2020 LCN Price Book

Open the original PDF document

Included is the LEGACY FORMAT of the price book for your reference only.

This format will be discontinued in the future pending the feedback and refinement of the new price book format.




	Price book 8 Effective April 4, 2020 - Rev. 04/20

This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.

Administrative Offices

Allegion Administrative Office 11819 N. Pennsylvania St. Carmel, IN 46032 allegion.com/us

Placing orders

You can place orders with Allegion via the fax number or email listed below:

Fax#: 1-800-248-1460

Email: allegion_orders@allegion.com

Customer Care

Our Customer Care Representatives are available for questions or assistance. You can reach them at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for RSO) or through the email addresses listed below:

Sales Support

support@allegion.com

Technical Product Support

Closers

Closers_TechProdSupport@allegion.com

Request for Quote

Carolinas

(North Carolina, South Carolina, Virginia) Carolinas.Ouotes@allegion.com

Central

(Arkansas, Illinois, Iowa, Kansas, Missouri, Nebraska, Oklahoma) Central.Quotes@allegion.com

Chicago

(Illinois-Northern, Wisconsin) Chicago.Quotes@allegion.com

Florida

Florida.Quotes@allegion.com

Great Lakes

(New York, Pennsylvania) GreatLakes.Quotes@allegion.com

Metro New York

Metro.Quotes@allegion.com

Michigan

Michigan.Quotes@allegion.com

Mid Atlantic North

(New York, Pennsylvania) Mid.Atlantics.north.guotes@allegion.com

Mid Atlantic South

(Delware, Maryland, New Jersey) Mid.Atlantics.south.quotes@allegion.com

Midwest

(Indiana, Kentucky, Ohio, West Virginia) Midwest.Quotes@allegion.com

Mountain States

(Colorado, Idaho, Montana, Nevada, Utah, Wyoming) Mtn.States.Quotes@allegion.com

New England

(Connecticut, Main, Massachusetts, New Hampshire, Rhode Island, Vermont) NewEngland.Quotes@allegion.com

North Central

(Minnesota, North Dakota, South Dakota) NorthCentral.Quotes@allegion.com

Northern California

NoCal.Quotes@allegion.com

Northwest

(Alaska, Oregon, Washington) Northwest.Quotes@allegion.com

South

(Alabama, Georgia, Louisiana, Mississippi, Tennessee) South.Quotes@allegion.com

Southern California

(California-Southern, Hawaii) SoCal.Quotes@allegion.com

Southwest

(Arizona, New Mexico) Southwest.Quotes@allegion.com

Toyac

Texas.Ouotes@allegion.com

Contact Information 2	Control Box Components28-29
Table of Contents/How to Order 3	Actuator/Sensors Quick Find Guide30-31
Available Finishes/SRI4	Actuators, Sensors and Accessories 3249
Order Form5	Parts & Accessories50-63
General Terms6-9	Senior Swing Diagram 64
Door Closer Specialists10	Benchmark Diagram65
Complete Door Closers11-23	Glossary of Abbreviations 66
Magnets24	Wiring Diagrams67
Specialty Products, Fasteners25	Wiring Diagram Request Form 69
Control Boxes 26-27	LCN Warranty71

HOW TO ORDER CLOSERS, COMPONENTS, PARTS & ACCESSORIES

1. Identify the closer series; 1460, 2030, 4040XP, 4210T, 4310ME, 4640, 6030, etc.
2. Determine if any additional information is required, such as: handing, finish, spring size, voltage, etc.
3. Order the material using suffix number with the description and include all necessary information. Examples: 4111 Closer x RH x CUSH x AL or 4040SE Closer x 24v x DKBRZ
4. For additional information on how to order specific closers, please see the 'How to Order' page in each individual closer section of the LCN General Catalog or call LCN Customer Care .

SPECIAL NOTES

1. All RAL custom finishes will be powder coated and metal covers ( list add $10 for most series, list add $30 for 1450 and 4050A series ) will be substituted for standard covers for all closers except the 1460 series. 1460 series closers may be custom finished but a DS cover ( list add $30 ) must be selected.
2. LCN offers more than 180 RAL custom finishes. There is a list add of ( $40 ) per closer for an RAL finish. Most series require a metal cover ( MC ) ( $10 add ). LCN also offers a Brite Metallic ( MTLPC ) powder coat finish. There is a list add of ( $60 ) per closer for the MTLPC finish.
3. LCN plated list prices already include -72MC (1460 includes -72DS). Disregard the additional list add for metal cover ( MC ).
4. LCN powder finishes exceed ANSI/BHMA standard A156.4 for corrosion resistance by at least a factor of four. LCN powder coat finishes combined with the LCN Special Rust Inhibitor ( SRI ) pre-treatment exceed this standard even further.
5. Special Rust Inhibitor ( SRI ) is a pretreatment that is applied prior to the LCN powder coat finish and greatly exceeds ANSI/BHMA Standard A156.4 for corrosion resistance. LCN requires an additional ( list add $40 ) charge per closer, component or part.
6. LCN plated finishes exceed ANSI/BHMA standard A156.4 for corrosion resistance.
7. Optional TORX security screw packs can be substituted for standard screw packs on most closers. See ' Add for TORX Screw Pack ' for additional charge. In some cases, not all fasteners can be provided as TORX , consult factory for details.
8. LCN can mark individual closer boxes with door or opening #'s. Please specify 'itemized' when ordering. Markings (e.g., door number, stock reference numbers) on individual product cartons will be provided with no charge.
9. Special Template ( ST ) pricing is available by contacting LCN Technical/Product Support or LCN Customer Care.
10. All closers conform to standards UL10C and UBC 7-2 (1997).
11. If an item or price is not listed in the LCN April 4, 2020 Price List , consult factory for availability & pricing.
12. Prices listed in the LCN April 4, 2020 Price List are subject to change without notice. The current 'Terms of Sale' applies.

Powder Coated Finishes

LCN closers can be specified in six standard or over 180 custom powder coated finishes. Powder coating provides superior protection against the effects of weathering and provides a durable, chip resistant finish. For information about custom finishes, plated finishes and a special rust inhibiting (SRI) process, see the LCN General Catalog.

Standard Powder Coated Finishes

See LCN General Catalog, page 5 for exact colors.

AL (BHMA 689) Aluminum
DKBRZ (BHMA 695) Dark Bronze
BRASS (BHMA 696) Brass
LTBRZ (BHMA 691) Light Bronze
STAT (BHMA 690) Statuary
BLACK (BHMA 693) Black

Optional Custom Powder Coated Finishes

180 Custom Finishes (contact customer service for availability)
Superior Appearance
Environmentally Friendly Process
Durable and Chip Resistant
Corrosion Resistant
Match Doors, Frames, and Hardware

Optional SRI

When powder coated closers are installed in high humidity or potentially corrosive installations like swimming pools, water treatment facilities or near large bodies of water, specify LCN SRI Pretreatment. This optional process extends the corrosion protection offered by powder coat finishes.

Optional Plated Finishes

LCN offers 7 plated finishes at additional cost: US 3, US 4, US 10, US 11, US 15, US 26 and US 26D

For a list of available BAA/ARRA compliant products please contact your local RSO or sales representative to see the BAA/ARRA catalog.

ORDER FORM

Sold To:	Purchase Order #
	Purchase Order Date
	Requested Ship Date
	Project Name
	Shipping Instructions

Ship To:		THIS SPACE FOR FACTORY USE ONLY
	Acct #	WOG - Y / N
	Quantity	PL
	Ship Date	Inv #
	Itemize Code 1 _ 2 _ 3	Verify

		Arm Type		Hand		Finish
QTY	Closer Series	or Part #	Description As Listed in Catalog or Parts List	RH	LH	Painted	Plated

Orders can be faxed to (800) 248-1460 or emailed to Order_LCNClosers@allegion.com

Allegion General Terms and Conditions of Sale and Service

1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by which Company will quote and sell Deliverables to Customer; (b) The terms "purchase order" or "order" for the purposes of this Agreement include the term "request for quotation," as appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions set forth in any purchase order issued by Customer; (d) No reference herein to Customer's purchase order will in any way incorporate different or additional terms and conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER'S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER'S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part, for any reason.

2. ORDERS.

a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver to Company a purchase order. All such purchase orders must (i) be in a written format acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include Customer's account number, invoice address, ship to address, shipping method, shipper's letter of instruction for international shipments, part number, pricing, and designated contact information, (v) include, if applicable, any special configuration ID numbers, necessary programming information, special factory instructions, and requested specifications regarding a particular finish, handing, design, backset, or strike, (vi) reference any applicable pricing discounts under an ongoing buying program or based on a written quote from Company, along with the applicable buying program number or quotation number, and (vii) not combine buying program and quoted product on the same order.

b. Minimum Orders. In the event the order value does not meet any required minimum net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a requirement for one order shall not constitute a waiver of the requirement for any future orders.

c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of each purchase order issued in accordance with this Agreement, and (ii) notify Customer whether Company accepts or rejects the purchase order. If Company fails to accept or reject a purchase order within a reasonable time period, such failure to respond will be deemed a rejection of the entire order. Orders that combine buying program and quoted product on the same order will be routed back to your local RSO office in order to review subject purchase order.

d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order changes and cancellations are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided herein, Customer acknowledges that (i) requesting a Change Order may cause a delay in the scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii) Orders may not be changed after 48 hours of Company's order acknowledgment; (iii) After 48 hours of Company's order acknowledgment, all changes to an accepted purchase order will be subject to a Change Order charge of 25% of the net Deliverable value, plus the cost of labor and fabrication or raw material that Company incurred prior to the receipt of the Change Order from Customer, or that may be required due to the Change Order; (iv) the requested change may result in additional charges for labor, fabrication, and raw material, and (v) if Customer cancels an order or portion of an order that includes Deliverables that have been manufactured and prepped for shipping, a 45% restocking fee will apply. Notwithstanding the foregoing, Customer cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom or nonstandard items once they have been placed. All cancelled orders for a Non Recurring Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to a cancellation charge of 100% of the acknowledged price.

e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, including discounts, on an individual basis.

f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested by Customer within 24 hours of Company's order acknowledgment if the order has not shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested by Customer if the order has not shipped and if the request is made to Company within 48 hours of Company's order acknowledgment. Return Material Authorization (RMA) for Deliverables must be processed through Fast Track Customer Service.

g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without penalty only if made within 48 hours of Company's order acknowledgment, and provided that the order has not shipped. Some exceptions do apply – please consult the factory. Changes are not allowed on Rapid Program orders after the order has been entered and acknowledged. After 48 hours of Company's order acknowledgment, all changes or cancellations are subject to a charge of 25% of the order. Unless otherwise specified by Company in writing, any changes to orders acknowledged by Company that affect the delivery date will be deemed a new order and will require acknowledgement by Company as provided in this Section. Additional products, features, terms and conditions regarding the Rapid Program are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

3. PRICES, INVOICES AND PAYMENT.

a. Prices. The prices in Company's Price Book are subject to change at any time, without notice to Customer. Company may charge Customer additional amounts if Customer requests special packing, marking, shipment, product modification, or engineering services. Oral prices specified by Company are null and void. Quote numbers must be referenced on Customer's purchase order in order for the Company's quoted pricing to apply. Orders that do not reference a quote number will receive buy program pricing or book net pricing. Quoted prices are for those specific products quoted for a specified job, and are subject to the Price Book in effect at the time Company receives the order.

b. Taxes. Prices do not include any present or future federal, state or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith. Any taxes, charges, or duties imposed by any governmental authority on the sale of Deliverables will be paid by Customer, in addition to the selling price specified by Company. Credits for U.S. sales tax applied to invoices will only be granted if valid exemption documentation is provided within 30-days of the invoice date and a case is initiated by customer service. Exemption documentation may be emailed to sales.tax.certificates@allegion.com, this e-mail address cannot be used to request a credit for sales tax charged all such requests must be made with customer service. All certificates sent to the e-mail address must include the following information: (1) Customer account number(s); (2) Customer name; and (3) Allegion brand(s) the certificate should be applied to.

c. Payment Terms. Company will deliver to Customer an invoice with each shipment of Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice date (subject to any early pay discounts that may be offered to Customer by Company in its sole discretion). Customer will make all payments in United States dollars. Past due invoices will be subject to a late payment service charge of 1.5% per month on any overdue unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law, whichever is less. Customer shall reimburse Company for all costs of collection, including, without limitation, reasonable attorneys' fees, for any overdue amount owed by Customer to Company, and such collection costs shall also be subject to interest charges.

4. QUOTATIONS.

a. Project Quotations. Project or new construction quotes are restricted to the specific project quoted for the quantities, finishes, and series of Deliverables referenced on the quote. Company reserves the right to require proof of sale of Company products for any quoted project.

b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the following: i) Stocking of the Customer's shelves for small, quick-turn, discretionary projects, or ii) Sale to a general contractor or installer for new construction. Stock quotations may not be used for any project containing any Company no-substitution, specified products. Deliverables purchased under Stock Quotations cannot be redistributed to other Customer branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over the counter to any walk in trade.

c. General. All quotes are subject to this Agreement, unless otherwise specified by Company, and are subject to change at any time prior to Company's acceptance of a purchase order referencing the applicable quote number. Company, its representatives and employees reserve the right, in their sole discretion and for any reason, to refuse a Customer's request to quote a price other than the standard list price, regardless of whether Company or its representatives or employees have previously quoted discounted prices to the Customer on some or all of its orders. Customer's failure to comply with this Section 4 will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase orders and/or Customer's ability to distribute Company's products.

5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase money security interest and lien on any and all of Customer's rights, title and interest in each Deliverable sold by Company to Customer, wherever located, until the invoice for the applicable Deliverable(s) is paid in full, including any late charges and costs of collection. Customer authorizes Company to, and will assist Company in, taking all necessary steps to perfect and maintain Company's interest in such Deliverables.

6. CREDIT TERMS. . Unless Customer pre-pays all of its purchase orders in advance, its purchase orders will be subject to the credit limit and other terms of credit ("Credit Terms") set forth in Company's credit application, which Credit Terms Customer acknowledges are subject to change by Company at any time. Company reserves the right to request payment in advance of shipment or any order or to request adequate assurances for Customer's payment of an order and may withhold or stop shipment, without any liability to Company, until Customer submits payment or adequate assurance of payment.

7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company products in support of Company-written specifications and will maintain sufficient inventory to adequately support End Users, installers, and/or general contractors' needs. Company may implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure to comply with such program(s) will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase order and/or Customer's ability to distribute Company's products. Customer shall, at its own expense, gain and maintain sufficient knowledge of the industry and products competitive with Deliverables so as to be able to (a) explain in detail to End Users, installers, and/or general contractors the differences between the Deliverables and competing products, (b) ensure that an adequate number of trained, capable and qualified technical personnel with sufficient knowledge of the Deliverables and who have obtained all necessary licenses and permits are available to assist End Users, installers, and/or general contractors, and (c) respond to such End Users, installers, and/or general contractors with respect to the general operation and use of the Deliverables including, but not limited to, (1) acting as a liaison between the End Users, installers and/or general contractors and Company in matters requiring Company participation, (2) providing general product information and configuration support on standard protocols and features, (3) collecting relevant technical problem identification information, and (4) posting and distributing any warranty information concerning the Products in accordance with Company's instructions. Customer is responsible for all service and support resulting from the re-sale of any Deliverable to End-Users, installers and/ or general contractors, examples of which may include, but are not limited to, support activities such as installation, initialization, software set-up, training, trouble-shooting, technical support and field service. In the event Customer is unwilling or unable to perform said support activities, Company reserves the right to recover from Customer any and all expenses incurred by Company to resolve the afore-mentioned End-User, installer and/or general contractor issues. Technical product training is recommended for Customer in order to fully service and support Deliverables purchased from Company that are resold to End-Users, installers and/or general contractors.

8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase order or other contract with Company, Company shall have the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to defer further shipments under that or any other purchase order until such default is corrected and to declare all outstanding bills of Customer to be immediately due and payable.

9. INSPECTION AND DELIVERY.

a. Inspection. Customer will inspect all Deliverables immediately after receiving them. Customer will be deemed to have accepted the Deliverables unless Customer notifies Company in writing of any nonconformance within 10 days of delivery and provides Company written evidence reasonably documenting that nonconformance. Inspection of Deliverables at Company's facility is not permitted.

b. Delivery. Delivery schedules for Deliverables are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Delivery schedules for services are based upon Company's prompt receipt of, and prompt access to, Customer's equipment and all information necessary to complete the services. In no event will any delivery date be construed as falling within the meaning of "time is of the essence." Partial delivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery shall constitute a separate sale, and payment shall be separately made when due. If any part of a delivery hereunder is not delivered by Company in accordance with Customer's purchase order, this Agreement shall not be affected thereby.

10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer is located in the United States, all Deliverables will be sold "Uniform Commercial Code, FOB Origin, Company's factory"; and (ii) where the Customer is located outside of the United States, all Products will be sold "Ex-works, Company's factory (Incoterms 2010)." In either instance, title and risk of loss will pass to Customer upon delivery to the carrier at Company's factory, provided, however, as set forth herein, Company shall retain a security interest in the Deliverables until full payment has been made therefore, and Customer agrees, upon request, to do all things and acts necessary to protect Company's interest by adequately insuring the Deliverables against loss or damage from any cause and to have Company named as an additional insured. Customer will promptly provide Company with a copy of the relevant certificate of insurance upon Company's request.

11. SHIPPING.

a. Freight Charges. Company will ship all Deliverables in accordance with Company's freight shipment guidelines, which are set forth on the My Allegion Portal ("Freight Shipping Guidelines"), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN.
b. Rush Charges. Expedited order options are available as set forth in Company's Freight Shipping Guidelines.
c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its standard procedures for shipment, unless the parties agree, in writing, that Company will comply with any special instructions provided by Customer. Special instructions may result in an increased price.
d. International Shipments. For all international orders, a Shipper's letter of instruction must be submitted in writing with the order. Failure to do so will result in the order being rejected. Complete adherence to this order requirement will be strictly enforced. Company will not be held liable for any charges resulting from delays due to lack of complete required information being supplied.
e. Once received by the Company, a purchase order cannot be combined with any other order to increase average order size as it relates to Company's Freight Shipping Guidelines. However, for orders placed under Company's FastTrack 24 Hour/5 Day Program (available for Schlage, Von Duprin, LCN and Glynn-Johnson products); ii) FastTrack 24 Hour/3 Day Program (available for Ives products); or ProExpress (available for specific product lines stated in the ProExpress price book for Falcon, Ives, Glynn Johnson, LCN, Schlage and Von Duprin products), the applicable brands or product categories may, subject to certain order requirements identified by Company, be combined on a single order to increase average order size used in Company's Freight Shipping Guidelines.
12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days from the date of delivery; (iii) All claims for damage to Deliverables (while in the care, custody, and control of Company) must be submitted within thirty (30) days from the date of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/or control of a carrier will be the responsibility of Customer, unless otherwise agreed by the parties.
13. PRODUCT CHANGES. Company's product policy is one of ongoing update and revision, and accordingly, Company reserves the right to change, without notice, the design of, or the process of manufacturing, the Deliverables covered by this Agreement.
14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable in any manner contrary to the manner in which the Deliverable is intended to be used; and/or (ii) not to modify the design of any Deliverable for use with another product without the prior written consent of Company.
15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables that are correctly furnished by Company per the purchase order may not be returned unless Customer receives written authorization from Company. If returns are authorized by Company, a return merchandise authorization ("RMA") number must be provided by Company. Deliverables identified under such RMA must be returned to Company within 90 days of issuance of the RMA. Such RMA number and any accompanying RMA documents, the original invoice number, and a written explanation for the return must be included with the returned Deliverables in order for Company to inspect and approve a credit for the return. For warranty returns , a credit in the amount of the original purchase price will only be issued if, after Company's receipt and inspection of the returned Deliverables, Company confirms, in its sole discretion, the defect is valid and approves the return. For non-warranty returns/convenience returns , in the event Company approves such a return, in its sole discretion, the following shall apply: (a) the total amount of Deliverables requested to be returned shall be a minimum of $250.00; (b) a credit will be made to Customer's account in the amount of the original purchase price less freight and a handling charge of 45% of the net material on the original invoice; and (c) only Deliverables that are new, current, standard, non-obsolete, non-specially manufactured, unused, in their original condition as at the time of sale by Company to Customer, in their original packaging and in Customer's inventory less than 180 days from the date of shipment by the Company, and not ordered as part of a master key solution may be considered by Company for return. Such credit will only be issued if, after Company's receipt and inspection of Deliverables, Company approves the return. The amount of final credit will be determined upon receipt at the factory and following Company's inspection and analysis of the condition of the returned material. Company retains the right to deny credit to anyone for any reason.

16. CONFIDENTIAL INFORMATION.

a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of the Company except for the purpose of performing its obligations under this Agreement or exercising the rights granted herein (the "Purpose"). Customer shall protect Confidential Information of the Company from disclosure and unauthorized use in the same manner that it protects its own Confidential Information, but in no event shall such standard of care be less than reasonable care. Customer may disclose Confidential Information of the Company only to its employees who require such information for the Purpose and who are subject to confidentiality obligations at least as protective as those set forth herein.
b. Proprietary Information and Advice. (a) All designs, data, and specifications provided by Company are proprietary and may not be disclosed or reused by Customer without the prior written consent of Company; (b) Company assumes no obligation or liability for any advice given by Company, the results obtained, or damages incurred as a result of such advice, and all such advice is given and accepted at Customer's risk.
c. Return. Upon the termination or expiration of a purchase order or this Agreement or upon the request of the Company, the Customer agrees to end all further use of, to immediately return to the Company the original version of, and to delete or destroy all copies of, any and all Confidential Information of the Company.

17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a) use Company's name in any form of publicity; or (b) use, create, register or market, directly or indirectly, in whole or in part, Company's names, logos, brands, or any other trademarks, or names that are now or may hereafter be owned by Company, as part of Customer's corporate or business name, as part of an internet domain name, uniform resource locator (URL), or in any way connected with Customer's business, trade address or other designations. Upon termination of this Agreement or upon the request of company for any reason, any use of Company's trademarks or names will be immediately discontinued.

18. LIMITED WARRANTY.

COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN COMPANY'S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTS EACH APPLICABLE PURCHASE ORDER ("LIMITED WARRANTY"). THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A HARD COPY OF THIS WARRANTY UPON CUSTOMER'S WRITTEN REQUEST. IN THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OF THE DELIVERABLES. COMPANY'S SOLE OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY'S OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE.

a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A) are not the proper size for the application; (B) are not installed in accordance with Company's published installation instructions; (C) are installed with improper or incorrect parts and/or are used for purposes for which they are not designed or intended; (D) have been repaired or altered without the Company's prior written consent; (E) have been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored, installed, maintained or operated; (G) have been used in violation of written instructions provided by Company to Customer; (H) have been subjected to improper temperature, humidity, or other environmental conditions, or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited Warranty do not apply to any defects or issues with the design or performance of equipment or products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection or construction of any goods. Company is not responsible for loss or damage resulting from use of Deliverables in conjunction with parts or systems not manufactured by Company. Accessories or products furnished by the Company, but manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed to Customer.
b. Services. Company warrants that its services will be free from defects in material and workmanship for a period of 12 months from the date of completion of the particular items of service. Company's sole obligation under this service warranty is limited to repair or reperformance, at its option of the service, provided however, if repair or reperformance is either impractical or impossible, the Company will refund to Customer that portion of the price paid to Company for any defective service, provided written notice of the defect or nonconformance is provided by Customer within 30 days of discovery of the nonconformance.
c. Notification. Customer agrees to immediately notify Company in writing if any claim is made against Customer for any damages caused by any modules, parts, products, service or other Deliverables which may be the direct result of any defect in the manufacture of such aforementioned products. Customer agrees to cooperate with Company and its counsel in the defense of such claim and Customer agrees not to settle such claim without Company's written consent. If Customer fails to notify Company of such claim or fails to cooperate in such defense as aforesaid, then Company shall be discharged from any obligations under this Section and shall have no further liability to Customer.
d. Exceptions. The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables or other manufacturer's products; (ii) shipping and freight expenses required to return Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in Company's material (products only) or workmanship.

19. LIMITATION OF REMEDIES.

CUSTOMER'S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A) SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY'S OPTION. IN NO EVENT WILL THE COMPANY'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY'S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.

20. INDEMNIFICATION AND LIMITATION OF LIABILITY . a. Customer shall indemnify, defend and hold Company, and its officers, directors, employees, customers, Affiliates, suppliers, users and agents, (collectively the "Indemnitees") harmless from and against any and all damages, claims, losses, expenses, costs, obligations, liabilities, including without limiting the generality of the foregoing, liabilities for court costs and attorneys' fees, suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss to any person, or injury to any property (collectively, "Damages"), received or sustained by any person(s) or property, arising out of, occasioned by, attributable or related to i) any breach of any representation or warranty made by Customer, its officers, directors, employees, affiliates, users, agents, representatives or customers to Company or any third party, (ii) any failure by

Terms and Conditions

Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim by any third party relating in any way to the obligations of Customer and/or the Deliverables sold by Company to Customer hereunder. Customer shall not consummate any settlement of any indemnified claim without the Indemnitees' prior written consent. Customer's obligation to indemnify Indemnitees will continue in full force and effect notwithstanding the termination or expiration of any order under this Agreement. In any claim against an Indemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly employed by any of them or anyone for whose acts they may be liable, the indemnification obligations set forth in this Section shall not be limited in any way by or for Customer or any subcontractor under any applicable worker's compensation act, disability or other employee benefit act, or insurance coverage. This provision shall survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY'S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER'S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty to the Customer that the Deliverables shall not infringe any intellectual property rights including, without limitations, claims arising from patent, copyright, trademark, trade secret, or other intellectual property infringement. Customer agrees to hold Company harmless from and defend the Company against any such claim of intellectual property infringement, including any Damages resulting from that claim, the cost of complying with any preliminary or permanent injunction, and all other costs of defense (including the attorneys' fees and costs), in connection with the foregoing.

c) To the extent that applicable law does not permit any limitations set out in this Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or willful misconduct. The limitations of remedy and liability herein shall not be interpreted to affect Company's obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this Agreement. Further, the limitations of remedy and liability herein shall not be interpreted to limit Company's or Customer's right, if permitted by applicable law, to assert a claim for contribution among joint tortfeasors in connection with a claim by a person who is not a party to this Agreement.

21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standards are tested and performed by third-party independent laboratories. Any field modification or alteration of certified Deliverables will void certification and Company is not liable to Customer to certify any modified or altered Deliverable.
22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

23. CONSUMER PRODUCTS

WITH RESPECT TO "CONSUMER PRODUCTS" AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT ("MMWA"), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C) SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR LOCATION TO LOCATION.

24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its obligations hereunder will be excused to the extent that it is caused by an event or occurrence beyond Company's control such as, by way of example and not by way of limitation, acts of God, acts by any governmental authority (whether valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and slowdowns) at Company's facility, its source plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery date will be extended for a time equal to that of the delay and the schedule for Company's performance will be deemed adjusted to that effect.
25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the attachments, exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entire agreement between Company and Customer with respect to the matters contained herein and supersede all previous communications, representations, or agreements, either oral or written between Company and Customer. No agreement or understanding varying or expanding this Agreement will be binding upon either party unless it is in writing and signed by a duly authorized representative of each party hereto.
26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any agreement, or any part of an agreement or the various documents (including, but not limited to, electronic documents) between Company and Customer, unless the parties agree otherwise in writing, the various components of the agreements shall be given the following precedence (in descending order of precedence): a) any master agreement or long term agreement between Company and Customer; b) any specific terms, conditions and/or warranties of the individual products or Deliverables; c) the terms and conditions of this Agreement, and d) any purchase order.
27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT. Customer shall furnish Company with statements evidencing Customer's financial condition as Company may, from time to time, reasonably request, and shall notify Company immediately of any and all events that may have a material adverse effect on Customer's business or financial

condition. If Company determines, in its sole discretion, that Customer's financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to Company's other rights, Company may without liability or penalty, take any of the following actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to Customer; or (iv) any combination of the above.

