Mechanism Accessory	UL294 UL1034	UL UL
7764 switch	Connectors and Switches Misc Fire Door Accessories	UL634 UL10B	UL-multiple listing UL-multiple listing
7766 switch	Connectors and Switches	UL634	UL-multiple listing
8200 series	Access Control Units	UL294	UL
SCAN-II-W SCAN-II-B	Access Control System Units	UL294	UL-multiple listing

Listed Electromagnetic Locks

A156.23-2010

ANSI Type Numbers Licensee's Catalog

Designations

ANSI Function Number	1500 lbf Rating	1000 lbf Rating	500 lbf Rating
E18501	M490, M490P, M390RFK	M450, M450P, 70	M420, 420P, 40
E18511	M492, M492P	M452, M452P, 72	M422, M422P
E18531	M490-TJ, M490P-TJ	M450-TJ, M450P-TJ, 70-TJ	M420-TJ, M420P-TJ, 40-TJ
E18541	M490-HDB, M490P-HDB	M450-HDB, M450P-HDB, 70-HDB	M420-HDB, M420P-HDB, 40-HDB
E08501	M490G1

1. Outdoor rated lock.

All of the above available in 12VDC or 24VDC.

E08531 M490G1

E08571 280

E08561 GF3000, GF3000TJ

E08581 GF3000, 280 E08591 GF3000, 280 E08601 GF3000BRD

Certified Finishes

Finish Type Licensee's Catalog Designations

Clear Anodized Aluminum 628 Satin Black, Anodized 335

AD-Series and CO-Series Electronic Locks

Product	Standard
AD-Series & CO-Series	UL294
	UL10C
	BHMA/ANSI 156.25 Grade 1 Operation and Security
	A156.2
	A156.3
	A156.12
	A156.13
	NFPA 101 – Ch 7
	NFPA 80 – Ch 6 & 7
	IBC – Ch 10
	ADA – Ch 4.13
	FCC Part 15
	Industry Canada (IC) RSS-210
	Florida Building Code
	RoHS

Door Handing

Door and Frame Handing Chart Door Handing from Reader Side

LEFT HAND	RIGHT HAND
Hinges on Left	Hinges on Right
Opens Inward	Opens Inward
LEFT HAND	RIGHT HAND
REVERSE	REVERSE
Hinges on Left	Hinges on Right
Opens Outward	Opens Outward

Architectural Finishes Chart

Finish Description	Finish #	BHMA #	Government
Bright Brass	605 or 666	605E	US3
Bright Chrome	625 or 672	625E	US26
Oil Rubbed Bronze, Anodized	690 or 313	690	US20A
Oil Rubbed Bronze	613 or 710	613E	US10B
Satin Aluminum, Clear Anodized	628	628	US28
Satin Black, Anodized	711 or 335	711	US19
Satin Brass	606	606E	US4
Satin Bronze	612 or 668	612E	US10
Satin Chrome	626	626E	US26D
Satin Stainless Steel	630	630	US32D
Oil Rubbed Bronze, Powder Paint	SP313
Satin Black, Powder Paint	SP335

Note: To preserve finishes, wipe clean with a soft cloth. Commercial cleaners may damage finish.

DESCRIPTION OF OPERATION
ELECTRIC LOCK	TYPE: VOLTAGE: CURRENT DRAW
OPTIONS	LOCK STATUS SW: DOOR STATUS SW
POWER SUPPLY	MODEL: VOLTAGE: CURRENT CAPACITY
OPTIONS	FIRE SYSTEM TIE-IN: STANDBY BATTERIES
CONTROL-ACCESS	TYPE:
CONTROL-EGRESS	TYPE:
MONITORING REQUIRED-DESCRIBE:_
INTERLOCK REQUIRED-DESCRIBE:

MASTER KEY

This form must be attached to the Master Key Order form and P.O.