Company may immediately terminate an order from Customer by giving written notice to Customer in the event of the happening of any of the following or any other comparable event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an assignment for the benefit of creditors by the Customer, all of which will allow Company to demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to trade; (vi) Company determines that Customer does not meet or no longer meets the credit requirements of Company or Customer's credit account is closed; (vii) any Customer violation of law, specifically including, without limitation, those laws set forth in this Agreement.

In the event of termination in accordance with this section, Company will not be obligated to accept any existing or additional orders from Customer and Company will be released from its obligation to deliver under orders accepted prior to such termination. The rejection or termination of any order by Company will not entitle Customer to any termination or severance compensation, or to any payment in respect to any goodwill established by Customer, or render Company liable for damages on account of the loss of prospective profits, or on account of any loss, expenditure, investment or obligation incurred or made by Customer.

No action taken under this Section 27 by Company (nor any failure of Company to act under this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer's obligations, including the obligation of Customer to make payments as required under this Agreement. Upon termination of any order, all amounts owed by Customer to Company will become immediately due and payable, whether or not otherwise then due or payable.

28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit risks with respect to, and for collecting payment for, all Deliverables sold to third parties (including End Users, installers, and/or general contractors) whether or not Customer has made full payment to Company for such Deliverables. The inability of Customer to collect payment for any Deliverable shall not affect Customer's obligation to pay Company for any Deliverable.
29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this Agreement shall be governed by and construed according to the laws of the State of Indiana (excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations Convention on the International Sale of Goods. Any disputes or claims shall be instituted and maintained in the courts of the State of Indiana. Customer consents to the exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any action arising from or relating to this Agreement. Customer agrees to pay for all expenses (including, but not limited to, collection costs, court costs and attorneys' fees) incurred by Company in enforcing the obligations of Customer under this Agreement.
30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document creates an employment, partnership, joint venture, or agency relationship between Company and Customer, including that of franchisee/franchisor. No party will have any power or authority to enter into any commitment on behalf of or otherwise bind the any other party on any matter. No employee of Customer will be deemed to be an employee of Company. If any provision of this Agreement is deemed to create a franchise relationship or business opportunity between the Parties, then Company may terminate any purchase order or this Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to effect the original intent of the Parties as closely as possible in a mutually acceptable manner in order that the transactions contemplated hereby are consummated as a reseller agreement and not a franchise or business opportunity agreement.
31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts which become payable to Company under this Agreement or otherwise. Company will not accept responsibility for backcharges for the cost of material or labor by Customer or any third party.
32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties expressly agree to electronic transactions and acknowledge that documents they sign electronically will bind them to the same extent as a paper signature. Customer represents and warrants to Company that only employees authorized to bind Customer legally shall electronically sign any document under this Agreement. Customer shall comply with any method of electronic communication/payment processing specified by Company, including electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases, electronic signature, and electronic communication systems, including, without limitation, the use of electronic data interchange ("EDI") portals. Notwithstanding the foregoing, e-mails, even those containing a signature block of one of Company's representatives, shall not constitute a signed writing.

33. COMPLIANCE WITH APPLICABLE LAWS.

a. General. Company and Customer will comply with all applicable federal, state and municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables, including but not limited to full compliance with any applicable provisions of The Health Insurance Portability and Accountability Act. Where the Customer is located outside the United States, or where the customer intends to ship the product outside the United States, the Customer shall be responsible for compliance with all U.S. export laws, and for filing all U.S. Electronic Export Information, as applicable.

b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and regulations in performing its duties under this Agreement; (ii) it does not and shall not engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment) to (a) any government official or employee of any government; (b) any official or employee of any department, agency, or instrumentality of a government; (c) any employee of any corporation or entity owned or controlled by a government; (d) any family member of such officials or employees; (e) any political party, party official, or political candidate; or (f) any other persons, owners, officers, directors, employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retaining business (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reduction of taxes or

to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the Company's Code of Conduct for Business Partners as set forth on the Allegion customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE.

c. The Customer shall indemnify and hold the Company harmless from any claim, demand, expense or cost arising from any breach of this Article.

d. The Customer shall permit the Company to conduct an audit or review of the Customer's financial books and records and business operations at such other times that the Company considers it necessary to confirm compliance with this provision. Such audit may be conducted by representatives of the Company or, at the Company's sole discretion, by a certified public accounting firm selected by the Company. The Customer shall cooperate with any inquiries from the Company's Ethics & Compliance Group.

e. A violation of this provision constitutes a material breach of this Agreement and the Company may terminate any purchase order or this Agreement immediately, with no opportunity to cure, in accordance with Section 27 of this Agreement.

f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible for obtaining or maintaining any permits for the performance of services or the verification or compliance with any code requirements relative to the performance of services, (ii) to the extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S. Government, Company's obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government in connection with such approval, and (iii) in the event the Deliverables are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and its suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers.

g. No Inducements. Each party represents to each other that neither it nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give or will give or offer to give, any sum of money or other material consideration to any person, directly or indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or other governmental permissions to enter into this Agreement or perform obligations hereunder.

h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as amended by Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR §§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and Executive Order 13496.

i. Ethical Business Conduct. Customer shall adopt and comply with Company's Business Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants to Company that: (a) it has the right, power, and authority to enter into this Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and to its respective Content and Marks for use within the scope of this Agreement, including the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws, rules, and regulations in effect that are applicable to its performance under this Agreement, including obtaining all such approvals and/or permits as may be required hereunder.

35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based on the representations contained herein for its own purposes and not for the benefit of any third party.

36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under this Agreement shall be in writing and delivered in person, or sent by receipted courier, express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is intended, at the addresses set forth in this Agreement. Either party may change its address for notice by giving written notice to the other party. Any notice or other communication shall be deemed given no later than the date actually received. Notice by courier, express mail, certified mail, or registered mail shall be deemed given on the date it is officially recorded as delivered and, in the absence of such record of delivery, it shall be rebuttably presumed to have been delivered on the third Business Day after it was deposited. Notices sent by e-mail require tangible confirmation of receipt from addressee.

37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent of Company. Company may assign its rights and delegate its duties under this Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the event of a spinoff, merger, business combination, consolidation or sale of all, or substantially all, of its assets or business that are related to this Agreement. The rights and duties in this Agreement shall bind and inure to the benefit of any such assignee.

38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in good faith to arrive at an alternative arrangement approximating the original business objective of the parties. The remaining terms and conditions of this Agreement will remain in effect.

39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by the other party of any provision of this Agreement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision of this Agreement constitute a waiver of any succeeding breach of the same or any other provision.

40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of the other party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder; (b) The rights and remedies herein reserved to Company are cumulative and additional to any other rights and remedies provided at law or equity; (c) The official text of this Agreement is in the English language. If this Agreement is translated into another language, the English text will govern any question with respect to interpretation;

(d) The headings in this Agreement are for convenience of reference only and do not affect the meaning of this Agreement in any manner.

DEFINITIONS.

Capitalized terms have the meanings set forth in this Section, or in the Section in which they first appear in this Agreement.

"Agreement" means these Allegion Terms and Conditions of Sale and Service, together with any applicable Country Supplement or Region Supplement provided by Company, and all of the documents referenced herein or therein.

"Affiliate" means any Person that directly or indirectly, through one or more intermediaries, controls, is controlled by, or is under common control with, the Company. The term "control" (including the terms "controlled by" and "under common control with") means the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of a Person, whether through the ownership of voting securities, by contract or otherwise.

"Business Day" means any day except Saturday, Sunday or any other day on which commercial banks located in the United States are authorized or required by Law to be closed for business. "Company" means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling products that are part of the Allegion product portfolio. Schlage Lock Company and/or its subsidiary or affiliates will be severally but not jointly liable under the Agreement.

"Company Marks" refers to the Marks of Company.

"Confidential Information" shall mean any and all information provided by either party to the other party pertaining to the disclosing party's business. Confidential Information shall include, but not be limited to, any bitting lists, formulae for products, manufacturing processes, production techniques, packaging processes, methods, research materials, ideas, marketing plans and related materials, quality standards, test results and data, apparatus, engineering drawings, contract documents, computer software, hardware, or firmware, business activities information such as financial information, reports, projections, books and records, customer and supplier information, and operations, customer and supplier lists and data, specifications, know how, and other Proprietary Information or Trade Secrets (as defined herein) that either party may furnish to the other party. Confidential Information shall not include information that: (a) is or becomes publicly known if such public knowledge or disclosure is not the result of any act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already known to the Receiving Party without utilizing the Confidential Information; (c) is information disclosed to the Receiving Party by a third party which is not to the Receiving Party's knowledge, after inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving Party without the use of Confidential Information. The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach. Confidential Information may be furnished in any tangible or intangible form including, but not limited to, writings, drawings, computer and other electronic media, logic diagrams, component specifications, graphs, prototypes, samples, or verbal communications and regardless of whether such information is marked or designated as "confidential." For the avoidance of doubt, all information, knowledge or data disclosed by Company to Customer, regardless of whether disclosed in written, tangible, oral, visual or other form, including, without limitation, sample products, equipment, software, or other objects or material, provided by Company to Customer, and all information, knowledge or data which was obtained by Customer from visits to Company's facilities, shall be considered "Confidential Information" under this Agreement. "Content" means all information (including without limitation any text, music, sound,

photographs, video, graphics, data or software), in any medium, on a particular Company Web page or Website or in Marketing Materials.

"Customer" means the purchaser of Deliverables from Company.

"Deliverables" means any good or service or both purchased by Customer from Company under these General Terms and Conditions of Sale and Service.

"End Users" means the purchaser that (a) has acquired a Deliverable from Customer for (i) its own and its Affiliate's/Affiliates' internal use and not for resale, remarketing or distribution or (ii) incorporation into its own products and (b) is an individual or entity, other than any federal,

state or local agency, office or division. "IP" means all intellectual property and industrial property rights comprising or relating to/ of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not Trademarks, registered by any authorized private registrar or Governmental Authority, web addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and design registrations, whether or not copyrightable, including copyrights and copyrightable works, software and firmware, application programming interfaces, architecture, files, records, schematics, data, data files, and databases and other specifications and documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights, interests and protections that are associated with, equivalent or similar to, or required for the exercise of, any of the foregoing, however arising, in each case whether registered or unregistered and including all registrations and applications for, and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world. "Marketing Materials" means all marketing brochures, buckslips, pamphlets, emails, text, call

scripts or other material, whether in printed format, audio or audiovisual format, or in any other format, that contain any (i) Content relating to the Company Deliverables or (ii) Company Marks. "Marks" means collectively the domain names, trademarks, trade names, service marks, trade dress, logos, and the like used or provided by either party for use in connection with this Agreement.

"Patents" means all patents (including all reissues, divisionals, provisionals, continuations and continuations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent applications, and other patent rights and any other Governmental Authority-issued indicia of invention ownership (including inventor's certificates, petty patents and patent utility models). "Person" means a person or entity.

"Price Books" mean Company's current Price Book in effect for the applicable Deliverable being purchased by Customer.

"Trade Secrets" means and includes business or technical information of either party, including processes, formulas, devices, techniques, compilations and other material that a party attempts to maintain in secret and that derive commercial value for such party from not being generally known to the public or readily ascertainable through independent development or reverse engineering.

DOOR CLOSER SPECIALISTS

Since its founding in 1926, LCN has specialized in solving door control problems through the use of high quality, innovative door control products. By adhering to high standards of performance, LCN has earned a leadership role within the industry and is committed to meeting door control challenges of the future. With representatives located throughout the world, LCN provides the products and services necessary to solve your door control problems.

The LCN formula for success

Materials

LCN is committed to providing the best door closers in the world. In addition to the mechanical advantages derived from proven designs, much of the durability of the closer and arm system is related to the materials used in their

Heat-Treated

LCN steel pinions have larger, stronger teeth and are double heat-treated for the greatest possible strength on the shaft. Heat-treating makes the pinion harder, better able to resist wear after years of service and results in less stress on the cylinder.

Extensive Abuse Test

Why do some hardware professionals claim that LCN stands for "Last Closer Needed?" LCN closers are put through grueling tests in which they exceed industry requirements.

Special Templates

When a standard door closer won't do the job, there is only one proven, reliable source for special solutions — LCN. With over 3,000 special templates on file, LCN can provide a door control solution for one-of-akind doors such as vault, balanced, over-sized and arch doors.

Forged Steel Arms

The closing power and control generated within LCN closers is transferred to the door through forged steel arms. Forged steel arms have greater strength, better appearance and less bulk.

Chrome Silicon

Many closer manufacturers use less expensive oil-tempered springs, but LCN engineers know that such a spring loses up to 20% of its power after a few thousand cycles.

Hydraulic Fluid

LCN uses a special formula hydraulic fluid with special lubrication properties to keep closer components working smoothly. This unique all-weather hydraulic fluid eliminates the need for seasonal adjustments.

Customer Service

At a time when machines are picking up more and more customer calls, real people are answering the phones at LCN. Every member of our customer service staff is trained and qualified to assist you with orders, closer selection and special applications.

United State Minimum Advertised Pricing Policy (MAP) for LCN

Allegion through its Schlage Lock Company, LLC entity ("Allegion") has determined that certain advertising practices undermine Allegion's trade reputation, brands, and premium image within the target consumer population and discourage Allegion's Resellers (as hereinafter defined) from investing in the Allegion product lines and providing the best possible service and support to consumers. Accordingly, to protect the integrity of the Allegion brands, Allegion has adopted this unilateral Minimum Advertised Price Policy ("MAP Policy"), which applies to all distributors, wholesalers, retailers, and other resellers who are recognized as Authorized Sellers, Authorized Resellers or Authorized Retailers by Allegion (collectively, "Resellers") of Allegion products in the United States of America.

The MAP Policy applies to all products listed on the Allegion MAP Schedule ("Covered Products"). Allegion is solely responsible for establishing the minimum advertised price ("MAP") for each Covered Product and will communicate the MAP for each Covered Product to all Resellers through the Allegion MAP Schedule.

Commercial Product MAP Schedule

· The MAP for the "covered products" for LCN® 4000 and 1460 series offered by Allegion for resale in the United States of America shall be 43% off the list price identified in the most current price book issued by Allegion USA for use in the United States of America.

Manufacturer Suggested Retail Price:

· MSRP will provide guidance to sellers to accurately position our product pricing in the market which represents our brand, quality, and value the products bring to our end customer.
· MSRP will be 23% off list price for LCN 4000's series door closers and LCN 1460's series door closers

PRICE LIST

CLOSER SERIES	STANDARD POWDER COAT FINISHES	PLATED FINISHES		S H W
SERIES NUMBER ARM TYPE	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	I E P I P G I H N T G	April 2020
1250 Series - Surface Mount
1250Rw/PA*	$215	N/A	N/A	8
1250 Rw/62A	230	N/A	N/A	7
1250 LONG	210	N/A	N/A	7
1250Hw/PA*	245	N/A	N/A	10
1250HLONG	250	N/A	N/A	10
1250EDA	265	N/A	N/A	8
1250HEDA (Handed)	300	N/A	N/A	8
1250 CUSH	300	N/A	N/A	9
1250HCUSH	360	N/A	N/A	9
1250SCUSH	360	N/A	N/A	9
1250SHCUSH	420	N/A	N/A	9	1250 Series

Add for; Slim Cover ( SLIM ) ( $15 ), TORX Fasteners ( TORX ) ( $15 ), Special Rust Inhibitor ( SRI ) ( $40 ) *Note - When BAA (Buy American Act) is required for 1250 Rw/PA and Hw/PA in AL or DKBRZ please designate BAA when ordering. Buy American Act (BAA) ($30) for 1250 Rw/PA and Hw/PA in AL or DKBRZ.

For parts & accessories, see page 50

1260 Series - Surface Mount
1261REG	$295	N/A	N/A	11
1261 Rw/PA	295	N/A	N/A	12
1261 Rw/62A	310	N/A	N/A	12
1261 LONG	290	N/A	N/A	11
1261 H	320	N/A	N/A	11
1261 Hw/PA	325	N/A	N/A	12
1261HLONG	330	N/A	N/A	11
1261EDA	345	N/A	N/A	13
1261EDA w/62G	355	N/A	N/A	13
1261HEDA (Handed)	380	N/A	N/A	13
1261 HEDA w/62G (Handed)	390	N/A	N/A	13
1261CUSH	380	N/A	N/A	12
1261HCUSH	440	N/A	N/A	12
1261 SHCUSH	500	N/A	N/A	12
1261SCUSH	440	N/A	N/A	12

Add for; Slim Cover ( SLIM ) ( $15 ), TORX Fasteners ( TORX ) ( $15 ), Special Rust Inhibitor ( SRI ) ( $40 ) For parts & accessories, see page 50.

121 - 180

232 mm =

PRICE LIST

CLOSER SERIES	STANDARD POWDER COAT FINISHES	PLATED FINISHES		S H W
SERIES NUMBER ARM TYPE	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	I E P I P G I H N T G	April 2020
1450 Series - Surface Mount
1450Rw/PA*	-	N/A	N/A	9
1450Rw/62A	300	N/A	N/A	9
1450LONG 1450Hw/PA*		N/A N/A	N/A N/A	δ 11
1450 HLONG		N/A N/A	N/A N/A	11
1450EDA		N/A	N/A	9
1450EDA w/62G		N/A	N/A	9
1450 HEDA	370	N/A	N/A	9	eh \|\|\|\| \| \|\|
1450CUSH	370	N/A	N/A	9	뭐 \|\|\| \|\|
1450 HCUSH	430	N/A	N/A	10
1450SCUSH	430	N/A	N/A	10	I \|\|\| I \|
1450SHCUSH	490	N/A	N/A	10	1/50 5- 1
Add for; Delay Action ( DEL ) ( $45 ) FTORX Fasteners ( TORX ) ( $15 ), Cus	Full Metal Cover ( MC ) ( Ş tom Powder Finish ( RA I	30 ), Full Pla L) ( $40 ),	stic Cover ( FC ) ( $1 Brite Metallic ( MT I	0), LPC) ($60),	1450 Series

*Note - When BAA (Buy American Act) is required for 1450 Rw/PA and Hw/PA in AL or DKBRZ please designate BAA when ordering. Buy American Act (BAA) ($30) for 1450 Rw/PA and Hw/PA in AL or DKBRZ.

For parts & accessories, see page 50.

Special Rust Inhibitor ( SRI ) ( $40 )

1450T Series - Surface Mount
1450TSTD	$360	NA	NA	12
1450TH	385	NA	NA	12
1450TBUMPER	365	NA	NA	12
1450TH BUMPER	395	NA	NA	12
Add for; Full Metal Cover Cover (MC	) ( $30 ), Full Plastic Cov	er ( FC ) ( $10 ), TO	ORX Fasteners (	TORX) ($15),
Special Rust Inhibitor (SRI) ($40),	Custom Powder Finish (	RAL) ($40), E	Brite Metallic (N	ITLPC) ($60)

Add for; Delay Action ( DEL ) ( $45 ), Designer Series Cover ( DS ) ( $30 ), Full Cover ( FC ) ( $10 ), TORX Fasteners ( TORX ) ( $15 ), Special Rust Inhibitor ( SRI ) ( $40 ), Custom Powder Finish ( RAL__ ) ( $40 ), Brite Metallic ( MTLPC ) ( $60 )

For parts & accessories, see page 51.

1460T Series - Surface Mount
1460T, 1461T	STD	$445	$735	$815	12
1460T, 1461T	H	470	760	840	12
1460T, 1461T	BUMPER	450	740	820	12
1460T, 1461T	H BUMPER	480	770	850	12
ALLE D. C. C. (DE) (ADD) F. U.C. (DE) (ADD) TODY F. L. (TODY) (ADD)

Add for; Designer Series Cover ( DS ) ($30), Full Cover ( FC ) ($10), TORX Fasteners ( TORX ) ($15), Special Rust Inhibitor ( SRI ) ($40), Custom Powder Finish ( RAL__ ) ($40), Brite Metallic ( MTLPC ) ($60) For parts & accessories, see page 51.

Indicates products that have EPD documentation available and meet LEED v4.

PRICE LIST

CLOSER SERIES		STANDARD POWDER COAT FINISHES	PLATED FINISHES		S H W
SERIES NUMBER	ARM TYPE	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	I E P I P G I H N T G	April 2020
2010 Series - Concealed (Requires Handing) 2011, 2013-2016 STD 2011, 2013-2016H 2011, 2013-2016BUMPER 2011, 2013-2016H BUMPER		$680 705 685 715	$1,190 1,215 1,195 1,225	$1,340 1,365 1,345 1,375	13 14 13 14	2010 Series

Brite Metallic ( MTLPC )* ( $60 ) For parts & accessories, see page 52.

2030 Series - Concealed (Requires Handing)


2031-2035 STD	$1,130	$1,640	$1,790	14
2031-2035H	1,155	1,665	1,815	14
2031-2035BUMPER	1,135	1,645	1,795	14
2031-2035H BUMPER	1,165	1,675	1,825	14

Add for; TORX Fasteners ( TORX ) ( $15 ), Special Rust Inhibitor ( SRI ) ( $40 ), Custom Powder Finish ( RAL___ ) ( $40 ),

Brite Metallic ( MTLPC )* ( $60 )

For parts & accessories, see page 52.

2210 Series - Concealed (Requires Handing)

2213-2215STD	$945	$1,455	$1,605	17
2213DPS-2215DPSSTD	1,055	1,565	1,715	17

Add for; Advanced Variable Backcheck ( AVB ) ( $25 ), Special Rust Inhibitor (N/A with DPS) ( SRI ) ( $40 ),

Custom Powder Finish ( RAL___ ) ( $40 ), Brite Metallic ( MTLPC ) ( $60 )

For parts & accessories, see page 52.

2030 Series

2310ME Series - Concealed (Requires Handing & Voltage) 2314ME ...............................................STD $1,265 $1,635 $1,725 17

Add for; Bypass Cylinder ( B80 ) or ( B140 ) ( $75 ), TORX Fasteners ( TORX ) ( $15 ), Custom Powder Finish ( RAL___ )* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

For parts & accessories, see page 52.

2610 Series - Concealed (Requires Handing)

2613-2614...........................................STD $2,285 $2,795 $2,945 22 2613DPS-2614DPS .................................STD 2,395 2,905 3,055 22

Add for; Custom Powder Finish ( RAL___ )* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

See pages 20-21 for control boxes and compressors. Also, see pages 26-43 for actuators, tubing, & accessories. For parts & accessories, see page 53.

PRICE LIST

CLOSER SERIES		STANDARD POWDER COAT FINISHES		PLATED FINISHES	S H W
SERIES NUMBER	ARM TYPE	ANCLR ANDKB	N/A	N/A	I E P I P G I H N T G	April 2020
2810 Series - Concealed (Requires Handing)

2811.......................................................STD/CP $4,850 ANCLR or ANDKB 78 2811...................................................... STD/OP 4,925 ANCLR or ANDKB 78

Header lengths available 33" to 48" on operators without POS or BKY (please specify).

Header lengths available 36" to 48" on operators with POS or BKY (please specify).

STD/CP arm has 2 ¾" spindle center, STD/OP arm has 3 ¾" spindle center. Add for; Double Door Header (49" to 98" – please specify) ( DD ) ( $250 ),

Positive Mechanical Stop (STD/CP arm only) ( POS ) ( $25 ), Breakaway Stop (STD/CP arm only) ( BKY ) ( $100 )

Manual Prep (requires DD header and STD/OP arm) (49" to 98" - please specify) ( MPDD ) ( $850 )

See pages 30-47 for actuators & accessories.

For parts & accessories, see page 53.

2810 Series

2850 Series - Concealed/Simultaneous Pair

2853.....................................................STD/CP $7,900 ANCLR or ANDKB 155 2853.................................................... STD/OP 8,050 ANCLR or ANDKB 155

Header lengths available 52" to 98" on operators without POS or BKY (please specify).

Header lengths available 70" to 98" on operators with POS or BKY (please specify).

STD/CP arm has 2 ¾" spindle center, STD/OP arm has 3 ¾" spindle center.

Add for; Positive Mechanical Stop (STD/CP arm only) ( POS ) ( $50 ), Breakaway Stop (STD/CP arm only) ( BKY ) ( $200 )

See pages 30-47 for actuators & accessories.

For parts & accessories, see page 53.

2850 Series

2860 Series - Concealed/Independent Pair

2863 ....................................................STD/CP $9,600 ANCLR or ANDKB 155 2863 ................................................... STD/OP 9,750 ANCLR or ANDKB 155

Header lengths available 65" to 98" on operators without POS or BKY (please specify).

Header lengths available 70" to 98" on operators with POS or BKY (please specify).

STD/CP arm has 2 ¾" spindle center, STD/OP arm has 3 ¾" spindle center.

Add for; Positive Mechanical Stop (STD/CP arm only) ( POS ) ( $50 ), Breakaway Stop (STD/CP arm only) ( BKY ) ( $200 )

See pages 30-47 for actuators & accessories.

For parts & accessories, see page 53.


CLOSER SERIES	STANDARD POWDER COAT FINISHES		PLATED FINISHES	S H W
SERIES NUMBER ARM TYPE	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	I E P I P G I H N T G	April 2020
3030 Series - Concealed (Requires Handing) 3031-3034REG 3031-3034H Add for; TORX Fasteners (TORX) ($15), Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) For parts & accessories, see page 54.	$470 470	$690 690	$720 720	6 6	3030 Series
3130 Series - Concealed (Requires Handing) 3131-3133STD 3131-3133H 3131-3133BUMPER 3131-3133H BUMPER Add for; TORX Fasteners (TORX) ($15), Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) For parts & accessories, see page 54.	$570 595 575 605	$790 815 795 825	$820 845 825 855	8 8 8 8	3130 Series
3130SE Series - Concealed (Requires Handing & Voltage) 3133SE-3134SE STD 3133SE-3134SELONG Add for; TORX Fasteners (TORX) ($15), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) For parts & accessories, see page 54.	$915 925	$1,135 1,145	$1,165 1,175	8 8	3130SE Series
4000T Series - Wall Pocket (SEM7800 Series Available Separately) 4003T-4004TSTD Add for; Metal Cover (MC) ($15), TORX Fasteners (TORX) ($15), Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) For parts & accessories, see page 54.	$565	$975	$1,055	15	4000T Series
4010 Series - Surface Mount (Requires Handing) 4011 or 4016REG 4011 or 4016H 4011 or 4016 FL Add for; Delay Action (DEL) ($45) (4011 only), Telephone Cylinder (TEL) ($45), Metal Cover (MC) ($15), TORX Fasteners (TORX) ($15), Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) Note - 4010 Series is available as 4011 (Adjustable 1-5) or 4016 (Size 6 Only - Not ADA Compliant). For parts & accessories, see page 54.	$495 550 645	$905 960 NA	$985 1,040 NA	11 12 15	4010 Series
4010T Series - Surface Mount (Requires Handing) 4011T, 4013T-4014TSTD 4011T, 4013T-4014TH 4011T, 4013T-4014TBUMPER	$565 590 570	$975 1000 980	$1,055 1080 1060	16 16 16	4010T Series

Price Book 8

Indicates products that have EPD documentation available and meet LEED v4.

Custom Powder Finish ( RAL ___)* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

4011T, 4013T-4014T..................H BUMPER 600 1010 1090 16 4011T, 4013T-4014T..................................DE 600 1010 1090 16 4011T, 4013T-4014T...........................DE HO 625 1035 1115 16 4011T, 4013T-4014T...............DE BUMPER 605 1015 1095 16 4011T, 4013T-4014T...........DE H BUMPER 635 1045 1125 16 Add for; Metal Cover ( MC ) ( $15 ), TORX Fasteners ( TORX ) ( $15 ), Special Rust Inhibitor ( SRI ) ( $40 ),

For parts & accessories, see page 55.

PRICE LIST

CLOSER SERIES	STANDARD POWDER COAT FINISHES	PLATED FINISHES
SERIES NUMBER ARM TYPE	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26	I E P I P G I H N T G	April 2020

4021 or 4026REG	$495	$905	$985	11
4021 or 4026LONG	500	910	990	11
4021 or 4026H	550	960	1,040	12
4021 or 4026 FL	645	NA	NA	12

Add for; Delay Action ( DEL ) ( $45 ) (4021 only) , Telephone Cylinder ( TEL ) ( $45 ), Metal Cover ( MC ) ( $15 ), TORX Fasteners ( TORX ) ( $15 ), Special Rust Inhibitor ( SRI ) ( $40 ), Custom Powder Finish ( RAL ___)* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

Note - 4020 Series is available as 4021 (Adjustable 1-5) or 4026 (Size 6 Only - Not ADA Compliant). For parts & accessories, see page 55.

4020T Series - Surface Mount (Requires Handing)


4021T, 4023T-4024TSTD	$565	$975	$1,055	15
4021T, 4023T-4024TH	590	1,000	1,080	16
4021T, 4023T-4024TBUMPER	570	980	1,060	15
4021T, 4023T-4024TH BUMPER	600	1,010	1,090	16

Add for; Metal Cover ( MC ) ( $15 ), TORX Fasteners ( TORX ) ( $15 ), Special Rust Inhibitor ( SRI ) ( $40 ), Custom Powder Finish ( RAL ___)* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

For parts & accessories, see page 55.


4031REG	$460	$855	$935	8
4031Rw/PA	460	855	935	9
4031Rw/62A	485	880	960	8
4031LD	435	830	910	8
4031LD/PA	450	845	925	8
4031 LD/62A	465	860	940	8
4031LONG	465	860	940	8
4031H	515	910	990	8
4031 Hw/PA	525	920	1000	9
4031HLONG	525	920	1000	8
4031EDA	500	895	975	9
4031HEDA (Handed)	540	935	1,015	9
4031CUSH	530	925	1,005	9
4031HCUSH	600	995	1,075	9
4031SCUSH	605	1000	1,080	9
4031 SHCUSH	655	1,050	1,130	9

Add for; Special Rust Inhibitor ( SRI ) ( $40 ), Custom Powder Finish ( RAL ___)* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

For parts & accessories, see page 56.

4030T Series - Surface Mount

4031TSTD	$530	$925	$1,005	9
4031T H	555	950	1030	9
Add for; Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60)

For parts & accessories, see page 56.

Indicates products that have EPD documentation available and meet LEED v4.

PRICE LIST

CLOSER SERIES	STANDARD POWDER COAT FINISHES	PLATED FINISHES		S H W
SERIES NUMBER ARM TYPE	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	I E P I P G I H N T G	April 2020
4040XP Series - Surface Mount
4040XPREG	$525	$935	$1,015	13
4040XPRw/PA	525	935	1,015	13
4040XPLONG	530	940	1,020	14
4040XP XLONG	565	975	1,055	14
4040XPRw/62A	550	960	1,040	12	4040XP Series
4040XPH	580	990	1,070	13
4040XP Hw/PA	590	1,000	1,080	12
4040XPHLONG	590	1,000	1,080	12
4040XPEDA	565	975	1,055	14
4040XPEDA w/62G	570	980	1,060	13
4040XPHEDA (Handed)	605	1015	1,095	14
4040XP HEDA w/62G (Handed)	615	1,025	1,105	13
4040XPCUSH	595	1,005	1,085	14
4040XPHCUSH	665	1,075	1,155	14
4040XPSCUSH	670	1,080	1,160	15
4040XP SHCUSH	720	1,130	1,210	15
Add for; Delay Action (DEL) ($45), Metal Cover (Handed) (MC) ($15),
TORX Fasteners (TORX) ($15), Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40),

Brite Metallic ( MTLPC )* ( $60 ) For parts & accessories, see page 56.


4040XPTSTD	$595	$1,005	$1,085	15
4040XPTH	620	1030	1110	16
4040XPTBUMPER	600	1,010	1090	15
4040XPTH BUMPER	630	1040	1120	16
4040XPT DE (Handed)	645	1055	1,135	16
4040XPT DE H (Handed)	670	1,080	1,160	16
4040XPTDE BUMPER (Handed)	650	1060	1,140	16
4040XPTDE H BUMPER (Handed)	680	1090	1,170	16

Add for; Metal Cover (Handed) ( MC ) ( $15 ), TORX Fasteners ( TORX ) ( $15 ), Special Rust Inhibitor ( SRI ) ( $40 ),

Custom Powder Finish ( RAL___ )* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

For parts & accessories, see page 57.

4040SE Series - Surface Mount (Requires Voltage)
4040SESTD	$925	$1,335	$1,415	12
4040SELONG	925	1,335	1,415	12
4040SE DE (Handed)	975	1,385	1,465	12

Add for; Metal Cover (Handed) ( MC ) ( $15 ), TORX Fasteners ( TORX ) ( $15 ), Custom Powder Finish ( RAL ___)* ( $40 ),

Brite Metallic ( MTLPC )* ( $60 )

For parts & accessories, see page 57.

4040SEH Series - Surface Mount Arm & Track Only (Requires Voltage) (Closer Available Separately) 4040SEH ............4040SEH-3038 w/Arm $585 $805 $835 8

Add for; TORX Fasteners ( TORX ) ( $15 )

Note - Includes 4040SEH Track & 4040SEH Arm Only.

For parts & accessories, see page 57.

Indicates products that have EPD documentation available and meet LEED v4.

PRICE LIST

CLOSER SERIES		STANDARD POWDER COAT FINISHES		PLATED FINISHES	S H W
SERIES NUMBER	ARM TYPE	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	I E P I P G I H N T G	April 2020
4050A Series - Surface Mount
4050ARw/PA		$445	N/A	N/A	13
4050A LONG		450	N/A	N/A	14
4050ARw/62A 4050AHw/PA		470	N/A	N/A	13
4050AHLONG		510	N/A N/A	N/A N/A	12 12
4050AEDA		510 485	N/A	N/A	14
4050A EDA w/62G		490	N/A	N/A	13
4050AHEDA (handed)		525	N/A	N/A	14
4050AHEDA w/62G (handed)		535	N/A	N/A	13
4050A CUSH		515	N/A	N/A	14
4050AHCUSH		585	N/A	N/A	14
4050ASCUSH		590	N/A	N/A	15
4050A SHCUSH		640	N/A	N/A	15	4050 Series
Add for; Delay Action (DEL) ($45), Metal Cover (MC) ($15),

		TORX Fasteners (TORX) ($15), Custom Powder Finish (RAL) ($40), Brite Metallic (MTLPC) ($60),
Special Rust Inhibitor (SRI) ($40). For parts & accessories, see page 57.


4050AT Series - Surface Mount
4050AT STD		515	N/A	N/A	15
4050ATH		540	N/A	N/A	16
4050ATBUMPER		520	N/A	N/A	15
4050ATH BUMPER		550	N/A	N/A	16
4050ATDE (Handed)		550	N/A	N/A	16
4050AT DE H (Handed)		575	N/A	N/A	16
4050ATDE BUMPER (Handed)		555	N/A	N/A	16	4050AT Series
4050ATDE H BUMPER (Handed)		585	N/A	N/A	16
		Add for; Metal Cover (MC) ($15), TORX Fasteners (TORX) ($15), Special Rust Inhibitor (SRI) ($40),
		Custom Powder Finish (RAL) ($40), Brite Metallic (MTLPC) ($60).
For parts & accessories, see page 58.

4110 Series - Surface Mount (Requires Handing)
4111 or 4116EDA		$510	$920	$1,000	13
4111 or 4116EDA w/62G		515	925	1,005	13
4111 or 4116HEDA		550	960	1,040	13
4111 or 4116HEDA w/62G		560	970	1,050	13
4111 or 4116 FL		620	NA	NA	15
4111 or 4116CUSH		540	950	1,030	13	4110 Series

4111HCUSH		610	1,020	1,100	14
4111 or 4116SCUSH		615	1,025	1,105	15
4111 SHCUSH		665	1,075	1,155	15
		Add for; Delay Action (DEL) ($45) (4111 only), Advanced Variable Backcheck (AVB) ($25),
		Telephone Cylinder (TEL) ($45), Metal Cover (MC) ($15), TORX Fasteners (TORX) ($15),
		Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60)
		Note - 4110 Series is available as 4111 (Adjustable 1-5) or 4116 (Size 6 Only - Not ADA Compliant).
For parts & accessories, see page 58.

4110T Series - Surface Mount (Requires Handing)
4111T, 4113T-4114TSTD		$540	$950	$1,030	15
4111T, 4113T-4114TH		565	975	1,055	16
4111T, 4113T-4114TBUMPER		545	955	1,035	15

For parts & accessories, see page 58.

4110T Series

4111T, 4113T-4114T......................H BUMPER 575 985 1,065 16 Add for; Metal Cover ( MC ) ( $15 ), TORX Fasteners ( TORX ) ( $15 ), Special Rust Inhibitor ( SRI ) ( $40 ),

Custom Powder Finish ( RAL ___)* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

PRICE LIST


CLOSER SERIES	STANDARD POWDER COAT FINISHES		PLATED FINISHES	S H W
SERIES NUMBER ARM TYPE	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	I E P I P G I H N T G	April 2020
4210 Series - Surface Mount (Requires Handing) 4211 or 4216EDA 4211 or 4216CUSH 4211HCUSH Add for; Delay Action (DEL) ($45) (4211 only), Advanced Variable Backcheck (AVB) ($25), Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) Note - 4210 Series is available as 4211 (Adjustable 1-5) or 4216 (Size 6 Only - Not ADA Compliant). For parts & accessories, see page 59.	$570 600 670	$965 995 1,065	$1,045 1,075 1,145	14 14 15	4210 Series
4210T Series - Surface Mount (Requires Handing) 4211T, 4213T-4214TSTD Add for; Advanced Variable Backcheck (AVB) ($25), Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) For parts & accessories, see page 59.	$680	$1,075	$1,155	15	4210T Series
4310HSA Series - Surface Mount (Requires Handing & Voltage) 4311HSASTD 4311HSADE Add for; Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) For parts & accessories, see page 59.	$1,380 1,430	$1,775 1,825	$2,030 2,080	22 22	4310HSA Series
4310ME Series - Surface Mount (Requires Handing & Voltage) 4314MESF 4314MEDE	$1,295 1,345	$1,690 1,740	$1,945 1,995	17 17

Add for; Bypass Cylinder ( B80 ) or ( B140 ) ( $85 ), TORX Fasteners ( TORX ) ( $15 ), Custom Powder Finish ( RAL___ )* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

For parts & accessories, see page 59.

PRICE LIST

CLOSER SERIES		STANDARD POWDER COAT FINISHES	PLATED FINISHES
SERIES NUMBER	ARM TYPE	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26	I E P I P G I H N T G	April 2020

4410HSA Series - Surface Mount (Requires Handing & Voltage) 4412HSA....................................................REG $1,310 $1,705 $1,960 22 4412HSA.................................................LONG 1,315 1,710 1,965 22

Add for; Custom Powder Finish ( RAL___ )* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

Closer price includes 4410HSA-18 for regular mount or 4410HSA-18G (please specify) plate for flush mount application.) For parts & accessories, see page 60.

4410ME Series - Surface Mount (Requires Handing & Voltage)

4414ME .....................................................REG $1,225 $1,620 1875 17 4414ME ..................................................LONG 1230 1,625 1,880 17

Add for; Bypass Cylinder ( B80 ) or ( B140 ) ( $85 ), TORX Fasteners ( TORX ) ( $15 ),

Custom Powder Finish ( RAL ___)* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

Closer price includes 4410ME-18 for regular mount or 4410ME-18G (please specify) plate for flush mount application. For parts & accessories, see page 60.

4510 Series - Surface Mount (Requires Handing)

4511 or 4516 ..............................................EDA $570 $965 $1,045 14

Add for; Delay Action ( $45 ) (4511 only) , Advanced Variable Backcheck ( AVB ) ( $25 ),

Special Rust Inhibitor ( SRI ) ( $40 ), Custom Powder Finish ( RAL ___) ( $40 ), Brite Metallic ( MTLPC ) *( $60 ) Note - 4510 Series is available as 4511 (Adjustable 1-5) or 4516 (Size 6 Only - Not ADA Compliant)

4510T Series - Surface Mount (Requires Handing)

4511T, 4513T-4514T ................................STD $680 $1,075 $1,155 15

Add for; Advanced Variable Backcheck ( AVB ) ( $25 ), Special Rust Inhibitor ( SRI ) ( $40 ), Custom Powder Finish ( RAL ___)* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

For parts & accessories, see page 60.

4630 Series - Surface Mount

4631 ............................................................STD $5,830 $6,225 $6,480 40

Add for; TORX Fasteners ( TORX ) ( $15 ), Custom Powder Finish ( RAL ___)* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

Note - Optional Concealed On/Off Switch ( CS ) Available ( $0 ) - Please Specify.

See pages 30-47 for actuators & accessories.

For parts & accessories, see page 60.

4640 Series - Surface Mount

4642 ...........................................................REG $5,755 $6,150 $6,405 40 4642 ........................................................LONG 5,760 $6,155 $6,410 40

Add for; TORX Fasteners ( TORX ) ( $15 ), Custom Powder Finish ( RAL ___)* ( $40 ), Brite Metallic ( MTLPC )* ( $60 )

Note - Optional Concealed On/Off Switch ( CS ) Available ( $0 ) - Please Specify.

See pages 30-47 for actuators & accessories.

For parts & accessories, see page 61.

Indicates products that have EPD documentation available and meet LEED v4.

STANDARD CLOSER SERIES POWDER COAT FINISHES			PLATED FINISHES	S H W
SERIES NUMBER ARM TYPE	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	I E P I P G I H N T G	April 2020
4810 Series - Surface Mount 4811STD Add for; Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) For parts & accessories, see page 61.	$2,245	$2,640	$2,895	19	4810 Series
4820 Series - Surface Mount 4822REG 4822 LONG Add for; Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) Closer price includes 4820-18 plate for regular mount or 4820-18G (please specify) plate for flush mount application. For parts & accessories, see page 61.	$2,170 2,175	$2,565 2,570	$2,820 2,825	19 19	4820 Series
4840 Series - Surface Mount 4841EDA 4841CUSH 4841SCUSH Add for; Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) See pages 24-25 for control boxes and compressors. Also, see pages 30-47 for actuators, tubing, & accessories. For parts & accessories, see page 61.	$2,210 2,240 2,315	$2,605 2,635 2,710	$2,860 2,890 2,965	20 20 20	4840 Series Shown w/4840-459 Door Loop (LCN)
5010 Series - Concealed (Requires Handing) 5011-5016REG 5011-5016H Add for; Delay Action (DEL) ($45), TORX Fasteners (TORX) ($15), Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) For parts & accessories, see page 61.	$630 630	$1,140 1,140	$1,290 1,290	12 13	4840 (PUSH SIDE MOUNTED AUTO-EQUALIZER WITH 4040 EDA ARM) 5010 Series
5030 Series - Concealed (Requires Handing) 5031, 5033-5036REG 5031, 5033-5036H Add for; TORX Fasteners (TORX) ($15), Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) For parts & accessories, see page 62.	$1,055 1,055	$1,565 1,565	$1,715 1,715	14 14	5030 Series
6030 Series - Concealed/Double Acting 6031-6035BUMPER 6031-6035H BUMPER Add for; TORX Fasteners (TORX) ($15), Special Rust Inhibitor (SRI) ($40), Custom Powder Finish (RAL)* ($40), Brite Metallic (MTLPC)* ($60) For parts & accessories, see page 62.	$1,360 1,390	$1,870 1,900	$2,020 2,050	17 17	6030 Series Shown w/ 7253 Pivot (Ives)

STANDARD CLOSER SERIES POWDER COAT FINISHES			PLATED FINISHES	S H W
SERIES NUMBER ARM TYPE	ANCLR ANDKB	N/A	N/A	I E P I P G I H N T G	April 2020
9130 Series - Surface Mount 9131STD (Pull) 27" cover (MC) is standard - Optional 'Full Cover' (FC) (36") available (please specify) Add for Full Cover (FC) ($100) See pages 30-47 for actuators & accessories. For parts & accessories, see page 62.	$3,905		Plated finish not available ANCLR or ANDKB	38	9130 Series
9140 Series - Surface Mount 9142REG (Push) 9142LONG (Push) 27" cover (MC) is standard - Optional 'Full Cover' (FC) (36") available (please specify) Add for Full Cover (FC) ($100) See pages 30-47 for actuators & accessories. For parts & accessories, see page 62.	$3,830 3,835		Plated finish not available ANCLR or ANDKB ANCLR or ANDKB	38 38	9140 Series
9150 Series - Surface Mount 9153 REG2 (Push) 9153 LONG2 (Push) 72" cover (MC) is standard. Additional lengths are not available. See pages 30-47 for actuators & accessories. For parts & accessories, see page 62.	$7,775 7,785		Plated finish not available ANCLR or ANDKB ANCLR or ANDKB	85 85	9150 Series

PRICE LIST

CLOSER SERIES	STANDARD POWDER COAT FINISHES		PLATED FINISHES	S H W
SERIES NUMBER ARM TYPE	ANCLR ANDKB	N/A	N/A	I E P I P G I H N T G	April 2020

9530 Series - Surface Mount (Requires Handing) Plated finish not available 9531.................................................STD (Pull) $4,925 ANCLR or ANDKB 78 Header lengths available 33" to 48" (please specify).

9530 Series

STD arm has 2 ¾" spindle center. Add for; Double Door Header (49" to 98" – please specify) ( DD ) ( $250 )

See pages 30-47 for actuators & accessories.

For parts & accessories, see page 62.

9540 Series - Surface Mount (Requires Handing)	Plated finish not available
9542REG (Push) $4,840	ANCLR or ANDKB	78
9542LONG (Long Push) 4,840	ANCLR or ANDKB	78

Header lengths available 33" to 48" (please specify).

Angle Brackets ( HL/B ) are standard, End Dress Plates ( HL/D ) are optional (please specify).

REG or LONG arm has 2 ¾" spindle center.

Optional 12 ¼" spindle available (requires minimum 43" header).

Add for; Double Door Header (49" to 98" – please specify) ( DD ) ( $250 )

See pages 30-47 for actuators & accessories.

For parts & accessories, see page 63.

9550 Series - Surface Mount (DE Requires Handing) Plated finish not available

9553REG2 (Push Pair)	$8,100	ANCLR or ANDKB	155
9553LONG2 (Long Push Pair)	8,100	ANCLR or ANDKB	155
9553STD2 (Pull Pair)	8,250	ANCLR or ANDKB	155
9553REG/STD (Double Egress)	8,175	ANCLR or ANDKB	155

Header lengths available 52" to 98" (please specify) on operators with REG or LONG (push) arms. Header lengths available 60" to 98" (please specify) on operators with STD (pull) arms.

Header lengths available 60" to 98" (please specify) on operators with REG/STD (double egress) arms.

Angle Brackets ( HL/B ) are standard, End Dress Plates ( HL/D ) are optional (please specify). REG, LONG, STD or REG/STD has 2 ¾" spindle center.

Optional 12 ¼" spindle available (requires minimum 71" header).

See pages 30-47 for actuators & accessories.

For parts & accessories, see page 63.

9560 Series - Surface Mount (DE Requires Handing)Plated finish not available

9563REG2 (Push Pair)	$9,800	ANCLR or ANDKB	155
9563LONG2 (Long Push Pair)	9,800	ANCLR or ANDKB	155
9563STD2 (Pull Pair)	9,950	ANCLR or ANDKB	155
9563REG/STD (Double Egress)	9,875	ANCLR or ANDKB	155

Header lengths available 65" to 98" (please specify) on operators with REG or LONG (push) arms. Header lengths available 65" to 98" (please specify) on operators with STD (pull) arms.

Header lengths available 65" to 98" (please specify) on operators with REG/STD (double egress) arms. Angle Brackets ( HL/B ) are standard, End Dress Plates ( HL/D ) are optional (please specify).

REG, LONG, STD or REG/STD has 2 ¾" spindle center.

Optional 12 ¼" spindle available (requires minimum 84" header).

See pages 30-47 for actuators & accessories.

For parts & accessories, see page 63.

9550 Series

9560 Series

SEM SERIES MAGNETS

PRICE LIST

SPECIALTY PRODUCTS	STANDARD POWDER COAT FINISHES	S H W
PRODUCT NUMBER	DESCRIPTION	AL (689) DKBRZ (695)	I E P I P G I H N T G	April 2020

SEM7800 Series Magnet Extension Kits

SEM7810-517....................................................................SEM Extension Kit (55 pcs) $1,020 8

Note - Extension Kit includes 1/2" extensions (10), 3/4" extensions (10), 1" extensions (10), 2" extensions (5) & ball pivot/connector links (20 ea). Individual extensions & ball pivot/connector links are available, please see page 50 in this price book for part number and list price.

SEM7800 Series Magnets
SEM7820 Floor Mount Magnet (Single Side)	$715	5
Low Profile Armature, Metal Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.			SEM7820
SEM7830 Wall Mount Magnet Low Profile Armature, Metal Housing,	405	4
Tri Voltage (12v/24v/120v) w/ 35lbs. holding force. SEM7840 Recessed Wall Mount Magnet Low Profile Armature, Metal Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.	405	4	SEM7840
SEM7850 Recessed Wall Mount Magnet Standard Profile Armature, Metal Housing,	405	4

Price Book 8

Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.

For parts & accessories, see page 50.

PAH60, PAINT AND FASTENERS

PRICE LIST

	POWDER COAT FINISHES		PLATED FINISHES		S H W
PRODUCT NUMBER DESCRIPTION	AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26	I E P I P G I H N T G	April 2020
Parallel Arm Holder
PAH60 (Handed) Door Holder	$140	$365		$435	3
Force Gauge						PAH60
ADA/FG Force Gauge	$60				1/2
LCN Spray Paint - Available in single cans or cases of 6 (same color) cans						ADA/FG
Can Spray Paint	$30	Per can			1
Case Spray Paint	130			Per case (6 cans, same color)	4

Fasteners - Individual & Sets SRT (1 ea.) SRT Screw (1 ea.)	$1					Self reaming & tapping screw.
						Size required. 1 ea.
SRT (Set of 4 ea.) SRT Screw (4 ea.)	3					Self reaming & tapping screw. Size required. 4 ea.
MS (1 ea.) Machine Screw (1 ea.)	1	3		5		Machine screw. Size required. 1 ea.
MS (Set of 4 ea.) Machine Screw (4 ea.)	3	10		15		Machine screw. Size required. 4 ea.
WS (1 ea.) Wood Screw (1 ea.)	1	3		5		Wood screw. Size required. 1 ea.
WS (Set of 4 ea.) Wood Screw (4 ea.)	3	10		13		Wood screw. Size required. 4 ea.
TORX (1 ea.) TORX Screw (1 ea.)	3	10		13		TORX machine screw. Size required. 1 ea.
TORX (Set of 4 ea.) TORX Screw (4 ea.)	5	15		20		TORX machine screw. Size required. 4 ea.
TB 1 3/4" (1 ea.) Thru Bolt, Female	2	7		10		Through bolt. 1 3/4" length.
TB 1 3/8" (1 ea.) Thru Bolt, Female	2	7		10		Through bolt. 1 3/8" length
TB 1 5/8" (1 ea.) Thru Bolt, Female	2	7		10		Through bolt. 1 5/8" length
TB 1 3/4" (Set of 4 ea.) Thru Bolt, Female (4 ea.)	5	20		25		Through bolt. Set of 4 ea. Size required
TB 1 3/8" (Set of 4 ea.) Thru Bolt, Female (4 ea.)	5	20		25		Through bolt. Set of 4 ea. Size required.
TB 1 5/8" (Set of 4 ea.) Thru Bolt, Female (4 ea.) TB/MS (1 ea.) TB(1) & MS(1)	5 3	20 7		25 10		Through bolt. Set of 4 ea. Size required. TB & MS. Set of 1 ea.
						Size and Series required.
TB/MS (Set of 4 ea.) TB(4) & MS(4)	6	24		30		TB & MS. Set of 4 ea.
Torx (Security) Driver Bits
T-10 TORX Bit Torx Bit, T-10	$14					TORX driver bit, size T-10.
T-15 TORX Bit Torx Bit, T-15	14					TORX driver bit, size T-15.
T-20 TORX Bit Torx Bit, T-20	14					TORX driver bit, size T-20.
T-25 TORX Bit Torx Bit, T-25	14					TORX driver bit, size T-25.
T-27 TORX Bit Torx Bit, T-27	14					TORX driver bit, size T-27.
Adjustment Wrenches
T1157 Hold Open Wrench	$5					Hold Open Adjustment Wrench

Green Hex Wrenches - NOW AVAILABLE!

One end has 3/32" hex for regulation valve adjustment and cover attachment. The other end has 5/32" hex for spring power adjustment. Great for training seminars.