Please provide as complete and accurate as possible so we can provide what you need for

	SYSTEM SUMMARY	Please provide as complete and accurate as possible so we can provide what you need for your Key Syste m.
Job Name Address City / State Country		Account No. P.O.#
	For detailed instructions on how to complete this form please refer to pages 4 & 5
System Overview
o New o Attached Dealer Specified Combinations	o Existing (provide info below) Registry #
	Structure or	Factory Order #
1. Select System
Schlage	Falcon
o Classic	o Standard
o Classic Primus *	o Schlage C
Everest ®	o Restricted *
o B (Small Format IC, Restricted *)	o Interchangeable Core A2
o C (Open)	o Interchangeable Core A4
o Primus® *
o D (Restricted *)
o Primus® *
		Everest 29 key sections are backwards compatible to Everest
Everest 29™ o		keyways and have the following relationships:
R (Small Format IC, Restricted *) o		R family sections > B family keyways
S (Open) o		S family sections > C family keyways
Primus® * o		T family sections > D family keyways
T (Restricted *) o
Primus® *
Type	o Yes Construction Keyed	o No
o 5-pin o 6-pin o 7-pin See compatibility chart on page 5	Full Size Construction Cores o ICA (Schlage Only)	o ICB o ICC
Keyway Specified **:	Small Format Construction Cores o Brown	o Green
	Construction Keyed Type o o CK (BOK) Falcon	o Lost Ball
** = The Commercial Master Key Department makes the final decision in the selection of key sections	o o CK (Split) Schlage	o RCK ( 5-Pin C only )

1 of 5 MS-I200

2. Select Keys & Key Stamping
Change Keys No. Of Keys per Symbol	No. Of Keys per Cylinder
Type
o Standard Bow	o Standard Bow (Unembossed)	o Access Bow (Schlage Only)	o Large Bow
Key Stamp Details
o Keyset Symbol	o Do Not Duplicate (DND)	o With Custom Die (Specify)
o Non-standard Code (Specify)
Change Key Packaging and Shipping Instructions
Pack Keys Independently (PKI) of Lock or Cylinder ***			*** = Furnished standard at no charge with Split-Key construction keying
o o Yes No
If PKI, ship change keys to:
o Dealer	o Other
o See Primus Facesheet
3. Select Cylinder Stamping
Cylinder Stamp Details
o With Industry Standard Key Symbol	o Non-Standard Code (Specify)
Cylinder Stamping Location
o Plug Face (N/A in Primus) - VKC		o Concealed (N/A in Falcon STD) - CKC

2 of 5 MS-I200

4. Select Key Quantities
Level	Qty. Per	Master Key Symbol	(s)	Total Quantity
GGM
GM
MK or RMK
Control
Emergency
Others
Ship Master Keys To:
Dealer See Primus F	acesheet 🖵 O	ther
				_
				_
Consider Franchisco	Ota - Dan			Ob . De .
Special Function	Qty. Per	- II 6' - 6 - 1 - 1'	6 1/ (611 01)	Qty. Per
RCK (Lost Ball) ****			on Core Keys (Schlage Only)
CK (Split Key) ****			on Core Control Keys (Schlage Only
Extractor Tools ****		Small Format Cons
		Small Format Cons **** = Use with Con	truction Core Control Keys
		· · · · – Use with Coi	istruction Reyling
5. Master Key Future Expa	ansion
5. Master Key Future Expa List Future MK Symbols	ansion		Approx. # of Change Key Symbol	s Under Each Future MK
List Future MK Symbols Example:		DV.		s Under Each Future MK
List Future MK Symbols		ВК	Approx. # of Change Key Symbol 40 each	s Under Each Future MK
List Future MK Symbols Example:		ВК		s Under Each Future MK
List Future MK Symbols Example: MK		BK		s Under Each Future MK
Example: MK GGM GM		BK		s Under Each Future MK
Example: MK GGM GM MK		BK		s Under Each Future MK
Example: MK GGM GM MK MK		BK		s Under Each Future MK
List Future MK Symbols Example: MK		BK		s Under Each Future MK
Example: MK		BK		s Under Each Future MK
List Future MK Symbols Example: MK		BK		s Under Each Future MK
Example: MK	BJ.		40 each	s Under Each Future MK
Example: MK	BJ.		40 each	s Under Each Future MK
Example: MK	BJ.		40 each
Example: MK	BJ.		40 each	s Under Each Future MK operated by\nese change keys
Example: MK	BJ.		40 each	operated by
Example: MK	BJ.		40 each	operated by
Example: MK	BJ.		40 each	operated by
Example: MK	BJ.		40 each	operated by