GHW1 Green Hex Wrench	$9 Each	Green Hex Wrench. 1 Each.
GHW12 Green Hex Wrench	$80 / Pack of 12	Green Hex Wrench. Pack of 12
GHW100 Green Hex Wrench	$600 / Pack of 100	Green Hex Wrench. Pack of 100


CONTROL BOXES & COMPRESSORS PRODUCT NUMBER	PRODUCT DESCRIPTION	LIST PRICE	S H W I E P I P G I H N T G	April 2020
7980 Series Control Boxes
	7981 Control Box, Pnuematic, Internal Compressor. Self-contained control box/compressor combination for single door application. Includes -3960 Compressor Assembly.	$3,250	27
	7981ES Control Box, Pnuematic, Electric Strike (ES) Relay, Internal Compressor. Self-contained control box/compressor combination for single door application. Includes -3960 Compressor Assembly, -3390A Relay.	3,775	27
	7982 Control Box, Pnuematic, Internal Compressor Self-contained control box/compressor combination for either independent or simultaneous operation of two (2) door leaves. Includes -3960 Compressor Assembly.	4,600	34	7980 Series Control Box
	7982S Control Box, Pnuematic, Sequential (S) Feature, Internal Compressor. Self-contained control box/compressor combination for independent, simultaneous or sequential operation of two (2) door leaves. Includes -3960 Compressor Assembly, -3426 Sequencer Card.	5,000	34	(15˝ x 15˝ x 6˝)
	7982ES Control Box, Pnuematic, Electric Strike (ES) Relays, Internal Compressor. Self-contained control box/compressor combination for independent or simultaneous operation of two (2) door leaves. Includes -3960 Compressor Assembly, -3390A & -3390B Relays.	5,525	34
	7982SES Control Box, Pnuematic, Sequential (S) Feature, Electric Strike (ES) Relays, Internal Compressor. Self-contained control box/compressor combination for independent, simultaneous or sequential operation of two (2) door leaves. Includes -3960 Compressor Assembly, -3390A & -3390B Relays, -3426 Sequencer Card.	5,875	34
7900 Series Control Boxes
	7901 Control Box, Pnuematic Single door application or independent control of single door in multiple door systems. Two door leaves can be operated, if activated simultaneously. Requires a separate 900 Series compressor.	$2,225	14
	7901ES Control Box, Pnuematic Electric Strike (ES) Relay. Single door application or independent control of single door in multiple door systems. Two door leaves can be operated, if activated simultaneously. Includes -3390A Relay. Requires a separate 900 Series compressor.	2,750	14
	7902 Control Box, Pnuematic Independent operation of two (2) door leaves or simultaneous and/or sequential operation of four (4) door leaves. Requires a separate 900 Series compressor.	3,050	15	7900 Series Control Box (15˝ x 15˝ x 6˝)
	7902S Control Box, Pnuematic, Sequential (S) Feature Independent operation of two (2) door leaves or simultaneous operation and/or sequential operation of four (4) door leaves. Includes -3426 Sequencer Card. Requires a separate 900 Series compressor.	3,450	15
	7902ES Control Box, Pnuematic, Electric Strike (ES) Relays Independent operation of two (2) door leaves or simultaneous of four (4) door leaves. Includes -3390A & -3390B Relays. Requires a separate 900 Series compressor.	4,000	15
	7902SES Control Box, Pnuematic, Sequential (S), Electric Strike (ES) Relays Independent operation of two (2) door leaves or simultaneous and/or sequential operation of four (4) door leaves. Includes -3390A & -3390B Relays, -3426 Sequencer Card. Requires a separate 900 Series compressor.	4,350	15

Note - Locate a 7980 Series Control Box within 50 linear tubing feet of the door. Locate a 7900 Series Control Box within 100 linear tubing feet of the door. Use -925 Pnuematic Tubing to connect operator and control box. 7900 Series Control Boxes require a separate air source, LCN 900 Series Compressors are recommended. For parts & accessories, see pages 28-29.

CONTROL BOXES AND COMPRESSORS

PRICE LIST

CONTROL BOXES & COMPRESSORS PRODUCT NUMBER	PRODUCT DESCRIPTION	LIST PRICE	S H W I E P I P G I H N T G	April 2020
	7940 Series Control Boxes - (Requires LCN 900 series compressor) 7949 Control Box, Pneumatic, Auxiliary 'Blow-Open' Control box works with or without 7901/7902 Series Control Box and one or two pnuematic Auto Equalizers. Controlled by the smoke evacuation system, the 7949 Series Control Box will open the door(s) to allow fresh air into building.	$1,850	14
	7949ES Control Box, Pneumatic, Auxiliary 'Blow-Open', Electric Strike (ES) Relay. Auxiliary 'blow-open' control box works with or without 7901ES/7902ES Series Control Box and one or two pnuematic Auto Equalizers. Controlled by the smoke evacuation system, the 7949 Series Control Box will unlock and open the door(s) to allow fresh air into building.	2,300	14	7940 Series Control Box (15˝ x 15˝ x 6˝)

Note - A 'blow-open' system requires a separate air source. A 'blow-open' system that includes an automatic or power operator function also requires a separate air source and is limited to the operation of two (2) door leaves. In both cases, the LCN 900 Series Compressors are recommended. 7940 Series Control Boxes should be installed within 100 linear tubing feet of the automatic operator(s). For parts & accessories, see pages 28-29.

	CONTROL BOXES & COMPRESSORS
PRODUCT NUMBER	DESCRIPTION	LIST PRICE	PRODUCT DESCRIPTION	April 2020
293G 319 320 329 329G	Control Box Components Muffler Fitting, "T" Fitting, "Inline" Air Filter Assembly Air Filter Assembly	$30 3 3 70 230	Exhaust muffler for 7901, 7902, 7981, or 7982 Series Control Boxes. "T" fitting to connect 925 pneumatic tubing. "Inline" fitting to connect 925 pneumatic tubing. Replacement inlet air filter for the 7981 or 7982 Series Control Boxes. Replacement inlet air filter for the 7901 or 7902 Series Control Boxes. Includes -929 Air Filter Assembly.
900	Power Supply, 10T	530	Main power supply/input board for the 7901, 7902, 7981, & 7982 Series Control Boxes. Ten (10) terminals.	900
903	Timer Module	235	0-30 second timer module for 7901, 7902, 7981, & 7982 Series Control Box. Plugs into the -900 Power Supply Board.
925	Pneumatic Tubing	2.00/ft	Flexible pneumatic tubing with an 1/8" inner diameter & 1/4" outer diameter. Specify number of linear feet required when ordering.
929 941 941C 942 962	Filter & Seal Valve Assembly Valve Assembly Valve Assembly Isolator	30 800 800 1,550 25	Internal filter & seal component to the 329G Air Filter Assembly. Regulator valve assembly for the 7901 series control box. Regulator valve assembly for the 7949 series control box. Regulator valve assembly for the 7902 series control box. Rubber isolator for 7981 or 7982 compressor (-3960) assembly.	903
3299A	Control Box Components Solenoid Assembly Valve 'A'	450	Air valve assembly for the 7981 Series Control Box or the 'A' circuit valve assembly in the 7982 Series Control Box.
3299B	Solenoid Assembly Valve 'B'	490	Air valve assembly for the 'B' circuit in the 7982 Series Control Box.
3328 3390A	Copper Coupler 'A' Relay Package	25 525	Converts pnuematic tubing connection to copper. Electric strike (ES) relay for 7901 and 7982 Series Control Boxes or the 'A' circuit ES relay assembly used in the 7902 and 7982. Series Control Boxes. Can be added to a standard control box to convert to ES operation. Includes -390 Relay, relay base and wire harness. The 3390A is included when either a 7901ES, 7902ES,	3299A
3390B	'B' Relay Package	525	7981ES or 7982ES is ordered. Electric strike (ES) relay for 'B' circuit in either the 7902 or 7982 Series Control Boxes. Can be added to a standard control box to convert to ES operation. Includes -390 Relay, relay base and wire harness. The 3390B is included when either a 7902ES or 7982ES is ordered.
3390C	'C' Relay Package	525	Electric strike (ES) relay assembly for the 7949 series 'blow-open' control box. Includes -390C Relay, relay base and wire harness. The 3390C is included when a 7949ES is ordered.
3426	Sequencer Card	350	Dual, 0-30 second timer module for 7902 or 7982 Series Control Box. Can be added to a standard 7902 or 7982 Series Control Box to convert box to sequential operation3426 Sequencer card is included when either a 7902S or 7982S Series Control Box is ordered.	3426
3592	Compressor Service Kit	75	Service kit for air pressure adjustment in the either the 7981 or 7982 Series Control Box.
3960	Compressor Assembly	2,000	Internal air pump assembly for the 7981 or 7982 Series Control Box3960 Compressor Assembly includes starter

3960

capacitor, -962 Isolators and -329 Air Filter Assembly.

CONTROL BOX COMPONENTS

Control Box Components

941 941C 942


	ACTUATOR/SENSOR QUICK FIND GUIDE
PRODUCT NUMBER	ITEM PAGE(S)	LIST PRICE	April PRODUCT DESCRIPTION 2020

8310-800	40	$25	Ring, Weather, 4½" Round
8310-801	40	25	Ring, Weather, 4½" x 4½"
8310-802	40	25	Ring, Weather, 6" Round
8310-804-1	42	1,300	Sensor, Door Mount, Safety
8310-804-2	42	1,775	Sensor, Door Mount, Safety
8310-805	44	60	Switch, Door Position
8310-805C	44	60	Switch, Door Position
8310-806K	48	220	Switch, Key
8310-806R	48	220	Switch, Rocker
8310-807	48	220	Filter, Line
8310-813	34	950	Actuator, Wall Mount, 4¾" x 4¾"
8310-818	32	185	Actuator, Jamb Mount, Logo, 1½" x 4¾"
8310-818T	32	185	Actuator, Jamb Mount, Logo, Text, 1½" x 4¾"
8310-819F	40	40	Box Only, Jamb Mount, Flush Mount, 1½" x 4¾"
8310-819S	40	40	Box Only, Jamb Mount, Surface Mount, 1½" x 4¾"
8310-824	44	85	Transformer
8310-824P	44	85	Transformer
8310-836T	36	1,015	Actuator, Full Length, Logo, Text, 36" x 6"

8310-836TW	36	1,175	Actuator, Full Length, Logo, Text, Wireless, 36" x 6"
8310-844	46	210	Transmitter Kit, Wall Mount, 9v
8310-844J	46	210	Transmitter Kit, Jamb Mount, 3v
8310-845	48	340	Relay and Door Sequencer
8310-846	44	30	Harness, Header Mount
8310-847	44	120	Harness, Door Mount
8310-852	36	280	Actuator, Wall Mount, Logo, 6" Round
8310-852T	36	280	Actuator, Wall Mount, Logo, Text, 6" Round
8310-852TA	36	280	Actuator, Wall Mount, Active Logo, Text, 6" Round
8310-852TWP	36	725	Actuator, Wall Mount, Logo, Text, Wireless, Package, 6" Round
8310-852WP	36	725	Actuator, Wall Mount, Logo, Wireless, Package, 6" Round
8310-853	34	270	Actuator, Wall Mount, Logo, 4¾" x 4¾"
8310-853T	34	270	Actuator, Wall Mount, Logo, Text, 4¾" x 4¾"
8310-853TA	34	270	Actuator, Wall Mount, Active Logo, Text, 4¾" x 4¾"
8310-853TWP	34	725	Actuator, Wall Mount, Logo, Text, Wireless, Package, 4¾" x 4¾"
8310-853WP	34	725	Actuator, Wall Mount, Logo, Wireless, Package, 4¾" x 4¾"
8310-854	42	825	Sensor, Header Mount, Activation
8310-854ECA	44	215	Bracket, Drop Ceiling
8310-854ERA	44	145	Cover, Protective
8310-855	34	425	Actuator, Wall Mount, Logo, Dual Vestibule
8310-856	32	215	Actuator, Wall Mount, Logo
8310-856P	32	215	Actuator, Wall Mount, Logo
8310-856T	32	215	Actuator, Wall Mount, Logo, Text
8310-859	44	185	Remote, Handheld
8310-861	46	210	Transmitter, Handheld, 1 Channel
8310-862	46	210	Transmitter, Handheld, 2 Channel
8310-863	46	210	Transmitter, Handheld, 3 Channel
8310-864	46	210	Transmitter, Handheld, 4 Channel
8310-865	32, 34, 36, 46	220	Receiver
8310-866	46	950	Post, Bollard, Accommodates Bollard Actuator, 42" x 4" x 6"
8310-866FLA	46	950	Post, Bollard, Accommodates Full Length Actuator, 42" x 4" x 6"
8310-866CAP	46		Cap
		155

Price Book 8

ACTUATOR/SENSOR QUICK FIND GUIDE
PRODUCT NUMBER	ITEM PAGE(S)	LIST PRICE	April PRODUCT DESCRIPTION 2020
8310-867F	40	$175	Box, Flush Mount, 4¾" x 4¾"
8310-867S	40	175	Box, Surface Mount, 4¾" x 4¾"
8310-868F	40	155	Box, Flush Mount, 4½" Round
8310-868S	40	155	Box, Surface Mount, 4½" Round
8310-869F	40	170	Box, Flush Mount, 6" Round
8310-869S	40	170	Box, Surface Mount, 6" Round
8310-874	40	385	Escutcheon, 4½" Round
8310-876	40	385	Escutcheon, 6" Round
8310-877S	44	170	Spacer, Header Mount
8310-3803	44	605	Conversion Kit, Wireless, Jamb Mount
8310-3809	44	605	Conversion Kit, Wireless, Wall Mount
8310-3818TWF	32	410	Actuator, Jamb Mount, Logo, Text, Wireless, Flush, 1½" x 4¾"
8310-3818TWS	32	410	Actuator, Jamb Mount, Logo, Text, Wireless, Surface, 1½" x 4¾"
8310-3818WF	32	410	Actuator, Jamb Mount, Logo, Wireless, Flush, 1½" x 4¾"
8310-3818WS	32	410	Actuator, Jamb Mount, Logo, Wireless, Surface, 1½" x 4¾"
8310-3822T	38	425	Actuator Package, Logo, Text, 1½" x 4¾"
8310-3822TW	38	825	Actuator Package, Logo, Text, Wireless, 1½" x 4¾"
8310-3836T	46	1,900	Full Length Actuator / Bollard Package
8310-3836TW	46	2,075	Full Length Actuator / Bollard Package, Wireless
8310-3852TWF	36	650	Actuator, Wall Mount, Logo, Text, Wireless, Flush, 6" Round
8310-3852TWS	36	650	Actuator, Wall Mount, Logo, Text, Wireless, Surface, 6" Round
8310-3852WF	36	650	Actuator, Wall Mount, Logo, Wireless, Flush, 6" Round
8310-3852WS	36	650	Actuator, Wall Mount, Logo, Wireless, Surface, 6" Round
8310-3853TWB	46	450	Actuator, Bollard, Logo, Text, Wireless, 4¾" x 4¾"
8310-3853TWF	34	650	Actuator, Wall Mount, Logo, Text, Flush, 4¾" x 4¾"
8310-3853TWS	34	650	Actuator, Wall Mount, Logo, Text, Surface, 4¾" x 4¾"
8310-3853WB 8310-3853WF	46 34	450 650	Actuator, Bollard, Logo, Wireless, 4¾" x 4¾" Actuator, Wall Mount, Logo, Wireless, Flush, 4¾" x 4¾"
8310-3853WS	34	650	Actuator, Wall Mount, Logo, Wireless, Surface, 4¾" x 4¾"
8310-3855WF	34	995	Actuator, Wall Mount, Logo, Wireless, Flush, Dual Vestibule, 4¾" x 4¾"
8310-3855WS	34	995	Actuator, Wall Mount, Logo, Wireless, Surface, Dual Vestibule, 4¾" x 4¾"
8310-3856TWF	32	570	Actuator, Wall Mount, Logo, Text, Wireless, Flush, 4½" Round
8310-3856TWS	32	570	Actuator, Wall Mount, Logo, Text, Wireless, Surface, 4½" Round
8310-3856WF	32	570	Actuator, Wall Mount, Logo, Wireless, Flush, 4½" Round
8310-3856WS	32	570	Actuator, Wall Mount, Logo, Wireless, Surface, 4½" Round
8310-3857T	38	845	Actuator Package, Logo, Text, 4¾" x 4¾"
8310-3857TW	38	1,495	Actuator Package, Logo, Text, Wireless, 4¾" x 4¾"
8310-3860T	38	700	Actuator Package, Logo, Text, 4½" Round
8310-878	42	4,500	Sensor Package
8310-879	42	8,500	Sensor Package
8310-3860TW	38	1,350	Actuator Package, Logo, Text, Wireless, 4½" Round
8310-3881	42	6,150	Sensor Package
8310-3882	42	9,999	Sensor Package
8310-3883	42	1,775	Sensor Package
8310-3888	44	40	Harness, Safety Module
8310-3889	44	540	Safety Module Kit
8310-3891	42	8,750	Sensor Package
8310-3892	42	9,999	Sensor Package

ACTUATORS & ACCESSORIES

PRICE LIST

ACTUATORS & ACCESSORIES
PRODUCT DESCRIPTION NUMBER	LIST PRICE	PRODUCT DESCRIPTION	April 2020

8310 Series Actuators - Jamb Mount - 1-1/2" x 4-3/4" Rectangle - Interior Installation Only


8310-818	Actuator, Jamb Mount	$185	Actuator, 1-1/2" x 4-3/4" Rectangle, Logo
8310-818T	Actuator, Jamb Mount	185	Actuator, 1-1/2" x 4-3/4" Rectangle, Logo, Text
8310-3818WF	Actuator, Jamb Mount	410	Actuator, 1-1/2" x 4-3/4" Rectangle, Logo, Wireless, Flush Mount Includes 8310-818 Actuator, 8310-844J Transmitter Kit, 8310-819F Flush Box. Requires 8310-865 Receiver.
8310-3818WS	Actuator, Jamb Mount	410	Actuator, 1-1/2" x 4-3/4" Rectangle, Logo, Wireless, Surface Mount Includes 8310-818 Actuator, 8310-844J Transmitter Kit, 8310-819S Surface Box. Requires 8310-865 Receiver.
8310-3818TWF	Actuator, Jamb Mount	410	Actuator, 1-1/2" x 4-3/4" Rectangle, Logo, Text, Wireless, Flush Mount Includes 8310-818T Actuator, 8310-844J Transmitter Kit, 8310-819F Flush Box. Requires 8310-865 Receiver.
8310-3818TWS	Actuator, Jamb Mount	410	Actuator, 1-1/2" x 4-3/4" Rectangle, Logo, Text, Wireless, Surface Mount Includes 8310-818T Actuator, 8310-844J Transmitter Kit, 8310-819S Surface Box. Requires 8310-865 Receiver.
8310-865	Receiver	220	Receiver, Wireless, 1 Channel, Sequencing Feature Used in conjunction w/ Wireless Actuators & Transmitters

8310-818

8310-818T

8310 Series Actuators - Wall Mount - 4-1/2" Round


8310-856	Actuator, Wall Mount	$215	Actuator, 4-1/2" Round, Logo
8310-856T	Actuator, Wall Mount	215	Actuator, 4-1/2" Round, Logo, Text
8310-3856WF	Actuator, Wall Mount	570	Actuator, 4-1/2" Round, Logo, Wireless, Flush Mount. Includes 8310-856 Actuator, 8310-844 Transmitter Kit, 8310-868F Flush Box, 8310-800 Weather Ring. Requires 8310-865 Receiver.
8310-3856WS	Actuator, Wall Mount	570	Actuator, 4-1/2" Round, Logo, Wireless, Surface Mount Includes 8310-856 Actuator, 8310-844 Transmitter Kit, 8310-868S Surface Box, 8310-800 Weather Ring. Requires 8310-865 Receiver.
8310-3856TWF	Actuator, Wall Mount	570	Actuator, 4-1/2" Round, Logo, Text, Wireless, Flush Mount Includes 8310-856T Actuator, 8310-844 Transmitter Kit, 8310-868F Flush Box, 8310-800 Weather Ring. Requires 8310-865 Receiver.
8310-3856TWS	Actuator, Wall Mount	570	Actuator, 4-1/2" Round, Logo, Text, Wireless, Surface Mount Includes 8310-856T Actuator, 8310-844 Transmitter Kit, 8310-868S Surface Box, 8310-800 Weather Ring. Requires 8310-865 Receiver.
8310-865	Receiver	220	Receiver, Wireless, 1 Channel, Sequencing Feature Used in conjunction w/ Wireless Actuators & Transmitters

8310-856

8310-856T

8310 Series Actuators

ACTUATORS & ACCESSORIES
PRODUCT DESCRIPTION NUMBER	LIST PRICE	PRODUCT DESCRIPTION	April 2020

8310 Series Actuators - Wall Mount - 4-3/4" Square


8310-853	Actuator, Wall Mount	$270	Actuator, 4-3/4" Square, Logo
8310-853T	Actuator, Wall Mount	270	Actuator, 4-3/4" Square, Logo, Text
8310-853TA	Actuator, Wall Mount	270	Actuator, 4-3/4" Square, Active Logo, Text
8310-853WP	Actuator, Wall Mount	725	Actuator, 4-3/4" Square, Logo, Wireless, Surface Mount Easy mount, 'all in one', low profile, surface mount, wireless actuator. Requires 8310-865 Receiver
8310-853TWP	Actuator, Wall Mount	725	Actuator, 4-3/4" Square, Logo, Text, Wireless, Surface Mount Easy mount, 'all in one', low profile, surface mount, wireless actuator. Requires 8310-865 Receiver
8310-3853WF	Actuator, Wall Mount	650	Actuator, 4-3/4" Square, Logo, Wireless, Flush Mount Includes 8310-853, 8310-844 Transmitter Kit, 8310-867F Flush Box, 8310-801 Weather Ring. Requires 8310-865 Receiver
8310-3853WS	Actuator, Wall Mount	650	Actuator, 4-3/4" Square, Logo, Wireless, Surface Mount Includes 8310-853, 8310-844 Transmitter Kit, 8310-867S Surface Box, 8310-801 Weather Ring. Requires 8310-865 Receiver
8310-3853TWF	Actuator, Wall Mount	650	Actuator, 4-3/4" Square, Logo, Text, Wireless, Flush Mount Includes 8310-853T, 8310-844 Transmitter Kit, 8310-867F Flush Box, 8310-801 Weather Ring. Requires 8310-865 Receiver
8310-3853TWS	Actuator, Wall Mount	650	Actuator, 4-3/4" Square, Logo, Text, Wireless, Surface Mount Includes 8310-853T, 8310-844 Transmitter Kit, 8310-867S Surface Box, 8310-801 Weather Ring. Requires 8310-865 Receiver
8310-865	Receiver	220	Receiver, Wireless, 1 Channel, Sequencing Feature

8310-853

8310-853T

8310-855

8310 Series Actuators - Wall Mount - 4-3/4" Square

8310-813	Actuator, Wall Mount	$950	Actuator, 4-3/4" Square, Touchless, Wall Mount 'K' Band Technology 'Hands Free' operation, system is activated by movement near actuator face. Mounts in 4" x 4" electrical box - Includes black plexiglass cover
8310-855	Actuator, Wall Mount	425	Actuator, 4-3/4" Square, Logo, Dual Vestibule
8310-3855WF	Actuator, Wall Mount	995	Actuator, 4-3/4" Square, Logo, Dual Vestibule, Wireless, Flush Mount Includes 8310-855 Actuator, 8310-844 Transmitter (2), 8310-867F Flush Box, 8310-801 Weather Ring. Requires 8310-865 Receiver (2)
8310-3855WS	Actuator, Wall Mount	995	Actuator, 4-3/4" Square, Logo, Dual Vestibule, Wireless, Surface Mount Includes 8310-855 Actuator, 8310-844 Transmitter (2), 8310-867S Surface Box, 8310-801 Weather Ring. Requires 8310-865 Receiver (2)
8310-865	Receiver	220	Receiver, Wireless, 1 Channel, Sequencing Feature Used in conjunction w/ Wireless Actuators & Transmitters

Used in conjunction w/ Wireless Actuators & Transmitters

8310 Series Actuators

ACTUATORS & ACCESSORIES

PRICE LIST

ACTUATORS & ACCESSORIES
PRODUCT NUMBER	DESCRIPTION	LIST PRICE	PRODUCT DESCRIPTION	April 2020
8310 Series Actuators - Wall Mount - 6" Round
8310-852	Actuator, Wall Mount	$280	Actuator, 6" Round, Logo
8310-852T	Actuator, Wall Mount	280	Actuator, 6" Round, Logo, Text
8310-852TA	Actuator, Wall Mount	280	Actuator, 6" Round, Active Logo, Text
8310-852WP	Actuator, Wall Mount	725	Actuator, 6" Round, Logo, Wireless, Surface Mount Easy mount, 'all in one', low profile, surface mount, wireless actuator. Requires 8310-865 Receiver.	8310-852
8310-852TWP	Actuator, Wall Mount	725	Actuator, 6" Round, Logo, Text, Wireless, Surface Mount Easy mount, 'all in one', low profile, surface mount, wireless actuator. Requires 8310-865 Receiver.
8310-3852WF	Actuator, Wall Mount	650	Actuator, 6" Round, Logo, Wireless, Flush Mount Includes 8310-852 Actuator, 8310-844 Transmitter Kit, 8310-869F Flush Box, 8310-802 Weather Ring. Requires 8310-865 Receiver.	8310-852T
8310-3852WS	Actuator, Wall Mount	650	Actuator, 6" Round, Logo, Wireless, Surface Mount Includes 8310-852 Actuator, 8310-844 Transmitter Kit, 8310-869S Surface Box, 8310-802 Weather Ring. Requires 8310-865 Receiver.
	8310-3852TWF Actuator, Wall Mount	650	Actuator, 6" Round, Logo, Text, Wireless, Flush Mount Includes 8310-852T Actuator, 8310-844 Transmitter Kit, 8310-869F Flush Box, 8310-802 Weather Ring. Requires 8310-865 Receiver.	8310-852WP
	8310-3852TWS Actuator, Wall Mount	650	Actuator, 6" Round, Logo, Text, Wireless, Surface Mount Includes 8310-852T Actuator, 8310-844 Transmitter Kit, 8310-869S Surface Box, 8310-802 Weather Ring. Requires 8310-865 Receiver.
				8310-852TWP

Used in conjunction w/ Wireless Actuators & Transmitters

8310 Series Actuators - Specialty

8310-836T	Actuator, Full Length	1,015	Actuator, 36" x 6" Full Length, Logo, Text
8310-836TW	Actuator, Full Length	1,175	Actuator, 36" x 6" Full Length, Logo, Text, Wireless Requires 8310-865. Easy Mount, All-In-One, Low Profile Surface Mount, Wireless Actuator.