3 of 5 MS-I200

7. Instructions and Compatibility

General Information

If you do not know the registry number (R#), structure number or the original factory order number for an existing system, contact Customer Service prior to placing the order:

Tel. 1-877-671-7011 Fax 1-800-452-0663

• Only one structure may be ordered on the same purchase order
• Classic refers to Obverse, Numbered (Paracentric), Quad, and Reverse key section families
• Classic Primus refers to Primus Obverse and Primus Quad key section families

Section 1: System a System

Full Size Construction Cores

• Schlage only

Small Format Construction Cores

• 7-pin only for Schlage
• 6- and 7-pin for Falcon

CK (Split)

• 6-pin for Schlage and Falcon
• Split key construction keying is not available for Classic Primus or Everest 29 Primus

RCK (Lost Ball)

• 5-pin (C keyway) only for Schlage
• 5-, 6-, and 7-pin for Falcon

System Selection

• Refer to the compatibility chart

Section 2: Select Kys and Key Stamping

Stamp Details

• Unless otherwise specified, industry standard key symbols are stamped on Everest 29™ and Primus® keys
• For custom die, attach RFQ approval for Schlage

Section 3: Select Cylinder Stamping

Type

• For cylinder type refer to the compatibility chart

Keyway (specify)

• Schlage Commercial's default key section for new Master Key Systems is Everest™ S145

Section 4: Key Quantities

Level

• Unless otherwise specified, the control key has the same cut as the highest-level key in the system (Except SFIC systems)

Special Function

• Construction keys are not furnished unless specified

Change Keys

• Unless otherwise specified 2 change keys are furnished per lock or cylinder

Section 5: Master Key Future Expansion

• Do not use the letters "I", "O", "CK", "KA, or "KD" for any master key symbols

Section 6: Operating Instructions

• Cross keying reduces the security and expansion of key systems
• Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders

Compatibility Chart

	5 Pin	6 Pin	7 Pin	Split Key	Block O-Key	Lost Ball	Tempe Core	A2	A4	0.025	0.018
Schlage
Classic	X	X		X		X	X
Everest 29 S		X		X			X
Everest 29 T		X		X			X
Everest 29 R			X				X	X
Classic Primus (XP)		X					X
Everest 29 Primus (XP)		X					X
Falcon
Open	X	X	X		X	X					X
Restricted		X	X		X	X				X
Schlage C		X		X
SFIC Open		X	X				X	X	X
SFIC Restricted		X	X				X	X	X

MASTER KEYED ORDER

This form must be attached to the MASTER KEY SYSTEM SUMMARY FORM

Excel Soft copy - Print Instructions: To avoid printing more sheets than needed, Select <Print>, from the print screen select <Print range>, then select <Pages> from ____________________________________

									Please prov	ide as complet rovide what yo	Please provide as complete and accurate as possible so we can provide what you need for your Key System	as possible so w (ey System		, then select < Pages> fromto& click OK.
Quote #:					Accol	Account No.:					P.O. #:
Shipping Instructions:	structions:				Mark	Mark Cartons:					Date:
Order Written By:	en By:				Custo	Customer Name and Address:	and Address				Ship to:
For Further Name: Phone:	For Further Information Contact: Name: Phone:	Contact:
Бах:
	Items Ordered	p;	TUO	OUTSIDE		INSIDE	DE		i H	r)		Enter	Dimen-
	Lock Details	S	DESIGN	FINISH		DESIGN	FINISH		LAICH	SI KIKE	Enter door	when	sion for
Key	Key/Label Instructions	ctions			HAND (Only one hand per line item)				\ \ !		tnickness if not standard	thickness is greater/equal to 2″	mortise cylinder, blocking ring, etc.	ADDITIONAL DETAILS
LINE	QTY	PRODUCT				ŲΤΥ	Heading	D00R#	Symbol- (s)	Symbol- (s)	DRTHK	ЕХТ	MIO
								_		_

Sample Letter of Authorization For All Restricted Key Products

End User Letterhead - REQUIRED

District 10 Schools 555 Main Street End User City, State 55555 (555) 555-5555

Jones Elementary School is to be keyed using a new Everest D Restricted Key System. For security reasons, we would like to have all keys for this facility shipped to a location other than the job site. Master keyed products, however, can be shipped directly to the site. This letter authorizes Schlage to ship our restricted products to the following addresses:

These two addresses above serve as our only authorized shipment addresses for all orders placed for our facility. We understand that this letter will be kept on file and referenced for our future orders and that a new letter is only required to add, remove, or change authorized shipping locations.

End User Representative Signature REQUIRED Letter may be mailed or faxed to Schlage Schlage Restricted Order Processing 3899 Hancock Expressway Colorado Springs, CO 80911

Wiring Diagrams

A library of common wiring diagrams are available at no-charge for use in single and double door applications utilizing various configurations of Allegion door hardware products. These diagrams can be accessed through our Knowledge Center tool at http://kc.allegion.com/ . Click on Common wiring diagrams located under the column Top Solutions.

Custom Wiring Diagram Request

When common wiring diagrams do not meet the needs of the job requirements Allegion offers a service to purchase custom wiring diagrams. All custom wiring diagrams include a point-to-point with theory of operation and a riser diagram. Custom wiring diagrams fall into two categories; Standard and Complex:

• ⁿ Standard drawings : All Allegion products with a single opening and a basic theory of operation. These drawings are quoted on a per drawing basis.
• ⁿ Complex drawings : Generic contacts, 3rd party components, complex relay logic, timer circuit logic, any other additional advanced logic. These drawings must be processed through a quote process to determine the total NET cost of the request.

How does the Custom Wiring Diagram Request Process work?

• ⁿ Custom wiring diagrams can only be ordered by and shipped to current Allegion Channel Partners
• ⁿ Obtain a Wiring Diagram Request Form on page 309 or email a request to Wiring.Diagram.Request@allegion.com
• ⁿ Email the completed request form to Wiring.Diagram.Request@allegion.com
• ⁿ Be sure and include the following information to prevent delays to the request:
  • All supporting documentation for non-Allegion products
  • Hardware list with complete part numbers
  • Detailed Theory of operation for all openings
• ⁿ Upon receipt the custom wiring coordinator will review and clarify the request as needed
• ⁿ Once all clarifications are resolved a QUOTE#, NET pricing, and lead time will be assigned and communicated to the requestor within 1 business day
• ⁿ Drawings that fall under a Standard type will be quoted a NET $250 for each drawing
• ⁿ Drawings that fall under a Complex type will receive a NET quote depending on the time required to complete the drawings at an hourly rate of $250/hour
• ⁿ A purchase order with the QUOTE# must be received for the wiring diagrams to be produced
  • Send the completed PO to Wiring.Diagram.Request@allegion.com
• ⁿ Lead time is generally 2-3 weeks from time PO is received, more complex requests will have longer lead times
• ⁿ Changes to the original request after a quote approval may incur additional charges and affect lead time
• ⁿ QUOTE# is valid for 90 days
• ⁿ Custom wiring diagrams, once completed, will be emailed to the requestor

Wiring Diagram Request Form

Must be a Schlage Electronics, LCN, or Von Duprin Dealer

Date//	Project Name
Dealer/Distributor
		Account # Dealer Contact Name Phone
Provide a Primary Technical Contact	Phone
	Provide/Attach the Following
	n All supporting documentation for all non-Allegion products.
	n Included hardware list with complete part numbers.
	n Detailed Theory of Operation for all openings.
	Additional information that helps expedite the project:
	Door Number; Door Size; Door Material;
	Fire Rated Opening; Single/Pair; Double Egress; Interior/Exterior;
	Interlocked Opening; Basic Floor Plan/Traffic Flow

E-mail completed form and supporting documentation to

Wiring.Diagram.Request@allegion.com Phone: 877-671-7011

About Allegion

Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises 27 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®.

For more, visit www.allegion.com