8310-865 Receiver 220 Receiver, Wireless, 1 Channel, Sequencing Feature

836T

8310 Series Actuators

	ACTUATORS & ACCESSORIES
PRODUCT NUMBER	DESCRIPTION	LIST PRICE	PRODUCT DESCRIPTION	April 2020

8310 Series Actuators - Wall Mount - 4-3/4" Square


8310-3822T	Actuator Package	$425	Actuator Package, 1-1/2" x 4-3/4", Jamb Mount Includes 8310-818T (2) Jamb Mount Actuator, (2) 8310-819S Surface Mount Box. Recommended for interior use only.
8310-3822TW	Actuator Package	825	Actuator Package, 1-1/2" x 4-3/4", Wireless, Jamb Mount Includes 8310-818T (2) Jamb Mount Actuator, 8310-819S (2) Surface Mount Box, 8310-844J (2) Jamb Mount Transmitter, 8310-865 Receiver. Recommended for interior use only.
8310-3860T	Actuator Package	700	Actuator Package, 4-1/2" Round, Wall Mount. Includes 8310-856T (2) Wall Mount Actuator, 8310-868S (2) Surface Mount Box
8310-3860TW	Actuator Package	1,350	Actuator Package, 4-1/2" Round, Wireless, Wall Mount Includes 8310-856T (2) Wall Mount Actuator, 8310-868S (2) Surface Mount Box, 8310-800 (2) Weather Ring, 8310-844 (2) Transmitter, 8310-865 Receiver
8310-3857T	Actuator Package	845	Actuator Package, 4-3/4" Square, Wall Mount. Includes 8310-853T (2) Wall Mount Actuator, 8310-867S (2) Surface Mount Box
8310-3857TW	Actuator Package	1,495	Actuator Package, 4-3/4" Square, Wall Mount. Includes 8310-853T (2) Wall Mount Actuator, 8310-867S (2) Surface Mount Box, 8310-801 (2) Weather Ring, 8310-844 (2) Transmitter, 8310-865 Receiver

8310 Series Actuator Packages

853T (2)

ACTUATORS & ACCESSORIES

PRICE LIST

8310-869S


PRODUCT NUMBER	DESCRIPTION	LIST PRICE	PRODUCT DESCRIPTION	April 2020
	8310 Series Actuator Accessories
8310-800	Ring, Weather	$24	Weather Ring, 4-1/2" Round Optional accessory. Can be used w/ any 4-1/2" round actuator
8310-801	Ring, Weather	24	Weather Ring, 4-1/2" Square Optional accessory. Can be used w/ any 4-1/2" square actuator
8310-802	Ring, Weather	24	Weather Ring, 6" Round Optional accessory. Can be used w/ any 6" round actuator	8310-800
8310-819F	Box Only, Jamb Mount	39	Jamb Box Only, 1-1/2" x 4-3/4" Rectangle, Flush Mount Optional accessory. Should be used on an interior installation Can be used w/ any 1-1/2" x 4-3/4" jamb mount actuator
8310-819S	Box Only, Jamb Mount	39	Jamb Box Only, 1-1/2" x 4-3/4", Rectangle, Surface Mount Optional accessory. Should be used on an interior installation only. Can be used w/ any 1-1/2" x 4-3/4" jamb mount actuator	8310-819S
8310-867F	Box, Flush Mount	170	Box Only, 4-3/4" Square, Flush Mount Optional accessory. Can be used w/ any 4-3/4" square actuator
8310-867S	Box, Surface Mount	170	Box Only, 4-3/4" Square, Surface Mount Optional accessory. Can be used w/ any 4-3/4" square actuator
8310-868F	Box, Flush Mount	153	Box Only, 4-1/2" Round, Flush Mount Optional accessory. Can be used w/ any 4-1/2" round actuator	8310-867S
8310-868S	Box, Surface Mount	153	Box Only, 4-1/2" Round, Surface Mount Optional accessory. Can be used w/ any 4-1/2" round actuator
8310-869F	Box, Flush Mount	165	Box Only, 6" Round, Flush Mount Optional accessory. Can be used w/ any 6" round actuator	8310-868S
8310-869S	Box, Surface Mount	165	Box Only, 6" Round, Surface Mount Optional accessory. Can be used w/ any 6" round actuator
8310-874	Escutcheon	379	Escutcheon, 4-1/2" Round, Decorative, Protective Optional accessory. Can be used w/ any 4-1/2" round actuator

8310-876 Escutcheon 379 Escutcheon, 6" Round, Decorative, Protective

Optional accessory. Can be used w/ any 6" round actuator

8310 Series Actuator Accessories

8310-819F 8310-819S 8310-867F 8310-867S

8310-868F 8310-868S

8310-869F 8310-869S

8310-874 8310-876

ACTUATORS & ACCESSORIES

PRICE LIST

ACTUATORS & ACCESSORIES
PRODUCT DESCRIPTION NUMBER	LIST PRICE	PRODUCT DESCRIPTION	804-1 April 2020

8310 Series Activation/Safety Sensors

8310-804-1	Sensor, Door Mount, Safety	$1,300	Door Mount Safety Sensor, Sensor with one element Used to sense obstruction(s) on leading edge of
8310-804-2	Sensor, Door Mount, Safety	1,775	Door Mount Safety Sensor, Sensor with two elements Used to sense obstruction(s) on full face of door
8310-854	Sensor, Header Mount, Activation	825	Header Mount Activation Sensor, 'K' Band Technology
8310-877	Sensor, Header Mount, Safety	1,575	Header Mount Safety Sensor, 'Diffused Infrared' Technology Provides 'safety function' during door open & door closed position. Nine selectable/programmable patterns. Optional 8310-859

Handheld Remote Control can be used to program 8310-877 Sensor from a distance. Includes 8310-846 Harness.

8310-854

8310-804-1

8310-804-2

8310 Series Activation/Safety Sensor Packages

8310-878	Sensor Package	$4,500	Monitored Safety Sensor Kit for single door applications. Contains two (2) door-mounted sensors and a control hub that perform the swing door safety functions and provides the sensor monitoring required by A156.10. All wire harnesses and mounting hardware included. 8310-877
8310-879	Sensor Package	8,500	Monitored Safety Sensor Kit for all double door applications. Contains four (4) door-mounted sensors and a control hub that perform the swing door safety functions and provides the sensor monitoring required by A156.10. All wire harnesses and mounting hardware included.
8310-3881	Sensor Package	6,150	Safety Sensor Package. Includes 8310-854 (2) Header Mount Activation Sensor & 8310-878 Monitored Safety Sensor Kit (Used with Senior Swing Only)
8310-3882	Sensor Package	9,999	Safety Sensor Package. Includes 8310-854 (2) Header Mount Activation Sensor & 8310-879 Monitored Safety Sensor Kit (Used with Senior Swing Only)
8310-3883	Sensor Package	1,775	Activation/Safety Sensor Package, Low Energy Convenience, Single Door. Includes 8310-804-1 Door Mount Safety Sensor, 8310-805C Door Position Switch (Concealed), 8310-845 Programmable Relay Module
8310-3891	Sensor Package	8,750	Activation/Safety Sensor Package, Health Care I, Simultaneous Pair Includes 8310-877 Header Mount Sensor, 8310-877S Header Mount Spacer, 8310-804-2 (4) Door Mount Sensor, 8310-847 (2) Harness.
8310-3892	Sensor Package	9,999	Activation/Safety Sensor Package, Health Care II, Independent Pair Includes 8310-877 (2) Header Mount Sensor, 8310-877S (2) Header Mount Spacer, 8310-804-2 (4) Door Mount Sensor, 8310-847 (2) Harness

8310 Series Activation/Safety Sensor Packages

854 (2)

877S

847

ACTUATORS & ACCESSORIES
PRODUCT DESCRIPTION NUMBER	LIST PRICE	PRODUCT DESCRIPTION	April 2020

	8310 Series Activation/Safety Sensor Accessories
8310-805	Switch, Door Position	$60	Switch, Door Position, Surface Mount. Used when 8310-804-1 Surface Mount or 8310-804-2 Door Mounted Safety Sensor is installed in conjunction w/ either a 4630 or 4640 Series Automatic Operator. Disables approach side sensor when door is closed 8310-824
8310-805C	Switch, Door Position	60	Switch, Door Position, Concealed. Used when 8310-804-1 Concealed or 8310-804-2 Door Mounted Safety Sensor is installed in conjunction w/ either a 4630 or 4640 Series Automatic Operator. 854ECA Disables approach side sensor when door is closed
8310-824	Transformer	85	Transformer, 24v, Hardwired. Optional accessory - Used to remotely power any 24v 8310-859 sensor/receiver
8310-824P	Transformer	85	854ERA Transformer, 24v, Plug In. Optional accessory - Used to remotely power any 24v sensor/receiver
8310-846	Harness, Header Mount	30	Harness, Header Mount. Used w/ 8310-877 Header Mount Safety Sensor
8310-847	Harness, Door Mount	130	Harness, Door Mount. 8310-854ECA Used w/ 8310-804-1 or 8310-804-2 Door Mount Safety Sensor
8310-854ECA	Bracket, Drop Ceiling	215	Bracket, Drop Ceiling. Optional bracket used w/ 8310-854 Header Mount Activation Sensor
8310-854ERA	Cover, Protective	145	Cover, Protective Optional cover used w/ 8310-854 Header Mount Activation Sensor
8310-859	Remote, Handheld	185	Remote Control, Handheld. 8310-854ERA Optional handheld remote that can be used to program 8310-877 Header Mount Safety Sensor or 8310-854 Header Mount Motion Sensor
8310-877S	Spacer, Header Mount	170	Header Mount Safety Sensor Spacer. Required when 8310-804-1 or 8310-804-2 Door Mount Safety Sensors
8310-3803	Conversion Kit, Wireless, Jamb Mount	605	Wireless Conversion Kit, Jamb Mount, 3v Converts standard jamb actuator to wireless version Requires 8310-819 Jamb Box - Includes 8310-865 Receiver, 8310-844J (2) Jamb Mounted Transmitter Kit
8310-3809	Conversion Kit, Wireless, Wall Mount	605	Wireless Conversion Kit, Wall Mount, 9v Converts standard wall mount actuator to wireless version. Requires Surface Box & Weather Ring - Includes 8310-865 Receiver, 8310-844 (2) Wall Mount Transmitter Kit
8310-3888	Harness, Safety Module	40	Harness, Safety Module, Service Part. Safety Module Harness included in 8310-3889 Safety Module & Kit
8310-3889	Safety Module Kit	540	Safety Module & Kit Used w/ 7901, 7902, 7981, 7982 Control Boxes. Includes 8310-3888 Safety Module Harness, 8310-845 Time Delay Relay. Required when 8310-877 Header Mount Safety Sensor is used w/ Pneumatic

Automatic Operators (2610, 4810, 4820 or 4840 Series)

8310 Series Activation/Safety Sensor Packages

ACTUATORS & ACCESSORIES

PRICE LIST


PRODUCT NUMBER	ACTUATORS & ACCESSORIES DESCRIPTION	LIST PRICE	PRODUCT DESCRIPTION 2020	April
	8310 Series Actuators, Sensors & Accessories
8310-844	Transmitter Kit, Wall Mount	$210	Transmitter, Wireless, 1 Channel, Wall Mount, 9v Used to convert standard wall mount actuator to wireless. Requires 8310-865 Receiver
8310-844J	Transmitter Kit, Jamb Mount	210	Transmitter, Wireless, 1 Channel, Jamb Mount, 3v Used to convert standard jamb mount actuator to wireless. Requires 8310-865 Receiver	8310-844
8310-861	Transmitter, Handheld	210	Transmitter, Wireless, 1 Channel, Handheld, 9v Requires 8310-865 Receiver
8310-862	Transmitter, Handheld	210	Transmitter, Wireless, 2 Channel, Handheld, 9v Requires at least one 8310-865 Receiver
8310-863	Transmitter, Handheld	210	Transmitter, Wireless, 3 Channel, Handheld, 9v Requires at least one 8310-865 Receiver	8310-861
8310-864	Transmitter, Handheld	210	Transmitter, Wireless, 4 Channel, Handheld, 9v Requires at least one 8310-865 Receiver
8310-865	Receiver	220	Receiver, Wireless, 1 Channel, Sequencing Feature Used in conjunction w/ Wireless Actuators & Transmitters
	8310 Series Actuators, Sensors & Accessories
8310-866	Post, Bollard	$950	42" x 4" x 6" Bollard Post, Mounting Base, Actuator Cut-Out Requires 8310-3853WB Bollard Actuator or 8310-3853TWB Bollard Actuator. Can be used w/ 8310-853 Wall Mount Actuator, 8310-853T Wall Mount Actuator or 8310-855 Wall Includes 8310-866CAP. Available in AL or DKBRZ (please specify).
8310-866FLA	Post, Bollard	950	42" x 4" x 6" Bollard Post, Mounting Base, Full Length Actuator Only Requires 8310-836T Full Length Actuator or 8310-836TW Full Length Actuator. Includes 8310-866CAP. Available in AL or DKBRZ (please specify).
8310-866CAP	Cap	155	Plastic Cap, Protective Cover, Service Part. Formed plastic cap for 8310-866 Bollard Post
8310-3853WB	Actuator, Bollard	450	4-3/4" Square w/ Logo, Wireless. For use w/ 8310 866 Bollard Post. Includes 8310-853 Actuator, 8310-844 Transmitter Kit. Requires 8310-865 Receiver.	8310-866
	8310-3853TWB Actuator, Bollard	450	4-3/4" Square w/ Logo, Text, Wireless. For use w/ 8310-866 Bollard Post. Includes 8310-853T Actuator, 8310-844 Transmitter Kit. Requires 8310-865 Receiver.
8310-3836T	Actuator, Full Length	1,900	Actuator, 36" x 6" Full Length, Logo, Text Bollard Post Available In AL or DKBRZ (Please Specify).Includes 8310-866FLA Bollard Post and 8310-836T Full Length Actuator.
8310-3836TW	Actuator, Full Length	2,075	Actuator, 36" x 6" Full Length, Logo, Text, Wireless Includes 8310-844J. Requires 8310-865 Bollard Post Available In AL or DKBRZ (Please Specify). Includes 8310-866FLA Bollard Post, 8310-836T Full Length Actuator and 8310-844 Wireless Transmitter Kit.	8310-865

Used in conjunction w/ Wireless Actuators & Transmitters

8310-865 Receiver 220 Receiver, Wireless, 1 Channel, Sequencing Feature

8310 Series Actuators, Sensors & Accessories

ACTUATORS & ACCESSORIES

PRICE LIST

ACTUATORS & ACCESSORIES
PRODUCT DESCRIPTION NUMBER	LIST PRICE	PRODUCT DESCRIPTION	April 2020

8310 Series Accessories

8310-806K	Switch, Key	$220	Switch, Key Type, 3 Position (On/Off/Hold-Open) Optional switch used w/ Senior Swing, Benchmark, or 4630/4640 Operators with (CS) option
8310-806R	Switch, Rocker	220	Switch, Rocker Type, 3 Position (On/Off/Hold-Open) Optional switch w/ Senior Swing or Benchmark Operators.
8310-807	Filter, Line	220	Line Filter, AC, 120v. Optional filter used w/ Senior Operators to reduce 'line noise'.
8310-845	Relay and Door Sequencer	340	Programmable Relay and Door Sequencer Used to coordinate electric locking Programable device release for Senior Swing, also functions as door sequencer. Operator manufactured prior to 9/06. Also, is a component to the 8310-8337 Low Energy Convenience Package

8310-806K 8310-806R 8310-807

8310-845

US26D US 3 FINISHES FINISHES US 4 AL (689) AL (689) US 10 DKBRZ (695) DKBRZ (695) PARTS & ACCESSORIES BRASS (696) PARTS & ACCESSORIES BRASS (696) LTBRZ (691) LTBRZ (691) STAT (690) STAT (690) BLACK (693) BLACK (693) SEM7800 Series 1260-3049/PAHold Open Arm w/62PA 120.00 1260-3049LHold Open Long Arm 125.00 SEM7810-E050 Extension 1/2" 25.00 1260-3077EDA EDA Arm 140.00 SEM7810-E075Extension 3/4" 30.00 1260-3077EDA/GEDA Arm w/62G 150.00 SEM7810-E100Extension 1" 30.00 1260-3049EDAHEDA Arm 175.00 SEM7810-E200Extension 2" 40.00 1260-3049EDA/GHEDA Arm w/62G 185.00 SEM7810-E400Extension 4" 40.00 1260-3077CUSH CUSH Arm 175.00 SEM7810-514Ball Pivot/Connection Link 30.00 1260-3049CUSH HCUSH Arm 235.00 SEM7820-515 Fastener Kit 65.00 1260-72 Slim Cover 15.00 SEM7820-72Standard Cover & Base 500.00 1260-SRTScrew Pack 25.00 SEM7820-825Door Armature 130.00 1260-TBSRTScrew Pack 25.00 SEM7820-516 Magnet Core Assembly 170.00 1260-WMSScrew Pack 25.00 SEM7830-515 Fastener Kit 25.00 1260-TBWMSScrew Pack 25.00 SEM7830-72Standard Cover 100.00 1260-TORXScrew Pack 40.00 SEM7830-268Surface Mount Box 35.00 1260-TBTRXScrew Pack 40.00 SEM7830-516 Magnet Core Assembly 170.00 1260-18Plate 60.00 SEM7830-825Door Armature 130.00 1260-18PAPlate 60.00 SEM7840-515 Fastener Kit 25.00 1260-18QFPlate 60.00 SEM7840-72Standard Cover 100.00 1260-30Cush Shoe Support 20.00 SEM7840-516 Magnet Core Assembly 170.00 1260-37Hold Open Stud 25.00 SEM7840-825Door Armature 130.00 1260-41Hold Open Nut 5.00 SEM7850-515 Fastener Kit & Bracket 25.00 1260-45Hold Open Shoe 20.00 SEM7850-516 Magnet Core Assembly 170.00 1260-49Hold Open Main Arm 65.00 SEM7850-72Standard Cover 100.00 1260-61Spacer 25.00 SEM7850-828Door Armature 190.00 1260-62AAuxiliary Shoe 40.00 1250 Series 1260-62PAPA Shoe 15.00 1250-3071Std Cylinder Assy 125.00 1260-77Arm & Forearm 85.00 1250-3077/PA Reg Arm w/62PA 85.00 1260-78H H Head & Tube 70.00 1250-3077/62AReg Arm w/62A 105.00 1260-78HLHead & Long Tube 75.00 1250-3077LLong Arm 85.00 1260-79Rod & Shoe 30.00 1250-3049/PAHold Open Arm w/62PA 120.00 1260-79LR Long Rod & Shoe 30.00 1250-3049LHold Open Long Arm 125.00 1260-83Arm Screw 3.00 1250-3077EDA EDA Arm 140.00 1260-83HH Arm Screw 3.00 1250-3049EDAHEDA Arm 175.00 1260-146Shaft Cover 5.00 1250-3077CUSH CUSH Arm 155.00 1260-159Arm Screw 3.00 1250-3049CUSH HCUSH Arm 235.00 1260-201Spacer 5.00 1250-3077SCUSHS Cush Arm 235.00 1260-384Stop 20.00 1250-3049SCUSHSpring H Cush Arm 295.00 1260-419Panel Adapter 65.00 1250-UNIVScrew Pack 25.00 1260-3048Head & Tube Assy 85.00 1250-TORXScrew Pack 40.00 1260-3048LHead & Long Tube Assy 85.00 1250-TBTRXScrew Pack 40.00 1260-Flat Box Flat Box w/Label 5.00 1250-72 Slim Cover 15.00 1260-Instruction Sheet Instruction Sheet 3.00 1250-18Plate 60.00 1260-Rebox KitBox & Instruction Sheet 5.00 1250-18PAPlate 60.00 1450 Series 1250-30Cush Shoe Support 20.00 1450-3071Std Cylinder Assy 180.00 NA 1250-61Spacer 20.00 1450-3071DEL Del Action Cylinder Assy 225.00 NA 1250-62AAuxiliary Shoe 40.00 1450-3077/PA Reg Arm w/62PA 85.00 NA 1250-62PAPA Shoe 15.00 1450-3077/62AReg Arm w/62A 85.00 NA 1250-146Shaft Cover 5.00 1450-3077LLong Arm 85.00 NA 1250-201Spacer 5.00 1450-3049/PAH Arm w/62PA 120.00 NA 1250-419Panel Adapter 60.00 1450-3049LH Long Arm 125.00 NA 1250-3080Spring CUSH Block 60.00 1450-3077EDA EDA Arm 140.00 NA 1250-Flat Box Flat Box w/Label 5.00 1450-3077EDA/GEDA Arm w/62G 150.00 NA 1250-Instruction Sheet Instruction Sheet 3.00 1450-3049EDAH EDA Arm 175.00 NA 1250-Rebox KitBox & Instruction Sheet 5.00 1450-3077CNSCush Arm 175.00 NA 1260 Series 1450-3049CNSH Cush Arm 235.00 NA 1261-3071Std Cylinder Assy 205.00 1450-3077SCNSS Cush Arm 235.00 NA 1260-3077Reg Arm 85.00 1450-3049SCNSSpring H Cush Arm 295.00 NA 1260-3077/PA Reg Arm w/62PA 105.00 1450-72Standard Cover 15.00 NA 1260-3077/62AReg Arm w/62A 90.00 1450-72FCFull Plastic Cover 25.00 NA 1260-3077LLong Arm 85.00 1450-72MCFull Metal Cover 45.00 NA	STANDARD POWDER	STANDARD POWDER
	COAT	COAT	US 11 US 15 US 26











































			NA
			NA
			NA NA
			NA
			NA
			NA
			NA
			NA
			NA
			NA
			NA
			NA
			NA
			NA
			NA
			NA
1260-3049Hold Open Arm 115.00 1450 Series continued on next page

		STANDARD POWDER		PLATED FINISHES		STANDARD POWDER		PLATED FINISHES
	PARTS & ACCESSORIES	COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	PARTS & ACCESSORIES	COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26
1450 Series continued					1460-49Hold Open Main Arm	65.00
	1450-72ALTAlternate Cover	25.00	NA	NA	1460-61Spacer	25.00	70.00		100.00
	1450-UNIVScrew Pack	25.00	NA	NA	1460-62AAuxiliary Shoe	40.00	100.00		130.00
	1450-TORXScrew Pack	40.00	NA	NA	1460-62PAPA Shoe	15.00	90.00		120.00
	1450-TBTRXScrew Pack	40.00	NA	NA	1460-77Arm & Forearm	85.00
	1450-18Plate	60.00	NA	NA	1460-77HDHeavy Duty Arm & Forearm	115.00
	1450-18FCPlate	60.00	NA	NA	1460-78H H Head & Tube	70.00
	1450-18PAPlate	60.00	NA	NA	1460-78HLHead & Long Tube	75.00
	1450-18PAFCPlate	60.00	NA	NA	1460-79Rod & Shoe	30.00	75.00		105.00
	1450-30Cush Shoe Support	20.00	NA	NA	1460-79LR Long Rod & Shoe	30.00	75.00		105.00
	1450-31 Cover Screw	3.00	NA	NA	1460-83Arm Screw	3.00
	1450-61Spacer	20.00	NA	NA	1460-83HH Arm Screw	3.00
	1450-62AAuxiliary Shoe	40.00	NA	NA	1460-124Plug 1460-146Shaft Cover	3.00 5.00
	1450-62PAPA Shoe	15.00	NA	NA	1460-159Arm Screw	3.00
	1450-146Shaft Cover	5.00	NA	NA	1460-163Arm Insert	3.00
	1450-419Panel Adapter 1450-3080 Spring Cush Block	60.00 60.00	NA NA	NA NA	1460-201Spacer	5.00
	1450-Flat Box Flat Box w/Label	5.00	NA	NA	1460-384Stop	20.00
	1450-Instruction Sheet Instruction Sheet	3.00	NA	NA	1460-419Panel Adapter	65.00	150.00		180.00
	1450-Rebox KitBox & Instruction Sheet	5.00	NA	NA	1460-3048Head & Tube Assy	85.00	160.00		190.00
					1460-3048LHead & Long Tube Assy	85.00	160.00		190.00
1460 Series					1460-3080 Spring Cush Block	60.00
	1461-3071Std Cylinder Assy	265.00			1460-3373Adapter Kit	5.00
	1461-3071DEL Del Action Cylinder Assy	310.00			1460-Flat Box Flat Box w/Label	5.00
	1460-3077Reg Arm	85.00	305.00	335.00	1460-Instruction Sheet Instruction Sheet	3.00
	1460-3077/PA Reg Arm w/62PA	90.00	310.00	340.00	1460-Rebox KitBox & Instruction Sheet	5.00
	1460-3077/62AReg Arm w/62A	105.00	325.00	355.00	1460T Series
	1460-3077HDHeavy Duty Arm	120.00	340.00	370.00
	1460-3077HD/PAHD Arm w/62PA	120.00	340.00	370.00	1460T-3071Std Cylinder Assy 1461T-3071Std Cylinder Assy	265.00 265.00
	1460-3077HD/62AHD Arm w/62A	140.00	360.00	390.00	1460T-3077T Standard Arm	90.00	230.00		270.00
	1460-3077HD/LHD Long Arm	125.00	345.00	375.00	1460T-3038Standard Track	75.00
	1460-3077LLong Arm	85.00	305.00	335.00	1460T-3038B Track w/Bumper	80.00
	1460-3049Hold Open Arm 1460-3049/PAH Arm w/62PA	115.00 120.00	335.00 340.00	365.00 370.00	1460T-3038HTrack w/Hold Open	100.00
	1460-3049LH Long Arm	125.00	345.00	375.00	1460T-3038HB Track w/Hold Open & Bumper	110.00
	1460-3077EDA EDA Arm	140.00	360.00	390.00	1460T-72Standard Cover	15.00
	1460-3077EDA/GEDA Arm w/62G	150.00	370.00	400.00	1460T-72DS1Designer Series Cover	45.00	165.00		205.00
	1460-3049EDAH EDA Arm	175.00	395.00	425.00	1460T-72FCFull Cover	25.00
	1460-3049EDA/GH EDA Arm w/62G	185.00	405.00	435.00	1460T-SRTScrew Pack (incl -3034)	50.00	70.00		85.00
	1460-3077CNSCush Arm	175.00	395.00	425.00	1460T-TBSRTScrew Pack (incl -3034)	50.00	70.00		85.00
	1460-3049CNSH Cush Arm	235.00	455.00	485.00	1460T-WMSScrew Pack (incl -3034)	50.00	70.00		85.00
	1460-3077SCNSS Cush Arm	235.00	455.00	485.00	1460T-TBWMSScrew Pack (incl -3034)	50.00	70.00		85.00
	1460-3049SCNSSpring H Cush Arm	295.00	515.00	545.00	1460T-TORXScrew Pack (incl -3034)	65.00	85.00		100.00
	1460-72Standard Cover	15.00			1460T-TBTRXScrew Pack (incl -3034)	65.00	85.00		100.00
	1460-72DS1Designer Series Cover	45.00	165.00	205.00	1460T-HSRTHO Screw Pack (incl -3034H)	50.00	70.00		85.00
	1460-72FCFull Cover	25.00			1460T-HTBSRTHO Screw Pack (incl -3034H)	50.00	70.00		85.00
	1460-SRTScrew Pack	25.00	45.00	60.00	1460T-HWMSHO Screw Pack (incl -3034H)	50.00	70.00		85.00
	1460-TBSRTScrew Pack	25.00	45.00	60.00	1460T-HTBWMSHO Screw Pack (incl -3034H)	50.00	70.00		85.00
	1460-WMSScrew Pack	25.00	45.00	60.00	1460T-HTORXHO Screw Pack (incl -3034H) 1460T-HTBTRXHO Screw Pack (incl -3034H)	50.00 50.00	70.00 70.00		85.00 85.00
	1460-TBWMSScrew Pack	25.00	45.00	60.00	1460T-18Plate	60.00
	1460-TORXScrew Pack	40.00	60.00	75.00	1460T-18DSPlate	60.00	210.00		240.00
	1460-TBTRXScrew Pack	40.00	60.00	75.00	1460T-18FCPlate	60.00
	1460-18Plate 1460-18DSPlate	60.00 60.00	210.00	240.00	1460T-18GFCPlate	60.00
	1460-18FCPlate	60.00			1460T-18PAPlate	60.00
	1460-18PAPlate	60.00			1460T-18PADSPlate	60.00	210.00		240.00
	1460-18PADSPlate	60.00	210.00	240.00	1460T-18PAFCPlate	60.00
	1460-18PAFCPlate	60.00			1460T-30A Mounting Bracket	7.00
	1460-30Cush Shoe Support	20.00	65.00	95.00	1460T-73End Cap	10.00
	1460-30A Mounting Bracket	7.00			1460T-78Arm & Tube	75.00
	1460-37Hold Open Stud	25.00			460T-82Rod	60.00
	1460-41Hold Open Nut	5.00			1460T-83HH Arm Screw	3.00
	1460-45Hold Open Shoe	20.00
					1460T Series continued on next page

	STANDARD POWDER COAT	PLAT	ED FINI	SHES		STANDARD POWDER COAT	PLAT	ED FINI	SHES
PARTS & ACCESSORIES	FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26	PARTS & ACCESSORIES	FINISHES ANCLR ANDKB	US26D	US 3 US 4 US 10	US 11 US 15 US 26
1460T Series continued					2030-3034H Hold Open Track Roll
1460T-141-1Plug	3.00				2030-3054Hold Open Cl
1460T-141-2Plug	3.00				2030-SPL-3034P-1152 Roll
1460T-146Shaft Cover	5.00				2030-SPL-3038P-1224 Trac
1460T-159Arm Screw	3.00				2030-3064HHO Roller and Cl
1460T-163Arm Insert	3.00				2030-Flat BoxFlat Box w/Lab
1460T-169Bumper Assy	20.00				2030-Instruction SheetInstruction Shee
1460T-425Roller Lock Screw	5.00				2030-Rebox KitBox & Instruction Shee	et 5.00
1460T-3034Track Roller	30.00				2210 Sories
1460T-3034HHold Open Track Roller	30.00				2210 Series	750.00	10/000		1160.00
1460T-3054Hold Open Clip	30.00				2213(4,5)-3071Std Cylinder As		1,040.00		1,160.00
1460T-Flat BoxFlat Box w/Label	5.00				2213(4,5)-3071AVBAVB Cylinder As:		1,065.00		1,185.00
1460T-Instruction Sheet Instruction Sheet	3.00				2210-3077TStandard Ari		340.00		370.00
1460T-Rebox KitBox & Instruction Sheet	5.00				2210-72Finish Plate (11&12
2010 Corios					2210-3038Standard Trac		70.00		0F 00
2010 Series	/O= 00				2210-TORXScrew Pag 2210-11Finish Plai		70.00		85.00
2011(3,4,5,6)-3071Std Cylinder Assy	485.00	2/0.00	_	70.00	2210-11Finish Plai		75.00 75.00		105.00 105.00
2010-3077T Standard Arm		340.00	3	70.00	2210-31Cover Scre		/5.00		105.00
2010-3038Standard Track	75.00				2210-51
2010-3038B Track w/Bumper	80.00				2210-139
2010-3038HTrack w/Hold Open	100.00				2210-5054
2010-3038HB Track w/Hold Open & Bumper	110.00	70.00		05.00	2210-Flat Box W/Lab 2210-Instruction SheetInstruction Shee
2010-WMSScrew Pack (incl -3034)	50.00	70.00		85.00	2210-Rebox KitBox & Instruction Shee
2010-TORXScrew Pack (incl -3034)	65.00	85.00		00.00		5.00
2010-HWMSHO Screw Pack (incl -3034H) 2010-HTORXHO Screw Pack (incl -3034H)	50.00	70.00		85.00	2210DPS Series
2010-HTORXHO Screw Pack (Inct -3034H) 2010-11Finish Plate	65.00 50.00	85.00 200.00		00.00	2213(4,5)DPS-3071Std Cylinder Ass	sy 860.00	1,150.00		1,270.00
2010-31Cover Screw	3.00	200.00	2	30.00	2213(4,5)DPS-3071AVBAVB Cylinder Ass	sy 885.00	1,175.00		1,295.00
2010-31Arm Screw	3.00				2210DPS-3077TStandard Ari		340.00		370.00
2010-159	20.00				2210DPS-72 Finish Plate (11&12		345.00		465.00
2010-420Fire Shield	65.00				2210DPS-3038Standard Trac
2010-425Roller Lock Screw	5.00				2210DPS-TORXScrew Pag		70.00		85.00
2010-3034 Track Roller	30.00				2210DPS-11Finish Plat		75.00		105.00
2010-3034H Hold Open Track Roller	30.00				2210DPS-12Short Finish Plai		75.00		105.00
2010-3054Hold Open Clip	30.00				2210DPS-31Cover Scre
2010-SPL-3034P-1152 Roller	40.00				2210DPS-159Arm Scre
2010-SPL-3038P-1224 Track	75.00				2210DPS-493DPS Test K
2010-3064HHO Roller and Clip	60.00				2210DPS-3034Track Rolli 2210DPS-3340
2010-Flat BoxFlat Box w/Label	5.00				2210DPS-Flat Box Flat Box w/Lab
2010-Instruction SheetInstruction Sheet	3.00				2210DPS-Instruction SheetInstruction Sheet
2010-Rebox KitBox & Instruction Sheet	5.00				2210DPS-Rebox KitBox & Instruction Shee
2030 Series	025.00	1 225 66		/F.00	2310ME Series
2031(2,3,4,5)-3071Std Cylinder Assy	935.00	1,225.00	1,3	45.00	2314ME-3071Std Cylinder As:	sy 1,075.00	1,225.00		1,285.00
2031(2,3,4,5)-3971		3/0.00	2	70.00	2314ME-3071B80B80 Cylinder Ass		1,300.00	1	,360.00
2030-3077T Standard Arm	120.00	340.00	3	70.00	2314ME-3071B140B140 Cylinder Ass	sy 1,150.00	1,300.00	1	,360.00
2030-3038 Standard Track 2030-3038B Track w/Bumper					2314ME-3971Cylinder On	ly 1,075.00	1,225.00		1,285.00
	80.00				2314ME-3971B80 B80 Cylinder On	ly 1,150.00
2030-3038HTrack w/Hold Open 2030-3038HBTrack w/Hold Open & Bumper	100.00				2314ME-3971B140B140 Cylinder On	ly 1,150.00
2030-WMSScrew Pack (incl -3034)	110.00 50.00	70.00		85.00	2310ME-3077TStandard Art	m 115.00	335.00		365.00
2030-TORXScrew Pack (Incl -3034)	65.00	85.00		00.00	2310ME-72 Finish Plate (11&12		205.00		265.00
2030-HWMSHO Screw Pack (incl -3034)	50.00	70.00		85.00	2310ME-3038 Standard Trac
2030-HTORXHO Screw Pack (incl -3034H)	65.00	85.00		00.00	2310ME-WMSScrew Pack (incl -3034		70.00		85.00
2030-159Arm Screw	3.00	33.00	1	_ 0.00	2310ME-TORXScrew Pack (incl -3034		85.00		100.00
2030-169Bumper Assy	20.00				2310ME-11		75.00		105.00
2030-416Wood Clip Set		230.00	21	60.00	2310ME-12Short Finish Plai		75.00		105.00
2030-417Wood Clip Set	160.00	230.00		60.00	2310ME-31Cover Scre
2030-420Fire Shield	65.00				2310ME-159Arm Scre
2030-425Roller Lock Screw	5.00				2310ME-172Wiring Cov
2030-3002 Mounting/Finish Plate	150.00	290.00			2310ME-420Fire Shie 2310ME-425Roller Lock Scre
2030-3034 Track Roller	30.00				2310ME-425Track Roller
*Description of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of the second of						.,
*Require length - please note when ordering					2310ME Series continued on next page

COAT COAT US26D US 3 US 11 US26D US 3 US 11 FINISHES FINISHES US 4 US 15 US 4 US 15 AL (689) AL (689) US 10 US 26 US 10 US 26 DKBRZ (695) DKBRZ (695) PARTS & ACCESSORIES PARTS & ACCESSORIES BRASS (696) BRASS (696) LTBRZ (691) LTBRZ (691) STAT (690) STAT (690) BLACK (693) BLACK (693) 2810-572DDDouble Door Header Only 483.00 2810-572DD/SDouble Door Header Only w/Stop Prep 483.00 75.00 2810-3018Rear Mount Bracket 105.00 75.00 2810-3072* Concealing Channel 234.00 90.00 2810-3107Bottom Pivot Assembly 168.00 5.00 2810-3155 Label Kit 30.00 3.00 2810-3454Motor Gearbox 2,375.00 5.00 2810-3462Controller 1,550.00 2610 Series 2850 Series - (ANCLR or ANDKB only) 2613(4)-3071Std Cylinder Assy 2,090.00 2,380.00 2,500.00 2850-3077CPCenter Pivot Arm 500.00 2613(4)-3071DPSDPS Cylinder Assy 2,200.00 2,490.00 2,610.00 2850-3077OPOffset/Butt Hung Arm 500.00 2613(4)-3971 Cylinder Only 1,535.00 2850-3077OPCMOffset Arm w/Track & Conc Channel 440.00 2613(4)-3971DPSDPS Cylinder Only 1,645.00 2850-3572HLHeader Asy 600.00 2610-3077T Standard Arm 120.00 340.00 370.00 2850-3572HL/SHeader Asy w/Stop Prep 600.00 2610-3038Standard Track 75.00 2850-MS-HDR Screw Pack Header 25.00 2610-WMSScrew Pack (incl -3034) 50.00 70.00 85.00 2850-MS-CPScrew Pack Center Pivot 25.00 2610-61Spacer 15.00 2850-MS-OP Screw Pack Offset Pivot 25.00 2610-78Arm & Tube 75.00 2850-11ASpindle Plate - 2 3/4" 80.00 2610-82Rod 60.00 2850-11BSpindle Plate - 3 3/4" 80.00 2610-83HH Arm Screw 3.00 2850-12Blank Filler Plate 95.00 2610-155-1Caution Decal 5.00 2850-78Arm & Tube 210.00 2610-155-2Activation Decal 5.00 2850-82Rod 120.00 2610-159Arm Screw 3.00 2850-107Pivot Body 70.00 2610-425Roller Lock Screw 5.00 2850-110Pivot Post 55.00 2610-3002 Mounting/Finish Plate 150.00 440.00 470.00 2850-117 Bottom Pivot Plate 55.00 2610-3034Track Roller 30.00 2850-168Slide 40.00 2610-Flat Box Flat Box w/Label 5.00 2850-275Mounting Bracket - 2 3/4" 110.00 2610-Instruction Sheet Instruction Sheet 3.00 2850-334Header Endcaps 45.00 2610-Rebox KitBox & Instruction Sheet 5.00 2850-334-2End Cap 80.00 2810 Series - (ANCLR or ANDKB only) 2850-375Mounting Bracket - 3 3/4" 105.00 2810-3077CPCenter Pivot Arm 250.00 2850-384BBreakaway Door Stop 155.00 2810-3077OPOffset/Butt Hung Arm 250.00 2850-384FFixed Door Stop 75.00 2810-3077OPCMOffset Arm w/Track & Conc Channel 440.00 2850-511Dress Plate Extrusion Only 20/ft 2810-3572HLHeader Asy 355.00 2850-518Cable/Parts Bag 95.00 2810-3572HL/SHeader Asy w/Stop Prep 355.00 2850-572Header Extrusion Only 55/ft 2810-3572DDDouble Door Header Asy 600.00 2850-572HLHeader Only 483.00 2810-3572DD/SDouble Door Header Asy w/Stop Prep 605.00 2850-572HL/SHeader Only w/Stop Prep 483.00 2810-3572DD/MPDouble Door Header w/Manual Prep 850.00 2850-982 Companion Cable 70.00 2810-MS-HDR Screw Pack Header 25.00 2850-3018Rear Mount Bracket 105.00 2810-MS-CPScrew Pack Center Pivot 25.00 2810-3072MPConcealing Channel-Manual Prep 234.00 2810-MS-OP Screw Pack Offset Pivot 25.00 2850-3107Bottom Pivot Assembly 168.00 2810-11ASpindle Plate - 2 3/4" 80.00 2850-3155 Label Kit 30.00 80.00 2850-3454Motor Gearbox (Std Force) 2,375.00 95.00 2850-3462Controller 1,550.00 210.00 2860 Series - (ANCLR or ANDKB only) 120.00 2860-3077CPCenter Pivot Arm 600.00 70.00 2860-3077OPOffset/Butt Hung Arm 600.00 55.00 2860-3077OPCMOffset Arm w/Track & Conc Channel 440.00 55.00 2860-3572HLHeader Asy 605.00 40.00 2860-3572HL/SHeader Asy w/Stop Prep 605.00 110.00 2860-MS-HDR Screw Pack Header 25.00 45.00 2860-MS-CPScrew Pack Center Pivot 25.00 80.00 2860-MS-OP Screw Pack Offset Pivot 25.00 105.00 2860-11ASpindle Plate - 2 3/4" 80.00 155.00 2860-11BSpindle Plate - 3 3/4" 80.00 75.00 2860-12Blank Filler Plate 95.00 20/ft 2860-78Arm & Tube 210.00 95.00 2860-82Rod 120.00 55/ft 2860-107Pivot Body 70.00 228.00 2860-110Pivot Post 55.00 2810-572HL/SHeader Only w/Stop Prep 228.00		STANDARD POWDER	PLATED FINISHES		STANDARD POWDER	PLATED FINISHES

	2310ME Series continued
	2310ME-3210Transformer
	2310ME-3431Input Jumper
	2310ME-3351ME Switch Assy
	2310ME-Flat Box Flat Box w/Label
	2310ME-Instruction Sheet Instruction Sheet
	2310ME-Rebox KitBox & Instruction Sheet


































	2810-11BSpindle Plate - 3 3/4"
	2810-12*Blank Filler Plate
	2810-78Arm & Tube
	2810-82Rod
	2810-107Pivot Body
	2810-110Pivot Post
	2810-117 Bottom Pivot Plate
	2810-168Slide
	2810-275Mounting Bracket - 2 3/4"
	2810-334Header Endcaps
	2810-334-2End Cap
	2810-375Mounting Bracket - 3 3/4"
	2810-384BBreakaway Door Stop
	2810-384FFixed Door Stop
	2810-511*Dress Plate Extrusion Only
	2810-518Cable/Parts Bag
	2810-572*Header Extrusion Only
	2810-572HL*Header Only

	STANDARD POWDER		PLATED FINISHES			STANDARD POWDER		PLATED FINISHES
PARTS & ACCESSORIES	COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26	PARTS & ACCESSORIES	COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26
2860 Series continued					3130SE Series
2860-117 Bottom Pivot Plate	55.00				3133(4)SE-3071Std Cylinder Assy	395.00
2860-168Slide	40.00				3130SE-3077T Standard Arm	115.00	335.00		365.00
2860-275Mounting Bracket - 2 3/4"	110.00				3130SE-3077LLong Arm	125.00	345.00		375.00
2860-334Header Endcaps	45.00				3130SE-3038Standard Track	405.00
2860-334-2End Cap	80.00				3130SEL-3038SELLong Track	405.00
2860-375Mounting Bracket - 3 3/4"	105.00				3130SE-WMSScrew Pack (incl81)	25.00	45.00		60.00
2860-384BBreakaway Door Stop	155.00				3130SE-TORXScrew Pack (incl81)	40.00	60.00		75.00
2860-384FFixed Door Stop 2860-511*Dress Plate Extrusion Only	75.00 20.00 / ft				3130SE-59ACover Plate	5.00
2860-518Cable/Parts Bag	95.00				3130SE-60Cover Plate Screw 3130SE-73End Cap	3.00 10.00
2860-572*Header Extrusion Only	57.00 / ft				3130SE-78Arm & Tube	75.00
2860-572HL*Header Only	483.00				3130SE-81Connector w/Ring	5.00
2860-572HL/S*Header Only w/Stop Prep	483.00				3130SE-82Rod	60.00
2860-3018Rear Mount Bracket	105.00				3130SE-83HH Arm Screw	3.00
2860-3107Bottom Pivot Assembly	168.00				3130SE-159Arm Screw	3.00
2860-3155 Label Kit	90.00				3130SE-3034SE Track Roller with Slider	35.00
2860-3454Motor Gearbox (Std Force)	2,375.00				3130SE-425Roller Lock Screw	5.00
2860-3462 Control Box	1,550.00				3130SE-3210Transformer	75.00
					3130SE-3436On/off Switch Assy	75.00
3030 Series					3130SE-Flat Box Flat Box w/Label	5.00
3031(2,3,4)-3071Std Cylinder Assy	350.00				3130SE-Instruction Sheet Instruction Sheet	3.00
3030-3077Reg Arm	120.00	340.00		370.00	3130SE-Rebox KitBox & Instruction Sheet	5.00
3030-3049Hold Open Arm	120.00	340.00		370.00	4000T Series
3030-WMSScrew Pack 3030-TORXScrew Pack	25.00 40.00	45.00 60.00		60.00 75.00	4003(4)T-3071Std Cylinder Assy	350.00
3030-37Hold Open Stud	25.00				4000T-3077T Standard Arm	115.00	335.00		365.00
3030-41Hold Open Nut	6.00				4000T-3038Standard Track	65.00
3030-48Hold Open Forearm	70.00				4000T-72Standard Cover	25.00
3030-49Hold Open Main Arm	65.00				4000T-72MCMetal Cover	40.00	215.00		265.00
3030-77Arm & Forearm	85.00				4000T-WMSScrew Pack (incl -3034)	50.00	70.00		85.00
3030-79Rod & Shoe	30.00	75.00		105.00	4000T-TBWMSScrew Pack (incl -3034)	50.00	70.00		85.00
3030-79HH Rod & Shoe	30.00	75.00		105.00	4000T-TORXScrew Pack (incl -3034)	65.00	85.00		100.00
3030-83Arm Screw	3.00				4000T-TBTRXScrew Pack (incl -3034)	65.00	85.00		100.00
3030-83HH Arm Screw	3.00				4000T-31 Cover Screw	3.00
3030-159Arm Screw	3.00				4000T-61Spacer	15.00
3030-421Arm Stud	10.00				4000T-73End Cap	10.00
3030-Flat Box Flat Box w/Label	4.00				4000T-141-2Plug	3.00
3030-Instruction Sheet Instruction Sheet	3.00				4000T-159Arm Screw	3.00
3030-Rebox KitBox, Inst., & Screw Pk	5.00				4000T-425Roller Lock Screw	5.00
3130 Series					4000T-3034Track Roller 4000T-Flat Box Flat Box w/Label	30.00 5.00
3131(2,3)-3071Std Cylinder Assy	375.00				4000T-Instruction Sheet Instruction Sheet	3.00
3130-3077T Standard Arm	120.00	340.00		370.00	4000T-Rebox KitBox & Instruction Sheet	5.00
3130-3038Standard Track	75.00
3130-3038B Track w/Bumper	80.00				4010 Series
3130-3038HTrack w/Hold Open	100.00				4011(6)-3071Std Cylinder Assy	350.00
3130-3038HB Track w/Hold Open & Bumper	110.00				4011-3071DELDel Act Cyl Assy	395.00
3130-WMSScrew Pack (incl -3034)	50.00	70.00		85.00	4011(6)-3071TELTEL Cylinder Assy	395.00
3130-TORXScrew Pack (incl -3034)	65.00	85.00		100.00	4010-3077Reg Arm	120.00	340.00		370.00
3130-HWMSHO Screw Pack (incl -3034H)	50.00	70.00		85.00	4010-3049Hold Open Arm	175.00	395.00		425.00
3130-HTORXHO Screw Pack (incl -3034H) 3130-2Channel	65.00 10.00	85.00		100.00	4010-3049FLFL Arm 4010-72Standard Cover	270.00 25.00
3130-159Arm Screw	3.00				4010-72MCMetal Cover	40.00	215.00		265.00
3130-169Bumper Assy	20.00				4010-SRTScrew Pack	25.00	45.00		60.00
3130-425Roller Lock Screw	5.00				4010-TBSRTScrew Pack	25.00	45.00		60.00
3130-3034Track Roller	30.00				4010-WMSScrew Pack	25.00	45.00		60.00
3130-3034H Hold Open Track Roller	30.00				4010-TBWMSScrew Pack	25.00	45.00		60.00
3130-3054Hold Open Clip	30.00				4010-TORXScrew Pack	40.00	60.00		75.00
3130-Flat Box Flat Box w/Label	5.00				4010-TBTRXScrew Pack	40.00	60.00		75.00
3130-Instruction Sheet Instruction Sheet	3.00				4010-18Plate	60.00	210.00		240.00
3130-Rebox KitBox & Instruction Sheet	5.00				4010-28Fusible Link	12.00
					4010-31 Cover Screw	3.00
					4010 Series continued on next page

	STANDARD POWDER	PLAT	ED FINIS	HES		STANDARD POWDER	PLAT	ED FINISH	IES
PARTS & ACCESSORIES	COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26	PARTS & ACCESSORIES	COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26
4010 Series continued					4021(6)-3071TELTEL Cylinder As
4010-37Hold Open Stud					4020-3077Reg Al		340.00		70.00
4010-37FLFL Hold Open Stud	25.00				4020-3077LLong A		345.00		375.00
4010-41Hold Open Nut					4020-3049Hold Open A		395.00	) 4.	25.00
4010-48Hold Open Forearm 4010-49Hold Open Main Arm					4020-3049FLFL Al 4020-72Standard Cov
4010-49FLFL Main Arm & Rod	65.00				4020-72MCMetal Cov		215.00	) 26	65.00
4010-77Arm & Forearm					4020-SRTScrew Pa		45.00		60.00
4010-79Rod & Shoe		75.00	10	05.00	4020-TBSRTScrew Pa		45.00		60.00
4010-79HH Rod & Shoe		75.00		05.00	4020-WMSScrew Pa		45.00		60.00
4010-79LRLong Rod & Shoe	30.00	75.00	10	05.00	4020-TBWMSScrew Pa	ick 25.00	45.00	) 6	60.00
4010-83Arm Screw	3.00				4020-TORXScrew Pa		60.00	) :	75.00
4010-83HH Arm Screw	3.00				4020-TBTRXScrew Pa		60.00		75.00
4010-95Arm Stud	15.00				4020-18Pla		210.00		40.00
4010-107 REGMetal Template					4020-18G		210.00	) 24	40.00
4010-159Arm Screw	3.00				4020-28Fusible Li
4010-Flat BoxFlat Box w/Label	5.00				4020-31Cover Scre 4020-37Hold Open St
4010-Instruction Sheet					4020-37FLFL Hold Open St
4010-Redux Nitbox & Ilistruction Sheet	5.00				4020-41Hold Open N
4010T Series					4020-48Hold Open Foreal
4011(3,4)T-3071Std Cylinder Assy	350.00				4020-49 Hold Open Main Ai
4010T-3077TStandard Arm		335.00	36	55.00	4020-49FLFL Main Arm & R
4010T-3077DE		370.00	40	00.00	4020-77Arm & Forea
4010T-3038Standard Track					4020-79Rod & Sh	oe 30.00	75.00	) 10	05.00
4010T-3038BTrack w/Bumper	80.00				4020-79HH Rod & Sh		75.00		05.00
4010T-3038HTrack w/Hold Open 4010T-3038HBTrack w/Hold Open & Bumper	100.00 110.00				4020-79LRLong Rod & Sh		75.00	) 10	05.00
4010T-72Standard Cover					4020-83Arm Scre
4010T-72MCMetal Cover	40.00	215.00	26	55.00	4020-83HH Arm Scre
4010T-SRTScrew Pack (incl -3034)	50.00	70.00		35.00	4020-159Arm Scre 4020-Flat BoxFlat Box w/Lat
4010T-TBSRTScrew Pack (incl -3034)	50.00	70.00		35.00	4020-riat Box	et 3.00
4010T-WMSScrew Pack (incl -3034)	50.00	70.00	8	35.00	4020-Rebox KitBox & Instruction She
4010T-TBWMSScrew Pack (incl -3034)	50.00	70.00	8	35.00
4010T-TORXScrew Pack (incl -3034)	65.00	85.00		00.00	4020T Series
4010T-TBTRXScrew Pack (incl -3034)	65.00	85.00		00.00	4021(3,4)T-3071Std Cylinder As	•	225.00		CE 00
4010T-HSRTHO Screw Pack (incl -3034H)	50.00	70.00		35.00	4020T-3077TStandard Al 4020T-3038Standard Tra		335.00	) 36	65.00
4010T-HTBSRTHO Screw Pack (incl -3034H) 4010T-HWMSHO Screw Pack (incl -3034H)	50.00 50.00	70.00 70.00		35.00 35.00	4020T-3038BTrack w/Bump
4010T-HTBWMSHO Screw Pack (incl -3034H)	50.00	70.00		35.00	4020T-3038H Track w/Hold Op
4010T-HTORXHO Screw Pack (incl -3034H)	65.00	85.00		00.00	4020T-3038HBTrack w/Hold Open & Bump
4010T-HTBTRXHO Screw Pack (incl -3034H)	65.00	85.00		00.00	4020T-72Standard Cov
4010T-18Plate	60.00	210.00	24	40.00	4020T-72MCMetal Cov		215.00	) 26	65.00
4010T-31Cover Screw	3.00				4020T-SRTScrew Pack (incl -303	*	70.00		85.00
4010T-73End Cap					4020T-TBSRT Screw Pack (incl -303	,	70.00		85.00
4010T-78DEMain Arm & Tube					4020T-WMSScrew Pack (incl -303	,	70.00		85.00
4010T-82Rod					4020T-TBWMSScrew Pack (incl -303 4020T-TORXScrew Pack (incl -303	,	70.00		85.00
4010T-83HH Arm Screw 4010T-141-2Plug					4020T-TBTRXScrew Pack (incl -303	*	85.00 85.00		00.00
4010T-159Arm Screw					4020T-HSRTHO Screw Pack (incl -3034	*	70.00		85.00
4010T-169Bumper Assy					4020T-HTBSRTHO Screw Pack (incl -3034		70.00		85.00
4010T-425Roller Lock Screw					4020T-HWMSHO Screw Pack (incl -3034		70.00		85.00
4010T-3034Track Roller					4020T-HTBWMSHO Screw Pack (incl -3034	*	70.00		85.00
4010T-3034HHO Track Roller	30.00				4020T-HTORXHO Screw Pack (incl -3034		85.00		00.00
4010T-3054Hold Open Clip					4020T-HTBTRXHO Screw Pack (incl -3034		85.00		00.00
4010T-3064HHold open Clip and Roller	60.00				4020T-18Pla		210.00	) 24	40.00
4010T-Flat BoxFlat Box w/Label	5.00				4020T-31Cover Scre
4010T Pobox Kit Pox & Instruction Sheet					4020T-73End C
4010T-Rebox KitBox & Instruction Sheet	5.00				4020T-141-2Pl 4020T-159Arm Scre	-
4020 Series					4020T-169Bumper As
4021(6)-3071Std Cylinder Assy					4020T-425Roller Lock Scre	•
4021-3071DELDel Act Cyl Assy	395.00
					4020T Series continued on next page

STANDARD POWDER		STANDARD POWDER
COAT		COAT	US 11 US 15 US 26









			370.00
			370.00


			425.00

			435.00
			410.00
			415.00
			450.00
			460.00
			440.00
			510.00
			515.00
			565.00



			60.00
			60.00
			75.00
			75.00
			240.00
			240.00
			240.00










			100.00
			130.00



			105.00
			105.00
			180.00





	4040XP Series continued on next page

	STANDARD POWDER	PLAT	ED FINIS	SHES		STANDARD POWDER	PLAT	ED FINI	SHES
PARTS & ACCESSORIES	COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26	PARTS & ACCESSORIES	COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26
4040XP Series continued					4040SE-3077DEDE Ar	m 165.00	385.00	)	415.00
4040XP-107EDAMetal Template	265.00				4040SE-3038Standard Tra	ck 405.00
4040XP-107REGMetal Template					4040SEL-3038SELLong Tra
4040XP-107PAMetal Template					4040SE-72Standard Cov	er 25.00
4040XP-124Plug	3.00				4040SE-72MCMetal Cov		215.00	)	265.00
4040XP-159Arm Screw	3.00				4040SE-WMSScrew Pack (inc8		45.00		60.00
4040XP-201Spacer					4040SE-TBWMSScrew Pack (inc8		45.00		60.00
4040XP-384Stop					4040SE-TORXScrew Pack (inc8		60.00		75.00
4040XP-419Panel Adapter		150.00	1	80.00	4040SE-TBTRXScrew Pack (inc8		60.00		75.00
4040XP-3048Head & Tube Assy					4040SE-18Pla		210.00		240.00
4040XP-3048LHead & Long Tube Assy					4040SE-18PAPla		210.00	)	240.00
4040XP-3080Spring Cush Block Assy (incl -58 & -80					4040SE-31Cover Scre
4040XP-3107TMetal Template Set	1,050.00				4040SE-59ACover Pla 4040SE-60Cover Plate Scre
4040XP-Flat Box					4040SE-61Spac
4040XP-Instruction Sheet					4040SE-73End Ca
4040XP-Rebox KitBox & Instruction Sheet	5.00				4040SE-78Arm & Tul
4040XPT Series					4040SE-78DEMain Arm & Tul
4040XPT-3071Std Cylinder Assy	380.00				4040SE-81Connector w/Rii
4040XPT-3077TStandard Arm	115.00	335.00	3	865.00	4040SE-82Ro
4040XPT-3077DEDE Arm	165.00	385.00	4	415.00	4040SE-83HH Arm Scre
4040XPT-3038Standard Track	75.00				4040SE-141Pli
4040XPT-3038BTrack w/Bumper					4040SE-141-1Pli	Jg 3.00
4040XPT-3038HTrack w/Hold Open	100.00				4040SE-141-2Pli	Jg 3.00
4040XPT-3038HB Track w/Hold Open & Bumper					4040SE-159Arm Scre
4040XPT-72Standard Cover					4040SE-425Roller Lock Scre
4040XPT-72MCMetal Cover		215.00		265.00	4040SE-3034SETrack Roller with slid
4040XPT-SRTScrew Pack (incl -3034)		70.00		85.00	4040SE-3210SE Transform
4040XPT-TBSRTScrew Pack (incl -3034)	50.00	70.00		85.00	4040SE-3436On/Off Switch As
4040XPT-WMSScrew Pack (incl -3034) 4040XPT-TBWMSScrew Pack (incl -3034)	50.00 50.00	70.00 70.00		85.00 85.00	4040SE-Flat BoxFlat Box w/Lab
4040XPT-TORXScrew Pack (Incl -3034)	65.00	85.00		00.00	4040SE-Instruction Sheet
4040XPT-TBTRXScrew Pack (incl -3034)	65.00	85.00		00.00	40405E-REDOX KILBOX & INSTRUCTION SHE	et 5.00
4040XPT-HSRTHO Screw Pack (incl -3034)		70.00		85.00	4040SEH Series
4040XPT-HTBSRT HO Screw Pack (incl -3034H)	50.00	70.00		85.00	4040SEH-3077SEHSEH Ar		400.00	)	430.00
4040XPT-HWMS HO Screw Pack (incl -3034H)	50.00	70.00		85.00	4040SEH-3038Standard SEH Tra	ck 405.00
4040XPT-HTBWMSHO Screw Pack (incl -3034H)	50.00	70.00		85.00	4040SEH-59ACover Pla
4040XPT-HTORXHO Screw Pack (incl -3034H)	65.00	85.00	1	00.00	4040SEH-78SEHArm & Tul		240.00		390.00
4040XPT-HTBTRXHO Screw Pack (incl -3034H)	65.00	85.00	1	00.00	4040SEH-82SEHRo		235.00	)	345.00
4040XPT-18Plate		210.00		40.00	4040SEH-83SEHArm Scre
4040XPT-18TJPlate		210.00	2	40.00	4040SEH-3034SEHTrack Roller and Slid	er 35.00
4040XPT-31Cover Screw					4050A Series
4040XPT-54Snap-On Cover Clip Only					4050A-3071Std Cylinder As	sy 300.00
4040XPT-61Spacer					4050A-3071DELDel Cylinder As
4040XPT-73End Cap					4050A-3077/PAReg Arm w/62F
4040XPT-78DEMain Arm & Tube 4040XPT-82Rod					4050A-3077/62AReg Arm w/62
4040XPT-83HH Arm Set Screw					4050A-3077LLong Ar
4040XPT-141-1					4050A-3049/PAH Arm w/62F
4040XPT-141-2					4050A-3049LH Long Ar
4040XPT-159Arm Screw					4050A-3077EDA
4040XPT-169Bumper Assy					4050A-3077EDA/GEDA Arm w/62
4040XPT-425Roller Lock Screw					4050A-3049EDAHEDA Armyy/65
4040XPT-3034Track Roller	30.00				4050A-3077CNS Cush Ar
4040XPT-3034H Hold OpenTrack Roller	30.00				4050A-3077CNSCush Ar 4050A-3049CNSH Cush Ar
4040XPT-3054Hold Open Clip					4050A-3077SCNSS Cush Ar
4040XPT-Flat BoxFlat Box w/Label					4030W 30113CIA32CIAI	203.00
4040XPT-Instruction SheetInstruction Sheet					4050A-3049SCNSSpring H Cush Ar	m 315.00
4040XPT-Rebox KitBox & Instruction Sheet	5.00				4050A-D Rw/pAReg arm w/62PA for Dela
4040SE Series					4050A-D Hw/PAH Arm w/62PA for Dela
4040SE-3071Std Cylinder Assy	380.00				4050A-62DAPAPA shoe for Dela	,
4040SE-3077TStandard Arm		335.00	3	865.00
					4050 Series continued on next page

	STANDARD POWDER COAT	PLAT	ED FINIS	SHES		STANDARD POWDER COAT	PLAT	ED FINISHES	ES
PARTS & ACCESSORIES	FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26	PARTS & ACCESSORIES	FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 4 U	US 11 US 15 US 26
4050A Series continued					4050AT-Instruction SheetInstruction Shee
4050A-31Cover Screw	3.00				4050AT-Rebox KitBox & Instruction Shee	t 5.00
4050A-72Standard Cover	25.00				4110 Series
4050A-72ALTAlternative cover	30.00				4111(6)-3071Std Cylinder Ass	y 325.00
4050A-72MCMetal Cover	40.00				4111(6)-3071AVBAVB Cylinder Ass
4050A-SRTScrew Pack	25.00				4111-3071DELDelay Action Cylinder Ass	•
4050A-TBSRTScrew Pack 4050A-WMSScrew Pack	25.00 25.00				4111(6)-3071TELTEL Cylinder Ass	y 370.00
4050A-TBWMSScrew Pack	25.00 25.00				4110-3077EDAEDA Arn	n 160.00	380.00	410.0	00.0
4050A-TORXScrew Pack	40.00				4110-3077EDA/GEDA Arm w/620	6 165.00	385.00	415.0	.00
4050A-TOTAL Screw Pack	40.00				4110-3049EDAH EDA Arn		420.00	450.0
4050A-18Plate	60.00				4110-3049EDA/GH EDA Arm w/620		430.00	460.0
4050A-18GPlate	60.00				4110-3077CNSCush Arn		410.00	440.0
4050A-18PAPlate	60.00				4110-3049CNSH Cush Arn		480.00	510.0
4050A-30Cush Shoe Support	25.00				4110-3077SCNSS Cush Arn		485.00	515.0
4050A-61Spacer	25.00				4110-3049SCNSSpring H Cush Arn		535.00	565.0	.00
4050A-62A Auxiliary Shoe	40.00				4110-3049FLFL Arn 4110-72Standard Cove
4050A-62PAPA Shoe	15.00				4110-72		215.00	265.0	: 00
4050A-419Panel Adapter	65.00				4110-SRTScrew Pac		45.00	60.0
4050A-3080 Spring Cush Block Assy (incl -58 & -80)	65.00				4110-TBSRTScrew Pac		45.00
4050A-Flat BoxFlat Box w/Label	5.00				4110-WMSScrew Pac		45.00	60.0
4050A-Instruction SheetInstruction Sheet	3.00				4110-TBWMSScrew Pac		45.00
4050A-Rebox KitBox & Instruction Sheet	5.00				4110-TORXScrew Pac		60.00		5.00
4050AT Series					4110-TBTRXScrew Pac		60.00	75.0	5.00
4050AT-3071Std Cylinder Assy	300.00				4110-18Plate	e 60.00	210.00	240.0	.00
4050AT-3077T Standard Arm	115.00				4110-28Fusible Lin
4050AT-3077DEDE Arm	150.00				4110-30Cush Shoe Suppor		65.00	95.0	.00
4050AT-3038Standard Track	75.00				4110-31Cover Screv
4050AT-3038BTrack w/Bumper	80.00				4110-37Hold Open Stud
4050AT-3038HTrack w/Hold Open	100.00				4110-41Hold Open Nu	t 6.00
4050AT-3038HB Track w/Hold Open & Bumper	110.00				4110-48Hold Open Forearn
4050AT-72Standard Cover	25.00				4110-49FL FL Main Arm & Roo 4110-58 Spring & Screw (used with -80
4050AT-72MCMetal Cover	40.00				4110-56Spring & Sciew (used with -60		70.00	100.0	100
4050AT-SRTScrew Pack (incl -3034) 4050AT-TBSRTScrew Pack (incl -3034)	50.00 50.00				4110-62FL		70.00	100.0	.00
4050AT-WMSScrew Pack (Incl -3034)	50.00				4110-77EDAMain Arn
4050AT-TBWMSScrew Pack (Incl -3034)	50.00				4110-80Block (used with -58
4050AT-TORXScrew Pack (incl -3034)	65.00				4110-107 EDAMetal Templat	,
4050AT-TBTRXScrew Pack (incl -3034)	65.00				4110-107 CUSHMetal Templat	265.00
4050AT-HSRTHO Screw Pack (incl -3034H)	50.00				4110-3107T Metal Template	e 530.00
4050AT-HTBSRTHO Screw Pack (incl -3034H)	50.00				4110-159Arm Screv	v 3.00
4050AT-HWMSHO Screw Pack (incl -3034H)	50.00				4110-201Space
4050AT-HTBWMSHO Screw Pack (incl -3034H)	50.00				4110-3048FL Forearn
4050AT-HTORXHO Screw Pack (incl -3034H)	65.00				4110-3080Spring Cush Block (incl -58 & -80		150.00	100
4050AT-HTBTRXHO Screw Pack (incl -3034H)	65.00				4110-419Panel Adapte		150.00	180.0	.00
4050AT-18Plate	60.00				4110-Flat Box
4050AT-18GPlate	60.00				4110-Instruction SheetBox & Instruction Shee
4050AT-31Cover Screw	3.00				4110-REDUX KILDUX & ITSUUCTION SHEE	t 5.00
4050AT-73End Cap	10.00				4110T Series
4050AT-78DEMain Arm & Tube 4050AT-82Rod	80.00 60.00				4111(3,4)T-3071Std Cylinder Ass
4050AT-83HH Arm Set Screw	3.00				4110T-3077T Standard Arn		335.00	365.0	.00
4050AT-0311Plug	3.00				4110T-3038Standard Trac
4050AT-141-2Plug	3.00				4110T-3038B Track w/Bumpe
4050AT-159Arm Screw	3.00				4110T-3038HTrack w/Hold Oper
4050AT-169Bumper Assy	20.00				4110T-3038HBTrack w/Hold Open & Bumpe
4050AT-425Roller Lock Screw	5.00				4110T-72Standard Cove		215.00	265.0	: 00
4050AT-480Shaft Extender	55.00				4110T-72MCMetal Cove		215.00 70.00	265.0 85.0
4050AT-3034Track Roller	30.00				4110T-TBSRTScrew Pack (incl -3034	•	70.00
4050AT-3034HHold OpenTrack Roller	30.00				4110T-WMSScrew Pack (incl -3034		70.00
(0F04F30F)	30.00				1 11113 SCIEWI UCK (IIICL -3034	, 50.00	70.00	03.0
4050AT-3054Hold Open Clip 4050AT-Flat BoxFlat Box w/Label	5.00				4110T-TBWMSScrew Pack (incl -3034	) 50.00	70.00	85.0	.00.

	STANDARD POWDER	PLAT	ED FINISHES		STANDARD POWDER	PLAT	ED FINI	SHES
PARTS & ACCESSORIES	COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	PARTS & ACCESSORIES	COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 4 US 10	US 11 US 15 US 26
4110T Series continued				4310HSA-3077TStandard Ar		335.00		365.00
4110T-TORXScrew Pack (incl -3034)	65.00	85.00	100.00	4310HSA-3077DEDE Ar		385.00		415.00
4110T-TBTRXScrew Pack (incl -3034)	65.00	85.00	100.00	4310HSA-3038Standard Trai		265.00		(00.00
4110T-HSRTHO Screw Pack (incl -3034H)	50.00	70.00	85.00	4310HSA-72MCMetal Cov 4310HSA-WMSScrew Pack (incl -3034	er 90.00	265.00		490.00
4110T-HTBSRTHO Screw Pack (incl -3034H)	50.00	70.00	85.00	4310HSA-WMSScrew Pack (Incl -3034	4) 50.00 4) 50.00	70.00 70.00		85.00 85.00
4110T-HWMSHO Screw Pack (incl -3034H)	50.00	70.00	85.00	4310HSA-TORXScrew Pack (incl -3034		85.00		100.00
4110T-HTBWMSHO Screw Pack (incl -3034H)	50.00	70.00	85.00	4310HSA-TBTRXScrew Pack (incl -3034		85.00		100.00
4110T-HTORXHO Screw Pack (incl -3034H)	65.00	87.00	99.00	4310HSA-18Pla		320.00		350.00
4110T-HTBTRXHO Screw Pack (incl -3034H)	65.00	87.00	99.00	4310HSA-31		520.00		550.00
4110T-18Plate		85.00	100.00	4310HSA-61Spac
4110T-31Cover Screw	3.00			4310HSA-73End Ca
4110T-73End Cap	10.00			4310HSA-83Arm Scre
4110T-141-1Plug				4310HSA-141-2Plu
4110T-159Arm Screw	3.00			4310HSA-159Arm Scre
4110T-169Bumper Assy	20.00			4310HSA-425Roller Lock Scre
4110T-425Roller Lock Screw	5.00			4310HSA-3034Track Roll 4310HSA-3210Transform
4110T-3034Track Roller	30.00			4310HSA-3428 Scanner Modu
4110T-3034HHold Open Track Roller 4110T-3054Hold Open Clip				4410HSA-3430HSA Solenoid Harne	ss 7.00
				4310HSA-3431Input Harne
4110T-3064HHO Roller and Clip 4110T-Flat BoxFlat Box w/Label				4410HSA-3448HSA PCB Modu
4110T-Instruction Sheet	5.00 3.00			4310HSA-Flat BoxFlat Box w/Lab
4110T-Rebox KitBox & Instruction Sheet				4310HSA-Instruction SheetInstruction Sheet
	5.00			4310HSA-Rebox KitBox & Instruction She	et 5.00
4210 Series				4310ME Series
4211(6)-3071Std Cylinder Assy	370.00			4314ME-3071Std Cylinder As:	sv 1.015.00
4211(6)-3071AVBAVB Cylinder Assy	395.00			4314ME-307lB80B80 Cylinder As:
4211-3071DEL Del Action Cylinder Assy	415.00			4314ME-3071B140B140 Cylinder As:
4210-3077EDA		380.00	410.00	4314ME-3971Cylinder On	ly 950.00
4210-3077CNSCush Arm		410.00	440.00	4314ME-3971B80B80 Cylinder On
4210-3049CNSH Cush Arm 4210-72MCMetal Cover		480.00 215.00	510.00 265.00	4314ME-3971B140B140 Cylinder On
4210-TORXScrew Pack		70.00	85.00	4310ME-3077SFSwing Free Ar		335.00		365.00
4210-TBTRX Screw Pack		70.00	85.00	4310ME-3077DE		385.00		415.00
4210-18		280.00	310.00	4310ME-3038 Standard Trad 4310ME-72MCMetal Cov		265.00		490.00
4210-18CUSHPlate		280.00	310.00	4310ME-WMSScrew Pack (incl -3034		70.00		85.00
4210-30Cush Shoe Support		65.00	95.00	4310ME-TBWMSScrew Pack (incl -3034		70.00		85.00
4210-31Cover Screw				4310ME-TORXScrew Pack (incl -3034	4) 65.00	85.00		100.00
4210-61Spacer	25.00	70.00	100.00	4310ME-TBTRXScrew Pack (incl -3034		85.00		100.00
4210-159Arm Screw	3.00			4310ME-18Pla		320.00		350.00
4210-201	5.00	150.00	100.00	4310ME-31Cover Scre
4210-419Panel Adapter 4210-Flat BoxFlat Box w/Label	65.00 5.00	150.00	180.00	4310ME-61Spac
4210-Flat Box W/Labet 4210-Instruction SheetInstruction Sheet				4310ME-73End Ca
4210-Rebox KitBox & Instruction Sheet				4310ME-83Arm Scre 4310ME-141-2Plu
	5.00			4310ME-141-2
4210T Series				4310ME-425Roller Lock Scre
4211(3,4)T-3071Std Cylinder Assy	370.00			4310ME-3034Track Roll
4211(3,4)T-3071AVBAVB Cylinder Assy	395.00	2/0.00	270.00	4310ME-3210Transform
4210T-3077T Standard Arm		340.00	370.00	4310ME-3351ME Switch As:	sy 165.00
4210T-3038Standard Track 4210T-72MCMetal Cover	150.00 40.00	215.00	265.00	4310ME-3354 ME Wire Harne
4210T-72MCMetal Cover 4210T-TORXScrew Pack		70.00	265.00 85.00	4310ME-3431Input Harne
4210T-TBTRXScrew Pack		70.00	85.00	4310ME-Flat BoxFlat Box w/Lab
4210T-18Plate		280.00	310.00	4310ME-Instruction SheetInstruction She
4210T-31Cover Screw	3.00			4310ME-Rebox KitBox & Instruction She	et 5.00
4210T-159Arm Screw	3.00			4410HSA Series
4210T-3034Track Roller				4414HSA-3071Std Cylinder As:
4210T-Flat Box	5.00			4414HSA-3071/18GStd Cyl. Assy w/18
4210T-Instruction Sheet				4414HSA-3971Cylinder On		24		270.0
4210T-Rebox KitBox & Instruction Sheet	5.00			4410HSA-3077Reg Ar		340.00		370.00
4310HSA Series				4410HSA-3077L		345.00		375.00
4311HSA-3071Std Cylinder Assy	1,100.00			4410HSA-72MCMetal Cov 4410HSA-WMSScrew Pai		265.00 45.00		490.00 60.00
4311HSA-3971Cylinder Only	995.00			SCIEW Pat	LN 2J.UU	45.00		00.00
				4410HSA Series continued on next page

PRICE LIST

		STANDARD POWDER	PLATED FINISHES			STANDARD POWDER		PLATED FINISHES
PARTS & ACCESSORIES		COAT FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	PARTS & ACCESSORIES	COAT FINISHES ANCLR ANDKB	US26D	US 3 US 4 US 10	US 11 US 15 US 26
4410HSA Series continued					4510-Flat Box Flat Box w/Label	5.00
4410HSA-TBWMSScrew Pack		25.00	45.00	60.00	4510-Instruction Sheet Instruction Sheet	3.00
4410HSA-TORXScrew Pack		40.00	60.00	75.00	4510-Rebox KitBox & Instruction Sheet	5.00
4410HSA-TBTRXScrew Pack		40.00	60.00	75.00	4510T Series
4410HSA-18Plate		190.00	320.00	350.00	4511(3,4)T-3071Std Cylinder Assy	370.00
4410HSA-18GMounting Plate		190.00	320.00	350.00	4511(3,4)T-3071AVBAVB Cylinder Assy	395.00
4410HSA-31 Cover Screw		3.00			4510T-3077T Standard Arm	120.00	340.00		370.00
4410HSA-77Arm & Forearm 4410HSA-77L Long Arm & Forearm		120.00 120.00			4510T-3038Standard Track	150.00
4410HSA-79Rod & Shoe		30.00	75.00	105.00	4510T-72MCMetal Cover	40.00	215.00		265.00
4410HSA-79L Long Rod & Shoe		45.00	105.00	135.00	4510T-TORXScrew Pack	50.00	70.00		85.00
4410HSA-83HH Arm Screw		3.00			4510T-TBTRXScrew Pack	50.00	70.00		85.00
4410HSA-159Arm Screw		3.00			4510T-18Plate 4510T-31 Cover Screw	80.00 3.00	280.00		310.00
4410HSA-3210Transformer		75.00			4510T-159Arm Screw	3.00
4410HSA-3428 Scanner Module		165.00			4510T-3034Track Roller	30.00
4410HSA-3430HSA Solenoid Harness		7.00			4510T-Flat Box Flat Box w/Label	5.00
4410HSA-3431Input Harness		6.00			4510T-Instruction Sheet Instruction Sheet	3.00
4410HSA-3448HSA PCB Module 4410HSA-Flat Box Flat Box w/Label		25.00 5.00			4510T-Rebox KitBox & Instruction Sheet	5.00
4410HSA-Instruction Sheet Instruction Sheet		3.00			4630 Series
4410HSA-Rebox KitBox & Instruction Sheet		5.00			4631-3071Std Cylinder Assy	5,450.00
					4631-3071CSCyl Assy w/Conc I/O Switch	5,450.00
4410ME Series					4631-3971 Cylinder Only	1,920.00
4414ME-3071Std Cylinder Assy 4414ME-3071/18GStd Cyl. Assy w/18G		1,015.00 1,015.00			4630-3077T Standard Arm	120.00	340.00		370.00
4414ME-3071B80B80 Cylinder Assy		1,100.00			4630-3038Standard Track	75.00
4414ME-3071B80GB80 Cyl. Assy w/18G		1,100.00			4630-72MCMetal Cover	185.00	360.00		585.00
4414ME-3071B140B140 Cylinder Assy		1,100.00			4630-WMSScrew Pack (incl -3034) 4630-TBWMSScrew Pack (incl -3034)	75.00 75.00	95.00 95.00		110.00 110.00
4414ME-3071B140GB140 Cyl. Assy w/18G		1,100.00			4630-TORXScrew Pack (incl -3034)	90.00	110.00		125.00
4414ME-3971 Cylinder Only		950.00			4630-TBTRXScrew Pack (incl -3034)	90.00	110.00		125.00
4414ME-3971B80B80 Cylinder Only		950.00			4630-31 Cover Screw	3.00
4414ME-3971B140B140 Cylinder Only		950.00			4630-61Spacer	15.00
4410ME-3077Reg Arm 4410ME-3077LLong Arm		120.00 125.00	340.00 345.00	370.00 375.00	4630-73End Cap	10.00
4410ME-72MCMetal Cover		90.00	265.00	490.00	4630-78Arm & Tube	75.00	175.00
4410ME-WMSScrew Pack		25.00	45.00	60.00	4630-82Rod	60.00	120.00
4410ME-TBWMSScrew Pack		25.00	45.00	60.00	4630-83HH Arm Screw 4630-141-2Plug	3.00 3.00
4410ME-TORXScrew Pack		40.00	60.00	75.00	4630-155-1Caution Decal	5.00
4410ME-TBTRXScrew Pack		40.00	60.00	75.00	4630-155-2Activation Decal	5.00
4410ME-18Plate		190.00	320.00	350.00	4630-159Arm Screw	3.00
4410ME-18GMounting Plate 4410ME-31 Cover Screw		190.00 3.00	320.00	350.00	4630-334End Cap	40.00
4410ME-77Arm & Forearm		120.00	260.00	290.00	4630-334-2End Cap, Plain	40.00
4410ME-77L Long Arm & Forearm		120.00	260.00	290.00	4630-334CS End Cap, Concealed Switch 4630-425Roller Lock Screw	40.00 5.00
4410ME-79Rod & Shoe		30.00	75.00	105.00	4630-480Shaft Extension	55.00
4410ME-79LME Long Rod		45.00	105.00	135.00	4630-3018Mounting Plate Assy	3,200.00
4410ME-83HH Arm Screw		3.00			4630-3034Track Roller	30.00
4410ME-159Arm Screw		3.00			4630-3179-1On/Off Switch Assy	50.00
4410ME-3210Transformer 4410ME-3351ME Switch Assy		75.00 165.00			4630-3179-2Hold Open Switch Assy	50.00
4410ME-3354ME Wire Harness		15.00			4630-3180 I/O Board Assy	335.00
4410ME-3431Input Harness		6.00			4630-3454 Motor/Clutch Assy 4630-3462Controller Assy	1,590.00 1,810.00
4410ME-Flat Box Flat Box w/Label		5.00			4630-3498-1Ribbon Cable Connector	25.00
4410ME-Instruction Sheet Instruction Sheet		3.00			4630-3498-2A/C Power Cable	50.00
4410ME-Rebox KitBox & Instruction Sheet		5.00			4630-Flat Box Flat Box w/Label	5.00
4510 Series					4630-Instruction Sheet Instruction Sheet	3.00
4511(6)-3071Std Cylinder Assy		370.00			4630-Rebox KitBox & Instruction Sheet	5.00
4511(6)-3071AVBAVB Cylinder Assy		395.00			4640 Series
4511-3071DEL Del Action Cylinder Assy		415.00			4642-3071Std Cylinder Assy	5,450.00
4510-3077EDA EDA Arm		160.00	380.00	410.00	4642-3071CSCyl Assy w/Conc I/O Switch	5,450.00
4510-72MCMetal Cover 4510-TORXScrew Pack		40.00 50.00	215.00 70.00	265.00 85.00	4642-3971 Cylinder Only	1,920.00
4510-TBTRXScrew Pack		50.00	70.00	85.00	4640-3077Reg Arm	120.00	340.00		370.00
4510-18Plate		80.00	280.00	310.00	4640-3077LLong Arm	125.00	345.00		375.00
4510-31 Cover Screw		3.00			4640-72MCMetal Cover	185.00	360.00		585.00
	4510-159Arm Screw	3.00			4640 Series continued on next page

	STANDARD POWDER	PLAT	ED FINI	SHES		STANDARD POWDER			SHES
PARTS & ACCESSORIES	FINISHES ANCLR ANDKB	US26D	US 3 US 4 US 10	US 11 US 15 US 26	PARTS & ACCESSORIES	FINISHES ANCLR ANDKB	US26D	US 3 US 4 US 10	US 11 US 15 US 26
4640 Series continued					4820-18	late 250.00	380.00
4640-WMSScrew Pack	50.00	70.00		85.00	4820-18Gl		380.00	1
4640-TBWMSScrew Pack		70.00		85.00	4820-31Cover S
4640-TORXScrew Pack		85.00	1	00.00	4820-31LLong Cover S
4640-TBTRXScrew Pack		85.00	1	00.00	4820-77Arm & For		260.00
4640-31Cover Screw	3.00				4820-79Rod &		75.00
4640-77Arm & Forearm		260.00			4820-79LRLong Rod &	Shoe 55.00	115.00
4640-79Rod & Shoe	30.00	75.00			4820-83Arm S
4640-79LRLong Rod & Shoe	55.00	115.00			4820-155-1Caution [
4640-83Arm Screw	3.00				4820-155-2Activation [
4640-155-1Caution Deca					4820-159Arm S
4640-155-2Activation Deca					4820-163Cover I
4640-159Arm Screw					4820-182Stan 4820-334Cover Enc
4640-334End Cap					4820-3377
4640-334-2End Cap, Plair					4820-Flat BoxFlat Box w/l
4640-334CS End Cap, Concealed Switch					4820-Instruction SheetInstruction S
4640-480Shaft Extension					4820-Rebox KitBox & Instruction S
4640-3018Mounting Plate Assy						5.00
4640-3179-1On/Off Switch Assy 4640-3179-2Hold Open Switch Assy	50.00				4840 Series
4640-3180	50.00 335.00				4841-3071Std Cylinder
4640-3454Motor/Clutch Assy					4841-3971Cylinder
4640-3462Controller Assy	1,810.00				4840-3077EDA EDA		380.00		410.00
4640-3498-1Ribbon Cable Connecto	25.00				4840-3077CNSCush		410.00		440.00
4640-3498-2A/C Power Cable					4840-3077SCNSSpring Cush		485.00		515.00
4640-Flat BoxFlat Box w/Labe					4840-72MCMetal (		400.00		625.00
4640-Instruction SheetInstruction Sheet					4840-WMSScrew		45.00		60.00
4640-Rebox KitBox & Instruction Sheet	5.00				4840-TBWMSScrew		45.00		60.00
	5.00				4840-30Cush Shoe Sup 4840-31Cover S		45.00		60.00
4810 Series					4840-31LLong Cover S
4811-3071Std Cylinder Assy					4840-61Sr		70.00	ı
4811-3971Cylinder Only		21222			4840-124		70.00	1
4810-3077T Standard Arm		340.00	3	370.00	4840-155-1Caution [
4810-3038Standard Track		/00.00	c	:2F 00	4840-155-2Activation [
4810-72MCMetal Cove 4810-WMSScrew Pack (incl -3034)	225.00 50.00	400.00 70.00		525.00 85.00	4840-159Arm S
4810-TBWMSScrew Pack (incl -3034)	50.00	70.00		85.00	4840-163Cover I
4810-18Plate		380.00		03.00	4840-182Stan
4810-31		300.00			4840-201Sr
4810-31LLong Cover Screw					4840-334Cover End	Cap 12.00
4810-61Space					4840-419Panel Ada	pter 65.00	150.00
4810-73End Cap					4840-459 Door Loo
4810-78Arm & Tube		175.00			4840-460Pneumatic H
4810-82Roc	60.00				4840-3080 Spring Cush I
4810-83HH Arm Screw	3.00				4840-Flat BoxFlat Box w/l	abel 5.00
4810-141-2Plug	3.00				4840-Instruction SheetInstruction S
4810-155-1Caution Deca					4840-Rebox KitBox & Instruction S	neet 5.00
4810-155-2Activation Deca					5010 Series
4810-159Arm Screw					5011(2,3,4,5,6)-3071Std Cylinder	Assy 510.00	800.00		920.00
4810-163Cover Insert					5011(2,3,4,5)-3071DELDel Act Cyl		845.00		965.00
4810-182Stand Of					5010-3077Reg		340.00		370.00
4810-334Cover End Cap	12.00				5010-3049Hold Open		340.00		370.00
4810-425Roller Lock Screw	5.00				5010-WMSScrew	Pack 25.00	45.00		60.00
4810-3034 Track Rolle 4810-Flat Box Flat Box w/Labe					5010-TORXScrew		60.00		75.00
					5010-11Finish I		200.00
4810-Instruction SheetInstruction Sheet 4810-Rebox KitBox & Instruction Sheet					5010-11DA DA Finish I		200.00
	٠٠٠٠٠				5010-31Cover S
4820 Series					5010-37Hold Open
4822-3071Std Cylinder Assy					5010-41Hold Oper
4822-3071/18GStd Cylinder Assy w/18G					5010-45Hold Open
4822-3971 Cylinder Only					5010-48Hold Open For
4820-3077Reg Arm		340.00		370.00	5010-49Hold Open Main
4820-3077LLong Arm		345.00		375.00	5010-77Arm & Ford		75.00
4820-72MCMetal Cove		400.00		525.00	5010-79Rod & 1		75.00
(000 1/4/6
4820-WMSScrew Pack		45.00 45.00		60.00 60.00	5010-79HH Rod & 5010-83Arm S		75.00

	STANDARD POWDER COAT		PLATED FINISHES		STANDARD POWDER COAT
PARTS & ACCESSORIES	FINISHES AL (689) DKBRZ (695) BRASS (696) LTBRZ (691) STAT (690) BLACK (693)	US26D	US 3 US 11 US 4 US 15 US 10 US 26	PARTS & ACCESSORIES	FINISHES ANCLR ANDKB
5010 Series continued				9130-3018 Mounting Bracket	150.00
5010-83HH Arm Screw	3.00			9130-3155 Label Kit	30.00
5010-95Arm Stud	15.00			9130-3034Track Roller 9130-3351-1Switch Bracket 29"	35.00 68.00
5010-159Arm Screw	3.00			9130-3351-2Switch Bracket 41"	68.00
5010-3002 Mounting/Finish Plate	70.00			9130-3351-3Switch Bracket 51"	68.00
5010-Flat Box Flat Box w/Label 5010-Instruction Sheet Instruction Sheet	5.00 3.00			9130-3454Motor Gearbox Assembly	1,898.00
5010-Rebox KitBox & Instruction Sheet	5.00			9130-3454S Motor Gearbox Assembly w/Switch	1,898.00
				9130-3462SCStandard Control Box	1,305.00
5030 Series				9130-3498-2AA/C Power Cable - 29"	40.00
5031(3,4,5,6)-3071Std Cylinder Assy	935.00	1,225.00	1,345.00	9130-3498-2BA/C Power Cable - 42"	40.00
5031(3,4,5,6)-3971 Cylinder Only	865.00			9130-3498-2CA/C Power Cable - 52"	40.00
5030-3077Reg Arm	120.00	340.00	370.00	9130-Rebox KitBox & Instruction Sheet	5.00
5030-3049Hold Open Arm	120.00	340.00	370.00	9140 Series - (ANCLR or ANDKB only)
5030-WMSScrew Pack	25.00	45.00	60.00	9140-3077Regular Arm	120.00
5030-TORXScrew Pack	40.00	60.00	75.00	9140-3077LLong Arm	125.00
5030-37Hold Open Stud 5030-41Hold Open Nut	25.00 6.00			9140-72MC*Metal Cover	185.00
5030-48Hold Open Forearm	70.00			9140-72FC*Full Metal Cover	285.00
5030-49Hold Open Main Arm	65.00	150.00		9140-MS-HDR Screw Pack Header	25.00
5030-77Arm & Forearm	120.00	260.00		9140-MS-PUSHScrew Pack Push Arm	25.00
5030-79Rod & Shoe	30.00	75.00		9140-77Main Arm	120.00
5030-79HH Rod & Shoe	30.00	75.00		9140-79Rod	30.00
5030-83Arm Screw	3.00			9140-79LR Long Rod	45.00
5030-83HH Arm Screw	3.00			9140-163Cover Insert	12.00
5030-159Arm Screw	3.00			9140-163-1Cover End Cap Insert	12.00
5030-416 Wood Clip Set	160.00	230.00		9140-334Cover End Cap	40.00
5030-417 Wood Clip Set	160.00	230.00		9140-3018 Mounting Bracket	150.00
5030-3002 Mounting/Finish Plate	150.00	290.00		9140-3155 Label Kit 9140-3351-1Switch Bracket 29"	30.00 68.00
5030-Flat Box Flat Box w/Label	5.00			9140-3351-2Switch Bracket 41"	68.00
5030-Instruction Sheet Instruction Sheet 5030-Rebox KitBox & Instruction Sheet	3.00 5.00			9140-3351-3Switch Bracket 51"	68.00
				9140-3454Motor Gearbox Assembly	1,898.00
6030 Series				9140-3454S Motor Gearbox Assembly w/Switch	1,898.00
6031(2,3,4,5)-3071Std Cylinder Assy	1,160.00	1,450.00	1,570.00	9140-3462SCStandard Control Box	1,305.00
6031(2,3,4,5)-3971 Cylinder Only	1,000.00			9140-3498-2AA/C Power Cable - 29"	40.00
6030-3077T Standard Arm 6030-3038B Track w/Bumper	120.00 80.00	340.00	370.00	9140-3498-2BA/C Power Cable - 42"	40.00
6030-3038HB Track w/Hold Open & Bumper	110.00			9140-3498-2CA/C Power Cable - 52"	40.00
6030-WMSScrew Pack (incl -3034)	50.00	70.00	85.00	9140-Rebox KitBox & Instruction Sheet	5.00
6030-TORXScrew Pack (incl -3034)	65.00	85.00	100.00	9150 Series - (ANCLR or ANDKB only)
6030-83Arm Screw	3.00			9150-3077Regular Arm	120.00
6030-157 Snubber	15.00			9150-3077LLong Arm	125.00
6030-159Arm Screw	3.00			9150-72MC*Metal Cover	285.00
6030-169Bumper Assy	20.00			9150-MS-HDR Screw Pack Header	25.00
6030-416 Wood Clip Set	160.00	230.00		9150-MS-PULLScrew Pack Pull Arm	25.00
6030-425Roller Lock Screw	5.00			9150-MS-PUSHScrew Pack Push Arm 9150-77Main Arm	25.00 120.00
6030-3002 Mounting/Finish Plate	200.00	220.00		9150-79Rod	30.00
6030-3034Track Roller 6030-3034H Hold Open Track Roller	35.00 35.00			9150-79LR Long Rod	45.00
6030-3054Hold Open Clip	30.00			9150-163Cover Insert	12.00
6030-Flat Box Flat Box w/Label	5.00			9150-163-1Cover End Cap Insert	12.00
6030-Instruction Sheet Instruction Sheet	3.00			9150-334Cover End Cap	40.00
6030-Rebox KitBox & Instruction Sheet	5.00			9150-36024v SO Kit	25.00
9130 Series - (ANCLR or ANDKB only)				9150-3018 Mounting Bracket	150.00
9130-3077T Standard Arm	120.00			9150-3155 Label Kit	30.00
9130-3077PLCM Standard Arm w/Track	262.00			9150-3351-1Switch Bracket 29" 9150-3351-2Switch Bracket 41"	68.00 68.00
9130-3038 Track	75.00			9150-3351-3Switch Bracket 51"	68.00
9130-72MC*Metal Cover	185.00			9150-3454Motor Gearbox Assembly	1,898.00
9130-72FC*Full Metal Cover	285.00			9150-3454S Motor Gearbox Assembly w/Switch	1,898.00
9130-MS-HDR Screw Pack Header	25.00			9150-3462SCStandard Control Box	1,305.00
9130-MS-PULLScrew Pack Pull Arm	25.00			9150-3498-2AA/C Power Cable	40.00
9130-73 Track End Cap	10.00			9150-Rebox KitBox & Instruction Sheet	5.00
9130-163Cover Insert	12.00			9530 Series - (ANCLR or ANDKB only)
9130-163-1Cover End Cap Insert	12.00			9530-3077T Standard Arm	250.00
9130-334Cover End Cap	40.00
9130-36024v SO Kit	25.00			9530 Series continued on next page

		STANDARD POWDER COAT			STANDARD POWDER COAT
		FINISHES			FINISHES
		ANCLR			ANCLR
DADTC 1	ACCECCODICC	ANDKB	DARTE & ASSES	CODIEC	ANDKB
PARIS&	ACCESSORIES		PARTS & ACCES	SORIES

9530 Series continued			0==0 0===:::
	Standard Arm w/Track	362.00	9550-3572HL*
	Track	75.00	9550-MS-HDR
	Header Asv	350.00	9550-MS-PULL 9550-MS-PUSH
	Double Door Header Assy	600.00	9550-11A
	Screw Pack Header	25.00	9550-11B
	Screw Pack Pull Arm	25.00	9550-12*
9530-11A	Spindle Plate - 2 3/4"	80.00	9550-18*
	Spindle Plate - 3 3/4"	80.00	**Add 3 1/2" it	f Using Angled Brackets	5
	Blank Filler Plate	95.00	9550-77	Main Arm	n 200.00
9530-18*	Mounting Plate**	80.00 / ft	9550-79	Rod & Shoe	60.00
	3 1/2" if Using Angled Brackets		9550-79LR	Long Rod & Shoe	60.00
	Track End Cap	10.00	9550-82
	Mounting Bracket - 2 3/4"	105.00	9550-82L
	Header Endcap	45.00	9550-275Mo
	Angled Bracket	167.00	9550-334
	End Dress Plate	80.00	9550-334-1	Angled Bracke	t 167.00
	Mounting Bracket - 3 3/4" Dress Plate Extrusion Only	105.00	9550-334-2
	Dress Plate Extrusion Unity	20.00 / ft 95.00	9550-375Mc
	Header Extrusion Only	95.00 57.00 / ft	9550-511Dre
	Header Extrosion Only	228.00	9550-518
	Double Door Header Only	483.00	9550-5729550-572HL
	Rear Mount Bracket	105.00	9550-982
	Track Roller	35.00	9550-3018	Rear Mount Bracke	t 105.00
9530-3155	Label Kit	30.00	9550-3034
9530-3454	Motor Gearbox (Std Force)	2,373.00	9550-3155
	Controller	1,543.00	9550-3454Mo
9540 Series -	(ANCLR or ANDKB	only)	9550-3462
	Regular Arm	240.00	OEEO Corios /AN	ICI D or ANDICI	P only/
	Long Arm	250.00	9560 Series - (AN 9560-3077
9540-3572HL*	Header Asy	350.00	9560-3077L
	Double Door Header Assy	600.00	9560-3077T
	Screw Pack Header	25.00	9560-3077PLCM
	Screw Pack Push Arm	25.00	9560-3038
	Spindle Plate - 2 3/4"	80.00	9560-3572HL*
	Spindle Plate - 3 3/4"	80.00	9560-MS-HDR
	Blank Filler Plate	95.00 80.00.7ft	9560-MS-PULL
	Mounting Plate** 3 1/2" if Using Angled Brackets	80.00 / ft	9560-MS-PUSH
	Main Arm	200.00	9560-11A	Spindle Plate - 2 3/4	" 75.00
	Rod & Shoe	60.00	9560-11B
	Long Rod	60.00	9560-12*
	Rod	40.00	9560-18*
9540-82L	Long Rod	40.00		f Using Angled Brackets
	Mounting Bracket - 2 3/4"	105.00	9560-77
	Header Endcap	45.00	9560-79
	Angled Bracket	167.00	9560-79LR 9560-82
	End Dress Plate	80.00	9560-82L
	Mounting Bracket - 3 3/4"	105.00	9560-275Mo
	Dress Plate Extrusion Only	20.00 / ft	9560-334
	Cable/Parts Bag	95.00	9560-334-1
	Header Extrusion Only	57.00 / ft	9560-334-2
	Bouble Door Header Only	221.00	9560-375Mo
	Rear Mount Bracket	483.00 105.00	9560-511*Dre
	Label Kit	30.00	9560-518
	Motor Gearbox (Std Force)	2,373.00	9560-572*
	Controller	1,543.00	9560-572HL*
			9560-3018
	(ANCLR or ANDKB		9560-3034
Y55U-3U//	Regular Arm	500.00	9560-3155Mo
חבבת אחדיי			9710U-7474 MO	IOI GEALDOX CSTO FORCE	. / 1/1/10
9550-3077L		500.00
9550-3077T	Standard Arm Standard Arm w/Track	500.00 500.00 362.00	9560-3462

Senior Swing, Basic Parts Diagram (2800 / 9500 Series)

Benchmark Basic Parts Diagram (9100 Series)

GLOSSARY OF ABBREVIATIONS

Arm Options

STD - Standard Arm REG - Regular Arm

Rw/PA - Regular Arm w/ Parallel Arm Shoe Rw/62A - Regular Arm w/ Auxiliary Parallel Arm Shoe

H - Hold Open Arm

Hw/PA - Hold Open Arm w/ Parallel Arm Shoe

HD - Heavy Duty Arm (1460)

HDw/PA - Heavy Duty Arm w/ Parallel Arm Shoe

LD - Light Duty Arm

LDw/PA - Light Duty Arm w/ Parallel Arm Shoe

LONG - Long Arm XLONG - Extra Long Arm HLONG - Hold Open Long Arm EDA - Extra Duty Arm

EDAw/62G - Extra Duty Arm w/ Thick Hub Shoe HEDA - Hold Open Extra Duty Arm

HEDAw/62G - Hold Open Extra Duty Arm w/ 62G CUSH (CNS) - Cush -n- Stop Arm

HCUSH (HCNS) - Hold Open Cush -n- Stop Arm SCUSH (SCNS) - Spring Cush -n- Stop Arm SHCUSH (SHCNS) - Spring Hold Open Cush -n- Stop Arm

SF - Swing Free Arm (4310ME) DE - Double Egress Arm FL - Fusible Link Arm

Cylinder Options

STD - Standard Cylinder DEL (DA) - Delay Action Cylinder AVB - Advanced Variable Backcheck B80 - Bypass 80 Degree ME Cylinder B140 - Bypass 140 Degree ME Cylinder TEL - Telephone Cylinder (4010/4020/4110)

Cover Options

STD - Standard Plastic Cover

MC - Metal Cover FC - Full Cover (1460)

DS (DS1) - Designer Series Cover (1460)

Track Options

STD - Standard Track H - Hold Open Track

BUMPER - Track with Bumper HBMP - Hold Open Track with Bumper

Header Options

Fastener Pack Options

WMS - Wood & Machine Screws

TBWMS - Thru-Bolt, Wood & Machine Screws SRT - Self Reaming & Tapping Screws

TBSRT - Thru-Bolt, Self Reaming & Tapping Screws

TORX - TORX Machine Screws

TBTRX - Thru-Bolt, TORX Machine Screws

Finishes

AL - Aluminum DKBRZ - Dark Bronze BRASS - Brass LTBRZ - Light Bronze STAT - Statuary BLACK - Black MTLPC - Bright Metallic

RAL - Custom Finish Designation (RAL xxxx)

ANCLR - Anodized Clear ANDKB - Anodized Dark Bronze

Swing Operator Terms

SF - Standard Force Motor Gearbox

SC - Standard Controller POS - Positive Mechanical Stop BKY - Breakaway Stop

Miscellaneous Terms

L - Long LR - Long Rod ELR - Extra Long Rod

B80 or B140 - Bypass (Fire/Life Safety) SRI - Special Rust Inhibitor

SE - Single Point Electronic (Fire/Life Safety) ME - Multi-Point Electronic (Fire/Life Safety)

PAH - Parallel Arm Holder (PAH60)

ES - Electric Strike (Control Boxes) S (SEQ) - Sequential (Control Boxes)

TJ - Top Jamb PA - Parallel Arm 18G - Flush Ceiling T - Track

DPS - Door Position Switch (2210DPS)

FP - Fire Protection Fluid


Part	Extrusion (36˝ to 188˝) No Prep	Single Door* (36˝ to 49˝) (50˝ Prepped	Door Pair to 98˝) Prepped	Double Door Header** Prepped	Gearbox Brackets Included	Angle Brackets Included	End Caps Included	Filler Plates Included	Stop Prep*** Included
-572	X
-572HL		X	X
-572HL/S		X	X						X
-572DD				X
-572DD/S				X					X
-3572HL		X	X		X	X	X	X
-3572HL/S		X	X		X	X	X	X	X
-3572DD				X	X	X	X	X
-3572DD/S				X	X	X	X	X	X

^{*2810, 9530} or 9540 only **2850, 2860, 9550 or 9560 only *** 2810, 2850 or 2860 only

A library of common wiring diagrams are available at no-charge for use in single and double door applications utilizing various configurations of Allegion door hardware products. These diagrams and much more can be accessed through our Knowledge Center tool at http://kc.allegion.com/, simply click on the link Common wiring diagrams.

Custom Wiring Diagrams

When common wiring diagrams do not meet the needs of the job requirements, Allegion offers a service to purchase custom wiring diagrams. All custom wiring diagrams include a point-to-point drawing, a riser diagram, and a detailed theory of operation. Custom wiring diagrams fall into two categories; Standard and Complex.

ⁿ Standard drawings: All Allegion products with a single opening and a basic theory of operation. These drawings will be quoted a NET $250 for each drawing
ⁿ Complex drawings: Generic contacts, 3rd party components, complex relay logic, timer circuit logic, any other additional advanced logic. Drawings that fall under this type will receive a NET quote depending on the time required to complete the drawings at an hourly rate of $200/hour with a $250 minimum NET

How to Request a Quote for a Custom Wiring Diagram

ⁿ Custom wiring diagrams can only be ordered by and shipped to current Allegion Channel Partners
ⁿ Wiring Diagram Request Forms can be obtained by:
- Sending an email request to Wiring.Diagram.Request@allegion.com
- Using the online Distributor Portal under; My Support / Orders & Invoicing
- Using the form located on the following page
ⁿ Once completed, email the completed request form to Wiring.Diagram.Request@allegion.com for processing
- Be sure and include the following information to prevent delays to the request:
All supporting documentation for non-Allegion products
Hardware list with complete part numbers
Detailed Theory of operation for all openings
ⁿ Upon receipt the custom wiring coordinator will review and clarify the request as needed
ⁿ Once all clarifications are resolved a QUOTE#, NET pricing, and lead time will be assigned and communicated to the requestor within 1 business day
ⁿ QUOTE# is valid for 90 days
ⁿ A purchase order with the QUOTE# must be received for the wiring diagrams to be produced
- Send the completed PO to Wiring.Diagram.Request@allegion.com
ⁿ Lead time is generally 2-3 weeks from time PO is received, more complex requests will have longer lead times
ⁿ Changes to the original request after a quote approval may incur additional charges and affect lead time
ⁿ Completed custom wiring diagrams will be emailed to the requestor

Notes

Wiring Diagram Request Form

Must be a Schlage Electronics, LCN, or Von Duprin Dealer


Date//	Project Name
Dealer/Distributor
	Account # Dealer Contact Name Phone


Provide a Primary Technical Contact		Phone


	Provide/Attach the Following
	n All supporting documentation for all non-Allegion products.
	n Included hardware list with complete part numbers.
	n Detailed Theory of Operation for all openings.
	Additional information that helps expedite the project:
	Door Number; Door Size; Door Material;

Fire Rated Opening; Single/Pair; Double Egress; Interior/Exterior; Interlocked Opening; Basic Floor Plan/Traffic Flow

E-mail completed form and supporting documentation to

Wiring.Diagram.Request@allegion.com Phone: 877-671-7011

LCN Limited Warranty

Subject to the terms and conditions of this limited warranty, Schlage Lock Company, LLC (the "Company') extends a limited warranty against defects in material and workmanship for its LCN branded product(s) identified in the Product Table below ("Products") as installed in the original location.

This limited warranty applies to Products purchased on or after March 3, 2014 .

Product Table

4000 Series	30 Years
4050 Series	25 Years
1460 Series	30 Years
1450 Series	25 Years
1260 Series	20 Years
1250 Series	15 Years
Concealed, High Security (except 2210DPS)	15 Years
Automatic Operators; SE, ME, HSA, SEH Series; SEM Magnets; 2210 DPS (includes both electronic and mechanical components)	2 Years

Term: The limited warranty period for Products is as stated in the Product Table above. The "Commencement Date" for a limited warranty period shall be the date of Company's delivery to the original purchaser of the Products. Proof of Product purchase may be required by Company to confirm the Commencement Date.

What Company will do: Company may require proof of Product purchase in order to provide coverage under this limited warranty. As Company's only responsibility and user's only remedy under this limited warranty, Company will furnish a replacement Product upon receipt and confirmation by Company, in its sole opinion, that the Product has, in fact, failed due to a manufacturing defect under normal use and maintenance. In the event a replacement Product cannot be provided, Company will either provide a suitable replacement Product or a refund in the amount of the original purchase price.

What is not covered: The following costs, expenses, and damages are not covered by the provisions of this limited warranty: (i) labor costs including, but not limited to, such costs as removal and installation of Product; (ii) shipping and freight expenses required to return Product to Company; (iii) failures, defects, or damage caused by any third party product or service; (iv) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages.

The provisions of this limited warranty do not apply to Product that is: (i) not the proper size for the application for which the Product is used; (ii) not installed in accordance with Company's published Product installation instructions; (iii) installed with improper parts and/or incorrect parts (NOTE: It is recommended that Product be installed with LCN fasteners provided with Product); (iv) improperly stored, maintained, or operated; (v) modified, repaired, or altered in Company's sole opinion, in any manner, without the express written consent of Company; (vi) used for purposes for which the Product is not designed or intended; (vii) subjected to misuse, abuse, negligence, or accident; or (vii) subjected to improper temperature, humidity, or other environmental conditions.

Note: 900/7900 Series compressors are not manufactured by Company and are excluded from coverage under this limited warranty. For more information, parts, or repairs concerning the compressors, contact the compressor manufacturer directly at (269) 926-6171.

Additional Terms: This limited warranty is in lieu of all other warranties, express or implied. Company does not authorize any person to create for it any obligation or liability in connection with Product. Company's maximum liability hereunder is limited to the original purchase price of the Product. No action arising out any claimed breach of this limited warranty by Company may be brought by the user more than one (1) year after the cause of action has arisen.

How local law applies: This limited warranty gives you specific legal rights, and you may also have other rights as permitted by law. Some local laws do not allow limitations on how long an implied warranty lasts or the exclusions or limitation of incidental or consequential damages so the limitations or exclusions provided herein may not apply to you.

Program and Warranty Claims: If Product is to be claimed to be defective under this limited warranty, contact Customer Care at (877) 671-7011.

Note: Please contact LCN Customer Care prior to returning any product back to the factory. You will need prior authorization and an RMA for your return.

About Allegion

Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises 27 global brands, including strategic brands CISA ®, Interflex ®, LCN ®, Schlage ® and Von Duprin ®.

For more, visit www.allegion.com

2020 LCN Price Book

Included is the LEGACY FORMAT of the price book for your reference only.

This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.

Administrative Offices

Placing orders

Customer Care

Sales Support

Technical Product Support

Closers

Request for Quote

Carolinas

Central

Chicago

Florida

Great Lakes

Metro New York

Michigan

Mid Atlantic North

Mid Atlantic South

Midwest

Mountain States

New England

North Central

Northern California

Northwest

South

Southern California

Southwest

Toyac

TABLE OF CONTENTS

HOW TO ORDER CLOSERS, COMPONENTS, PARTS & ACCESSORIES

SPECIAL NOTES

Powder Coated Finishes

Standard Powder Coated Finishes

Optional Custom Powder Coated Finishes

Optional SRI

Optional Plated Finishes

ORDER FORM

Allegion General Terms and Conditions of Sale and Service

2. ORDERS.

3. PRICES, INVOICES AND PAYMENT.

4. QUOTATIONS.

9. INSPECTION AND DELIVERY.

16. CONFIDENTIAL INFORMATION.

Terms and Conditions

23. CONSUMER PRODUCTS

33. COMPLIANCE WITH APPLICABLE LAWS.

DEFINITIONS.

DOOR CLOSER SPECIALISTS

The LCN formula for success

Materials

Heat-Treated

Extensive Abuse Test

Special Templates

Forged Steel Arms

Chrome Silicon

Hydraulic Fluid

Customer Service

United State Minimum Advertised Pricing Policy (MAP) for LCN

Commercial Product MAP Schedule

Manufacturer Suggested Retail Price:

PRICE LIST

PRICE LIST

PRICE LIST

PRICE LIST

SEM SERIES MAGNETS

SEM7800 Series Magnet Extension Kits

PAH60, PAINT AND FASTENERS

Green Hex Wrenches - NOW AVAILABLE!

CONTROL BOXES AND COMPRESSORS

CONTROL BOX COMPONENTS

Control Box Components

ACTUATORS & ACCESSORIES

8310 Series Actuators - Jamb Mount - 1-1/2" x 4-3/4" Rectangle - Interior Installation Only

8310 Series Actuators - Wall Mount - 4-1/2" Round

8310 Series Actuators

8310 Series Actuators - Wall Mount - 4-3/4" Square

8310 Series Actuators - Wall Mount - 4-3/4" Square

8310 Series Actuators

ACTUATORS & ACCESSORIES